It belongs to virDomainLoaderDefParseXMLNvram(), where the other
parts of the <nvram> element are handled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the 'type' attribute is present we'd end up overwriting
this value via virDomainStorageSourceParse(). Moving this
assignment makes the current code clearer and will also help
with upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous name was identical, modulo the case, to the
completely unrelated virDomainNVRAMDefParseXML().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pure code movement, needed to prepare for upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
An explicit limit would be more user friendly. Add the limit to error message.
Before this commit:
```
error: requested size must be smaller than or equal to @size
```
Now:
```
error: requested size must be smaller than or equal to @size (8388608KiB)
```
Signed-off-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add <interleave> to allow the subproperties to be specified in any
order.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Evaluate the XPath as a boolean, instead of trying to get a node
out of it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Internally we already collect x86 host family + model + stepping
numeric values. This exposed them in capabilities CPU output.
Example:
$ sudo virsh capabilities | grep -A1 -B1 signature
<microcode version='240'/>
<signature family='6' model='94' stepping='3'/>
<counter name='tsc' frequency='3408010000' scaling='no'/>
Users need to know these values to calculate an expected.
SEV-ES/SEV-SNP launch measurement.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Even when the os.loader element is absent, we still have to
validate that the user is not attempting to use firmware
autoselection with a driver that doesn't implement the feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an element to configure the thread pool size:
...
<binary>
<thread_pool size='16'/>
</binary>
...
https://bugzilla.redhat.com/show_bug.cgi?id=2072905
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The check was historically done only for _TYPE_VOLUME disks, but
refactors to allow _TYPE_VOLUME disks in the backing chain caused a
regression where we'd reject startupPolicy also for _TYPE_BLOCK disks
which historically worked well.
Fix it by using the 'virDomainDiskDefValidateStartupPolicy' helper and
use it only when the top level image is a _TYPE_VOLUME as in other cases
it was already validated. This also allows _TYPE_BLOCK volumes to use
startup policy.
Fixes: 37f01262eed9f37dd5eb7de8b83edd2fea741054
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2095758
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our startup policy checkers work only for local paths, so disk sources
such as NVMe, or vhost-user can't be used with startup policy.
Unfortunately the validation did not catch these cases. Fix it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into 'virDomainDiskDefValidateStartupPolicy' which will be
later reused in the qemu driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove linebreak and mention the attribute name. Also prepare the error
messages for future by substituting the type of offending access.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the function to use modern XML formatting machinery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
This patch introduces the logic to format and parse remote NVRAM.
Update NVRAM element schema, and docs for supporting network backed
NVRAM. NVRAM backed over network would give the flexibility to start
the VM on any host without having to worry about where to get the latest
nvram image.
<nvram type='network'>
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi-nopool/0'>
<host name='example.com' port='6000'/>
</source>
</nvram>
or
<nvram type='file'>
<source file='/var/lib/libvirt/nvram/guest_VARS.fd'/>
</nvram>
In the qemu driver we will support the new definition only with qemu's
supporting -blockdev.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Introduce virDomainLoaderDefFormatNvram and extract the code to it so
that it's self-contained in upcoming patches adding more complex logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Currently, libvirt allows only local filepaths to specify the location
of the 'nvram' image. Changing it to virStorageSource type will allow
supporting remote storage for nvram.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
As of v7.0.0-877-g70ac26b9e5 QEMU exposes its default event loop
for devices with no IOThread assigned as an QMP object. In the
very next commit (v7.0.0-878-g71ad4713cc) it was extended for
thread-pool-min and thread-pool-max attributes. Expose them under
new <defaultiothread/> element.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At least in case of QEMU an IOThread is actually a pool of
threads (see iothread_set_aio_context_params() in QEMU's code
base). As such, it can have minimal and maximal number of worker
threads. Allow setting them in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, iothread configuration structure (virDomainIOThreadIDDef)
is allocated by plain g_new0(). This is perfectly okay because
all members of the struct default to value 0 anyway. But soon
this is going to change. Therefore, replace those g_new0() with a
function so that the default value can be set consistently in one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Formatting iothreads is currently open coded inside of
virDomainDefFormatInternalSetRootName(). While this works, it
makes the function needlessly long, especially if the formatting
code will expand in near future. Therefore, move it into a
separate function. At the same time, make
virDomainDefIothreadShouldFormat() accept const domain definition
so that the new function can also accept const domain definition.
