This patch partially reverts previous commit 91a00424 and moves the post
parse function to xenParseSxpr. This update is required because xen
driver calls xenParseSxpr directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
My commit 674afcb09e moved computing the
default listen address from qemuMigrationPrepareAny to
qemuMigrationPrepareIncoming. However, I didn't notice listenAddress was
later passed to qemuMigrationStartNBDServer. Thus, it would be called
with the original value of listenAddress (NULL).
Let's add the updated listen address to qemuProcessIncomingDef and use
it when starting NBD servers.
Reported-by: Michael Chapman <mike@very.puzzling.org>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Most of the changes to the list of active and inactive PCI devices
happen in virHostdev, where they are properly logged.
virPCIDeviceDetach() and virPCIDeviceReattach(), however, change the
inactive list as well, so they should be logging similar messages.
Instead of misusing a const string to hold up runtime allocated
data, introduce new variable @hoststr and obey const correctness.
==6879== 15 bytes in 1 blocks are definitely lost in loss record 68 of 1,064
==6879== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==6879== by 0xA7DDF97: vasprintf (in /lib64/libc-2.21.so)
==6879== by 0x552BBC6: virVasprintfInternal (virstring.c:493)
==6879== by 0x552BCDB: virAsprintfInternal (virstring.c:514)
==6879== by 0x54FA44C: virLogHostnameString (virlog.c:468)
==6879== by 0x54FAB0F: virLogVMessage (virlog.c:645)
==6879== by 0x54FA680: virLogMessage (virlog.c:531)
==6879== by 0x54FBBF4: virLogParseOutputs (virlog.c:1130)
==6879== by 0x11CB4F: daemonSetupLogging (libvirtd.c:685)
==6879== by 0x11E137: main (libvirtd.c:1297)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Once @hostname is printed into @hoststr we don't need it anymore.
==6879== 5 bytes in 1 blocks are definitely lost in loss record 10 of 1,064
==6879== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==6879== by 0xA7ED599: strdup (in /lib64/libc-2.21.so)
==6879== by 0x552C126: virStrdup (virstring.c:726)
==6879== by 0x553B13E: virGetHostnameImpl (virutil.c:720)
==6879== by 0x553B1BF: virGetHostnameQuiet (virutil.c:741)
==6879== by 0x54FA3FD: virLogHostnameString (virlog.c:462)
==6879== by 0x54FAB0F: virLogVMessage (virlog.c:645)
==6879== by 0x54FA680: virLogMessage (virlog.c:531)
==6879== by 0x54FBBF4: virLogParseOutputs (virlog.c:1130)
==6879== by 0x11CB4F: daemonSetupLogging (libvirtd.c:685)
==6879== by 0x11E137: main (libvirtd.c:1297)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML. Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start. So let's forget about old generated paths
and also stop putting them into the persistent definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1278068
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If no port number was provided for a storage pool libvirt defaults to
port 6789; however, librbd/librados already default to 6789 when no port
number is provided.
In the future Ceph will switch to a new port for the Ceph monitors since
port 6789 is already assigned to a different application by IANA.
Port 6789 is assigned to SMC-HTTPS and Ceph now has port 3300 assigned as
the 'Ceph monitor' port.
In this case it is the best solution to not hardcode any port number into
libvirt and let librados handle the connection.
Only if a user specifies a different port number we pass it down to librados,
otherwise we leave it blank.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
merge
It could happen that rbd_list() returns X names, but that while
refreshing the pool one of those RBD images is removed from Ceph
through a different route then libvirt.
We do not need to error out in such case, we can simply ignore the
volume and continue.
error : volStorageBackendRBDRefreshVolInfo:289 :
failed to open the RBD image 'vol-998': No such file or directory
It could also be that one or more Placement Groups (PGs) inside Ceph
are inactive due to a system failure.
If that happens it could be that some RBD images can not be refreshed
and a timeout will be raised by librados.
error : volStorageBackendRBDRefreshVolInfo:289 :
failed to open the RBD image 'vol-893': Connection timed out
Ignore the error and continue to refresh the rest of the pool's
contents.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
It could be that we error out while the RBD image has not been
opened yet. This would cause us to call rbd_close() on pointer
which has not been initialized.
Set it to NULL by default and only close if it is not NULL.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently pkg build of master branch fails:
[ 300s] + /usr/lib/rpm/brp-boot-scripts
[ 300s] E: File `virtlogd' is missing `Required-Start', please add even if empty!
[ 300s] W: File `virtlogd' is missing `Required-Stop', please add even if empty!
[ 300s] E: File `virtlogd' has empty `Default-Start', please specify default runlevel(s)!
[ 300s] ERROR: found one or more broken init or boot scripts, please fix them.
[ 300s] For more information about LSB headers please read the manual
[ 300s] page of of insserv by executing the command `man 8 insserv'.
[ 300s] If you don't understand this, mailto=werner@suse.de
[ 300s] error: Bad exit status from /var/tmp/rpm-tmp.44965 (%install)
Add the required tags, fix the existing tags.
Use soft dependency "Should-Start" because virtlogd may work without network.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
The virtlogd initscript's lock file should go in /var/lock/subsys/, not
(the nonexistent) /var/log/subsys/.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hda' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'aeb1078ab' added a buildPool option and failure path which
calls virStoragePoolObjRemove, which unlocks the pool, clears the 'pool'
variable, and goto cleanup. However, at cleanup virStoragePoolObjUnlock
is called without check if pool is non NULL.
Commit id '70ffa02fc' added the data.file.append option to some
VIR_DOMAIN_CHR_TYPE_FILE cases in switch statements allowing the
code to "fall through" for the remainder of the cases. This causes
angst in code profiling tools, like Coverity since there is no break;
followed by more case conditions. Adjust the logic to be more specific
within each case.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
For completeness, use the VIR_TRISTATE_SWITCH_ABSENT for data.file.append
comparisons. Commit ids '70ffa02f' and '53a15aed' just went with the non
zero comparison.
