Commit Graph

19030 Commits

Author SHA1 Message Date
Peter Krempa
32288fc9b9 qemu: monitor: Drop parsing of 'errs' from block info
The error count statistic is not supported by qemu, so there's no need
to pass the variables around if the result is ignored anyways.
2015-03-11 11:28:03 +01:00
Peter Krempa
7e9fb15145 qemu: Use macro to set block stats typed parameters
All the setters are the same code except for parameter name and
variable, so they can be converted to a macro to save a ton of
duplicated code.
2015-03-11 11:28:03 +01:00
Michal Privoznik
6cc5080a09 RNG: Allow multiple parameters to be passed to an interface filter
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.

Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-11 09:54:29 +01:00
Maxim Nestratov
0473e1bb16 parallels: prevent domain define only if vcpupin is specified
and their settings differ from common cpumask

Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
2015-03-11 09:00:28 +01:00
Maxim Nestratov
3f2d67bbfa parallels: prevent domain define only if NUMA is really specified
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
2015-03-11 09:00:28 +01:00
Maxim Nestratov
2add64a0cf parallels: don't forget to unlock domain in parallelsDomainHasManagedSaveImage
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
2015-03-11 09:00:14 +01:00
Maxim Nestratov
a4e0f2343f parallels: cpumask support
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
2015-03-11 08:24:42 +01:00
Michael Chapman
616003d6bd domain_conf: fix crash in virDomainObjListFindByUUIDInternal
If a domain object is being removed and looked up concurrently we must
ensure we unlock the object before unreferencing it, since the latter
might free the object.

The flaw was introduced in commit feb1a4d792.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2015-03-11 08:20:51 +01:00
Michael Chapman
a6ec4f472d {domain, network}_conf: disable autostart when deleting config
Undefining a running, autostarted domain removes the autostart link, but
dom->autostart is not cleared. If the domain is subsequently redefined,
libvirt thinks it is already autostarted and will not create the link
even if requested:

  # virsh dominfo example | grep Autostart
  Autostart:      enable

  # ls /etc/libvirt/qemu/autostart/example.xml
  /etc/libvirt/qemu/autostart/example.xml

  # virsh undefine example
  Domain example has been undefined

  # virsh define example.xml
  Domain example defined from example.xml

  # virsh dominfo example | grep Autostart
  Autostart:      enable

  # virsh autostart example
  Domain example marked as autostarted

  # ls /etc/libvirt/qemu/autostart/example.xml
  ls: cannot access /etc/libvirt/qemu/autostart/example.xml: No such file or directory

This commit ensures dom->autostart is cleared whenever the config and
autostart link (if present) are removed.

The bridge network driver cleared this flag itself in networkUndefine.
This commit moves this into virNetworkDeleteConfig for symmetry with
virDomainDeleteConfig, and to ensure it is not missed in future network
drivers.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2015-03-11 07:16:25 +01:00
Luyao Huang
64595431cd qemu: Remove unnecessary virReportError on networkGetNetworkAddress return
Error messages are already set in all code paths returning -1 from
networkGetNetworkAddress, so we don't want to overwrite them.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-03-10 17:29:28 -04:00
Michal Privoznik
954427c354 virQEMUCapsInitQMP: Don't dispose locked @vm
When creating qemu capabilities, a dummy virDomainObj is created just
because our monitor code expects that. However, the object is created
locked already. Then, under cleanup label, we simply unref the object
which results in whole domain object to be disposed. The object lock
is destroyed subsequently, but hey - it's still locked:

==24845== Thread #14's call to pthread_mutex_destroy failed
==24845==    with error code 16 (EBUSY: Device or resource busy)
==24845==    at 0x4C3024E: pthread_mutex_destroy (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==24845==    by 0x531F72E: virMutexDestroy (virthread.c:83)
==24845==    by 0x5302977: virObjectLockableDispose (virobject.c:237)
==24845==    by 0x5302A89: virObjectUnref (virobject.c:265)
==24845==    by 0x1DD37866: virQEMUCapsInitQMP (qemu_capabilities.c:3397)
==24845==    by 0x1DD37CC6: virQEMUCapsNewForBinary (qemu_capabilities.c:3481)
==24845==    by 0x1DD381E2: virQEMUCapsCacheLookup (qemu_capabilities.c:3609)
==24845==    by 0x1DD30F8A: virQEMUCapsInitGuest (qemu_capabilities.c:744)
==24845==    by 0x1DD31889: virQEMUCapsInit (qemu_capabilities.c:1020)
==24845==    by 0x1DD7DD36: virQEMUDriverCreateCapabilities (qemu_conf.c:888)
==24845==    by 0x1DDC57C0: qemuStateInitialize (qemu_driver.c:803)
==24845==    by 0x53DC743: virStateInitialize (libvirt.c:777)
==24845==

