The code executed later when creating a snapshot makes all decisions
based on the configured type rather than the actual type of the existing
file, while the check whether the file exists is based solely on the
on-disk type.
Since a block device is allowed to exist even when not reusing existing
files in contrast to regular files this creates a potential for a block
device to squeak past the check but then be influenced by other code
executed later. Specifically this is a problem when creating a snapshot
with the following XML:
<domainsnapshot>
<disks>
<disk name='vdb' type='file'>
<source file='/dev/sdb'/>
</disk>
</disks>
</domainsnapshot>
If the snapshot creation fails, '/dev/sdb' will be removed because it's
considered to be a regular file by the cleanup code.
Add a check that will force that the configured type matches the on-disk
state.
Additional supporting reason is that qemu stopped to accept block
devices with the 'file' backend, thus the above configuration will not
work any more. This allows us to fail sooner.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1972145
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case when the snapshot target is of VIR_STORAGE_TYPE_BLOCK type and
doesn't exist libvirt won't be able to create it. Reject such a config
sooner.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the 'else if' branches into nested conditions so that it's more
obvious when we'll be adding additional checks later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsFillDomainDeviceGraphicsCaps fills data needed both for
validation of the graphics type and also for correct display in the
(dom)capablities XML.
Signal the support for egl-headless only when qemu has the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Next commit will modify the code so that it validates whether
egl-headless is present. Certain tests need to get the egl-headless
capability to keep working properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
egl-headless graphics can be compiled out in qemu so we need to be able
to know whether the given qemu version support it.
Base the capability on the presence of the 'egl-headless' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Platforms supported by libvirt have the following Xen versions
openSUSE Leap 15.2: 4.13
openSUSE Leap 15.3: 4.14
Fedora 33: 4.14
Ubuntu 18.04: 4.9
Ubuntu 20.04: 4.11
Debian Stable: 4.11
Bumping the minimum version doesn't allow us to drop much code, but it
does provide better alignment with libvirt's platform support statement.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The DAC security driver has an option to register a callback that
is called instead of chown(). So far QEMU is the only user of
this feature and it's used to set labels on non-local disks (like
gluster), where exists notion of owners but regular chown() can't
be used.
However, this callback (if set) is called always, even for local
disks. And thus the QEMU's implementation duplicated parts of the
DAC driver to deal with chown().
If the DAC driver would call the callback only for non-local
disks then the QEMU's callback can be shorter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I must admit, I have no idea why we build such POSIX dependent
code as DAC driver for something such not POSIX as WIN32. Anyway,
the code which is supposed to set error is not doing that. The
proper way is to mimic what chown() does:
On error, -1 is returned, and errno is set to indicate the error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As shown in the previous commit, @path can be NULL. However, in
that case @src->path is also NULL. Therefore, trying to "fix"
@path to be not NULL is not going to succeed. The real value of
NULLSTR() is in providing a non-NULL string for error reporting.
Well, that can be done in the error reporting without overwriting
argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virSecurityDACSetOwnershipInternal() function accepts two
arguments (among others): @path and @src. The idea being that in
some cases @path is NULL and @src is not and then @path is filled
from @src->path. However, this is done in both callers already
(because of seclabel remembering/recall). Therefore, this code in
virSecurityDACSetOwnershipInternal() is dead, effectively.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virSecurityDACSetOwnershipInternal() has two callers and in
both the private data (@priv) is obtained via
virSecurityManagerGetPrivateData(). But in case of DAC driver the
private data can never be NULL. This is because the private data
is allocated in virSecurityManagerNewDriver() according to
.privateDataLen attribute of secdriver. In case of DAC driver the
attribute is set to sizeof(virSecurityDACData).
NB, no other function within DAC driver checks for !priv.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a function that frees individual items on the chown
list and declare and use g_autoptr() for it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The NVRAM label is set in qemuSecuritySetAllLabel(). There's no
need to set its label upfront. In fact, setting it twice creates
an imbalance because it's unset only once which mangles seclabel
remembering. However, plain removal of the
qemuSecurityDomainSetPathLabel() undoes the fix for the original
bug (when dynamic ownership is off then the NVRAM is not created
with cfg->user and cfg->group but as root:root). Therefore, we
have to switch to virFileOpenAs() and pass cfg->user and
cfg->group and VIR_FILE_OPEN_FORCE_OWNER flag. There's no need to
pass VIR_FILE_OPEN_FORCE_MODE because the file will be created
with the proper mode.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1969347
Fixes: bcdaa91a27
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Docs are not sanitized, thus there's no point in building them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
126db34a81 had previously switched various
flows over to this from VIR_ERR_OPERATION_FAILED.
This change simply does the same for qemuDomainDetachPrepDisk,
qemuDomainDetachPrepInput and qemuDomainDetachPrepVsock to allow
management apps to centralise their error handling on just
VIR_ERR_DEVICE_MISSING for missing devices during a detach.
Signed-off-by: Lee Yarwood <lyarwood@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If given file is not found in $PATH then g_find_program_in_path()
returns NULL. However, g_canonicalize_filename() does not accept
NULL as input.
Fixes: 65c2901906
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use automatic memory freeing for the string list so that we can remove
the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'rbd_image_spec_t' struct has two string members 'id' and
'name'. We only stole the 'name' members thus the 'id's as well as the
whole list would be leaked on success.
Restructure the code so that we copy out the image names and call
rbd_image_spec_list_cleanup on success rather than on error.
The error path is then handled by using g_autofree for 'images'.
Since we no longer have a error path after allocating the returned
string list we can completely remove its cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't care about the number of elements in the string
list so we don't have to calculate it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's just one caller who cares (testQemuMonitorJSONGetTPMModels). Fix
it and remove the counting of elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This refactors multiple aspects of the function:
1) Use automatic memory freeing
2) Remove need to check element count in the returned arrays
3) Fixes questionable code linebreaks
4) Removes reuse of variables
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers pass in NULL-terminated string lists. Remove the 'nvalues'
argument and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the capability getters which return a string list do in fact return
a NULL-terminated list so we can use g_auto(GStrv) to free it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing and remove the cleanup section.t
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto(GStrv) for clearing the string list and thus remove the
'cleanup' section and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing to simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing to simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'g_autoptr' for the two temporary JSON objects and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsFillDomainDeviceGraphicsCaps fills data needed both for
validation of the graphics type and also for correct display in the
(dom)capablities XML.
Signal the support for SDL only when qemu has the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Next commit will modify the code so that it validates whether SDL is
present. Certain tests need to get the SDL capability to keep working
properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
SDL graphics can be compiled out in qemu so we need to be able to know
whether the given qemu version support it.
Base the capability on the presence of the 'sdl' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The command allows to query various display-related options. The absence
of the command will be used to imply certain video-related capabilities
before we would be able to detect them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
IOThreads are supported with all 3 currently supported buses which can
have virtio devices (PCI, CCW, MMIO) , so there's no need for this check.
Additionally this check was buggy in the current location as on e.g.
hotplug cases the address may not yet be assigned for the disk and thus
a bogus error would be printed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1970277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