We have few code samples there that are almost unreadable when formatted
because they are not indented properly. By indenting them they are
formatted as code and hence quite readable. Also adjust descriptions to
be comments and add semicolons so that the code sample looks like sample
of a working code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While reviewing 1b43885d17 I've noticed a virReportError()
followed by a goto endjob; without setting the correct return
value. Problem is, if block job is so fast that it's bandwidth
does not fit into ulong, an error is reported. However, by that
time @ret is already set to 1 which means success. Since the
scenario can be hardly considered successful, we should return a
value meaning error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to debug logs like this:
virPCIGetDeviceAddressFromSysfsLink:2432 : Attempting to resolve device path from device link '/sys/class/net/eth1/device/virtfn6'
logStrToLong_ui:2369 : Converted '0000:07:00.7' to unsigned int 0
logStrToLong_ui:2369 : Converted '07:00.7' to unsigned int 7
logStrToLong_ui:2369 : Converted '00.7' to unsigned int 0
logStrToLong_ui:2369 : Converted '7' to unsigned int 7
virPCIGetDeviceAddressFromSysfs:1947 : virPCIDeviceAddress 0000:07:00.7
virPCIGetVirtualFunctions:2554 : Found virtual function 7
printed *once for each SR-IOV Virtual Function* of a Physical Function
each time libvirt retrieved the list of VFs (so if the system has 128
VFs, there would be 900 lines of log for each call), the debug logs on
any system with a large number of VFs was dominated by "information"
that was possibly useful for debugging when the code was being
written, but is now useless for debugging of any problem on a running
system, and only serves to obscure the real useful information. This
overkill has no place in production code, so this patch removes it.
The previous error message just indicated that the desired response
couldn't be found, this patch tells what was desired, as well as
listing out the entire table that had been in the netlink response, to
give some kind of idea why it failed.
I noticed in a log file that we had failed to set a MAC address. The
log said which interface we were trying to set, but didn't give the
offending MAC address, which could have been useful in determining the
source of the problem. This patch modifies all three places in the
code that set MAC addresses to report the failed MAC as well as
interface.
This used to return 'unkown' and that was not correct.
A vol-dumpxml now returns:
<volume type='network'>
<name>image3</name>
<key>libvirt/image3</key>
<source>
</source>
<capacity unit='bytes'>10737418240</capacity>
<allocation unit='bytes'>10737418240</allocation>
<target>
<path>libvirt/image3</path>
<format type='raw'/>
</target>
</volume>
The RBD driver will now error out if a different format than RAW
is provided when creating a volume.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Valgrind complained:
==28277== 38 bytes in 1 blocks are definitely lost in loss record 298 of 957
==28277== at 0x4A06A2E: malloc (vg_replace_malloc.c:270)
==28277== by 0x82D7F57: __vasprintf_chk (in /lib64/libc-2.12.so)
==28277== by 0x52EF16A: virVasprintfInternal (stdio2.h:199)
==28277== by 0x52EF25C: virAsprintfInternal (virstring.c:514)
==28277== by 0x52B1FA9: virFileBuildPath (virfile.c:2831)
==28277== by 0x19B1947C: storageDriverAutostart (storage_driver.c:191)
==28277== by 0x19B196A7: storageStateAutoStart (storage_driver.c:307)
==28277== by 0x538527E: virStateInitialize (libvirt.c:793)
==28277== by 0x11D7CF: daemonRunStateInit (libvirtd.c:947)
==28277== by 0x52F4694: virThreadHelper (virthread.c:206)
==28277== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==28277== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Valgrind complained:
==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 188 of 996
==18990== at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990== by 0x5292E9B: virAllocN (viralloc.c:191)
==18990== by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990== by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990== by 0x222228CE: qemuMigrationPrepareAny (qemu_migration.c:3463)
==18990== by 0x22224121: qemuMigrationPrepareDirect (qemu_migration.c:3865)
==18990== by 0x22251C25: qemuDomainMigratePrepare3Params (qemu_driver.c:12414)
==18990== by 0x5389EE0: virDomainMigratePrepare3Params (libvirt-domain.c:5107)
==18990== by 0x1278DB: remoteDispatchDomainMigratePrepare3ParamsHelper (remote.c:5425)
==18990== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==18990== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==18990==
==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 189 of 996
==18990== at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990== by 0x5292E9B: virAllocN (viralloc.c:191)
==18990== by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990== by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990== by 0x222249D2: qemuMigrationRun (qemu_migration.c:4395)
==18990== by 0x22226365: doNativeMigrate (qemu_migration.c:4693)
==18990== by 0x22228E45: qemuMigrationPerform (qemu_migration.c:5553)
==18990== by 0x2225144B: qemuDomainMigratePerform3Params (qemu_driver.c:12621)
==18990== by 0x539F5D8: virDomainMigratePerform3Params (libvirt-domain.c:5206)
==18990== by 0x127305: remoteDispatchDomainMigratePerform3ParamsHelper (remote.c:5557)
==18990== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
If we're replacing the NBD data, it's simplest to free the old object
(including the disk list) and allocate a new one.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Valgrind complained:
==23975== Conditional jump or move depends on uninitialised value(s)
==23975== at 0x22255FA6: qemuDomainGetBlockJobInfo (qemu_driver.c:16538)
==23975== by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975== by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975== by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975== by 0x52F4668: virThreadHelper (virthread.c:206)
==23975== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
==23975==
==23975== Conditional jump or move depends on uninitialised value(s)
==23975== at 0x22255FB4: qemuDomainGetBlockJobInfo (qemu_driver.c:16542)
==23975== by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975== by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975== by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975== by 0x52F4668: virThreadHelper (virthread.c:206)
==23975== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
If no matching block job is found, qemuMonitorGetBlockJobInfo returns 0
and we should not write anything to the caller-supplied
virDomainBlockJobInfo pointer.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So you have a libvirt volume that you want to wipe out. But lets
say that the volume is actually a file stored on a journaled
filesystem. Overwriting it with zeroes or a pattern does not mean
that corresponding physical location on the disk is overwritten
too, due to journaling. It's the same story with network based
volumes, copy-on-write filesystems, and so on. Since there is no
way that an userland application can write onto specific areas on
disk, all that we can do is document the fact.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In case of prlsdkLoadDomains fails, vzOpenDefault should
clear connection privateData pointer every time its
memory is actually freed.