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-10 17:32:12 +01:00
Chen Fan
f276b36d65 qemu: fix memory leak in qemuAgentGetFSInfo
in virDomainFSInfoFree(), don't free the virDomainFSInfo data.

==10670== 80 bytes in 2 blocks are definitely lost in loss record 576 of 793
==10670==    at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==10670==    by 0x509DEBD: virAlloc (viralloc.c:144)
==10670==    by 0x19FBD558: qemuAgentGetFSInfo (qemu_agent.c:1837)
==10670==    by 0x1A03CF91: qemuDomainGetFSInfo (qemu_driver.c:19238)

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
2015-03-10 15:29:28 +01:00
Ján Tomko
5989b00563 Reverse the logic in virbitmaptest
Test the whole range in testBit, not just the first bit.
2015-03-10 13:45:51 +01:00
Ján Tomko
7b2f12fe28 Use virBitmapNextClearBit in networkNextClassID
Instead of finding the next clear bit by calling virBitmapGetBit
in a loop, use the virBitmapNextClearBit helper.
2015-03-10 13:45:51 +01:00
Laine Stump
705242f880 qemu: don't fill in nicindexes for session mode libvirtd
Commit 4bbe1029f fixed a problem in commit f7afeddc by moving the call
to virNetDevGetIndex() to a location common to all interface types (so
that the nicindex array would be filled in for macvtap as well as tap
interfaces), but the location was *too* common, as the original call
to virNetDevGetIndex() had been in a section qualified by "if
(cfg->privileged)". The result was that the "fixed" libvirtd would try
to call virNetDevGetIndex() even for session mode libvirtd, and end up
failing with the log message:

  Unable to open control socket: Operation not permitted

To remedy that, this patch qualifies the call to virNetDevGetIndex()
in its new location with cfg->privileged.

This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1198244
2015-03-10 07:53:10 -04:00
Michal Privoznik
a663c34ad0 virnet*: Don't unlock object in dispose
As of bba93d40 all of our RPC objects are derived from
virObjectLockable. However, during rewrite some errors sneaked
in. For instance, the dispose functions to virNetClient and
virNetServerClient objects were not only freeing allocated
memory, but unlocking themselves. This is wrong. Object should
never disappear while locked.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-10 12:36:08 +01:00
Pavel Hrdina
242e8c5472 docs: add a note that spice channel is usable only with spice graphics
To prevent a confusion about missing chardev argument in qemu
command line add a note about that behavior into documentation.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129198

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-10 11:16:21 +01:00
Pavel Hrdina
b7d027b6a8 net-define: update or unify documentation
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1127045

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-09 14:48:38 +01:00
Pavel Hrdina
03369d9643 pool-define: update and unify documentation
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1127045

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-09 14:47:53 +01:00
Pavel Hrdina
0632555927 iface-define: update and unify documentation
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1127045

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-09 14:47:07 +01:00
Michal Privoznik
367363659b network_conf: Turn struct _virNetworkObjList private
Now that all the code uses accessors, don't expose the structure
anyway.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
88aed14f12 network_conf: Turn virNetworkObjList into virObject
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
58092dfe87 parallels_network: Adapt to new virNetworkObjList accessors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
d8e01f527b test_driver: Adapt to new virNetworkObjList accessors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
b61db335f9 bridge_driver: Adapt to new virNetworkObjList accessors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
292acd202f network_conf: Introduce virNetworkObjListPrune
The API will iterate over the list of network object and remove
desired ones from it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
0ae7def635 network_conf: Introduce virNetworkObjListNumOfNetworks
An accessor following pattern laid out by virDomainObjList* APIs.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
5a13c48b73 network_conf: Introduce virNetworkObjListGetNames
An accessor following pattern laid out by virDomainObjList* APIs.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Michal Privoznik
454fe219ef network_conf: Introduce virNetworkObjListForEach
This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-09 14:03:30 +01:00
Jiri Denemark
54972be843 sanlock: Don't spam logs with "target pid not found"
Commit v1.2.4-52-gda879e5 fixed issues with domains started before
sanlock driver was enabled by checking whether a running domain is
registered with sanlock and if it's not, sanlock driver is basically
ignored for the domain.

