Allow generation of command line for virtio-sound-pci and virtio-sound-device
devices along with additional virtio options.
A new testcase is added to test virtio-sound-pci. The
arm-vexpressa9-virtio testcase is also extended to test virtio-sound-device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds parsing of the virtio sound model, along with parsing
of virtio options and PCI/virtio-mmio address assignment.
A new 'streams' attribute is added for configuring number of PCM streams
(default is 2) in virtio sound devices. QEMU additionally has jacks and chmaps
parameters but these are currently stubbed, hence they are excluded in this
patch series.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability can be used to detect if the qemu binary already
supports 'ras' feature for 'virt' machine type.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The "quantum" attribute of HTB is documented as:
Number of bytes to serve from this class before the scheduler
moves to the next class.
Since v1.3.2-rc1~225 we compute what we think is the appropriate
value and pass it on the TC command line. But kernel and
subsequently TC use uint32_t to store this value. If we compute
value outside of this type then TC fails and prints usage which
we then interpret as an error message. Needlessly long error
message. While there's not much we can do about the latter, we
can put a cap on the value and stop tickling this behavior of TC.
Fixes: 065054daa7
Resolves: https://issues.redhat.com/browse/RHEL-34112
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit v10.0.0-265-ge67bca23e4 added a `active_config` and
`defined_config` to nodedev mdev internal XML handling.
`defined_config` can be filled at XML parse time, but `active_config`
must be filled in by nodedev driver. This wasn't implemented for the
test driver however, which caused virt-manager test suite regressions.
Working example:
```
$ virsh --connect test:///home/crobinso/src/virt-manager/tests/data/testdriver/testdriver.xml nodedev-dumpxml mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110
<device>
<name>mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110</name>
<path>/sys/devices/css0/0.0.0023/8e37ee90-2b51-45e3-9b25-bf8283c03110</path>
<parent>css_0_0_0023</parent>
<capability type='mdev'>
<type id='vfio_ccw-io'/>
<iommuGroup number='0'/>
</capability>
</device>
```
Broken example:
```
$ virsh --connect test:///home/crobinso/src/virt-manager/tests/data/testdriver/testdriver.xml nodedev-dumpxml mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110
<device>
<name>mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110</name>
<path>/sys/devices/css0/0.0.0023/8e37ee90-2b51-45e3-9b25-bf8283c03110</path>
<parent>css_0_0_0023</parent>
<capability type='mdev'>
<iommuGroup number='0'/>
</capability>
</device>
```
There's already code that does what we want in the test suite.
Move it to a shared function, and call it in test driver when
creating a nodedev from driver startup XML.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- Error if INACTIVE requested for transient object
- Force dumping INACTIVE XML when object is inactive
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was the implied default before nodedevs gained a notion of
being inactive and transient. It also matches the implied default
when parsing other object types
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Rework 'virDomainUSBDeviceDefForeach' to use virDomainDeviceInfoIterate
instead of open-coding all iterators. To achieve this
'virDomainDeviceIsUSB' needs to be fixed as it didn't properly handle
'sound', 'fs', 'chr', 'ccid', and 'net' usb devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
While QEMU accepts and interprets an empty string in the tls-hostname
field in migration parametes as if it's unset, the same does not apply
for the 'tls-hostname' field when 'blockdev-add'-ing a NBD backend for
non-shared storage migration.
When libvirt sets up migation with TLS in 'qemuMigrationParamsEnableTLS'
the QEMU_MIGRATION_PARAM_TLS_HOSTNAME migration parameter will be set to
empty string in case when the 'hostname' argument is passed as NULL.
Later on when setting up the NBD connections for non-shared storage
migration 'qemuMigrationParamsGetTLSHostname', which fetches the value
of the aforementioned TLS parameter.
This bug was mostly latent until recently as libvirt used
MIGRATION_DEST_CONNECT_HOST mode in most cases which required the
hostname to be passed, thus the parameter was set properly.
