==5306== 8 bytes in 1 blocks are definitely lost in loss record 24 of 277
==5306== at 0x4C28B2F: calloc (vg_replace_malloc.c:593)
==5306== by 0x5293CAF: virAllocN (viralloc.c:152)
==5306== by 0x52DFEAE: virXPathNodeSet (virxml.c:611)
==5306== by 0x5313DD9: virNetworkDefParseXML (network_conf.c:1408)
==5306== by 0x53170F6: virNetworkObjUpdateParseFile (network_conf.c:2031)
==5306== by 0x131DA63C: networkStartup (bridge_driver.c:279)
==5306== by 0x53481DF: virStateInitialize (libvirt.c:822)
==5306== by 0x40DF44: daemonRunStateInit (libvirtd.c:877)
==5306== by 0x52D2FF5: virThreadHelper (virthreadpthread.c:161)
==5306== by 0x5D00C52: start_thread (in /usr/lib64/libpthread-2.17.so)
==5306== by 0x6410ECC: clone (in /usr/lib64/libc-2.17.so)
When libvirtd loads active network configs from network state directory,
it should release the class_id memory block which was allocated
at the time of loading xml from network config directory.
virBitmapParse will create a new memory block of bitmap class_id which
causes a memory leak.
This happens when at least one virtual network is active before.
==12234== 8,216 (24 direct, 8,192 indirect) bytes in 1 blocks are definitely \
lost in loss record 702 of 709
==12234== at 0x4A06B2F: calloc (vg_replace_malloc.c:593)
==12234== by 0x37AB04D77D: virAlloc (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB04EF89: virBitmapNew (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFB37: virNetworkAssignDef (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFD31: ??? (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFE92: virNetworkLoadAllConfigs (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x10650E5A: ??? (in /usr/lib64/libvirt/connection-driver/libvirt_driver_network.so)
==12234== by 0x37AB0EB72F: virStateInitialize (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x40DE04: ??? (in /usr/sbin/libvirtd)
==12234== by 0x37AB0832E8: ??? (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x3796807D14: start_thread (in /usr/lib64/libpthread-2.16.so)
==12234== by 0x37960F246C: clone (in /usr/lib64/libc-2.16.so)
This reverts commit 383ebc4694.
We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address. Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used. According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.
Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.
Documentation and schemas have been updated.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.
Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
We pass over the address/port start/end values many times so we put
them in structs.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Let users set the port range to be used for forward mode NAT:
...
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
...
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Support setting which public ip to use for NAT via attribute
address in subelement <nat> in <forward>:
...
<forward mode='nat'>
<address start='1.2.3.4' end='1.2.3.10'/>
</forward>
...
This will construct an iptables line using:
'-j SNAT --to-source <start>-<end>'
instead of:
'-j MASQUERADE'
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
gcc 4.1.2 on RHEL 5 warned:
conf/network_conf.c:3136: warning: 'foundIdx' may be used uninitialized in this function
The warning is spurious, but initializing the variable doesn't hurt.
* src/conf/network_conf.c (virNetworkDefUpdateDNSHost): Silence
unused variable warning.
gcc -O2 complained:
../../src/conf/network_conf.c: In function 'virNetworkDefUpdateDNSSrv':
../../src/conf/network_conf.c:3232: error: 'foundIdx' may be used uninitialized in this function [-Wuninitialized]
It turned out to be a spurious warning (we didn't use foundIdx
unless foundCt was non-zero). But in investigating that, I noticed
a worse problem: we were using 'if (foundCt > 1)', but since foundCt
was bool, it could never be > 1.
* src/conf/network_conf.c (virNetworkDefUpdateDNSHost): Use
correct type.
(virNetworkDefUpdateDNSSrv): Likewise, and silence compiler
warning.
Currently, we are only keeping a inactive XML configuration
in status dir. This is no longer enough as we need to keep
this class_id attribute so we don't overwrite old entries
when the daemon restarts. However, since there has already
been release which has just <network/> as root element,
and we want to keep things compatible, detect that loaded
status file is older one, and don't scream about it.
Network should be notified if we plug in or unplug an
interface, so it can perform some action, e.g. set/unset
network part of QoS. However, we are doing this in very
early stage, so iface->ifname isn't filled in yet. So
whenever we want to report an error, we must use a different
identifier, e.g. the MAC address.
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.
From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface. This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.
Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.
With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)
Documentation and the network schema has been updated
to reflect the new support.
virNetworkDefUpdateForward requires separate functions to parse and
clear a virNetworkForwardDef by itself, but they were previously just
inlined in the virNetworkDef parse and free functions. This patch
makes them into separate functions.
The attributes of a <network> element's <forward> element were
previously stored directly in the virNetworkDef object, but
virNetworkUpdateForward() needs to operate on a <forward> in
isolation, so this patchs pulls out all those attributes into a
separate virNetworkForwardDef struct (and shortens their names
appropriately). This new object is contained in the virNetworkDef, not
pointed to by it, so there is no extra memory management.
This patch makes no functional changes, it only changes, e.g.,
"nForwardIfs" to "forward.nifs".
The other clear functions in network_conf.c that clear out arrays of
sub-objects do so by using the n[itemname]s value as a counter going
down to 0. Make this one consistent. There's no functional value, just
makes the style more consistent with the rest of the file.
This makes some function names and arg lists for consistent with other
parse functions in network_conf.c. While modifying
virNetworkIPParseXML(), also change its "error" label to "cleanup",
since the code at that label is executed on success as well as
failure.
