Some programs want to change some values for the network interfaces
configuration in /proc/sys/net/ipv[46] folders. Giving RW access on them
allows wicked to work on openSUSE 13.2+.
Reusing the lxcNeedNetworkNamespace function to tell
lxcContainerMountBasicFS if the netns is disabled. When no netns is
set up, then we don't mount the /proc/sys/net/ipv[46] folder RW as
these would provide full access to the host NICs config.
https://bugzilla.redhat.com/show_bug.cgi?id=1172015
The refactoring done as part of commit id '59446096' caused a regression
for the multi initiator IQN commit '6aabcb5b' because the sendtargets was
not done on/for the initiator IQN prior to login (or trying to disable
autologin)
Prior to that commit, the paths were essentially
virStorageBackendISCSIStartPool
virStorageBackendISCSILogin
virStorageBackendISCSIConnection
if initiatoriqn
virStorageBackendCreateIfaceIQN
Issue sendtargets
Perform --login
else
Issue sendtargets
Perform --login
After that commit:
virStorageBackendISCSIStartPool
Issue sendtargets
Call virStorageBackendISCSIConnection
If initiatoriqn
virStorageBackendCreateIfaceIQN
Perform --login
else
Perform --login
So for non initiator IQN paths, nothing changed. For the initiator path,
the --login fails as does any attempts to change autologin via "--op update
--name node.startup --value manual".
In old version of parted like parted-2.1-25, error message is shown in
stdout when printing a disk info without disk label.
Error: /dev/sda: unrecognised disk label
This line has been moved to stderr in newer version of parted. So we
should check both stdout and stderr when locating this message.
This should fix bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1172468
Signed-off-by: Hao Liu <hliu@redhat.com>
When user doesn't have read access on one of the domains he requested,
the for loop could exit abruptly or continue and override pointer which
pointed to locked object.
This patch fixed two issues at once. One is that domflags might have
had QEMU_DOMAIN_STATS_HAVE_JOB even when there was no job started (this
is fixed by doing domflags |= QEMU_DOMAIN_STATS_HAVE_JOB only when the
job was acquired and cleaning domflags on every start of the loop.
Second one is that the domain is kept locked when
virConnectGetAllDomainStatsCheckACL() fails and continues the loop when
it didn't end. Adding a simple virObjectUnlock() and clearing the
pointer ought to do.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If we want to perform some operation and domain state is not suitable
for that operation, we should report error VIR_ERR_OPERATION_INVALID.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
When PrlJob_GetRetCode sets second argument to
error value it means sdk function failed and we
must return error from getJobResultHelper.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return error code, returned by parallels SDK from
waitJob and getJobResult, so that caller can handle
different errors.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Get cdrom devices list from parallels server in
prlsdkLoadDomains and add ability to define a domain
with cdroms.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
First, we don't need to call prlsdkApplyConfig after
creating new VM or containers, because it's done in
functions prlsdkCreateVm and prlsdkCreateCt.
No need to check, if domain exists in the list after
prlsdkAddDomain.
Also organize code, so that we can call virObjectUnlock
in one place.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch replaces code, which creates domains by
running prlctl command.
prlsdkCreateVm/Ct will do prlsdkApplyConfig, because
we send request to the server only once in this case.
But prlsdkApplyConfig will be called also from
parallelsDomainDefineXML function. There is no problem with
it, parallelsDomainDefineXML will be refactored later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Rewrite code, which applies domain configuration given
to virDomainDefineXML function to the VM of container
registered in PCS.
This code first check if there are unsupported parameters
in domain XML and if yes - reports error. Some of such
parameters are not supported by PCS, for some - it's not
obvious, how to convert them into PCS's corresponding params,
so let's put off it, and implement only basic params in
this patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Change domain state using parallels SDK functions instead of
prlctl command.
We don't need to send events from these functions now, becase
events handler will send them. But we still need to update
virDomainObj in privconn->domains.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Subscribe to events from parallels server. It's
needed for 2 things: to update cached domains list
and to send corresponding libvirt events.
Parallels server sends a lot of different events, in
this patch we handle only some of them. In the future
we can handle for example, changes in a host network
configuration or devices states.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Move macro parallelsDomNotFoundError to file parallels_utils.h, because
it will be used in parallels_sdk.c.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about domains using parallels sdk instead of prlctl.
prlsdkLoadDomains functions behaves as former parallelsLoadDomains with
NULL as second parameter (name) - it fills parallelsConn.domains list.
prlsdkLoadDomain is now able to update specified domain by given
virDomainObjPtr.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1082521
Support for shared hostdev's was added in a number of commits, initially
starting with 'f2c1d9a80' and most recently commit id 'fd243fc4' to fix
issues with the initial implementation. Missed in all those changes was
the need to mimic the virSELinux{Set|Restore}SecurityDiskLabel code to
handle the "shared" (or shareable) and readonly options when Setting
or Restoring the SELinux labels.