Also it is not necessary to call vzConnectClose if a call
to vzOpenDefault fails, because they both make cleanup of
connection privateData.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
Currently, there is no possibility for user to specify desired behaviour of
output to file - truncate or append. This patch adds an ability to explicitly
specify that user wants to preserve file's content on reopen.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
prlsdkCleanupBridgedNet call should be made strongly after
any actual domain deletion accurs. By doing this we avoid
any potential problems connected with second undefine call
when it is made after first one fails by some reason, and
we detect that network is already deleted.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Currently vz driver unregisters domains when undefine is called,
which is wrong because it contradicts with expected behavior.
All vz domains are persistent, which means that when one is
defined a new bundle directory containing meta data is created.
Undefining domains in a way we do now leaves those directories
undeleted, which prevents subsequent define call for the same
domain xml. I.e. the following sequence define->undefine->define
doesn't work now.
The patch fixes the problem by calling PrlVm_Delete instead of
PrlVm_Unreg detaching all disks prior actually doing this to
prevent images deletion.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We want to eventually factor out the code dealing with device detaching
and reattaching, so that we can share it and make sure it's called eg.
when 'virsh nodedev-detach' is used.
For that to happen, it's important that the lists of active and inactive
PCI devices are updated every time a device changes its state.
Instead of passing NULL as the last argument of virPCIDeviceDetach() and
virPCIDeviceReattach(), pass the proper list so that it can be updated.
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
This internal function supports, in theory, binding to a different
stub driver than the one the PCI device has been configured to use.
In practice, it is only ever called like
virPCIDeviceBindToStub(dev, dev->stubDriver);
which makes its second parameter redundant. Get rid of it, along
with the extra string copy required to support it.
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
From: Ian Campbell <ian.campbell@citrix.com>
xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).
xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.
This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.
The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).
Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
Although they've been present for quite a while, they weren't added
to the API definition, so add them there to make it clearer.
Currently only the RBD backend even checks for any flags.
The initial commit '74951eade' did not include the proper check for whether
any flags are supported by the driver.
Even though the driver doesn't support VIR_STORAGE_VOL_DELETE_ZEROED,
it still checks and allows the processing to continue
Also add the new VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS since it is handled
as of commit id '3c7590e0a'.
Commit id '71ce4759' altered the cgroup processing with respect to the
call to virCgroupAddTask being moved out from lower layers into the calling
layers especially for qemu processing of emulator and vcpu threads. The
movement affected lxc insomuch as it is possible for a code path to
return a NULL cgroup *and* a 0 return status via virCgroupNewPartition
failure when virCgroupNewIgnoreError succeeded when virCgroupNewMachineManual
returns. Coverity pointed out that would cause virCgroupAddTask to core.
This patch will check for a NULL cgroup as well as the negative return
and just return the NULL cgroup to the caller (as it would have previously)
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
It has been quite some time since xend required specifying cdroms
and fds in '(image (hvm ...))'. Remove the code from the parsing
and formatting functions and fixup the associated tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=830056
Add flags handling to the virStoragePoolCreate and virStoragePoolCreateXML
API's which will allow the caller to provide the capability for the storage
pool create API's to also perform a pool build during creation rather than
requiring the additional buildPool step. This will allow transient pools
to be defined, built, and started.
The new flags are:
* VIR_STORAGE_POOL_CREATE_WITH_BUILD
Perform buildPool without any flags passed.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_OVERWRITE flag.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_NO_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_NO_OVERWRITE flag.
It is up to the backend to handle the processing of build flags. The
overwrite and no-overwrite flags are mutually exclusive.
NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:
https://www.redhat.com/archives/libvir-list/2012-July/msg01328.html
We only support hotplugging SCSI controllers.
The USB and virtio-serial related code was never reachable because
this function was only called for VIR_DOMAIN_CONTROLLER_TYPE_SCSI
controllers.
This reverts commit ee0d97a and parts of commits 16db8d2
and d6d54cd1.
This function calls qemuDomainAttachControllerDevice for SCSI
controllers and reports an error for all other controllers.
Move the error inside qemuDomainAttachControllerDevice and delete this
wrapper.
Commit id '71b803ac' assumed that the storage pool source device path
was required for a 'logical' pool. This resulted in a failure to start
a pool without any device path defined.
So, adjust the virStorageBackendLogicalMatchPoolSource logic to
return success if at least the pool name matches the vgs output
when no pool source device path is/are provided.
A closer review of the code shows that for the transition from paused to
running which was supposed to emit the VIR_DOMAIN_EVENT_RESUMED - no event
would be generated. Rather the event is generated when going from running
to running.
Following the 'was_running' boolean shows it is set when the domain obj
is active and the domain obj state is VIR_DOMAIN_RUNNING. So rather than
using was_running to generate the RESUMED event, use !was_running
https://bugzilla.redhat.com/show_bug.cgi?id=1270709
When a volume wipe is successful, perform a volume refresh afterwards to
update any volume data that may be used in future volume commands, such as
volume resize. For a raw file volume, a wipe could truncate the file and
a followup volume resize the capacity may fail because the volume target
allocation isn't updated to reflect the wipe activity.