Formatters shouldn't need to change definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In virDomainIOThreadIDDefArrayInit() the variable @iothrid is
used only inside a loop but is declared for whole function. Bring
the variable into the loop so that it's obvious that the variable
is not used elsewhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Using g_autoptr() for @iothrid variable inside
virDomainDefParseIOThreads() allows us to drop explicit call to
virDomainIOThreadIDDefFree() in one case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new "post-copy failed" reason for the running state will be used on
the destination host when post-copy migration fails while the domain is
already running there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virStorageSourceGetActualType() function returns either
virStorageSource->type (which is of type virStorageType), or
virStorageSourcePoolDef->type, which really stores a value of the
same enum. Thus, the latter struct can be changed so that the
virStorageSourceGetActualType() function can return correct type
instead of generic int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
There are three places (two in domain_conf.c and one in
qemu_migration.c) where a virStorageSource->type is typecasted to
virStorageType (for the purpose of catching missing enum member
in a switch() statement at compile time). This is needless,
because as of v8.2.0-rc1~120 the struct member is of proper type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Commit a1465e661e7 added the 'manual' disk snapshot mode documentation
but didn't allow it in the schema as default snapshot mode for a disk.
Add the needed value into the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainObj struct has @pid member where the domain's
hypervisor PID is stored (e.g. QEMU/bhyve/libvirt_lxc/... PID).
However, we are not consistent when it comes to shutoff state.
Initially, because virDomainObjNew() uses g_new0() the @pid is
initialized to 0. But when domain is shut off, some functions set
it to -1 (virBhyveProcessStop, virCHProcessStop, qemuProcessStop,
..).
In other places, the @pid is tested to be 0, on some other places
it's tested for being negative and in the rest for being
positive.
To solve this inconsistency we can stick with either value, -1 or
0. I've chosen the latter as it's safer IMO. For instance if by
mistake we'd kill(vm->pid, SIGTERM) we would kill ourselves
instead of init's process group.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
If input device has one of virtio* models set then it has to go
onto virtio bus. Introduce such check into the validator.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2081981
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are some formatting problems with virDomainInputDefValidate().
Reformat it to our standards. Use this opportunity to move error
messages onto a single line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add the new introduced sysfs attribute dev_busid which provides the address
of the device in the subchannel independent from the bound device driver.
It is added if available in the sysfs as optional channel_dev_addr element into
the css device capabilty providing the ccw deivce address attributes cssid,
ssid and devno.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor out nodedev ccw address schema for easy reuse later.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move ccw device address XML parsing into new method for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adjust method name virDomainDeviceCCWAddressParseXML to
virCCWDeviceAddressParseXML.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainDeviceCCWAddressEqual into virccw and rename method as
virCCWDeviceAddressEqual.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainDeviceCCWAddressIsValid into virccw and rename method
as virCCWDeviceAddressIsValid.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainCCWAddressIncrement into virccw and rename method as
virCCWDeviceAddressIncrement.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move virDomainCCWAddressAsString into virccw and rename method as
virCCWDeviceAddressAsString.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor ccw data structure virDomainDeviceCCWAddress into util virccw.h
and rename it as virCCWDeviceAddress.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The USB device redirection works in a similar way as Spice. The
underlying 'dbus' channel is set to "org.qemu.usbredir" by default for
the client to identify the channel purpose (as specified in -display
dbus documentation).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