However, it was checking this even for domain which has just been
started and no sanlock_* API was called for them yet. This results in

    cmd 9 target pid 2135544 not found

error messages to appear in sanlock.log whenever we start a new domain.

This patch avoids this useless check for freshly started domains.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-03-09 13:36:40 +01:00
Jiri Denemark
6beb75d96d locking: Fix flags in virLockManagerLockDaemonNew
virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-03-09 13:36:39 +01:00
Pavel Hrdina
c2851781f1 tests: fix qemuxml2argvtest to be arch independent
Commit 5aee81a0 introduced a new test for disk-serial.  The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line.  To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-09 13:34:37 +01:00
John Ferlan
86ef105a1d qemu: Change qemuDomainGetEmulatorPinInfo bitmap manipulation
Follow-up to the IOThread review on CPU affinity map manipulation:

http://www.redhat.com/archives/libvir-list/2015-March/msg00294.html

indicates that the GetEmulatorPinInfo could use similar algorithm adjustments
which is what this patch does.
2015-03-09 08:11:49 -04:00
John Ferlan
10f2740ae3 qemu: Change qemuDomainGetVcpuPinInfo bitmap manipulation
Follow-up to the IOThread review on CPU affinity map manipulation:

http://www.redhat.com/archives/libvir-list/2015-March/msg00294.html

indicates that the GetVcpuPinInfo could use similar algorithm adjustments
which is what this patch does.
2015-03-09 08:11:49 -04:00
John Ferlan
fcb13292b1 qemu: Resolve Coverity CHECKED_RETURN issue
By adding a call and check of return of virBitmapToData to the
IOThreads code, my Coverity checker lets me know qemuDomainHelperGetVcpus
also needs to check the status...
2015-03-09 08:11:49 -04:00
John Ferlan
daefe3f300 qemu: Change/Fix IOThread CPU affinity bitmap manipulation
Based on review:

http://www.redhat.com/archives/libvir-list/2015-March/msg00294.html

Adjust how the cpumap and cpumaplen to be returned are generated
2015-03-09 08:11:43 -04:00
John Ferlan
69e5f37c4a Remove ReadOnly check for GetIOThreadsInfo 2015-03-09 06:41:44 -04:00
John Ferlan
a60f69dfb7 Fix syntax for vcpupin description 2015-03-09 06:41:44 -04:00
Martin Kletzander
5882064084 tests: Add test for os interleaving
We don't usually do tests purely for one change, but one change was
special because when users will migrate to OVMF/AAVMF, commit 18f9f69b
makes their lives easier by allowing them to interleave <type/> inside
<os/>.  It would be nice of us to keep the possibility of them pasting
the loader and nvram elements wherever it is valid, hence this test.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-09 07:52:34 +01:00
Martin Kletzander
6b22e0b562 tests: Add test for virtio-mmio address type
Commit 3e4b783e fixed an issue with RNG schema where this address type
was missing, this commit adds a test for it.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-09 07:52:34 +01:00
Michal Privoznik
b39b1397ea domain_conf: Format <pvpanic/> without address correctly
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):

  <devices>
    <emulator>/usr/bin/qemu</emulator>
    ...
    <panic>
    </panic>
  </devices>

Lets format "<panic/>" instead.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-06 14:22:45 +01:00
Daniel P. Berrange
d196444c49 Refresh translations from Zanata
Delete .po files which contain zero translated strings. Refresh
the .pot file and pull down latest translations from Zanata.