The only caller always passes 0 for the extent start.
Drop the 'extent_start' parameter, as well as the mention of extents
from the function name.
Change off_t extent_length to unsigned long long wipe_len, as well as the
'remain' variable.
Return -1:
* on all failures of fdatasync. Instead of propagating -errno
all the way up to the virStorageVolWipe API, which is documented
to return 0 or -1.
* after a partial wipe. If safewrite failed, we would re-use the
non-negative return value of lseek (which should be 0 in this case,
because that's the only offset we seek to).
When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.
When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.
We increase the limit before plugging in a PCI hostdev or a memory
module because some memory might need to be locked due to eg. VFIO.
Of course we should do the opposite after unplugging a device: this
was already the case for memory modules, but not for PCI hostdevs.
This function can be used to retrieve the current locked memory
limit for a process, so that the setting can be later restored.
Add a configure check for getrlimit(), which we now use.
The prlimit() function allows both getting and setting limits for
a process; expose the same functionality in our wrapper.
Add the const modifier for new_limit, in accordance with the
prototype for prlimit().
In commit 686eb7a24f, the break was not considered part of the
condition, hence breaking after first node when searching.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Instead of replicating the information (domain, bus, slot, function)
inside the virPCIDevice structure, use the already-existing
virPCIDeviceAddress structure.
For users of the module, this means that the object returned by
virPCIDeviceGetAddress() can no longer be NULL and must no longer
be freed by the caller.
Introduces support for domainGetJobStats which has the same
info as domainGetJobInfo but in a slightly different format.
Another difference is that virDomainGetJobStats can also
retrieve info on the most recently completed job. Though so
far this is only used in the source node to know if the
migration has been completed. But because we don't support
completed jobs we will deliver an error.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetJobInfo to get info about the
ongoing job. If the job is active it will update the
timeElapsed which is computed with the "started" field added to
struct libxlDomainJobObj. For now we support just the very basic
info and all jobs have VIR_DOMAIN_JOB_UNBOUNDED (i.e. no completion
time estimation) plus timeElapsed computed.
Openstack Kilo uses the Job API to monitor live-migration
progress which is currently nonexistent in libxl driver and
therefore leads to a crash in the nova compute node. Right
now, migration doesn't use jobs in the source node and will
return VIR_DOMAIN_JOB_NONE. Though nova handles this case and
will migrate it properly instead of crashing.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1025230
Add a new helper virStorageBackendLogicalMatchPoolSource to compare the
pool's source name against the output from a 'pvs' command to list all
volume group physical volume data on the host. In addition, compare the
pool's source device list against the particular volume group's device
list to ensure the source device(s) listed for the pool match what the
was listed for the volume group.
Then for pool startup or check API's we need to call this new API in
order to ensure that the pool we're about to start or declare active
during checkPool has a valid definition vs. the running host.
Rework virStorageBackendLogicalFindPoolSources a bit to create a
helper virStorageBackendLogicalGetPoolSources that will make the
pvs call in order to generate a list of associated pv_name and vg_name's.
A future patch will make use of this for start/check processing to
ensure the storage pool source definition matches expectations.
https://bugzilla.redhat.com/show_bug.cgi?id=1025230
When determining whether a FS pool is mounted, rather than assuming that
the FS pool is mounted just because the target.path is in the mount list,
let's make sure that the FS pool source matches what is mounted
Refactor the code that builds the pool source string during the FS
storage pool mount to be a separate helper.
A future patch will use the helper in order to validate the mounted
FS matches the pool's expectation during poolCheck processing
when appropriate, of course. If the config for a domain specifies boot
order with <boot dev='blah'/> elements, e.g.:
<os>
...
<boot dev='hd'/>
<boot dev='network'/>
</os>
Then the first disk device in the config will have ",bootindex=1"
appended to its qemu commandline -device options, and the first (and
*only* the first) network interface device will get ",bootindex=2".
However, if the first network interface device is a "hostdev" device
(an SRIOV Virtual Function (VF) being assigned to the domain with
vfio), then the bootindex option will *not* be appended. This happens
because the bootindex=n option corresponding to the order of "<boot
dev='network'/>" is added to the -device for the first network device
when network device commandline args are constructed, but if it's a
hostdev network device, its commandline arg is instead constructed in
the loop for hostdevs.
This patch fixes that omission by noticing (in bootHostdevNet) if the
first network device was a hostdev, and if so passing on the proper
bootindex to the commandline generator for hostdev devices - the
result is that ",bootindex=2" will be properly appended to the first
"network" device in the config even if it is really a hostdev
(including if it is assigned from a libvirt network pool). (note that
this is only the case if there is no <bootmenu enabled='yes'/> element
in the config ("-boot menu-on" in qemu) , since the two are mutually
exclusive - when the bootmenu is enabled, the individual per-device
bootindex options can't be used by qemu, and we revert to using "-boot
order=xyz" instead).
If a greater level of control over boot order is desired (e.g., more
than one network device should be tried, or a network device other
than the first one encountered in the config), then <boot
dev='network'/> in the <os> element should not be used; instead, the
individual device elements in the config should be given a "<boot
order='n'/>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1278421
Many of the functions follow the pattern:
virSecurity.*Security.*Label
Remove the second 'Security' from the names, it should be
obvious that the virSecurity* functions deal with security
labels even without it.
Many of the functions follow the pattern:
virSecurity.*Security.*Label
Remove the second 'Security' from the names, it should be obvious
that the virSecurity* functions deal with security labels even
without it.
Many of the functions follow the pattern:
virSecurity.*Security.*Label
Remove the second 'Security' from the names, it should be obvious
that the virSecurity* functions deal with security labels even
without it.
