Introduce a flag which will allow users to perform hypervisor-specific
validation when redefining the checkpoint metadata. This will allow
checking metadata which is stored e.g. in disk images when populating
the libvirt metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we don't have a consistent chain of bitmaps for the backup to proceed
we'd report VIR_ERR_INVALID_ARG error code, which makes it hard to
decide whether an incremental backup makes even sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This code will be used to signal cases when the checkpoint is broken
either during backup or other operations where a user might want to make
decision based on the presence of the checkpoint, such as do a full
backup instead of an incremental one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the docs for the '--size' flag into its own paragraph and
mention that the domain may be required to be running.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu implementation requires that the VM associated with the
checkpoint is running when checking the size. Mention this possibility
with the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function was basically open-coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a test case attempting to exercise the most of the cookie XML
parsing/formatting infra. Note that the data is not based on any real
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Migration cookie transports a lot of information but there are no tests
for it.
The test supports both xml2xml testing and also testing of the
population of the migration cookie data from a domain object, although
that option is not very useful as many things are collected from running
qemu and thus can't be tested efficiently here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testing code we don't properly populate the job sometimes. If it
isn't populated we should not touch it though in the migration cookie
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'qemu_migration_cookie' module uses these. Provide a stable override
for tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include qemu_domain.h and qemu_domainjob.h as the types from those
headers are used by this header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is compiled only when the qemu driver is enabled so we don't
need the conditional code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some completers for libvirt related tools might want to list
domain IDs only. Just like the one I've implemented for
virt-viewer [1]. I've worked around it using some awk magic,
but if it was possible to just 'virsh list --id' then I could
drop awk.
1: https://www.redhat.com/archives/virt-tools-list/2019-May/msg00014.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The virGDBusBusInit is supposed to return a reference to
requested bus type (system/session) or, if non-shared bus is
requested then create a new bus of the type. As an argument, it
gets a double pointer to GError which is passed to all g_dbus_*()
calls which allocate it on failure. Pretty standard approach.
However, since it is a double pointer we must dereference the
first level to see if the value is NULL. IOW:
if (*error)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuMigrationSrcCleanup uses qemuDomainObjDiscardAsyncJob currently. But
discard does not reduce jobs_queued counter so it leaks. Also discard does not
notify other threads that job condition is available. Discard does reset nested
job but nested job is not possible in this conditions.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As explained in the original commit (31d687a321), these values
are actually unaffected by the corresponding _without_* macros
and so we can leave out the additional processing / obfuscation.
This reverts commit ae23a87d85.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The only caller of this function ignores failure
and just sets the unique_id to -1.
Failing to read the file is likely to the device no longer
being present, not a real error.
Stop reporting errors in this function.
https://bugzilla.redhat.com/show_bug.cgi?id=1692100
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There's no much sense to test the remnants of the functions which just
NULL-check prior to handing off to g_hash_table* functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
For functions which have reasonable replacement, let's encourage usage
of g_hash_table_ alternatives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Glib's hash table provides basically the same functionality as our hash
table.
In most cases the only thing that remains in the virHash* wrappers is
NULL-checks of '@table' argument as glib's hash functions don't tolerate
NULL.
In case of iterators, we adapt the existing API of iterators to glibs to
prevent having rewrite all callers at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
We didn't use it rigorously and some helpers even cast it away. Remove
const from all hash utility functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Convert all calls to virHashForEach where it's not obvious that the
callback is _not_ deleting the current element from the hash to
virHashForEachSafe which will be deemed safe to do such operation.
Now that no iterator used with virHashForEach deletes current element we
can document that virHashForEach must not touch the hash table in any
way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
'virHashForEach' historically allowed deletion of the current element as
'virHashRemoveSet' didn't exist. To prevent us from having to deeply
analyse all iterators add virHashForEachSafe which first gets a list of
elements and iterates them outside of the hash table.
This will allow replace the internals of the hash table with other
implementation which don't allow such operation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Code which is sensitive to ordering now uses deterministic iterator
functions, so we can remove the mock override.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.
This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Iterate the hash elements sorted by key. This is useful to provide a
stable ordering such as in cases when the output is checked in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All but one of the callers either use the list in arbitrary order or
sorted by key. Rewrite the function so that it supports sorting by key
natively and make it return the element count. This in turn allows to
rewrite the only caller to sort by value internally.
This allows to remove multiple sorting functions which were sorting by
key and the function will be also later reused for some hash operations
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upcoming patch will rewrite virHashGetItems to remove the sorting
function since the prevalent mode is to order by keys.