These three functions are very similar - none allow a MODIFY
operation; you can only add or delete.
The biggest difference between them (other than the data itself) is in
the criteria for determining a match, and whether or not multiple
matches are possible:
1) for HOST records, it's considered a match if the IP address or any
of the hostnames of an existing record matches.
2) for SRV records, it's a match if all of
domain+service+protocol+target *which have been specified* are
matched.
3) for TXT records, there is only a single field to match - name
(value can be the same for multiple records, and isn't considered a
search term), so by definition there can be no ambiguous matches.
In all three cases, if any matches are found, ADD will fail; if
multiple matches are found, it means the search term was ambiguous,
and a DELETE will fail.
The upper level code in bridge_driver.c is already implemented for
these functions - appropriate conf files will be re-written, and
dnsmasq will be SIGHUPed or restarted as appropriate.
Since there is only a single virNetworkDNSDef for any virNetworkDef,
and it's trivial to determine whether or not it contains any real
data, it's much simpler (and fits more uniformly with the parse
function calling sequence of the parsers for many other objects that
are subordinates of virNetworkDef) if virNetworkDef *contains* an
virNetworkDNSDef rather than pointing to one.
Since it is now just a part of another object rather than its own
object, it no longer makes sense to have a *Free() function, so that
is changed to a *Clear() function.
More importantly though, ParseXML and Clear functions are needed for
the individual items contained in a virNetworkDNSDef (srv, txt, and
host records), but none of them have a *Clear(), and only two of the
three had *ParseXML() functions (both of which used a non-uniform
arglist). Those problems are cleared up by this patch - it splits the
higher-level Clear function into separate functions for each of the
three, creates a parse for txt records, and cleans up the srv and host
parsers, so we now have all the utility functions necessary to
implement virNetworkDefUpdateDNS(Host|Srv|Txt).
This shortens the name of the structs for srv and txt, and their
instances in virNetworkDNSDef, to be more compact and uniform with the
naming of the dns host array. It also changes the type of ntxts, etc
from unsigned int to size_t, so that they can be used directly as args
to VIR_*_ELEMENT.
The already-written backend functions for virNetworkUpdate that add
and delete items into lists within the a network were already debugged
to work properly, but future such functions will use
VIR_(INSERT|DELETE)_ELEMENT instead, so these are changed for
uniformity.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=767057
It was possible to define a network with <forward mode='bridge'> that
had both a bridge device and a forward device defined. These two are
mutually exclusive by definition (if you are using a bridge device,
then this is a host bridge, and if you have a forward dev defined,
this is using macvtap). It was also possible to put <ip>, <dns>, and
<domain> elements in this definition, although those aren't supported
by the current driver (although it's conceivable that some other
driver might support that).
The items that are invalid by definition, are now checked in the XML
parser (since they will definitely *always* be wrong), and the others
are checked in networkValidate() in the network driver (since, as
mentioned, it's possible that some other network driver, or even this
one, could some day support setting those).
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified. This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).
This patch adds a new attribute "ipv6" at the toplevel of a <network>
object. If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.
Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:
net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1
This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.
To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.
Documentation related to this patch has been updated.
The network schema has also been updated.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=879473
The name attribute is required for portgroup elements (yes, the RNG
specifies that), and there is code in libvirt that assumes it is
non-null. Unfortunately, the portgroup parsing function wasn't
checking for lack of portgroup. One adverse result of this was that
attempts to update a network by adding a portgroup with no name would
cause libvirtd to segfault. For example:
virsh net-update default add portgroup "<portgroup default='yes'/>"
This patch causes virNetworkPortGroupParseXML to fail if no name is
specified, thus avoiding any later problems.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the XML warning, we print a virsh command line that can be used to
edit that XML. This patch prints UUIDs if the entity name contains
special characters (like shell metacharacters, or "--" that would break
parsing of the XML comment). If the entity doesn't have a UUID, just
print the virsh command that can be used to edit it.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868483
virNetworkUpdate, virNetworkDefine, and virNetworkCreate all three
allow network definitions to contain multiple <portgroup> elements
with default='yes'. Only a single default portgroup should be allowed
for each network.
This patch updates networkValidate() (called by both
virNetworkCreate() and virNetworkDefine()) and
virNetworkDefUpdatePortGroup (called by virNetworkUpdate() to not
allow multiple default portgroups.
https://bugzilla.redhat.com/show_bug.cgi?id=866364
pointed out a crash due to virNetworkObjAssignDef free'ing
network->newDef without NULLing it afterward. A fix for this is in
upstream commit b7e9202401. While the
NULLing of newDef was a legitimate fix, newDef should have already
been empty (NULL) anyway (as indicated in the comment that was deleted
by that commit).
The reason that newDef had a non-NULL value (i.e. the root cause) was
that networkStartNetwork() had failed after populating
network->newDef, but then neglected to free/NULL newDef in the
cleanup.
(A bit of background here: network->newDef should contain the
persistent config of a network when a network is active (and of course
only when it is persisten), and NULL at all other times. There is also
a network->def which should contain the persistent definition of the
network when it is inactive, and the current live state at all other
times. The idea is that you can make changes to network->newDef which
will take effect the next time the network is restarted, but won't
mess with the current state of the network (virDomainObj has a similar
pair of virDomainDefs that behave in the same fashion). Personally I
think there should be a network->live and network->config, and the
location of the persistent config should *always* be in
network->config, but that's for a later cleanup).