This patch will adjust the virSecuritySELinuxSetSecuritySCSILabel to not
use the virSecuritySELinuxSetSecurityHostdevLabelHelper in order to set
the label. Rather follow what the Disk code does by setting the label
differently based on whether shareable/readonly is set. This patch will
also modify the virSecuritySELinuxRestoreSecuritySCSILabel to follow
the same logic as virSecuritySELinuxRestoreSecurityImageLabelInt and not
restore the label if shared/readonly
https://bugzilla.redhat.com/show_bug.cgi?id=1171582
When we edit a negative controller address number to a device,
some of them will auto generate a controller with invalid index
number. This will make guest disappear after restart libvirtd.
Instead of allowing negative number for controller index, we
should forbid negative number in these place (we did this before,
but after f18c02ec, virStrToLong_ui changed to allow negative
number). Therefore switch to virStrToLong_uip in these places.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Avoid leaving the domain locked on a failed ACL check in
qemuDomainMigratePerform() and qemuDomainMigrateFinish2().
Introduced in commit abf75aea24 (Add ACL checks into the QEMU driver).
The module XML::XPath is needed when building from git only (no need to
have it when building from tarball), so this patch moves the check from
specfile into bootstrap.conf.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Several portability changes, but the one we are most interested in
is the improvement to bootstrap to detect perl modules.
This patch doesn't actually change our bootstrap requirements
(that will be a separate patch), but sets the stage for it.
* .gnulib: Update to latest.
* bootstrap: Regenerate from upstream.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit c75425734 introduced a compilation failure:
../../src/access/viraccessdriverpolkit.c: In function 'virAccessDriverPolkitCheck':
../../src/access/viraccessdriverpolkit.c:137:5: error: format '%d' expects argument of type 'int', but argument 9 has type 'pid_t' [-Werror=format=]
VIR_DEBUG("Check action '%s' for process '%d' time %lld uid %d",
^
Since mingw pid_t is 64 bits, it's easier to just follow what we've
done elsewhere and cast to a large enough type when printing pids.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Add cast.
Signed-off-by: Eric Blake <eblake@redhat.com>
lxcProcessSetupInterfaces() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
qemuNetworkIfaceConnect() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
(an audit of the two callers to qemuNetworkIfaceConnect() confirms
that it is never called for any other type of network, so the dead
code in the else statement (logging an internal error if it is called
for any other type of network) is eliminated in the process.)
When libvirt is managing the MAC table of a Linux host bridge, it must
turn off learning and unicast_flood for each tap device attached to
that bridge, then add a Forwarding Database (fdb) entry for the tap
device using the MAC address from the domain interface config.
Once we have disabled learning and flooding, any packet that has a
destination MAC address not present in the fdb will be dropped by the
bridge. This, along with the opportunistic disabling of promiscuous
mode[*], can result in enhanced network performance. and a potential
slight security improvement.
[*] If there is only one device on the bridge with learning/unicast_flood
enabled, then that device will automatically have promiscuous mode
disabled. If there are *no* devices with learning/unicast_flood
enabled (e.g. for a libvirt "route", "nat", or isolated network that
has no physical device attached), then all non-tap devices will have
promiscuous mode disabled (tap devices always have promiscuous mode
enabled, which may be a bug in the kernel, but in practice has 0
effect).
None of this has any effect for kernels prior to 3.15 (upstream kernel
commit 2796d0c648c940b4796f84384fbcfb0a2399db84 "bridge: Automatically
manage port promiscuous mode"). Even after that, until kernel 3.17
(upstream commit 5be5a2df40f005ea7fb7e280e87bbbcfcf1c2fc0 "bridge: Add
filtering support for default_pvid") traffic will not be properly
forwarded without manually adding vlan table entries. Unfortunately,
although the presence of the first patch is signalled by existence of
the "learning" and "unicast_flood" options in sysfs, there is no
reliable way to query whether or not the system's kernel has the
second of those patches installed, the only thing that can be done is
to try the setting and see if traffic continues to pass.
When the bridge device for a network has macTableManager='libvirt' the
intent is that all kernel management of the bridge's MAC table
(Forwarding Database, or fdb, in the case of a Linux Host Bridge) be
disabled, with libvirt handling updates to the table instead. The
setup required for the bridge itself is:
1) set the "vlan_filtering" property of the bridge device to 1.
2) If the bridge has a "Dummy" tap device used to set a fixed MAC
address on the bridge (which is always the case for a bridge created
by libvirt, and never the case for a bridge created by the host system
network config), turn off learning and unicast_flood on this tap (this
is needed even though this tap is never IFF_UP, because the kernel
ignores the IFF_UP flag of devices when using their settings to
automatically decide whether or not to turn off promiscuous mode for
any attached device).