When refreshing the libvirt.pot, it can be pushed to zanata
and .po files resynchonized using

 # cd po
 # rm libvirt.pot
 # make libvirt.pot
 # zanata-cli push
 # zanata-cli pull

Note there is no need for 'make update-po', as long as you do
a zanata push, immediately followed by zanata pull, as the
Zanata server will ensure the .po files downloaded match the
just pushed .pot file.

Note at time of writing, it is strongly recommended to only
use the zanata Java client binary (zanata-cli), and not the
python client binary (zanata). This is because the moderately
large size of the libvirt pot file is causing errors when the
python client tries to push, which have been known to result
in the loss of all translations on the server, as well as also
preventing uploading of .po files themselves :-(
2015-03-06 13:15:28 +00:00
John Ferlan
f41a5b844f virsh: Add 'iothreadsinfo' command
Add the 'iothreadsinfo' command to display IOThread Info data. Allow for
[--live] or [--config] options in order to display live or config data
for an active domain.

$ virsh iothreadsinfo --help
  NAME
    iothreadsinfo - view domain IOThreads

  SYNOPSIS
    iothreadsinfo <domain> [--config] [--live] [--current]

  DESCRIPTION
    Returns basic information about the domain IOThreads.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

An active domain may return:

$ virsh iothreads $dom
 IOThread ID     CPU Affinity
---------------------------------------------------
  1               2
  2               3
  3               0

$ echo $?
0

For domains which don't have IOThreads the following is returned:

$ virsh iothreads $dom
No IOThreads found for the domain

$ echo $?
0

For domains which are not running the following is returned:

$ virsh iothreads $dom --live
error: Unable to get domain IOThreads information
error: Requested operation is not valid: domain is not running

$ echo $?
1

Editing a domains configuration and modifying the iothreadpin data for
thread 3 from nothing provided to setting a cpuset of '0-1' and then
displaying using --config would display:

$ virsh iothreads f18iothr --config
 IOThread ID     CPU Affinity
 ----------------------------
  1               2
  2               3
  3               0-1

$

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-03-06 06:49:32 -05:00
John Ferlan
82649eb7f1 qemu: Implement the qemu driver fetch for IOThreads
Depending on the flags passed, either attempt to return the active/live
IOThread data for the domain or the config data.

The active/live path will call into the Monitor in order to get the
IOThread data and then correlate the thread_id's returned from the
monitor to the currently running system/threads in order to ascertain
the affinity for each iothread_id.

The config path will map each of the configured IOThreads and return
any configured iothreadspin data

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-03-06 06:49:32 -05:00
John Ferlan
1e5a8ddc81 remote: Implement the remote plumbing for virDomainGetIOThreadsInfo
Implement the remote plumbing for virDomainGetIOThreadsInfo

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-03-06 06:49:32 -05:00
John Ferlan
11a5a0956f Implement public API for virDomainGetIOThreadsInfo
Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.

For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.

The API supports either the --live or --config flag, but not both.

Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-03-06 06:49:32 -05:00
Pavel Hrdina
cf521fc8ba memtune: change the way how we store unlimited value
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user.  Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED.  Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.

Remove unnecessary function virCompareLimitUlong.  The update of test
is to prevent the 0 to be miss-used as unlimited in future.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-06 11:52:24 +01:00
Pavel Hrdina
a73395ae66 virutil: introduce helper functions for memory limits
The first one is to truncate the memory limit to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED if the value is greater and the second
one is to decide whether the memory limit is set or not, unlimited means
that it's not set.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-06 11:52:23 +01:00
Pavel Hrdina
c2020b08ce virsh: fix memtune to also accept 0 as valid value
Fix vshMemtuneGetSize to return correct value.  We can then decide
according that return code whether a parameter is present and valid or
not.  This will allow as to accept 0 as a valid value.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-06 11:52:15 +01:00
Stefan Berger
9954a8bfc2 qemu: Pass file descriptor when using TPM passthrough
Pass the TPM file descriptor to QEMU via command line.
Instead of passing /dev/tpm0 we now pass /dev/fdset/10 and the additional
parameters -add-fd set=10,fd=20.

This addresses the use case when QEMU is started with non-root privileges
and QEMU cannot open /dev/tpm0 for example.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2015-03-05 18:57:06 -05:00