Since I love things to be symmetric, I created a new function called
virNetworkObjUnsetDefTransient(), which reverses the effects of
virNetworkObjSetDefTransient(). I don't really like the name of the
new function, but then I also didn't really like the name of the old
one either (it's just named that way to match a similar function in
the domain conf code).
which frees all allocated memory but doesn't set the passed pointer to
NULL. Therefore, we must do it ourselves. This is causing actual
libvirtd crash: Basically, when doing 'virsh net-edit' the newDef should
be dropped. And the memory is freed, indeed. However, the pointer is
not set to NULL but kept instead. And the next duo of calls 'virsh
net-start' and 'virsh net-destroy' starts the disaster. The latter one
does the same as 'virsh destroy'; it sees that newDef is nonNULL so it
replaces def with newDef (which has been freed already as said a few
lines above). Therefore any subsequent call accessing def will hit the ground.
<interface> elements are location inside the <forward> element of a
network. There is only one <forward> element in any network, but it
might have many <interface> elements. This element only contains a
single attribute, "dev", which is the name of a network device
(e.g. "eth0").
Since there is only a single attribute, the modify operation isn't
supported for this "section", only add-first, add-last, and
delete. Also, note that it's not permitted to delete an interface from
the list while any guest is using it. We may later decide this is safe
(because removing it from the list really only excludes it from
consideration in future guest allocations of interfaces, but doesn't
affect any guests currently connected), but for now this limitation
seems prudent (of course when changing the persistent config, this
limitation doesn't apply, because the persistent config doesn't
support the concept of "in used").
Another limitation - it is also possible for the interfraces in this
list to be described by PCI address rather than netdev name. However,
I noticed while writing this function that we currently don't support
defining interfaces that way in config - the only method of getting
interfaces specified as <adress type='pci' ..../> instead of
<interface dev='xx'/> is to provide a <pf dev='yy'/> element under
forward, and let the entries in the interface list be automatically
populated with the virtual functions (VF) of the physical function
device given in <pg>.
As with the other virNetworkUpdate section backends, support for this
section is completely contained within a single static function, no
other changes were required, and only functions already called from
elsewhere within the same file are used in the new content for this
existing function (i.e., adding this code should not cause a new build
problem on any platform).
Every level of the code for virNetworkUpdate was assuming that some
other level was checking for validity of the "command" arg, but none
actually were. The result was that an invalid command code would do
nothing, but also report success.
Since the command code isn't used until the very lowest level backend
functions, that's where I put the check. I made a separate one-line
function to log the error. The compiler would have combined the
identical strings used by multiple calls if I'd just called
virReportError directly in each location, but sending them all to the
same string in the source guards against inadvertant divergence (which
would lead to extra work for translators.)
1) virNetworkObjUpdate should be an all or none operation, but in the
case that we want to update both the live state and persistent config
versions of the network, it was committing the update to the live
state before starting to update the persistent config. If update of
the persistent config failed, we would leave with things in an
inconsistent state - the live state would be updated (even though an
error was returned), but persistent config unchanged.
This patch changed virNetworkObjUpdate to use a separate pointer for
each copy of the virNetworkDef, and not commit either of them in the
virNetworkObj until both live and config parts of the update have
successfully completed.
2) The parsers for various pieces of the virNetworkDef have all sorts
of subtle limitations on them that may not be known by the
Update[section] function, making it possible for one of these
functions to make a modification directly to the object that may not
pass the scrutiny of a subsequent parse. But normally another parse
wouldn't be done on the data until the *next* time the object was
updated (which could leave the network definition in an unusable
state).
Rather than fighting the losing battle of trying to duplicate all the
checks from the parsers into the update functions as well, the more
foolproof solution to this is to simply do an extra
virNetworkDefCopy() operation on the updated networkdef -
virNetworkDefCopy() does a virNetworkFormat() followed by a
virNetworkParseString(), so it will do all the checks we need. If this
fails, then we don't commit the changed def.
portgroup elements are located in the toplevel of <network>
objects. There can be multiple <portgroup> elements, and they each
have a unique name attribute.
Add, delete, and modify are all supported for portgroup. When deleting
a portgroup, only the name must be specified in the provided xml - all
other attributes and subelements are ignored for the purposes of
matching and existing portgroup.
The bridge driver and virsh already know about the portgroup element,
so providing this backend should cause the entire stack to work. Note
that in the case of portgroup, there is no external daemon based on
the portgroup config, so nothing must be restarted.
It is important to note that guests make a copy of the appropriate
network's portgroup data when they are started, so although an updated
portgroup's configuration will have an affect on new guests started
after the cahange, existing guests won't magically have their
bandwidth changed, for example. If something like that is desired, it
will take a lot of redesign work in the way network devices are setup
(there is currently no link from the network back to the individual
interfaces using it, much less from a portgroup within a network back
to the individual interfaces).
The dhcp range element is contained in the <dhcp> element of one of a
network's <ip> elements. There can be multiple <range>
elements. Because there are only two attributes (start and end), and
those are exactly what you would use to identify a particular range,
it doesn't really make sense to modify an existing element, so
VIR_NETWORK_UPDATE_COMMAND_MODIFY isn't supported for this section,
only ADD_FIRST, ADD_LAST, and DELETE.