This changed with 8d693d79c4 for post-copy migration, where libvirt now
instructs qemu to connect and thus passes NULL hostname to
qemuMigrationParamsEnableTLS, which in turn causes libvirt to try to
add NBD connection with empty string as tls-hostname resulting in:
error: internal error: unable to execute QEMU command 'blockdev-add': Certificate does not match the hostname
To address this modify 'qemuMigrationParamsGetTLSHostname' to undo the
weird semantics the migration code uses to handle TLS hostname and make
it return NULL if the hostname is an empty string.
Fixes: e8fa09d66b
Resolves: https://issues.redhat.com/browse/RHEL-32880
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since OVS keeps desired state in a DB, upon sudden crash of the
host we may leave a port behind. There's no problem on VM
shutdown or NIC hotunplug as we call corresponding del-port
function (virNetDevOpenvswitchRemovePort()). But if the host
suddenly crashes we won't ever do that. What happens next, is
when OVS starts it finds desired state in its DB and creates a
stale port.
OVS added support for transient ports in v2.5.0 (Feb 2016) and
since its v2.9.0 it even installs a systemd service
(ovs-delete-transient-ports) that automatically deletes transient
ports on system startup. If we mark a port as transient then OVS
won't restore its state on restart after crash.
This change may render "--may-exist" argument redundant, but I'm
not sure about all the implications if it was removed. Let's keep
it for now.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/615
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The CCW variant of the 'vhost-user-fs' device in qemu doesn't
deliberately support the 'bootindex' attribute as the machine is unable
to boot from such device.
Reject '<boot order' on non-PCI virtiofs, add tests validating that it's
rejected as well as that virtiofs on PCI-based hosts but without address
specified will be accepted.
Resolves: https://issues.redhat.com/browse/RHEL-22728
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Pretty straightforward. Just put mem-reserve attribute whenever
it's set. Previous commit ensures it's set only for valid
controller models.
Resolves: https://issues.redhat.com/browse/RHEL-7461
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Only two controller models allow setting mem-reserve:
pcie-root-port and pci-bridge. Reflect this fact during
validation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are PCI devices with pretty large non-prefetchable memory,
for instance:
Memory at 9d800000 (64-bit, non-prefetchable) [size=8M]
Memory at a6800000 (64-bit, non-prefetchable) [size=16K]
For cold plugged devices this is not a problem, because firmware
sets PCI controllers in a way that make devices behind them just
work. Problem arises if such PCI device is to be hot plugged.
Since the PCI device wasn't present at cold boot, firmware could
not take it into calculations and the amount of reserved memory
is not sufficient.
Introduce a know that allows users overriding value computed by
FW and thus allow hot plug of such PCI devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Ages ago origCPU in domain private data was introduced to provide
backward compatibility when migrating to an old libvirt, which did not
support fetching updated CPU definition from QEMU. Thus origCPU will
contain the original CPU definition before such update. But only if the
update actually changed anything. Let's always fill origCPU with the
original definition when starting a domain so that we can rely on it
being always set, even if it matches the updated definition.
This fixes migration or save operations with custom domain XML after
commit v10.1.0-88-g14d3517410, which expected origCPU to be always set
to the CPU definition from inactive XML to check features explicitly
requested by a user.
https://issues.redhat.com/browse/RHEL-30622
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
$ virsh --connect test:///default nodedev-list
error: Failed to list node devices
error: unsupported flags (0x80000000) in function testConnectListAllNodeDevices
The test driver handles the nodedev state flags, we just need to
allow them
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The typed parameter array length must be non-NULL and either 0, or a
positive number.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only thing we need to free in the cleanup code is virCPUDef and for
that we already have g_autoptr handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of my recent commits I've chopped just too much and moved
a variable declaration into a function not realizing it's still
used on FreeBSD. Bring it back but only for the FreeBSD case.
Fixes: f8b5bd855f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
clang on Fedora started to complain about some calls to g_new0()
we're making in vbox_snapshot_conf.c. Specifically, we're passing
zero as number of elements to allocate. And while usually SA
tools are not clever, in this specific case clang is right.
