Shorten the function name as there isn't any vshCommandOptString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch the command parser from using the VSH_OFLAG_REQ_OPT flag
opting out from positional parsing of arguments to a combination of the
'positional' flags for truly positional arguments and
'unwanted_positional' preserving semantics for the existing arguments
where the parser did it due to bad design.
This patch retires VSH_OFLAG_REQ_OPT along with the infrastructure that
was needed to refactor all uses properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the command parser in virsh parses/fills even optional
arguments with values as if they were positional unless opted out using
VSH_OFLAG_REQ_OPT. This creates unexpected situations when commands can
break in this unwanted semantics:
$ virsh snapshot-create-as --print-xml 1 2 3
<domainsnapshot>
<name>2</name>
<description>3</description>
</domainsnapshot>
To prevent any further addition annotate the rest of the arguments with
the 'unwanted_positional' flag, so that the parser can keep parsing them
as such but any further optional argument will not have this behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The macro is used in one place only and the command definition will be
altered. Inline it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was replaced by the 'required' field in the option definition.
Remove last few uses and all assignments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new 'positional' field to do decisions rather than have a
special type for positional strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add 'positional' and 'required' fields to vshCmdOptDef, which will
explicitly track the two properties of arguments.
To ensure that we have proper coverage, add checks to
vshCmddefCheckInternals validating the state of the above flags by
infering it from existing data.
This conversion will allow us:
- remove VSH_OT_DATA in favor of VSH_OT_STRING
- use VSH_OT_INT when required both as positional and non-positional
- properly annotate which VSH_OT_ARGV are positional and which are not
(currently inferred by whether an previous positional option exists)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the pointers to 'help' and 'description' information in the struct
directly rather than in a key-value list.
The generic approach never got any extra use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some description of virsh commands referenced itself in a multi-line
example of usage, which is pointless as virsh help already shows how to
use the command:
.data = N_("Get or set the current memory parameters for a guest"
" domain.\n"
" To get the memory parameters use following command: \n\n"
" virsh # memtune <domain>")
Change it to just state what the command does and leave the example for
the help printer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to print pages of a size larger than the UINT_MAX of the
given platform (for example, 4G on 64-bit ARM), results in a
system error even though this is a legitimate request.
The vshCommandOptScaledInt() used for parsing the pagesize is
given UINT_MAX as the upper limit. The parsed value is then
divided by 1024 and fed to virNodeGetFreePages() which expects an
unsigned int. We can't change the public API but the upper limit
can be raised by the factor of 1024.
Resolves: https://issues.redhat.com/browse/RHEL-23608
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While glibc provides qsort(), which usually is just a mergesort,
until sorting arrays so huge that temporary array used by
mergesort would not fit into physical memory (which in our case
is never), we are not guaranteed it'll use mergesort. The
advantage of mergesort is clear - it's stable. IOW, if we have an
array of values parsed from XML, qsort() it and produce some
output based on those values, we can then compare the output with
some expected output, line by line.
But with newer glibc this is all history. After [1], qsort() is
no longer mergesort but introsort instead, which is not stable.
This is suboptimal, because in some cases we want to preserve
order of equal items. For instance, in ebiptablesApplyNewRules(),
nwfilter rules are sorted by their priority. But if two rules
have the same priority, we want to keep them in the order they
appear in the XML. Since it's hard/needless work to identify
places where stable or unstable sorting is needed, let's just
play it safe and use stable sorting everywhere.
Fortunately, glib provides g_qsort_with_data() which indeed
implement mergesort and it's a drop in replacement for qsort(),
almost. It accepts fifth argument (pointer to opaque data), that
is passed to comparator function, which then accepts three
arguments.
We have to keep one occurance of qsort() though - in NSS module
which deliberately does not link with glib.
1: https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=03bf8357e8291857a435afcc3048e0b697b6cc04
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function returns how many array items were filled in, but virsh
never checked for anything other than errors. Just to make sure this
does not report invalid data, even though the only possibility would be
reporting 0 free pages, check the returned data so that possible errors
are detected.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit c35ba64d18235bfe35617cb3d6d6cc778f6d166d)
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When virsh connects to a non-hypervisor daemon directly (e.g.
"nodedev:///system") and user executes 'version' they are met
with an error message. This is because cmdVersion() calls
virConnectGetVersion() which fails, hence the error.
The reason for virConnectGetVersion() fail is simple - it's
documented as:
Get the version level of the Hypervisor running.
Well, there's no hypervisor in non-hypervisor daemons and thus it
doesn't make sense to provide an implementation in each driver's
virConnectDriver.hypervisorDriver table (just like we do for
other APIs, e.g. nodeConnectIsSecure()).
Given all of this, just make cmdVersion() deal with the error in
a non-fatal fashion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'domcapabilities' command since users might be interested only in
a subset of domcapabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'capabilities' command since users might be interested only in a
subset of capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This option can be used as a shortcut for creating a single XML with
just a CPU model name and no features:
$ virsh hypervisor-cpu-baseline --model Skylake-Server
<cpu mode='custom' match='exact'>
<model fallback='forbid'>Skylake-Server</model>
<feature policy='disable' name='avx512f'/>
<feature policy='disable' name='avx512dq'/>
<feature policy='disable' name='clwb'/>
<feature policy='disable' name='avx512cd'/>
<feature policy='disable' name='avx512bw'/>
<feature policy='disable' name='avx512vl'/>
<feature policy='disable' name='pku'/>
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I've came across an aarch64 system which supports hugepages up to
16GiB of size. However, I was unable to allocate them using
virsh allocpages. This is because cmdAllocpages() uses
vshCommandOptScaledInt(), which scales passed value into bytes,
but since the virNodeAllocPages() expects size in KiB the
variable holding bytes is then divided by 1024. However, the
limit for the biggest value passed to vshCommandOptScaledInt() is
UINT_MAX which is now obviously wrong, as it needs to be UINT_MAX
* 1024.
The same bug is in completer. But here, let's use ULLONG_MAX so
that we don't have to care about it anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are few places where a cleanup label contains nothing but a
return statement. Drop such labels and return directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The glib implementation doesn't tolerate NULL but in most cases we check
before anyways. The rest of the callers adds a NULL check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After the split of virsh to multiple files, and the subsequent
split to vsh/virt-admin, there are quite a few leftovers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