Since virsh already has support for understanding all the defined
sections, this new backend is automatically supported by virsh. You
would use it like this:
virsh net-update mynet add ip-dhcp-range \
"<range start='1.2.3.4' end='1.2.3.20'/>" --live --config
The bridge driver also already supports all sections, so it's doing
the correct thing in this case as well - since the dhcp range is
placed on the dnsmasq commandline, the bridge driver recreates the
dnsmasq commandline, and re-runs dnsmasq whenever a range is
added/deleted (and AFFECT_LIVE is specified in the flags).
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The memmove to move elements in the dhcp hosts array when inserting
and deleting items was mistakenly basing the length of the copy on the
size of a virNetworkDHCPHostDefPtr rather than virNetworkDHCPHostDef,
with the expected disastrous results.
The memmove to delete an entry commits two errors - along with the
size of each element being wrong, it also omits some required
parentheses.
This patch fills in the first implementation for one of the
virNetworkUpdate sections. With this code, you can now add/delete/edit
<host> entries in a network's <ip> address <dhcp> element (by
specifying a section of VIR_NETWORK_SECTION_IP_DHCP_HOST).
If you pass in a parentIndex of -1, the code will automatically find
the one ip element that has a <dhcp> section and make the updates
there. Otherwise, you can specify an index >= 0, and libvirt will look
for that particular instance of <ip> in the network, and modify its
<dhcp> element. (This currently isn't very useful, because libvirt
only supports having dhcp information on a single IP address, but that
could change in the future).
When adding a new host entry
(VIR_NETWORK_UPDATE_COMMAND_ADD_(FIRST|LAST)), the existing entries
will be compared to the new entry, and if any non-empty attribute
matches, the add will fail. When updating an existing entry
(VIR_NETWORK_UPDATE_COMMAND_MODIFY), the mac address or name will be
used to find the existing entry, and other fields will only be updated
(note there is some potential for ambiguity here if you specify the
mac address from one entry and the name from another). When deleting
an existing entry (VIR_NETWORK_UPDATE_COMMAND_DELETE), all non-empty
attributes in the supplied xml arg will be compared - all of them must
match before libvirt will delete the host.
The xml should be a fully formed <host> element as it would appear in
a network definition, e.g. "<host mac=00:11:22:33:44:55 ip=10.1.23.22
name='testbox'/>" (when adding/updating, ip and one of mac|name is
required; when deleting, you can specify any one, two, or all
attributes, but they all must match the target element).
As with the update of any other section, you can choose to affect the
live config (with flag VIR_NETWORK_UPDATE_AFFECT_LIVE), the persistent
config (VIR_NETWORK_UPDATE_AFFECT_CONFIG), or both. If you've chosen
to affect the live config, those changes will take effect immediately,
with no need to destroy/restart the network.
An example of adding a host entry:
virNetworkUpdate(net, VIR_NETWORK_UPDATE_COMMAND_ADD_LAST,
VIR_NETWORK_SECTION_IP_DHCP_HOST, -1,
"<host mac='00:11:22:33:44:55' ip='192.168.122.5'/>",
VIR_NETWORK_UPDATE_AFFECT_LIVE
| VIR_NETWORK_UPDATE_AFFECT_CONFIG);
To delete that same entry:
virNetworkUpdate(net, VIR_NETWORK_UPDATE_COMMAND_DELETE,
VIR_NETWORK_SECTION_IP_DHCP_HOST, -1,
"<host mac='00:11:22:33:44:55'/>",
VIR_NETWORK_UPDATE_AFFECT_LIVE
| VIR_NETWORK_UPDATE_AFFECT_CONFIG);
(you could also delete it by replacing "mac='00:11:22:33:44:55'" with
"ip='192.168.122.5'".)
virNetworkObjUpdate takes care of all virNetworkUpdate-related changes
to the data stored in the in-memory virNetworkObj list. It should be
called by network drivers that use this in-memory list.
virNetworkObjUpdate *does not* take care of updating any disk-based
copies of the config, nor does it perform any other operations
necessary to have the new config data take effect (e.g. it won't
re-write dnsmasq host files, nor will it send a SIGHUP to dnsmasq) -
those things should all be taken care of in the network driver
function that calls virNetworkObjUpdate (assuming that it returns
success).
These new functions are highly inspired by those in domain_conf.c (but
not identical), and are intended to make it simpler to update the
various combinations of live/persistent network configs.
The network driver wasn't previously as careful about the separation
between the live "status" in network->def and the persistent "config"
in network->newDef (or sometimes in network->def). This series
attempts to remedy some of that, but probably doesn't go all the way
(enough to get these functions working and enable continued work on
virNetworkUpdate though).
bridge_driver.c and test_driver.c were updated in a few places to take
advantage of the new functions and/or account for changes in argument
lists.
virNetworkAssignDef was allocating a new network object, initing and
grabbing its lock, then potentially freeing it without unlocking or
destroying the lock. In practice 1) this will probably never happen,
and 2) even if it did, the lock implementation used on most (all?)
platforms doesn't actually hold any resources for an initialized or
held lock, but it still bothered me, so I moved the realloc that could
lead to this bad situation earlier in the function, and now the mutex
isn't inited or locked until we are assured of complete success.
These two objects were previously always parsed as a part of an IpDef,
but we will now need to be able to parse them on their own for
virNetworkUpdate(). Split the parsing functions out, with no
functional changes.
src/conf/network_conf.c: Add virNetworkMatch to filter the networks;
and virNetworkList to iterate over all the networks with the filter.
src/conf/network_conf.h: Declare virNetworkList and define the macros
for filters.
src/libvirt_private.syms: Export virNetworkList.