Commit 256496e1 introduced a detection if "is locked" in error replay
from qemu monitor. Commit c4073657 fixed a memory leak, but it was
pointed out by Peter, that this could be done cleaner without
stringifing the replay.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The return value of virJSONValueToString() should be freed when
no longer needed. This is not the case after 256496e1.
==26902== 138 bytes in 2 blocks are definitely lost in loss record 1,051 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EBB9: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2225)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
==26902== 106 bytes in 1 blocks are definitely lost in loss record 1,033 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EC0C: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2227)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Moving tasks to cgroups implied sched_setaffinity. Changing the cpus in
a set implies the same for all tasks in the group.
The old code put the the thread into the cpuset inherited from the
machine cgroup, which allowed it to run outside of vcpupin for a short
while.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
The machine cgroup is a superset, a parent to the emulator and vcpuX
cgroups. The parent cgroup should never have any tasks directly in it.
In fact the parent cpuset might contain way more cpus than the sum of
emulatorpin and vcpupins. So putting tasks in the superset will allow
them to run outside of <cputune>.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
virCgroupNewMachine used to add the pidleader to the newly created
machine cgroup. Do not do this implicit anymore.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Firstly, there's a bug (or typo) in the only place where we call
this function: @multiqueue is set whenever @tapfdSize is greater
than zero, while in fact the condition should have been 'greater
than one'.
Then, secondly, since the condition depends on just one
variable, that we are even passing down to the function, we can
move the condition into the function and drop useless argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When user configures vhost-user interface and forgets to also configure
any shared memory, the search for the root cause of non-operational
interface might take unpleasantly long time. Let's enhance user
experience by emitting a warning in the logs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266982
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some older systems, e.g. RHEL-6 do not have IFF_MULTI_QUEUE flag
which we use to enable multiqueue feature. Therefore one gets the
following compile error there:
CC util/libvirt_util_la-virnetdevmacvlan.lo
util/virnetdevmacvlan.c: In function 'virNetDevMacVLanTapSetup':
util/virnetdevmacvlan.c:338: error: 'IFF_MULTI_QUEUE' undeclared (first use in this function)
util/virnetdevmacvlan.c:338: error: (Each undeclared identifier is reported only once
util/virnetdevmacvlan.c:338: error: for each function it appears in.)
make[3]: *** [util/libvirt_util_la-virnetdevmacvlan.lo] Error 1
So, whenever user wants us to enable the feature on such systems,
we will just throw a runtime error instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt file system storage driver determines what file to
act on by concatenating the pool location with the volume name.
If a user is able to pick names like "../../../etc/passwd", then
they can escape the bounds of the pool. For that matter,
virStoragePoolListVolumes() doesn't descend into subdirectories,
so a user really shouldn't use a name with a slash.
Normally, only privileged users can coerce libvirt into creating
or opening existing files using the virStorageVol APIs; and such
users already have full privilege to create any domain XML (so it
is not an escalation of privilege). But in the case of
fine-grained ACLs, it is feasible that a user can be granted
storage_vol:create but not domain:write, and it violates
assumptions if such a user can abuse libvirt to access files
outside of the storage pool.
Therefore, prevent all use of volume names that contain "/",
whether or not such a name is actually attempting to escape the
pool.
This changes things from:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
Vol ../../../../../../etc/haha created
$ rm /etc/haha
to:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
error: Failed to create vol ../../../../../../etc/haha
error: Requested operation is not valid: volume name '../../../../../../etc/haha' cannot contain '/'
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id '56e2171c6' removed a variable from the argument list, but
neglected to update the ATTRIBUTE_NONNULL values, so when commit id
'08da97bfb' added a couple of arguments, the values were off.
Always return LLONG_MAX even on 32 bit systems. The limitation
originates from our use of "unsigned long" in several APIs. The internal
data type is unsigned long long. Make the test suite deterministic by
removing the architecture difference.
Flaw was introduced in 645881139b where
I've added a test that uses too large numbers.
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
Ta-da! Now that we know how to open a macvtap device multiple
times, we can finally enable the multiqueue feature. Everything
else is already prepared (e.g. command line generation) from the
previous iteration where the feature was implemented for
TUN/TAP devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Like we are doing for TUN/TAP devices, we should do the same for
macvtaps. Although, it's not as critical as in that case, we
should do it for the consistency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are few outdated things. Firstly, we don't need to undergo
the torture of fopen, fscanf and fclose just to get the interface
index when we have nice wrapper over that: virNetDevGetIndex.
Secondly, we don't need to have statically allocated buffer for
the path we are opening.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So yet again one of integer arguments that we use as a boolean.
Since the argument count of the function is unbearably long
enough, lets turn those booleans into flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On the very first log message we send to any output, we include
the libvirt version number and package string. In some bug reports
we have been given libvirtd.log files that came from a different
host than the corresponding /var/log/libvirt/qemu log files. So
extend the initial log message to include the hostname too.
eg on first log message we would now see:
$ libvirtd
2015-12-04 17:35:36.610+0000: 20917: info : libvirt version: 1.3.0
2015-12-04 17:35:36.610+0000: 20917: info : hostname: dhcp-1-180.lcy.redhat.com
2015-12-04 17:35:36.610+0000: 20917: error : qemuMonitorIO:687 : internal error: End of file from monitor
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1276198
Prior to commit id '98322052' failure to saferead the block device would
cause an error to be logged and the device to be skipped while attempting
to discover/create a stable target path for a new LUN (NPIV).
This was because virStorageBackendSCSIFindLUs ignored errors from
processLU and virStorageBackendSCSINewLun.
Ignoring the failure allowed a multipath device with an "active" and
"ghost" to be present on the host with the "ghost" block device being
ignored. This patch will return a -2 to the caller indicating the desire
to ignore the block device since it cannot be used directly rather than
fail the pool startup.
I found this useful while processing a volume that wouldn't end up
showing up in the resulting list of block volumes. In this case, the
partition type wasn't found in the disk_types table.
