Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 68b726b93c we tried to fix a mem leak. However, it
wasn't done quite well. Problem is, virNetDaemonGetServers() may
fail in which case virObjectListFreeCount() would be called with
-1 objects to free. But the number of elements is taken in
unsigned rather than signed integer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If caller of adminConnectListServers() pass NULL instead of servers we
need to free the list we've received from virNetDaemonGetServers().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It does not have a suffix ByName because there are no other means of
looking up the server and since the name is known, this should be the
preferred one.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For now it does not matter which ones we return as the code is similarly
complex, however it will fit in with other constructs in the future,
mainly when we will be able to generate dispatch helpers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
virAdm is prefix only used on the client side. Or at least for now. On
server, though, this corresponds to virNet structures (virAdmConnect is
virNetDaemon, virAdmServer should be virNetServer, in the future
virAdmClient will be resolved to virNetServerClient, and so on).
This will also make future work clearer and easier.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since servers know their name, there is no need to supply such
information twice. Also defeats inconsistencies.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At first I did not want to do this, but after trying to implement some
newer feaures in the admin API I realized we need that to make our lives
easier. On the other hand they are not saved redundantly and the
virNetServer objects are still kept in a hash table.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
remoteDispatchConnectCloseCallbackRegister introduced in
f484310a has problems. It refcounts network client object and in case of NOOP
driver operations for registering/unregistering close callback (any driver
except for vz) nobody will unref it later. As a result, client connection
will not be disposed and driver connection will not be closed.
The fix is easy. We don't need to refcount at all. We don't get a dangling
pointer because in remoteClientFreeFunc, which is called
upon disposing this network client object, we unregister the close
callback.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 1199edb1d4 added config option max_queued_clients and documented the
default value as 1000 but never actually set that value. This patch sets the
default value.
This addresses an issue whereby the following error message is reported if too
many migrations are started simultaneously:
error: End of file while reading data: Ncat: Invalid argument.: Input/output error
The problem is that too many ncat processes are spawned on the destination
system. They all attempt to connect to the libvirt socket. Because the
destination libvirtd cannot respond to the connect requests quickly enough we
overrun the socket's pending connections queue.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
When getting a list of servers registered for a daemon, it's
returned as a dynamically allocated array filled in with pointers
to constant strings. Because the array is dynamic, it should be
freed when no longer needed (but not the strings!). Even the
function that creates the array suggests that.
==19446== 48 bytes in 3 blocks are definitely lost in loss record 821 of 1,034
==19446== at 0x4C2C28E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19446== by 0x54BAFC8: virReallocN (viralloc.c:245)
==19446== by 0x54BB0BE: virExpandN (viralloc.c:294)
==19446== by 0x54BB391: virInsertElementsN (viralloc.c:436)
==19446== by 0x164E3D: virNetDaemonGetServerNames (virnetdaemon.c:217)
==19446== by 0x15616F: adminDaemonListServers (admin_server.c:52)
==19446== by 0x155B8C: adminDispatchConnectListServers (admin.c:151)
==19446== by 0x155FD8: adminDispatchConnectListServersHelper (admin_dispatch.h:101)
==19446== by 0x568E862: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==19446== by 0x568E3C3: virNetServerProgramDispatch (virnetserverprogram.c:307)
==19446== by 0x5687B5B: virNetServerProcessMsg (virnetserver.c:135)
==19446== by 0x5687C1B: virNetServerHandleJob (virnetserver.c:156)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.
Best viewed with -M.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Same as for deserializer, this method might get handy for admin one day.
The major reason for this patch is to stay consistent with idea, i.e.
when deserializer can be shared, why not serializer as well. The only
problem to be solved was that the daemon side serializer uses a code
snippet which handles sparse arrays returned by some APIs as well as
removes any string parameters that can't be returned to older clients.
This patch makes of the new virTypedParameterRemote datatype introduced
by one of the pvious patches.
Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:
struct remote_typed_param_value {
int type;
union {
int i;
u_int ui;
int64_t l;
uint64_t ul;
double d;
int b;
remote_nonnull_string s;
} remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;
struct remote_typed_param {
remote_nonnull_string field;
remote_typed_param_value value;
};
That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit b22344f328 mistakenly reordered
Default-* lines. Thanks to that I noticed that we are very inconsistent
with our init scripts, so I took the liberty of synchronizing them,
updating them and making them all look shiny and new. So apart from
fixing the LSB requirements, I also fixed the ordering, specified
runlevels and fix the link to the reference specification.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The documentation (and comment in libvirtd.conf) says that the text in
a log filter is compared to the "source file name", and gives the
example of "util/json", but this is not correct (at least not since
commit 2835c1e, possibly earlier). It is instead compared to the
string given in the VIR_LOG_INIT() macro invocation at the top of each
source file, which is always "similar to but not the same as" the
source file name (in the example above, the proper name is
"util.json", while the file name is "util/virjson.c"). This patch
corrects the misstatement in both the documentation and in
libvirtd.conf.