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
Just as each physical device used by a network has a connections
counter, now each network has a connections counter which is
incremented once for each guest interface that connects using this
network.
The count is output in the live network XML, like this:
<network connections='20'>
...
</network>
It is read-only, and for informational purposes only - it isn't used
internally anywhere by libvirt.
It may be useful for management applications to know which physical
network devices are in use by guests. This information is already
available in the network objects, but wasn't output in the XML. This
patch outputs it when the INACTIVE flag isn't set (and if it's non-0).
I want to include this count in the xml output of networks, but
calling it "connections" in the XML sounds better than "usageCount", and it
would be better if the name in the XML matched the variable name.
In a few places, usageCount was being initialized to 0, but this is
unnecessary, because VIR_ALLOC_N zero-fills everything anyway.
This array was originally defined using the existing
virNetworkForwardIfDef, but that struct has a UsageCount field that
isn't used in the case of PFs. This patch just copies that struct and
removes UsageCount. It ends up being a struct with a single field, but
I left it as a struct in case we need to add other fields to it in the
future.
Until now, all attributes in a <virtualport> parameter list that were
acceptable for a particular type, were also required. There were no
optional attributes.
One of the aims of supporting <virtualport> in libvirt's virtual
networks and portgroups is to allow specifying the group-wide
parameters in the network's virtualport, and merge that with the
interface's virtualport, which will have the instance-specific info
(i.e. the interfaceid or instanceid).
Additionally, the guest's interface XML shouldn't need to know what
type of network connection will be used prior to runtime - it could be
openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should
still be able to specify instance-specific info just in case it turns
out to be applicable.
Finally, up to now, the parser for virtualport has always generated a
random instanceid/interfaceid when appropriate, making it impossible
to leave it blank (which is what's required for virtualports within a
network/portprofile definition).
This patch modifies the parser and formatter of the <virtualport>
element in the following ways:
* because most of the attributes in a virNetDevVPortProfile are fixed
size binary data with no reserved values, there is no way to embed a
"this value wasn't specified" sentinel into the existing data. To
solve this problem, the new *_specified fields in the
virNetDevVPortProfile object that were added in a previous patch of
this series are now set when the corresponding attribute is present
during the parse.
* allow parsing/formatting a <virtualport> that has no type set. In
this case, all fields are settable, but all are also optional.
* add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is
set and an instanceid/interfaceid is expected but not provided, a
random one will be generated. This was previously the default
behavior, but is now done only for virtualports inside an
<interface> definition, not for those in <network> or <portgroup>.
* add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is
set the parser will call the new
virNetDevVPortProfileCheckComplete() functions at the end of the
parser to check for any missing attributes (based on type), and
return failure if anything is missing. This used to be default
behavior. Now it is only used for the virtualport defined inside an
interface's <actual> element (by the time you've figured out the
contents of <actual>, you should have all the necessary data to fill
in the entire virtualport)
* add a REQUIRE_TYPE flag to the parser - if this flag is set, the
parser will return an error if the virtualport has no type
attribute. This also was previously the default behavior, but isn't
needed in the case of the virtualport for a type='network' interface
(i.e. the exact type isn't yet known), or the virtualport of a
portgroup (i.e. the portgroup just has modifiers for the network's
virtualport, which *does* require a type) - in those cases, the
check will be done at domain startup, once the final virtualport is
assembled (this is handled in the next patch).
An ESX server has one or more PhysicalNics that represent the actual
hardware NICs. Those can be listed via the interface driver.
A libvirt virtual network is mapped to a HostVirtualSwitch. On the
physical side a HostVirtualSwitch can be connected to PhysicalNics.
On the virtual side a HostVirtualSwitch has HostPortGroups that are
mapped to libvirt virtual network's portgroups. Typically there is
HostPortGroups named 'VM Network' that is used to connect virtual
machines to a HostVirtualSwitch. A second HostPortGroup typically
named 'Management Network' is used to connect the hypervisor itself
to the HostVirtualSwitch. This one is not mapped to a libvirt virtual
network's portgroup. There can be more HostPortGroups than those
typical two on a HostVirtualSwitch.
+---------------+-------------------+
...---| | | +-------------+
| HostPortGroup | |---| PhysicalNic |
| VM Network | | | vmnic0 |
...---| | | +-------------+
+---------------+ HostVirtualSwitch |
| vSwitch0 |
+---------------+ |
| HostPortGroup | |
...---| Management | |
| Network | |
+---------------+-------------------+
The virtual counterparts of the PhysicalNic is the HostVirtualNic for
the hypervisor and the VirtualEthernetCard for the virtual machines
that are grouped into HostPortGroups.
+---------------------+ +---------------+---...
| VirtualEthernetCard |---| |
+---------------------+ | HostPortGroup |
+---------------------+ | VM Network |
| VirtualEthernetCard |---| |
+---------------------+ +---------------+
|
+---------------+
+---------------------+ | HostPortGroup |
| HostVirtualNic |---| Management |
+---------------------+ | Network |
+---------------+---...
The currently implemented network driver can list, define and undefine
HostVirtualSwitches including HostPortGroups for virtual machines.
Existing HostVirtualSwitches cannot be edited yet. This will be added
in a followup patch.
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
If the user specified invalid protocol type in a network's SRV record
the error path ended up in freeing uninitialized pointers causing a
daemon crash.
