Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all the cgroup data into separate files out of vircgroupmock.c
and rework the fopen function to load data from files. This will
make it easier to add more test cases.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Use flags in virCgroupAddTaskInternal instead of boolean parameter.
Following patch will add new flag to indicate thread instead of process.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If we are on host with systemd we need to build cgroup hierarchy
ourselves for controllers that are not managed by systemd.
As a starting parent we need to force root group because
virCgroupMakeGroup() takes that parent in order to inherit values
for cpuset controller.
By default cpuset controller is managed by systemd so we will never
hit the issue but for v2 cgroups we need to use parent cgroup every
time.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If virCgroupEnableMissingControllers() fails it could have already
created some directories, we should clean it up as well.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If available, use b_info->nested_hvm instead of
b_info->u.hvm.nested_hvm. This will make nested HVM config available
also for PVH domains.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Otherwise starting PVH guest will result in "arch_setup_bootlate:
mapping shared_info failed (pfn=..., rc=-1, errno: 12): Internal error".
After this change the behavior is the same as in `xl`.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Specifically, list sub-elements and where they can be used. In addition,
describe supported machine types for Xen.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Commit 40b5c99a modified the virConfGetValue callers to use
virConfGetValueString. However, using the virConfGetValueString
resulted in leaking the returned @value string in each case.
So, let's modify each instance to use the VIR_AUTOFREE(char *)
syntax. In some instances changing the variable name since
@value was used more than once.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since lxcConvertSize already creates an error message, there
is no need to use an error: label in lxcSetMemTune to just
overwrite or essentially rewrite the same error. So remove
the label.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Coverity noted that each of the fmemopen called used the strlen value
in order to allocate space, but that neglected space for terminating
null string. So just add 1 to the strlen.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In virDomainMemoryDefParseXML and virDomainVideoDefParseXML if
the VIR_ALLOC fails and NULL is returned, then the alteration
to ctxt->node isn't reversed.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We're passing size_t but using format for unsigned long.
Introduced in latest vshTable rework patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces a new rule to check misaligned stuff in parenthesis:
1. For misaligned arguments of function
2. For misaligned conditions of [if|while|switch|...]
There're too much misalignment, so it adds a temporary filter which
permits 'src/util' now. It _should_ be removed as soon as fixing all.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght calculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght canculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
I've moved all the printing from cmdDomblkinfoPrint() to cmdDomblkinfo(),
and renamed the cmdDomblkinfoPrint() to cmdDomblkinfoGet(), since nature of
that function changed from gathering and printing informations only to
gathering information. This I believe simplifies the functions and
makes the implementation of vshTable API simpler.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
In a following case:
virsh start $domain
service libvirtd stop
<shutdown> the guest from within the $domain
service libvirtd start
Notice that PCI devices which have been assigned to the $domain will
still be bound to stub drivers instead rebound to host drivers.
In that case the call stack is like below:
libvirtd start
qemuProcessReconnect
qemuProcessStop (because $domain was shutdown without
libvirtd event to process that)
qemuHostdevReAttachDomainDevices
qemuHostdevReAttachPCIDevices
virHostdevReAttachPCIDevices
However, because qemuHostdevUpdateActiveDomainDevices was called
after the qemuConnectMonitor, the setup of the tracking of each
host device in the $domain on either the activePCIHostdevs list
or inactivePCIHostdev list will not occur in an orderly manner.
Therefore, virHostdevReAttachPCIDevices just neglects these host PCI
devices which are bound to stub drivers and doesn't rebind them to
host drivers.
This patch fixs that by moving qemuHostdevUpdateActiveDomainDevices before
qemuConnectMonitor during libvirtd reconnection processing.
Signed-off-by: Wu Zongyong <cordius.wu@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the new qemuDomainRemoveInactiveJobLocked to remove the
@obj during the virDomainObjListForEach call which holds a
lock on the domain object list.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainRemoveInactiveJobLocked which copies
qemuDomainRemoveInactiveJob except of course calling
another new helper qemuDomainRemoveInactiveLocked.
The qemuDomainRemoveInactiveLocked is a copy of
qemuDomainRemoveInactive except that instead of calling
virDomainObjListRemove it calls virDomainObjListRemoveLocked.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce qemuDomainRemoveInactiveJobCommon to handle what will
be the common parts of the code with a new function that will
be used to call virDomainObjListRemoveLocked instead of the
unlocked variant.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
A bunch of SCSI test cases in qemuxml2argv used
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
...);
instead of the intended
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
...);
which is used correctly in qemuxml2xml. Fix them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We already prefer them in capabilities, and domcapabilities
should be consistent with that.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The new implementation contains less duplicated code and
is easier to extend.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we have reduced the number of sensible options down
to either the native QEMU binary or RHEL's qemu-kvm, we can
make virQEMUCapsInitGuest() a bit simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Both Fedora's qemu-kvm and Debian's/Ubuntu's kvm are nothing
more than paper-thin wrappers around the native QEMU binary,
so we gain nothing by looking for them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When the guest is native, we are currently looking at
potential KVM binaries regardless of whether or not we have
already located a QEMU binary suitable to run the guest.
This made sense back when KVM support was not part of QEMU
proper, but these days the KVM binaries are in most cases
just trivial wrapper scripts around the native QEMU binary
so it doesn't make sense to poke at them unless they're
the only binaries on the system, such as when running on
RHEL.
This will allow us to simplify both virQEMUCapsInitGuest()
and virQEMUCapsInitGuestFromBinary().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When running an armv7l guest on an aarch64 hosts, the
qemu-system-aarch64 binary should be our first choice instead
of qemu-system-arm since the former can take advantage of KVM
acceleration.
Move the special case to virQEMUCapsFindBinaryForArch() so
that it's handled along with all other cases rather than on
its own later on.
Doing so will also make further refactoring easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