Similar to the openflags VIR_STORAGE_VOL_OPEN_NOERROR processing, if some
read processing operation fails, check the readflags for the corresponding
error flag being set. If so, rather then causing an error - use VIR_WARN
to flag the error, but return -2 which some callers can use to perform
specific actions. Use a new VIR_STORAGE_VOL_READ_NOERROR flag in a new
VolReadErrorMode enum.
While processing the volume for lseek, virFileReadHeaderFD, and
virStorageFileGetMetadataFromBuf - failure would cause an error,
but ret would not be set. That would result in an error message being
sent, but successful status being returned.
Just so it's clearer what to expect upon input and what types of return
values could be generated. These were loosely copied from existing
virStorageBackendUpdateVolTargetInfoFD.
Similar to the openflags which allow VIR_STORAGE_VOL_OPEN_NOERROR to be
passed to avoid open errors, add a 'readflags' variable so that in the
future read failures could also be ignored.
Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.
We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d821d
and 65686e5a81 this was removed.
The vCPU threads make sense in the counterparts that set the vCPU
bandwidth/quota, not in the emulator one. The emulator tunables are set
all the time anyways.
Drop the extra check and remove the now unneeded vm argument.
Since commit 0c04906fa the check for priv->cgroup doesn't make sense as
the calls to virCgroupHasController return the same information. Remove
it and move it's comment partially to the new check.
The already spurious check was also later copied to the iothreads code.
Once more stuff will be moved into the vCPU data structure it will be
necessary to get a specific one in some ocasions. Add a helper that will
simplify this task.
Refactor the code flow so that 'exit_monitor:' can be removed.
This patch moves the auditing functions into places where it's certain
that hotunplug was or was not successful and reports errors from
qemuMonitorGetCPUInfo properly.
Refactor the code flow so that 'exit_monitor:' can be removed.
This patch also moves the auditing and setting of the new vCPU count
right to the place where the hotplug happens, since it's possible that
the hotplug succeeds and adds a cpu while other stuff fails.
Lastly, failures of qemuMonitorGetCPUInfo are now reported rather than
ignored. The function retuns 0 if it "successfully" detected 0 threads.
qemuDomainHotplugVcpus/qemuDomainHotunplugVcpus are complex enough in
regards of adding one CPU. Additionally it will be desired to reuse
those functions later with specific vCPU hotplug.
Move the loops for adding vCPUs into qemuDomainSetVcpusFlags so that the
helpers can be made simpler and more straightforward.
The cpu hotplug helper functions used negative error handling in a part
of them, although some code that was added later didn't properly set the
error codes in some cases. This would cause improper error messages in
cases where we couldn't modify the numa cpu mask and a few other cases.
Fix the logic by converting it to the regularly used pattern.
With a very unfortunate timing, the agent might vanish before we do the
second call while the locks were down. Re-check that the agent is
available before attempting it again.
We should make a copy of current definition to preserve a persistent
definition, because we later update the definition with live changes.
The live definition is discarded on domain shutdown and replaced by the
copy we make before starting the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit d2e5538b16.
A migration regression was introduced by this commit. When migrating
a domain, its active XML is sent to the destination libvirtd, where
it is parsed as inactive XML. d2e5538b copied the libxl generated
interface name into the active config, which was being passed to the
migration destination and being parsed into inactive config. Attempting
to start the config could result in failure if an interface with the
same generated name already exists.
The qemu driver behaves similarly, but the parser contains a hack to
skip interface names starting with 'vnet' when parsing inactive XML.
We could extend the hack to skip names starting with 'vif' too, but a
better fix would be to expose these hypervisor-specific interface name
prefixes in capabilities. See the following discussion thread for more
details
https://www.redhat.com/archives/libvir-list/2015-December/msg00262.html
For the pending 1.3.0 release, it is best to revert d2e5538b. It can
be added again post release, after moving the prefix to capabilities.
The virtlogd RPC messages all have a flags parameter. For
sake of future error reporting we should be verifying
these are all 0 for now.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current virtlogd RPC protocol provides the ability to
handle log files associated with QEMU stdout/err. The log
protocol messages take the virt driver, domain name and
use that to form a log file path. This is quite restrictive
as it prevents us re-using the same RPC protocol messages
for logging to char device backends where the filename
can be arbitrarily user specified. It is also bad because
it means we have 2 separate locations which have to decide
on logfile name.
This change alters the RPC protocol so that we pass the
desired log file path along when opening the log file
initially. Now the virt driver is exclusively in charge
of deciding the log filename
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt driver, dom name and uuid associated with a log
file are important pieces of metadata to keep around for
sake of future enhancements to virtlogd. Currently we
discard them after opening the log file, but we should
preserve them, even across restarts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainSetMemory is documented to change only runtime configuration of
running domain. However, that's not true of all hypervisors supported.
Seems as though when commit id '0f2e50be5' added the current flag, the
function description should have been updated similar to when commit id
'c1795c52' updated the virDomainSetMaxMemory description. Especially since
commit id '80427f1d' updated the virsh 'setmem' description to indicate
"behavior is different depending on hypervisor."
This patch will update the description to match current functionality.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
When a SCSI disk is hotplugged to a domain that does not have the required
SCSI controller already defined and loaded the following internal error occurs
error: Failed to attach device from scsi_disk.xml
error: internal error: Could not find scsi controller with index 0 required for device
Commit 0260506c added in method qemuBuildDriveDevStr a lookup of the controller
alias. The internal error occurs because in method qemuDomainAttachSCSIDisk
the automatic creation of the potentially missing SCSI controller occurs after
calling qemuBuildDriveDevStr.