*network_conf.c: virNetworkDNSSrvDefParseXML(): initialize local
variables
More bug extermination in the category of:
Error: CHECKED_RETURN:
/libvirt/src/conf/network_conf.c:595:
check_return: Calling function "virAsprintf" without checking return value (as is done elsewhere 515 out of 543 times).
/libvirt/src/qemu/qemu_process.c:2780:
unchecked_value: No check of the return value of "virAsprintf(&msg, "was paused (%s)", virDomainPausedReasonTypeToString(reason))".
/libvirt/tests/commandtest.c:809:
check_return: Calling function "setsid" without checking return value (as is done elsewhere 4 out of 5 times).
/libvirt/tests/commandtest.c:830:
unchecked_value: No check of the return value of "virTestGetDebug()".
/libvirt/tests/commandtest.c:831:
check_return: Calling function "virTestGetVerbose" without checking return value (as is done elsewhere 41 out of 42 times).
/libvirt/tests/commandtest.c:833:
check_return: Calling function "virInitialize" without checking return value (as is done elsewhere 18 out of 21 times).
One note about the error in commandtest line 809: setsid() seems to fail when running the test -- could be removed ?
A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:
1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.
There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).
The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.
If an error was encountered parsing a dhcp host entry mac address or
name, parsing would continue and log a less descriptive error that
might make it more difficult to notice the true nature of the problem.
This patch returns immediately on logging the first error.
virNetworkDNSHostsDefParseXML was calling VIR_ALLOC(def->hosts) if
def->hosts was NULL. This is a waste of time, though, since
VIR_REALLOC_N is called a few lines further down, prior to any use of
def->hosts. (initializing def->nhosts to 0 is also redundant, because
the newly allocated memory will always be cleared to all 0's anyway).
Our HACKING discourages use of malloc and free, for at least
a couple of years now. But we weren't enforcing it, until now :)
For now, I've exempted python and tests, and will clean those up
in subsequent patches. Examples should be permanently exempt,
since anyone copying our examples won't have use of our
internal-only memory.h via libvirt_util.la.
* cfg.mk (sc_prohibit_raw_allocation): New rule.
(exclude_file_name_regexp--sc_prohibit_raw_allocation): and
exemptions.
* src/cpu/cpu.c (cpuDataFree): Avoid false positive.
* src/conf/network_conf.c (virNetworkDNSSrvDefParseXML): Fix
offenders.
* src/libxl/libxl_conf.c (libxlMakeDomBuildInfo, libxlMakeVfb)
(libxlMakeDeviceModelInfo): Likewise.
* src/rpc/virnetmessage.c (virNetMessageSaveError): Likewise.
* tools/virsh.c (_vshMalloc, _vshCalloc): Likewise.
Hi,
this is the fifth version of my SRV record for DNSMasq patch rebased
for the current codebase to the bridge driver and libvirt XML file to
include support for the SRV records in the DNS. The syntax is based on
DNSMasq man page and tests for both xml2xml and xml2argv were added as
well. There are some things written a better way in comparison with
version 4, mainly there's no hack in tests/networkxml2argvtest.c and
also the xPath context is changed to use a simpler query using the
virXPathInt() function relative to the current node.
Also, the patch is also fixing the networkxml2argv test to pass both
checks, i.e. both unit tests and also syntax check.
Please review,
Michal
Signed-off-by: Michal Novotny <minovotn@redhat.com>
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
The virtual port profile parsing/formatting APIs do not
correctly handle unknown profile type strings/numbers.
They behave as a no-op, instead of raising an error
* src/util/network.c, src/util/network.h: Fix error
handling of port profile APIs
* src/conf/domain_conf.c, src/conf/network_conf.c: Update
for API changes
Rename the virVirtualPortProfileParams struct to be
virNetDevVPortProfile, and rename the APIs to match
this prefix.
* src/util/network.c, src/util/network.h: Rename port profile
APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c, src/qemu/qemu_hotplug.c,
src/util/macvtap.c, src/util/macvtap.h: Update for
renamed APIs/structs
The socket address APIs in src/util/network.h either take the
form virSocketAddrXXX, virSocketXXX or virSocketXXXAddr.
Sanitize this so everything is virSocketAddrXXXX, and ensure
that the virSocketAddr parameter is always the first one.
* src/util/network.c, src/util/network.h: Santize socket
address API naming
* src/conf/domain_conf.c, src/conf/network_conf.c,
src/conf/nwfilter_conf.c, src/network/bridge_driver.c,
src/nwfilter/nwfilter_ebiptables_driver.c,
src/nwfilter/nwfilter_learnipaddr.c,
src/qemu/qemu_command.c, src/rpc/virnetsocket.c,
src/util/dnsmasq.c, src/util/iptables.c,
src/util/virnetdev.c, src/vbox/vbox_tmpl.c: Update for
API renaming
More simplifications possible due to auto-indent. Also,
<bandwidth> within <actual> was only using 6 instead of 8 spaces.
* src/util/network.h (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter signature.
* src/util/network.c (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter indentation.
(virBandwidthChildDefFormat): Tweak to make use easier.
* src/conf/network_conf.c (virPortGroupDefFormat)
(virNetworkDefFormat): Adjust callers.
* src/conf/domain_conf.c (virDomainNetDefFormat): Likewise.
(virDomainActualNetDefFormat): Likewise, and fix bandwidth
indentation.
Commit 498d783 cleans up some of virtual file names for parsing strings
in memory. This patch cleans up (hopefuly) the rest forgotten by the
first patch.
This patch also changes all of the previously modified "filenames" to
valid URI's replacing spaces for underscores.