(1) is done both for libvirt-created/managed bridges, and for bridges
that are created by the host system config, while (2) is done only for
bridges created by libvirt (i.e. for forward modes of nat, routed, and
isolated bridges)
There is no attempt to turn vlan_filtering off when destroying the
network because in the case of a libvirt-created bridge, the bridge is
about to be destroyed anyway, and in the case of a system bridge, if
the other devices attached to the bridge could operate properly before
destroying libvirt's network object, they will continue to operate
properly (this is similar to the way that libvirt will enable
ip_forwarding whenever a routed/natted network is started, but will
never attempt to disable it if they are stopped).
At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.
(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)
When the actualType of a virDomainNetDef is "network", it means that
we are connecting to a libvirt-managed network (routed, natted, or
isolated) which does use a bridge device (created by libvirt). In the
past we have required drivers such as qemu to call the public API to
retrieve the bridge name in this case (even though it is available in
the NetDef's ActualNetDef if the actualType is "bridge" (i.e., an
externally-created bridge that isn't managed by libvirt). There is no
real reason for this difference, and as a matter of fact it
complicates things for qemu. Also, there is another bridge-related
attribute (macTableManager) that will need to be available in both
cases, so this makes things consistent.
In order to avoid problems when restarting libvirtd after an update
from an older version that *doesn't* store the network's bridgename in
the ActualNetDef, we also need to put it in place during
networkNotifyActualDevice() (this function is run for each interface
of each domain whenever libvirtd is restarted).
Along with making the bridge name available in the internal object, it
is also now reported in the <source> element of the <interface> state
XML (or the <actual> subelement in the internally-stored format).
The one oddity about this change is that usually there is a separate
union for every different "type" in a higher level object (e.g. in the
case of a virDomainNetDef there are separate "network" and "bridge"
members of the union that pivots on the type), but in this case
network and bridge types both have exactly the same attributes, so the
"bridge" member is used for both type==network and type==bridge.
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
These two functions use netlink RTM_NEWNEIGH and RTM_DELNEIGH messages
to add and delete entries from a bridge's fdb. The bridge itself is
not referenced in the arguments to the functions, only the name of the
device that is attached to the bridge (since a device can only be
attached to one bridge at a time, and must be attached for this
function to make sense, the kernel easily infers which bridge's fdb is
being modified by looking at the device name/index).
I'm about to make block stats optionally more complex to cover
backing chains, where block.count will no longer equal the number
of <disks> for a domain. For these reasons, it is nicer if the
statistics output includes the source path (for local files).
This patch doesn't add anything for network disks, although we
may decide to add that later.
With this patch, I now see the following for the same domain as
in the previous patch (one qcow2 file, and an empty cdrom drive):
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.0.path=/var/lib/libvirt/images/foo.qcow2
block.1.name=hdc
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document
new field.
* tools/virsh.pod (domstats): Document new field.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Return the new
stat for local files/block devices.
(QEMU_ADD_NAME_PARAM): Add parameter.
(qemuDomainGetStatsInterface): Update caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed that for an offline domain, 'virsh domstats --block $dom'
was producing just the domain name, with no stats. But the older
'virsh domblkinfo' works just fine on offline domains. This patch
starts to get us closer, by at least reporting the disk names for
an offline domain.
With this patch, I now see the following for an offline domain
with one qcow2 disk and an empty cdrom drive:
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.1.name=hdc
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Don't short-circuit
output of block name.
Signed-off-by: Eric Blake <eblake@redhat.com>
At least with 'virsh domstats --block' on an offline domain, we
currently output no stats even though we recognize the stat
category. Although a later patch will improve this situation,
it is better to document that this is expected behavior.
Also, while the current implementation rejects filtering flags
for virDomainListGetStats, this limitation may be lifted in the
future and we do not enforce it at the API level.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document
that recognized stats might not be reported.
(virDomainListGetStats): Likewise, and tweak filtering documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemuDomainGetStatsBlock() could leak a stats hash table if it
encountered OOM while populating the virTypedParameters.
Oddly, the fix doesn't even touch qemuDomainGetStatsBlock :)
* src/qemu/qemu_driver.c (QEMU_ADD_COUNT_PARAM)
(QEMU_ADD_NAME_PARAM): Don't return early.
(qemuDomainGetStatsInterface): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever client socket was marked as closed for some reason, it could've
been changed when really closing the connection. With this patch the
proper reason is kept since the first time it's marked as closed.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Each command that needs a connection causes a new connection to be
made. Reconnecting after a command failed is pointless, mainly when
there is no other command to run. Removeing three lines of code takes
care of that and keeps virsh working as it should.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