This patch reverses the calling sequence.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Often when debugging bug reports one is given a copy of the file
from /var/log/libvirt/qemu/$NAME.log along with other supporting
files. In a number of cases I've been given sets of files which
were from different machines. Including the hostname in the QEMU
log file will help identify when the bug reporter is providing
bad information.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log file descriptor associated with the virRotatingFile
struct should be marked close-on-exec, as even when virtlogd
re-exec's itself it expect to open the log file fresh. It
does not need to preserve the logfile handles, only the network
client FDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since libvirt for dubious historical reasons stores memory size as
kibibytes, it's possible that the alignments done in the qemu code
overflow the the maximum representable size in bytes. The XML parser
code handles them in bytes in some stages. Prevent this by doing
overflow checks when alinging the size and add a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260576
This patch reverts parts of commits 0d8b24f6b and 0785966d dealing with
the addition of a controller during virDomainHostdevAssignAddress. This
caused a regression for the hostdev hotplug path which assumes the
qemuDomainFindOrCreateSCSIDiskController will add the new controller
during qemuDomainAttachHostSCSIDevice to both the running domain and
the domain def controller list when the controller doesn't yet exist
(whether due to no SCSI controllers existing or the addition of a new
controller because existing ones are full).
Since commit id 0d8b24f6 will call virDomainHostdevAssignAddress during
virDomainDeviceDefPostParseInternal which is called either during domain
definition post processing (via an iterator during virDomainDefPostParse)
or directly from virDomainDeviceDefParse during hotplug, the change
broke the "side effect" of being able to add both a hostdev and controller
to the running domain.
The regression would only be seen if the running domain didn't have a
SCSI controller already defined or if the existing SCSI controller was
"full" of devices and a new controller needed to be created.
This patch will also add some extra comments to the code to avoid a
similar future change.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Instead of comparing garbage strings against real MAC addresses,
introduce an error mesage for unparsable ones:
$ virsh net-dhcp-leases default --mac t12
error: Failed to get leases info for default
error: invalid MAC address: t12
https://bugzilla.redhat.com/show_bug.cgi?id=1261432
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the
use of `virsh domifstat <dom> <interface name>` command plus
seeing the interfaces names instead of "-" when doing
`virsh domiflist <dom>`.
After successful guest creation we fill the network
interfaces names based on domain, device id and append suffix
if it's emulated in the following form: vif<domid>.<devid>[-emu].
We extract the network interfaces info from the libxl_domain_config
object in libxlDomainCreateIfaceNames() to generate ifname. On domain
cleanup we also clear ifname, in case it was set by libvirt (i.e.
being prefixed with "vif"). We also skip these two steps in case the name
of the interface was manually inserted by the adminstrator.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the latter
is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Commit 0f7436ca54 "network: wait for DAD to finish for bridge IPv6 addresses"
results in:
CC util/libvirt_util_la-virnetdevmacvlan.lo
util/virnetdev.c: In function 'virNetDevParseDadStatus':
util/virnetdev.c:1319:188: error: cast increases required alignment of target type [-Werror=cast-align]
util/virnetdev.c:1332:41: error: cast increases required alignment of target type [-Werror=cast-align]
util/virnetdev.c:1334:92: error: cast increases required alignment of target type [-Werror=cast-align]
cc1: all warnings being treated as errors
on at least ARM platforms.
The three macros involved (NLMSG_NEXT, IFA_RTA and RTA_NEXT) all appear to
correctly take care of alignment, therefore suppress Wcast-align around their
uses.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Maxim Perevedentsev <mperevedentsev@virtuozzo.com>
Cc: Laine Stump <laine@laine.org>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
The problem is that in some mingw header DATADIR is used but
gnulib defines it too. This leads to the following compile error:
CC locking/libvirt_driver_la-lock_manager.lo
In file included from /usr/i686-w64-mingw32/sys-root/mingw/include/objbase.h:66:0,
from /usr/i686-w64-mingw32/sys-root/mingw/include/ole2.h:17,
from /usr/i686-w64-mingw32/sys-root/mingw/include/wtypes.h:12,
from /usr/i686-w64-mingw32/sys-root/mingw/include/winscard.h:10,
from /usr/i686-w64-mingw32/sys-root/mingw/include/windows.h:97,
from /usr/i686-w64-mingw32/sys-root/mingw/include/winsock2.h:23,
from ../gnulib/lib/unistd.h:48,
from ../../src/util/virutil.h:29,
from ../../src/logging/log_manager.c:30:
/usr/i686-w64-mingw32/sys-root/mingw/include/objidl.h:12275:2: error: expected identifier or '(' before string constant
} DATADIR;
^
Makefile:7888: recipe for target 'logging/libvirt_driver_la-log_manager.lo' failed
The fix is to include configmake.h at the end of includes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 48cd3dfa66 introduced configuration
file for libvirt-admin but forgot to distribute it. Also the change
made to libvirt.conf in commit dbecb87f94
should've been removed thanks to introduction of separate config file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense. Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.
This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).
Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients. And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If VM A is shutdown a by qemu agent at appoximately the same time
an agent EOF of VM A happened, there's a chance that deadlock may occur:
qemuProcessHandleAgentEOF in main thread
A) priv->agent = NULL; //A happened before B
//deadlock when we get agent lock which's held by worker thread
qemuAgentClose(agent);
qemuDomainObjExitAgent called by qemuDomainShutdownFlags in worker thread
B) hasRefs = virObjectUnref(priv->agent); // priv->agent is NULL,
// return false
if (hasRefs)
virObjectUnlock(priv->agent); //agent lock will not be released here
In order to resolve, during EOF close the agent first, then set priv->agent
to NULL to fix the deadlock.
This essentially reverts commit id '1020a504'. It's also of note that commit
id '362d0477' notes a possible/rare deadlock similar to what was seen in
the monitor in commit id '25f582e3'. However, it seems interceding changes
including commit id 'd960d06f' should remove the deadlock issue.