Changes to v1:
- Replace all spaces for underscores, so that the strings form valid
URI's
- Replace spaces in places changed by commit 498d783
While the first encountered dns host record is being parsed, it's
possible for virNetworkDef::hosts to point to memory that has been
allocated, but virNetworkDef::nhosts to still be 0. If there is a
failure during that time, virNetworkDef::hosts will be leaked.
Although this isn't currently the case for virNetworkDef::txtrecords,
it could become that way through future re-factoring, and it hurts
nothing to restructure the freeing of txtrecord data to match that of
hosts data.
Every DomainNetDef has a bandwidth, as does every portgroup.
Whenever a DomainNetDef of type NETWORK is about to be used, a call is
made to networkAllocateActualDevice(). This function chooses the "best"
bandwidth object and places it in the DomainActualNetDef.
From that point on, whenever some code needs to use the bandwidth data
for the interface, it's retrieved with virDomainNetGetActualBandwidth(),
which will always return the "best" info as determined in the
previous step.
These functions parse given XML node and return pointer to the
output. Unknown elements are silently ignored. Attributes must
be integer and must fit in unsigned long long.
Free function frees elements of virBandwidth structure.
The network XML is updated in the following ways:
1) The <forward> element can now contain a list of forward interfaces:
<forward .... >
<interface dev='eth10'/>
<interface dev='eth11'/>
<interface dev='eth12'/>
<interface dev='eth13'/>
</forward>
The first of these takes the place of the dev attribute that is
normally in <forward> - when defining a network you can specify
either one, and on output both will be present. If you specify
both on input, they must match.
2) In addition to forward modes of 'nat' and 'route', these new modes
are supported:
private, passthrough, vepa - when this network is referenced by a
domain's interface, it will have the same effect as if the
interface had been defined as type='direct', e.g.:
<interface type='direct'>
<source mode='${mode}' dev='${dev}>
...
</interface>
where ${mode} is one of the three new modes, and ${dev} is an interface
selected from the list given in <forward>.
bridge - if a <forward> dev (or multiple devs) is defined, and
forward mode is 'bridge' this is just like the modes 'private',
'passthrough', and 'vepa' above. If there is no forward dev
specified but a bridge name is given (e.g. "<bridge
name='br0'/>"), then guest interfaces using this network will use
libvirt's "host bridge" mode, equivalent to this:
<interface type='bridge'>
<source bridge='${bridge-name}'/>
...
</interface>
3) A network can have multiple <portgroup> elements, which may be
selected by the guest interface definition (by adding
"portgroup='${name}'" in the <source> element along with the
network name). Currently a portgroup can only contain a
virtportprofile, but the intent is that other configuration items
may be put there int the future (e.g. bandwidth config). When
building a guest's interface, if the <interface> XML itself has no
virtportprofile, and if the requested network has a portgroup with
a name matching the name given in the <interface> (or if one of the
network's portgroups is marked with the "default='yes'" attribute),
the virtportprofile from that portgroup will be used by the
interface.
4) A network can have a virtportprofile defined at the top level,
which will be used by a guest interface when connecting in one of
the 'direct' modes if the guest interface XML itself hasn't
specified any virtportprofile, and if there are also no matching
portgroups on the network.
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
This commit introduces names definition for the DNS hosts file using
the following syntax:
<dns>
<host ip="192.168.1.1">
<name>alias1</name>
<name>alias2</name>
</host>
</dns>
Some of the improvements and fixes were done by Laine Stump so
I'm putting him into the SOB clause again ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
This commit introduces the <dns> element and <txt> record for the
virtual DNS network. The DNS TXT record can be defined using following
syntax in the network XML file:
<dns>
<txt name="example" value="example value" />
</dns>
Also, the Relax-NG scheme has been altered to allow the texts without
spaces only for the name element and some nitpicks about memory
free'ing have been fixed by Laine so therefore I'm adding Laine to the
SOB clause ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
Users often edit XML file stored in configuration directory
thinking of modifying a domain/network/pool/etc. Thus it is wise
to let them know they are using the wrong way and give them hint.
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose. Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.
global rename performed with:
$ git grep -l virBufferVSprintf \
| xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'
then revert the changes in ChangeLog-old.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463
The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".
The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).
Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.
I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.
Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).
docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
auto-generate mac address when needed,
create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
This is partially in response to
https://bugzilla.redhat.com/show_bug.cgi?id=653300
The crash in that report was coincidentally fixed when we switched
from using inet_pton() to using virSocketParseAddr(), but the absence
of an ip address in a dhcp static host definition was still silently
ignored (and that entry discarded from the saved XML). This patch
turns that into a logged failure; likewise if the entry has neither a
mac address nor a name attribute (the entry is useless without at
least one of those, plus an ip address).
Since the network name is now pulled into this function in order for
those error logs to be more informative, the other error messages in
the function have also been changed to take advantage.
This commit adds support for IPv6 parsing and formatting to the
virtual network XML parser, including moving around data definitions
to allow for multiple <ip> elements on a single network, but only
changes the consumers of this API to accommodate for the changes in
API/structure, not to add any actual IPv6 functionality. That will
come in a later patch - this patch attempts to maintain the same final
functionality in both drivers that use the network XML parser - vbox
and "bridge" (the Linux bridge-based driver used by the qemu
hypervisor driver).
* src/libvirt_private.syms: Add new private API functions.
* src/conf/network_conf.[ch]: Change C data structure and
parsing/formatting.
