Of the two callers one simply iterates over the returned paths and the
second one appends the returned paths to another linked list. Simplify
all of this by directly returning a linked list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two distinct uses of an arbitrary buffers size when querying
the device mapper. One is related to loading the /proc/devices file,
while the other is used as buffer for ioctls to the devmapper.
Split up the macros used here so that it's clear that they are not meant
for the same thing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the unlikely case that we were unable to set the new
identity, we would unref the old one even though it still
could be in the thread-local storage.
Fixes: c6825d8813
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Clang on Rawhide started to complain that @tmp variable in
virSCSIDeviceListDel() is set but not used. This is obviously a
false positive because the variable is used to free device stolen
from the list. Anyway, we can do without the variable so in this
specific case let's fix our code to appease Clang.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virPCIDeviceIsBehindSwitchLackingACS() function checks
whether given PCI device is not behind a switch that lacks ACS.
It does so by starting at given device and traversing up, one
parent at time towards the root. The parent device is obtained
via virPCIDeviceGetParent() which allocates new virPCIDevice
structure. For freeing the structure we use g_autoptr() and a
temporary variable @tmp. However, Clang fails to understand our
clever algorithm and complains that the variable is set but never
used. This is obviously a false positive, but using a small trick
we can shut Clang up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Simon Rowe <simon.rowe@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using 'virsh freepages' or 'virsh allocpages' then
virHostMemGetFreePages() or virHostMemAllocPages() is called,
respectively. But the following may happen: libvirt was built
without numactl support and thus a fake NUMA node was constructed
for capabilities, which means that startCell is going to be 0.
But we can't blindly pass startCell = 0 to virNumaGetPageInfo()
nor virNumaSetPagePoolSize() because they would operate over node
specific path (/sys/devices/system/node/nodeX) rather than NUMA
agnostic path (/sys/kernel/mm/hugepages/) and we are not
guaranteed that the former exists (kernel might have been built
without NUMA support).
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1978574
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemAllocPages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemGetFreePages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When setting O_CLOEXEC flag on received FD fails the FD is closed
using VIR_FORCE_CLOSE(). But the call is wrapped in errno save
which is not necessary because VIR_FORCE_CLOSE() preserves errno
value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Warn these error instead of return when removing qos or queues. This will
avoid residual qos clearance on multiple interfaces.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate virNetDevOpenvswitchInterfaceClearQos into two steps. When setting
qos, we can set only rx or tx and the other one should be cleared.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add vmuuid notes on virNetDevOpenvswitchInterfaceSetQos,
and change vmid to vmuuid.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For new feature Fibre Channel VMID we will need to get inode of the
VM root cgroup as it is used in the new kernel API together with VMID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We need this in order to validate XML against schema at one
place, rather than have the same code for validation in different
functions.
I will add '--validate' option to more virsh commands soon and
this makes it easier as virXMLParse() is called in every one I
plan to change.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the conversion from virPCIVirtualFunctionList which encapsulates
the list of virtual functions to two disjunct arrays.
This greatly simplifies the fetching of the parameters as well as
cleanup in the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virNetDevGetVirtualFunctions' calls 'virPCIGetVirtualFunctions' and
then re-iterates the returned list to fetch the interface names for the
returned virtual functions.
If we move the fetching of the interface name into
virPCIGetVirtualFunctions we can simplify the code and remove a bunch of
impossible error states.
To accomplish this the function is renamed to
'virPCIGetVirtualFunctionsFull' while keeping a wrapper with original
name and if the physical port ID is passed the interface name is fetched
too without the need to re-convert the address into a sysfs link.
For now 'virNetDevGetVirtualFunctions' still converts the returned data
into two lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a struct for holding the list of VFs returned by
virPCIGetVirtualFunctions so that we can employ automatic memory
clearing and also allow querying more information at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently query the host MSRs to determine if TSC scaling is
supported. This works OK when running privileged and can open
the /dev/cpu/0/msr. When unprivileged we fallback to querying
MSRs from /dev/kvm. This is incorrect because /dev/kvm only
reports accurate info for MSRs that are valid to use from inside
a guest. The TSC scaling support MSR is not, thus we always end
up reporting lack of TSC scaling when unprivileged.
The solution to this is easy, because KVM can directly report
whether TSC scaling is available, which matches what QEMU will
do at startup.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/188
Reported-by: Roman Mohr <rmohr@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
VIR_APPEND_ELEMENT doesn't report any errors now so we can remove
VIR_APPEND_ELEMENT_QUIET and replace all uses by VIR_APPEND_ELEMENT
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it was an alias to VIR_APPEND_ELEMENT. Use virAppendElement
directly until VIR_APPEND_ELEMENT is refactored too and we'll be able to
get rid of VIR_APPEND_ELEMENT_QUIET completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT_COPY which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT_INPLACE and VIR_APPEND_ELEMENT_COPY_INPLACE already
ignore the return value from 'virInsertElementsN' which allows a trivial
conversion to virAppendElement without the need for 'ignore_value'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new wrapper calls virInsertElementInternal with the appropriate
arguments without any checks which are unnecessary for appension. This
allows to have no return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split out the code doing the movement of the elements and insertion from
the range checks. This will help in adding an error-free version for
appension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea of @add was that the insersion/appension macros would allow
adding more than one element but this feature was never implemented.
'add' is nowadays used as a dummy variable consuming the result of the
VIR_TYPEMATCH compile time check.
Make it obvious that we don't use 'add' by renaming it to
'typematchDummy', marking it as unused and replacing all occurences
where the value was used by literal '1'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a version of virPidFileForceCleanupPath that takes
a 'group' bool argument and propagate it all the way
down to virProcessKillPainfullyDelay.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When loop in function virNVMeDeviceListCreateReAttachList() there may be
reused index @i, this patch fix this by using a new @j.
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add helper function virHostCPUGetHaltPollTime to obtain halt polling
time. If the kernel support halt polling time statistic, and mount
debugfs. This function will take effect on KVM VMs.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use function virFileReadValueUllongQuiet to read unsigned long
long value without error report.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Declare the function with G_GNUC_WARN_UNUSED_RESULT as we always want to
use the returned value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