With this change, if EOF is called:
Get VM lock
Check if !priv->agent || priv->beingDestroyed, then unlock VM
Call qemuAgentClose
Unlock VM
When qemuAgentClose is called
Get Agent lock
If Agent->fd open, close it
Unlock Agent
Unref Agent
qemuDomainObjEnterAgent
Enter with VM lock
Get Agent lock
Increase Agent refcnt
Unlock VM
After running agent command, calling qemuDomainObjExitAgent
Enter with Agent lock
Unref Agent
If not last reference, unlock Agent
Get VM lock
If we were in the middle of an EnterAgent, call Agent command, and
ExitAgent sequence and the EOF code is triggered, then the EOF code
can get the VM lock, make it's checks against !priv->agent ||
priv->beingDestroyed, and call qemuAgentClose. The CloseAgent
would wait to get agent lock. The other thread then will eventually
call ExitAgent, release the Agent lock and unref the Agent. Once
ExitAgent releases the Agent lock, AgentClose will get the Agent
Agent lock, close the fd, unlock the agent, and unref the agent.
The final unref would cause deletion of the agent.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Reviewed-by: Ren Guannan <renguannan@huawei.com>
The parameter --disable-dependency-tracking is supposed to speed up
one-time build due to the fact that it disables some dependency
extractors that, apparently, take longer time to execute. That is a
problem for code that is generated into builddir (especially some
specific subdirectory) because the directory it should be installed to
does not exists in VPATH and without the dependency tracking is not
created. Generating such file hence fails with -ENOENT. In order to
keep generating files into builddir instead of srcdir, we must create
the directory ourselves. This should finally fix the problem that is
being fixed multiple times since its introduction in commit a9fe620372
and let us continue with cleaning those parts of Makefiles that depend
on generating files into the srcdir rather than builddir as it should
be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To be used by the family of virtio input devices:
<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
Add capabilities for virtio-keyboard, virtio-mouse
and virtio-tablet devices:
name "virtio-keyboard-device", bus virtio-bus
name "virtio-keyboard-pci", bus PCI
name "virtio-mouse-device", bus virtio-bus
name "virtio-mouse-pci", bus PCI
name "virtio-tablet-device", bus virtio-bus
name "virtio-tablet-pci", bus PCI
Map both -device and -pci versions of the device to one capability.
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
If for some reason there is an existing log file, that is larger then
max length of log file, we need to rollover that file immediately.
Trying to figure out how much data we could write will resolve in
overflow of unsigned variable 'towrite' and this leads to segfault.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
As we need a client disconnect handler, we also need a mechanism to register
such handlers for a client. This patch introduced both the close callbacks and
also the client vshAdmCatchDisconnect handler to be registered with it. By
registering the handler we still need to make sure the client can react to
daemon's events like disconnect or keepalive, so asynchronous I/O event polling
is necessary to be enabled too.
Now that we introduced URI support in libvirt-admin, we should also support URI
aliases during connection establishment phase. After applying this patch,
virAdmConnectOpen will also support VIR_CONNECT_NO_ALIASES flag.
As we need to provide support for URI aliases in libvirt-admin as well, URI
alias matching needs to be internally visible. Since
virConnectOpenResolveURIAlias does have a compatible signature, it could be
easily reused by libvirt-admin. This patch moves URI alias matching to util,
renaming it accordingly.
As we plan to add more and more logic to remote connecting methods,
these cannot be generated from admin_protocol.x anymore. Instead,
this patch implements these to methods explicitly.
By moving the remote version into a separate module, we gain a slightly
better maintainability in the long run than just by leaving it in one
place with the existing libvirt-admin library which can start getting
pretty messy later on.
Since most of our APIs rely on an acive functional connection to a daemon and
we have such a mechanism in libvirt already, there's need to have such a way in
libvirt-admin as well. By introducing a new public API, this patch provides
support to check for an active connection.
Unfortunately, client side version retrieval API virGetVersion uses
one-time initialization (due to the fact we might not have initialized the
library by calling connect prior to this) which is not completely compatible
with admin initialization. This API is rather simplistic and reimplementing
it for admin might be the preferred method of reusing it. Note that even though
the method will be reimplemented, the version number is still the same for both
the libvirt and libvirt-admin library.
virConnectGetConfig and virConnectGetConfigPath were static libvirt
methods, merely because there hasn't been any need for having them
internally exported yet. Since libvirt-admin also needs to reference
its config file, 'xGetConfig' should be exported.
Besides moving, this patch also renames the methods accordingly,
as they are libvirt config specific.
Check if virtio-gpu provides virgl option, and add qemu command line
formatter.
It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
<acceleration accel3d='yes'/>
</model>
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 2.5 provides virtio video device. It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allowing to have the extra undefined/default state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Machine name escaping follows the same rules as serice name escape,
except that '.' and '-' must not be escaped in machine names, due
to a bug in systemd-machined.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The libvirt_logd.aug and test_libvirt_logd.aug.in files
have never existed so shouldn't be in EXTRA_DIST. It was
a copy+paste mistake when closing virtlogd from virtlockd
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With some versions of GLibC / GCC, a variable called 'daemon'
will result in a warning about clashing with the function also
named 'daemon'. Rename it to 'dmn' to avoid the clash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Otherwise we fail on 32bit with:
CC logging/virtlogd-log_daemon_dispatch.o
logging/log_daemon_dispatch.c: In function 'virLogManagerProtocolDispatchDomainReadLogFile':
logging/log_daemon_dispatch.c:120:9: error: format '%zu' expects argument of type 'size_t', but argument 7 has type 'uint64_t' [-Werror=format]
The virtlogd daemon is launched with a 30 second timeout for
unprivileged users. Unfortunately the timeout is only inhibited
while RPC clients are connected, and they only connect for a
short while to open the log file descriptor. We need to hold
an inhibition for as long as the log file descriptor itself
is open.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