* src/network/bridge_driver.c: Update to use new parser/formatter.
* src/vbox/vbox_tmpl.c: update to use new parser/formatter
* docs/schemas/network.rng: changes to the schema -
* there can now be more than one <ip> element.
* ip address is now an ip-addr (ipv4 or ipv6) rather than ipv4-addr
* new optional "prefix" attribute that can be used in place of "netmask"
* new optional "family" attribute - "ipv4" or "ipv6"
(will default to ipv4)
* define data types for the above
* tests/networkxml2xml(in|out)/nat-network.xml: add multiple <ip> elements
(including IPv6) to a single network definition to verify they are being
correctly parsed and formatted.
When a netmask isn't specified for an IPv4 address, one can be implied
based on what network class range the address is in. The
virNetworkDefPrefix function does this for us, so netmask isn't
required.
Later patches will add the possibility to define a network's netmask
as a prefix (0-32, or 0-128 in the case of IPv6). To make it easier to
deal with definition of both kinds (prefix or netmask), add two new
functions:
virNetworkDefNetmask: return a copy of the netmask into a
virSocketAddr. If no netmask was specified in the XML, create a
default netmask based on the network class of the virNetworkDef's IP
address.
virNetworkDefPrefix: return the netmask as numeric prefix (or the
default prefix for the network class of the virNetworkDef's IP
address, if no netmask was specified in the XML)
Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.
* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.
The network address was being set to 192.168.122.0 instead
of 192.168.122.0/24. Fix this by removing the unneccessary
'network' field from virNetworkDef and just pass the
network address and netmask into the iptables APIs directly.
* src/conf/network_conf.h, src/conf/network_conf.c: Remove
the 'network' field from virNEtworkDef.
* src/network/bridge_driver.c: Update for iptables API changes
* src/util/iptables.c, src/util/iptables.h: Require the
network address + netmask pair to be passed in
The boot server IP address is optional, so it needs to be
checked before attempting to parse it.
* src/conf/network_conf.c: Don't parse NULL ip address for
boot server
Instead of storing the IP address string in virNetwork related
structs, store the parsed virSocketAddr. This will make it
easier to add IPv6 support in the future, by letting driver
code directly check what address family is present
* src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c: Convert to use virSocketAddr
in virNetwork, instead of char *.
* src/util/bridge.c, src/util/bridge.h,
src/util/dnsmasq.c, src/util/dnsmasq.h,
src/util/iptables.c, src/util/iptables.h: Convert to
take a virSocketAddr instead of char * for any IP
address parameters
* src/util/network.h: Add macros to determine if an address
is set, and what address family is set.
The inet_pton and inet_ntop functions are obsolete, replaced
by getaddrinfo+getnameinfo with the AI_NUMERICHOST flag set.
These can be accessed via the virSocket APIs.
The bridge.c code had methods for fetching the IP address of
a bridge which used inet_ntop. Aside from the use of inet_ntop
these methods are broken, because a NIC can have multiple
addresses and this only returns one address. Since the methods
are never used, just remove them.
* src/conf/network_conf.c, src/nwfilter/nwfilter_learnipaddr.c:
Replace inet_pton and inet_ntop with virSocket APIs
* src/util/bridge.c, src/util/bridge.h: Remove unused methods
which called inet_ntop.
The virSocketParse method was not doing any error reporting
which meant the true cause of the problem was lost. Remove
all error reporting from callers, and push it into virSocketParse
* src/util/network.c: Add error reporting to virSocketParse
* src/conf/domain_conf.c, src/conf/network_conf.c,
src/network/bridge_driver.c: Remove error reporting in
callers of virSocketParse
The virSocketParseAddr function was accepting any AF_* constant
and using that to set the ai_flags field in struct addrinfo.
This is invalid, since address families must go in the ai_family
field of the struct.
* src/util/network.c: Fix handling of address family
* src/conf/network_conf.c, src/network/bridge_driver.c: Pass
AF_UNSPEC instead of relying on it being 0.
Since bugs due to double-closed file descriptors are difficult to track down in a multi-threaded system, I am introducing the VIR_CLOSE(fd) macro to help avoid mistakes here.
There are lots of places where close() is being used. In this patch I am only cleaning up usage of close() in src/conf where the problems were.
I also dare to declare close() as being deprecated in libvirt code base (HACKING).
The network driver is not doing correct checking for
duplicate UUID/name values. This introduces a new method
virNetworkObjIsDuplicate, based on the previously
written virDomainObjIsDuplicate.
* src/conf/network_conf.c, src/conf/network_conf.c,
src/libvirt_private.syms: Add virNetworkObjIsDuplicate,
* src/network/bridge_driver.c: Call virNetworkObjIsDuplicate
for checking uniqueness of uuid/names
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match
Found while trying to cross-compile libvirt on Fedora 12 for Windows.
gnulib redefines 'close' to 'close_used_without_including_unistd_h'
in sys/socket.h if winsock2.h is present and unistd.h has not been
included before sys/socket.h. Reorder some includes to fix this.
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
* src/conf/network_conf.h: extend the structure to store the range
* src/conf/network_conf.c: before adding a range parse the IP addresses
do some checking and keep the size
Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/interface_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/lxc/lxc_driver.c,
src/network/bridge_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
renamed APIs.
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
When specifying bridge delay via network XML define, we were looking for
the 'delay' attribute, but would dump the value as 'forwardDelay'. Have
the output match the expected input (and schema).
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