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
When someone does 'systemctl enable libvirtd.service' we should
also enable virtlockd.socket/virtlogd.socket, so that they can
be auto-activated if libvirtd tries to access the sockets.
Without this, people have to manually enable the units themselves
via 'systemctl enable virtdlogd.socket'.
This also ensures that if distros uses 'systemctl preset' for
enabling 'libvirtd.service', then the virtdlogd.socket gets
enabled without having to wait for the distro to update their
presets file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense. Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.
This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).
Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients. And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
When images are on mounted filesystems, there is no guarantee libvirtd
will start before they are mounted. Since we want to start after both
local and remote filesystems are mounted, we need to add both local-fs
and remote-fs as targets that should precede starting libvirtd service.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since its introduction in 2011 (particularly in commit f4324e3292),
the option doesn't work. It just effectively disables all incoming
connections. That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive. Thus, according to the server,
no client supports keepalive.
Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet. And that won't happen until after we dispatched
the ConnectOpen call.
Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
First hunk changes the use of srcdir to top_srcdir so it complies with
other rules in the Makefile. Second one removes the need of
remote_protocol.h in admin_protocol.h as it was suggested and worked in,
but this one line was missed apparently. Last one just removes the
'remote' naming from admin protocol specification, just so it's cleaner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.
Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When setting up the daemon networking, new services are created. These
services then have sockets to listen on. Once created, the service
objects are added to corresponding server object. However, during that
process, server increases reference counter of the service object. So,
at the end of the function, we should decrease it again. This way the
service objects will have only 1 reference, but that's okay since
servers are the only objects having a reference.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the admin service is disabled it would not be allocated, but the NULL
pointer still would be added to the admin server. Since
virNetServerAddService would dereference it, the daemon would crash.
Move the service registration into the block that allocates it.
So, it's a little paradox that we use the file twice. Firstly to build
libvirt-admin.la (a client side of the Admin API), then once again to
build the server side. Well, the problem is, this does not play nicely
with the distclean since the file is generated. So while it's removed
in the src/ the distclean running in daemon/ will not find the file
and fail. The file is needed because it contains the RPC wrappers. So
let's leave the client code as is and from the daemon/ just link the
client library. The linker will find desired symbols and use them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The Admin API consists of a few files on daemon side. Notably
daemon/admin_server.{ch}. While they are both on the repo, only
the .c file is mentioned in Makefile. Therefore, .h is not
distributed and 'make rpm' fails.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In latest patches we added Admin API. However, the Makefile in daemon
was missing one dependency: admin_server.c is including generated file
admin_dispatch.h. However, this dependency was not explicitly marked
in the Makefile therefore the build happened to fail on some
occasions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just one of the simplest functions that returns string "Clients: X"
where X is the number of connected clients to daemon's first
subserver (the original one), so it can be tested using virsh, ipython,
etc.
The subserver is gathered by incrementing its reference
counter (similarly to getting qemu capabilities), so there is no
deadlock with admin subserver in this API.
Here you can see how functions should be named in the client (virAdm*)
and server (adm*).
There is also a parameter @flags that must be 0, which helps testing
proper error propagation into the client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For this to pe properly separated from other protocols used by the
server, there is second server added which allows access to the whole
virNetDaemon to its clients.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is not going to be very widely used, but for some corner cases and
easier (unsafe) debugging, it might be nice.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 1882c0bd accidentally used ',' instead of ';'; oddly
enough, the result was still syntactically valid (yes, C is
a fun language). But it made me do a double take; it's better
to use idiomatic syntax.
* daemon/remote.c (remoteRelayDomainEventDeviceAdded): Fix
harmless typo.
Signed-off-by: Eric Blake <eblake@redhat.com>
Similarly to other error codes that notify the user that the object does
not exist lower the priority of VIR_ERR_NO_DOMAIN_METADATA to
VIR_LOG_DEBUG when writing the log entry.
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.
Let's finally add official support for this.
Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install
https://bugzilla.redhat.com/show_bug.cgi?id=957300
In a lot places we use path like this:
$(srcdir)/../src/....
when in fact it can be:
$(top_srcdir)/src/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the order of appearance:
* MAX_LISTEN - never used
added by 23ad665c (qemud) and addec57 (lock daemon)
* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b
* virLockError - never used, added by eb8268a4
* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
unused since the removal of ADD_ARG_LIT in d8b31306
* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e
* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7
* TEST_MODEL_WORDSIZE - unused since c25c18f7
* TEMPDIR - never used, added by 714bef5
* NSIG - workaround around old headers
added by commit 60ed1d2
unused since virExec was moved by commit 02e8691
* DO_TEST_PARSE - never used, added by 9afa006
* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb6
The fake object is used to pass the domain name and UUID to the ACL code
for events where we don't have the full domain def when dispatching
events. The rest of the entries would be left uninitialized. While this
is not a problem code-wise as the used fields are initialized it looks
ugly in the debugger.
Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
daemon/remote.c
* Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses
src/remote/remote_driver.c
* Define remoteDomainInterfaceAddresses
src/remote/remote_protocol.x
* New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
* Define structs remote_domain_ip_addr, remote_domain_interface,
remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
* Introduce upper bounds (to handle DoS attacks):
REMOTE_DOMAIN_INTERFACE_MAX = 2048
REMOTE_DOMAIN_IP_ADDR_MAX = 2048
Restrictions on the maximum number of aliases per interface were
removed after kernel v2.0, and theoretically, at present, there
are no upper limits on number of interfaces per virtual machine
and on the number of IP addresses per interface.
src/remote_protocol-structs
* New structs added
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Commit 4f25146 (v1.2.8) managed to silence Coverity, but at the
cost of a memory leak detected by valgrind:
==24129== 40 bytes in 5 blocks are definitely lost in loss record 355 of 637
==24129== at 0x4A08B1C: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24129== by 0x5084B8E: virReallocN (viralloc.c:245)
==24129== by 0x514D5AA: virDomainObjListExport (domain_conf.c:22200)
==24129== by 0x201227DB: qemuConnectListAllDomains (qemu_driver.c:18042)
==24129== by 0x51CC1B6: virConnectListAllDomains (libvirt-domain.c:6797)
==24129== by 0x14173D: remoteDispatchConnectListAllDomains (remote.c:1580)
==24129== by 0x121BE1: remoteDispatchConnectListAllDomainsHelper (remote_dispatch.h:1072)
In short, every time a client calls a ListAll variant and asks
for the resulting list, but there are 0 elements to return, we
end up leaking the 1-entry array that holds the NULL terminator.
What's worse, a read-only client can access these functions in a
tight loop to cause libvirtd to eventually run out of memory; and
this can be considered a denial of service attack against more
privileged clients. Thankfully, the leak is so small (8 bytes per
call) that you would already have some other denial of service with
any guest calling the API that frequently, so an out-of-memory
crash is unlikely enough that this did not warrant a CVE.
* daemon/remote.c (remoteDispatchConnectListAllDomains)
(remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren)
(remoteDispatchConnectListAllStoragePools)
(remoteDispatchStoragePoolListAllVolumes)
(remoteDispatchConnectListAllNetworks)
(remoteDispatchConnectListAllInterfaces)
(remoteDispatchConnectListAllNodeDevices)
(remoteDispatchConnectListAllNWFilters)
(remoteDispatchConnectListAllSecrets)
(remoteDispatchNetworkGetDHCPLeases): Plug leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
Libvirt could crash with segfault if user issue "service reload" right
after "service start". One possible way to crash libvirt is to run reload
during initialization of QEMU driver.
It could happen when qemu driver will initialize qemu_driver_lock but
don't have a time to set it's "config" and the SIGHUP arrives. The
reload handler tries to get qemu_drv->config during "virStorageAutostart"
and dereference it which ends with segfault.
Let's ignore all reload requests until all drivers are initialized. In
addition set driversInitialized before we enter virStateCleanup to
ignore reload request while we are shutting down.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179981
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
libvirtd.c: In function 'daemonSetupAccessManager':
libvirtd.c:730:18: error: declaration of 'driver' shadows
a global declaration [-Werror=shadow]
const char **driver = (const char **)config->access_drivers;
^
In file included from libvirtd.c:95:0:
../src/node_device/node_device_driver.h:43:36: error: shadowed
declaration is here [-Werror=shadow]
extern virNodeDeviceDriverStatePtr driver;
^
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since virDomainSnapshotFree will call virObjectUnref anyway, let's just use
that directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virInterfaceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNWFilterFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
We weren't ever using the value for anything other than being non-zero.
* src/util/viraudit.h (virAuditLog): Change signature.
* src/util/viraudit.c (virAuditLog): Update user.
* daemon/libvirtd.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
It would be nice to also print a params pointer and number of params in
the debug message and the previous limit for number of params in the rpc
message was too large. The 2048 params will be enough for future events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves. However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity complains that the comparison:
if (nfds && nfds > ((int)!!sock_path + (int)!!sock_path_ro))
could mean 'sock_path' is NULL. Later in virNetSocketNewListenUNIX
there's a direct dereference of path in the error path:
if (path[0] != '@')
A bit of sleuthing proves that upon entry to daemonSetupNetworking
there is no way for 'sock_path' to be NULL since daemonUnixSocketPaths
will set up 'sock_file' (although it may not set up 'sock_file_ro')
in all 3 paths.
Adjusted code to add ATTRIBUTE_NONNULL(3) on incoming path parameter and
then fixup the comparison of nfds to be a comparison against 2 or 1
depending on whether sock_path_ro is NULL or not.
With eblake's help - adjust the checks for stdinfd/stdoutfd to ensure the
values are within the range we expect; otherwise the dup2()'s and subsequent
VIR_CLOSE() calls cause Coverity to believe there's a resource leak.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In each of these cases, Coverity complains that the result count returned
on error paths would be -1 disregarding that the count and the corresponding
are "linked" together (it doesn't know that). Simple enough to check and
remove the warning