Remove the test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The remember owner feature uses XATTRs to store original
seclabels. But that means we don't want a regular user to be able
to change what we stored and thus trick us into setting different
seclabel. Therefore, we use namespaces that are reserved to
CAP_SYS_ADMIN only. Such namespaces exist on Linux and FreeBSD.
That also means, that the whole feature is enabled only for
qemu:///system. Now, while the secdriver code is capable of
dealing with XATTRs being unsupported (it has to, not all
filesystems support them) if the feature is enabled users will
get an harmless error message in the logs and the feature
disables itself.
Since we have virSecurityXATTRNamespaceDefined() we can use it to
make a wiser decision on the default state of the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
For seclabel remembering we need to have XATTRs and a special
namespace that is accessibly to CAP_SYS_ADMIN only (we don't want
regular users to trick us into restoring to a different label).
And what qemusecuritytest does is it checks whether we have not
left any path behind with XATTRs or not restored to original
seclabel after setAll + restoreAll round trip. But it can hardly
do so if ran on a platform where there's no XATTR namespace we
can use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The qemusecuritytest checks for random domain XMLs from
qemuxml2argvdata/ whether set+restore seclabels leaves something
behind. It can be an XATTR that we forgot to remove or a file
that the owner was not restored on. But so far only DAC driver is
checked. Implement missing pieces and enable SELinux testing too.
This is done by mocking some libselinux APIs and following the
same logic used for DAC - everything is implemented in memory,
there is new hash table introduced that holds SELinux labels for
paths that were setfilecon_raw()-ed and in the end the hash table
is checked for entries that don't have the default SELinux label
(i.e. were not restored).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are three internal APIs implemented in this security_util
file: virSecurityGetRememberedLabel(),
virSecuritySetRememberedLabel() and
virSecurityMoveRememberedLabel() for getting, setting and moving
remembered seclabel. All three have a special return value of -2
when XATTRs are not supported (for whatever reason) and callers
are expected to handle it gracefully. However, after my commit of
v5.7.0-rc1~115 it may happen that one of the three functions
returned -1 even though XATTRs are not supported (and thus -2
should have been returned).
Fixes: 7cfb7aab57
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit <99d2c6519ad18651b5959fa0a3366bcb2c1e44f3> removed parameter
from the function but did not modified ATTRIBUTE_NONNULL.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This script is intended to help in synchronizing i386 QEMU cpu model
definitions with libvirt.
As the QEMU cpu model definitions are post processed by QEMU and not
meant to be consumed by third parties directly, parsing this
information is imperfect. Additionally, the libvirt models contain
information that cannot be generated from the QEMU data, preventing
fully automated usage. The output should nevertheless be helpful for
a human in determining potentially interesting changes.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The function is marked as unused. Remove it from the tree
until a new use case can be found.
Unused since: 38cc07b7bc
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When restarting libvirt services and sockets *and* libvirt-guests.service
is running, the latter will sometimes hang when trying to connect to
libvirtd. Even though libvirt-guests has 'Wants=libvirtd.service' and
'After=libvirtd.service', we can see via journalctl that it is not
shutdown before libvirtd when executing something like
systemctl try-restart libvirtd.service libvirtd.socket \
libvirtd-ro.socket virtlockd.service virtlockd.socket \
virtlogd.service virtlogd.socket virt-guest-shutdown.target
Oct 28 15:53:31 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:53:31 systemd[1]: libvirtd.service: Succeeded.
Oct 28 15:53:31 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:53:31 systemd[1]: libvirtd-admin.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: libvirtd-ro.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: libvirtd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: virtlockd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: virtlogd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
In this case, the try-restart command hung and libvirt-guests was stuck
trying to connect to libvirtd. In the following case, the try-restart
worked since libvirtd was started again before libvirt-guests was stopped!
Oct 28 15:19:02 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:19:02 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Starting Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Virtualization daemon.
Oct 28 15:19:02 libvirt-guests.sh[4912]: Running guests on default URI: no running guests.
Oct 28 15:19:02 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:19:02 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Adding 'Requires=libvirtd.service' to virt-guest-shutdown.target results
in expected behavior
Oct 28 15:40:00 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 libvirt-guests.sh[5245]: Running guests on default URI: no running guests.
Oct 28 15:40:00 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:40:00 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Starting Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Started Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Make use of g_autofree
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Refactor mdev_types into standalone define for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move XML formatting code into a new method.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract PCI code from virNodeDevPCICapMdevTypesParseXML to make
method virNodeDevCapMdevTypesParseXML generic for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Extract the XML formatting for mdev_types from PCI capability into
a generic standalone method for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extracting PCI from virNodeDeviceGetPCIMdevTypesCaps creating
virNodeDeviceGetMdevTypesCaps to make later reuse possible.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove mix of array length and error code in the return code.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