There are three cases where such call is made, but all of them
later use VIR_EXPAND_N() to allocate more memory (if needed). But
VIR_EXPAND_N() accepts a variable set to NULL happily.
Therefore, just drop those three calls to g_new0(..., 0) and let
VIR_EXPAND_N() allocate memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In QEMU and LXC drivers in a few places only
virNetDevBandwidthClear() is called. This means that if an
interface is of openvswitch vport profile, its QoS is not
removed. And to make matters worse - OVS is designed to remember
state even when corresponding interface is gone. This leads to
stale QoS settings piling up in OVS database.
To resolve this, introduce virDomainInterfaceClearQoS() which
looks at given interface and calls corresponding QoS clear
function. Then, basically replace virNetDevBandwidthClear() calls
in those hypervisor drivers with this new function.
Resolves: https://issues.redhat.com/browse/RHEL-30373
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The reason virDomainClearNetBandwidth() exists in src/conf/ is
that at the time its introduction we did not have a better place.
But now we do. Firstly, virDomainClearNetBandwidth() is
hypervisor agnostic code, but really has nothing to do with
domain configuration (it doesn't parse/format XML). Secondly, in
near future it'll call another function from src/hypervisor/ and
that's not really allowed from src/conf/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The @brname argument of virNetDevOpenvswitchRemovePort() is and
was unused ever since its introduction in v0.9.11-rc1~257. Just
remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Both LXC and QEMU drivers have the same code to remove vport when
removing a domain's interface. Instead of repeating the same
pattern in both drivers, move the code into hypervisor agnostic
location (src/hypervisor/) and switch to calling this new
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The comment to virNetDevOpenvswitchInterfaceGetMaster() contains
wrong function name. Fix this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When performing an install, it's common for tooling such as virt-install
to remove the install kernel/initrd once they are successfully booted and
the domain has been redefined to boot without them. After the installation
is complete and the domain is rebooted/shutdown, the DAC and selinux
security drivers attempt to restore labels on the now deleted files. It's
harmles wrt functionality, but results in error messages such as
Mar 08 12:40:37 virtqemud[5639]: internal error: child reported (status=125): unable to stat: /var/lib/libvirt/boot/vir>
Mar 08 12:40:37 virtqemud[5639]: unable to stat: /var/lib/libvirt/boot/virtinst-yvp19moo-linux: No such file or directo>
Mar 08 12:40:37 virtqemud[5639]: Unable to run security manager transaction
Add a check for file existence to the virSecurity*RestoreFileLabel functions,
and avoid relabeling if the file is no longer available. Skipping the restore
caused failures in qemusecuritytest, which mocks stat, chown, etc as part of
ensuring the security drivers properly restore labels. virFileExists is now
mocked in qemusecuritymock.c to return true when passed a file previously
seen by the mocked stat, chown, etc functions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure the old value in `scsi_target->wwpn` is free'd before replacing it.
While at it, simplify the code.
==9104== 38 bytes in 2 blocks are definitely lost in loss record 1,943 of 3,250
==9104== at 0x483B8C0: malloc (vg_replace_malloc.c:442)
==9104== by 0x4DFB69B: g_malloc (gmem.c:130)
==9104== by 0x4E1921D: g_strdup (gstrfuncs.c:363)
==9104== by 0x495D60B: g_strdup_inline (gstrfuncs.h:321)
==9104== by 0x495D60B: virFCReadRportValue (virfcp.c:62)
==9104== by 0x4A5F5CB: virNodeDeviceGetSCSITargetCaps (node_device_conf.c:2914)
==9104== by 0xBF62529: udevProcessSCSITarget (node_device_udev.c:657)
==9104== by 0xBF62529: udevGetDeviceDetails (node_device_udev.c:1406)
==9104== by 0xBF62529: udevAddOneDevice (node_device_udev.c:1563)
==9104== by 0xBF639B5: udevProcessDeviceListEntry (node_device_udev.c:1637)
==9104== by 0xBF639B5: udevEnumerateDevices (node_device_udev.c:1691)
==9104== by 0xBF639B5: nodeStateInitializeEnumerate (node_device_udev.c:2009)
==9104== by 0x49BDBFD: virThreadHelper (virthread.c:256)
==9104== by 0x5242069: start_thread (in /usr/lib64/libc.so.6)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will allow usb-net devices to be automatically assigned a USB
address (and skip any attempt to assign a PCI one).
