If a management application wants to use firmware auto selection
feature it can't currently know if the libvirtd it's talking to
support is or not. Moreover, it doesn't know which values that
are accepted for the @firmware attribute of <os/> when parsing
will allow successful start of the domain later, i.e. if the mgmt
application wants to use 'bios' whether there exists a FW
descriptor in the system that describes bios.
This commit then adds 'firmware' enum to <os/> element in
<domainCapabilities/> XML like this:
<enum name='firmware'>
<value>bios</value>
<value>efi</value>
</enum>
We can see both 'bios' and 'efi' listed which means that there
are descriptors for both found in the system (matched with the
machine type and architecture reported in the domain capabilities
earlier and not shown here).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Quite a few of the tests have a need to mock the stat() / lstat()
functions and they are taking somewhat different & inconsistent
approaches none of which are actually fully correct. This is shown
by fact that 'make check' fails on 32-bit hosts. Investigation
revealed that the code was calling into the native C library impl,
not getting intercepted by our mocks.
The POSIX stat() function might resolve to any number of different
symbols in the C library.
The may be an additional stat64() function exposed by the headers
too.
On 64-bit hosts the stat & stat64 functions are identical, always
refering to the 64-bit ABI.
On 32-bit hosts they refer to the 32-bit & 64-bit ABIs respectively.
Libvirt uses _FILE_OFFSET_BITS=64 on 32-bit hosts, which causes the
C library to transparently rewrite stat() calls to be stat64() calls.
Libvirt will never see the 32-bit ABI from the traditional stat()
call. We cannot assume this rewriting is done using a macro. It might
be, but on GLibC it is done with a magic __asm__ statement to apply
the rewrite at link time instead of at preprocessing.
In GLibC there may be two additional functions exposed by the headers,
__xstat() and __xstat64(). When these exist, stat() and stat64() are
transparently rewritten to call __xstat() and __xstat64() respectively.
The former symbols will not actally exist in the library at all, only
the header. The leading "__" indicates the symbols are a private impl
detail of the C library that applications should not care about.
Unfortunately, because we are trying to mock replace the C library,
we need to know about this internal impl detail.
With all this in mind the list of functions we have to mock will depend
on several factors
- If _FILE_OFFSET_BITS is set, then we are on a 32-bit host, and we
only need to mock stat64 and __xstat64. The other stat / __xstat
functions exist, but we'll never call them so they can be ignored
for mocking.
- If _FILE_OFFSET_BITS is not set, then we are on a 64-bit host and
we should mock stat, stat64, __xstat & __xstat64. Either may be
called by app code.
- If __xstat & __xstat64 exist, then stat & stat64 will not exist
as symbols in the library, so the latter should not be mocked.
The same all applies to lstat()
These rules are complex enough that we don't want to duplicate them
across every mock file, so this centralizes all the logic in a helper
file virmockstathelper.c that should be #included when needed. The
code merely need to provide a filename rewriting callback called
virMockStatRedirect(). Optionally VIR_MOCK_STAT_HOOK can be defined
as a macro if further processing is needed inline.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Had this been in place earlier, I would have avoided the bugs in
commit 0baf6945 and 55c2ab3e. Writing the test required me to extend
the power of virsh - creating enough snapshots to cause fanout
requires enough input in a single session that adding comments and
markers makes it easier to check that output is correct. It's still a
bit odd that with test:///default, reverting to a snapshot changes the
domain from running to paused (possibly a bug in how the test driver
copied from the qemu driver) - but the important part is that the test
is reproducible, and any future tweaks we make to snapshot code have
less chance of breaking successful command sequences.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.
This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
LIBVIRT_DRIVER_DIR is defined as (what is for all intents and
purposes equivalent to) "$(abs_top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search that
directory automatically, which means passing it through the
environment is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's no longer used as of commit a9694a8e18.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We're not using any of the functionality offered by the
module at the moment, but we will in just a second.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1564270
Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.
At the same time, introduce bunch of tests to test the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Test firmware description parsing so far.
The test files come from three locations:
1) ovmf-sb-keys.json and ovmf-sb.json come from OVMF
package from RHEL-7 (with slight name change to reflect their
features in filename too),
2) bios.json and aavmf.json come from example JSON documents from
firmware.json from qemu's git (3a0adfc9bf),
3) ovmf.json is then copied from ovmf-sb.json and stripped
of SECURE_BOOT and REQUIRES_SMM flags, OVMF path change,
description update and machine type expanded for both pc and q35
machine types.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
So far we are providing the suppressions file with a relative
path to valgrind. This apparently doesn't work on some distros
like Ubuntu and its derivates. Providing the absolute path fixes
the problem.
Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new test for the storage pool capabilities. There will be
one test mocked with every backend available (full) and one where
only the file system pool is available.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Define a schema for the storage pool capabilities along with
a test to show the general format.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
This allows us to mock functions in the libxl driver, like
is already possible for the qemu driver
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Every other mock library is named ending in mock.c, move
virmocklibxl.c to follow that pattern
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
A lot of code with no real impact and popularity. Remove all the helpers
now that the only test case is gone.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Commit f2f84b4d4 added storagepoolxml2argvtest processing; however,
it didn't follow alter the else to !WITH_STORAGE and add the source
itself to the EXTRA_DIST like the other WITH_STORAGE options for
virstorageutiltest and storagevolxml2argvtest.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 7a227688a caused a build failure on mingw. Following
other uses of including ../src/libvirt_driver_storage_impl.la
I moved to under the WITH_STORAGE conditional.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.
Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.
Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.
Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our use of INCLUDES in Makefile.am hearkens back to when we had to
cater to automake 1.9.6 (thanks, RHEL 5) which lacked AM_CPPFLAGS.
Modern Automake flags a warning that INCLUDES is deprecated, and
now that we mandate RHEL 7 or better (see commit c1bc9c66), we no
longer have to cater to the old spelling. This change will also
make it easier to do per-binary CPPFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c0a8ea45 removed the use of gettextize, and the setting of
GETTEXT_CPPFLAGS, but did not scrub the now-unused variable from
Makefile.am snippets.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This test checks if security label remembering works correctly.
It uses qemuSecurity* APIs to do that. And some mocking (even
though it's not real mocking as we are used to from other tests
like virpcitest). So far, only DAC driver is tested.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure that we don't add any broken error message strings any more.
This ensures that both the version with and without additional info is
populated, the version without info does not have any formatting
modifiers and the version with info has exactly one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similar to qemuxml2argv and storagevolxml2argv, let's create some
tests to ensure that the XML generates a consistent command line.
Using the same list of pools as storagepoolxml2xmltest, start with
the file system tests (fs, netfs, netfs-cifs, netfs-gluster).
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce some basic test cases for virFileIsSharedFS(). More
will be added later. In order to achieve desired result, mocks
for setmntent() and statfs() need to be invented because the
first thing that virFileIsSharedFS() does is calling the latter.
If it finds a FUSE mount it'll call the former.
The mock might look a bit complicated, but in fact it's quite
simple. The test sets LIBVIRT_MTAB env variable to hold the
absolute path to a file containing mount table. Then, statfs()
returns matching FS it finds, and setmntent() is there just to
replace /proc/mounts with the file the test wants to load.
Adding this test also exposed a bug we have - because we assume
the given path points to a file we cut off what we assume is a
file name to obtain directory path and only then we call
statfs(). This is buggy because the passed path could be already
a mount point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The directory has been renamed in 562990849a, but a
reference to it was not updated at the same time, causing
'make dist' to fail ever since. Fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For now, there are 9 test cases
- testVshTableNew: Creating table with empty header
- testVshTableHeader: Printing table with/without header
- testVshTableRowAppend: Appending row with various number of cells.
Only row with same number of cells as in header is accepted.
- testUnicode: Printing table with unicode characters.
Checking correct alignment.
- testUnicodeArabic: test opposite (right to left) writing
- testUnicodeZeroWidthChar
- testUnicodeCombiningChar
- testUnicodeNonPrintableChar,
- testNTables: Create and print varios types of tables - one column,
one row table, table without content, standart table...
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
This reverts commit 9cf38263d0.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.
All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versionshttps://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson
Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.
Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.
Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A typical XML representation of the virNWFilterBindingDefPtr struct
looks like this:
<filterbinding>
<owner>
<name>f25arm7</name>
<uuid>12ac8b8c-4f23-4248-ae42-fdcd50c400fd</uuid>
</owner>
<portdev name='vnet1'/>
<mac address='52:54:00:9d:81:b1'/>
<filterref filter='clean-traffic'>
<parameter name='MAC' value='52:54:00:9d:81:b1'/>
</filterref>
</filterbinding>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since GnuTLS is required there is no way to go with !WITH_GNUTLS
branch and just distribute these files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't use the text monitor since we dropped support for pre-JSON
qemus. Drop the test so that we can later delete the text monitor
support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a lot of our mocks (if not all of them) we use our internal
APIs (e.g. VIR_ALLOC). So far, we're relying on test binary that
links with the mock to drag in libvirt.so. Well, this works only
partially. Firstly, whatever binary we execute from tests will
fail (e.g. as Martin reported on the list ./qemucapsprobe fails
to execute qemu). Secondly, if there's a program that tries to
validate linking (like valgrind is doing) it fails because of
unresolved symbols.
Because of that we have to link our mocks with libvirt.so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a test infrastructure that will allow testing the JSON object
generator used for generating data to use with blockdev-add.
The resulting disk including the backing chain is validated to conform
to the QAPI schema and the expected output files.
The first test cases make sure that libvirt will not allow nodenames
exceeding 31 chars.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove gnulib from _LDADD and move LDADDS to replace it. Also reformat
the _SOURCES so that they can be easily extended.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Preparation for global nestedhvm configuration - libxlMakeDomBuildInfo
needs access to libxlDriverConfig.
No functional change.
Adjusting tests require slightly more mockup functions, because of
libxlDriverConfigNew() call.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This is an enhanced replacement for the original test from
qemumonitorjsontest which was dropped earlier in this series. More data
files with some real data will be added in the following patches.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the qmpOnly argument of virQEMUCapsNewForBinaryInternal
and instead always assume it's true.
This effectively sets the minimum QEMU version to 1.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In preparation of removing the legacy Xen driver, move the
xmconfig tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert xm config to XML. Requires fixing up the tests to account
for different behavior of Xen vs libxl post parse functions. For
consistency with other Xen config tests, change the <os> arch to
x86_64.
There is some test file fallout due to differences in handling of
default values between xend and libxl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation of removing the legacy Xen driver, move the
sexpr2xml tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert sexpr to XML. Requires fixing up the tests to account
for different behavior of Xen vs libxl post parse functions.
There is some test file fallout due to differences in handling
of default values between xend and libxl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation of removing the legacy Xen driver, move the
xml2sexpr tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert sexpr <-> XML.
There is some test file fallout due to differences in handling
of default values between xend and libxl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