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 2ecdf25929 was intended to
implement two things: reduce stack usage inside ACL helpers and
minimally initialize virDomainDef object to avoid passing garbage
inside validation framework. Though original commit has not
touched other ACL helpers.
This patch adds proper clauses to
remoteRelayNetworkEventCheckACL
remoteRelayStoragePoolEventCheckACL
remoteRelayNodeDeviceEventCheckACL
remoteRelaySecretEventCheckACL
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add DMI support for risc-v and mips. Attempt to read dmidecode and
fall back to old behavior if that fails.
The SMBIOS specification[1] officially supports both RISC-V and LoongArch.
Some mips-based Loongson-3 processors also have SMBIOS.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.7.0.pdf
Signed-off-by: Brett Holman <brett.holman@canonical.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Implement display="on" and ramfb="on" for vfio PCI host devices in qemu.
This enables passthrough PCI devices for display just like we did for
mdevs.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already allow the user to specify display="on" and ramfb="on" for
mdev host devices. But newer GPU models will no longer use the mdev
framework, so we should enable this same functionality for other
non-mdev passthrough PCI devices.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test simply invokes libvirtd and expects it to fail. We can do that
directly in meson without the need for a wrapper script.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
XML metadata for snapshot contains only single list of disk overlays
from the moment when the snapshot was taken. When user creates multiple
branches of snapshots the parent snapshot will still list only the
original disk overlays. This may cause an issue in a specific scenario:
s1
|
+- s2
+- s3 (active)
For this snapshot topology when we delete s2 metadata for s1 are not
updated. Now when we delete s1 the code operated with incorrect
overlays from s1 metadata in order to update s3 metadata resulting in no
changes to s3 metadata.
Now when user tries to delete s3 it fails with following error:
error: Failed to delete snapshot s3
error: operation failed: snapshot VM disk source and parent disk source are not the same
For the actual deletion there is a code to figure out the correct disk
source but it was not used to update metadata as well. Due to reasons
how block commit in libvirt works we need to create a copy of that disk
source in order to have it available when updating metadata as the
original source will be freed at that point.
Resolves: https://issues.redhat.com/browse/RHEL-26276
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Calling this function when deleting internal snapshot isn't required
because with internal snapshots all changes are done within the file
itself so there is no file deletion and no need to update snapshot
metadata.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The PCI VPD (Vital Product Data) may be missing or the kernel can report
presence but not actually have the data. Also the data is specified by
the device vendor and thus may be invalid in some cases.
To avoid log spamming, since the only usage in the node device driver is
ignoring errors, remove all error reporting.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/607
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The VPD parsing is fragile and depends on hardware vendor's adherance to
standards. Since libvirt only ever uses this data to report it in the
nodedev XML which ignores any errors there's no much point in having
error reporting which I've added recently.
Turn the errors into VIR_DEBUG statements in preparation for upcoming
patch which completely removes the expectation to report errors.
This effectively reverts commits dfc85658bd and f85a382a0e.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the original code detected a missing or null boot index in the
new XML, it automatically added the current value. This
autocompletion was incorrect because it was impossible to
distinguish between user intent and user error - changing the
boot order itself is forbidden and should always be an error.
Resolves: https://issues.redhat.com/browse/RHEL-23416
Fixes: aa3e07caec
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Change the log level for pauses of guests due to watchdog timeouts
or io errors from debug to warn to enhance the visibility of such
events.
Signed-off-by: Lennart Fricke <lennart.fricke@drehpunkt.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement method for loongarch to get host info, such as
cpu frequency, system info, etc.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implement support for loongarch64 in the QEMU driver.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add loongarch cpu support, Define new cpu type 'loongarch64'
and implement it's driver functions.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
