Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
Except LXC and UML driver, implementations of all other drivers
simply return 0, because these drivers doesn't have config both
in memory and on disk, no need to track if the domain of these
drivers updated or not.
Rename "xenUnifiedDomainisPersistent" to "xenUnifiedDomainIsPersistent"
* esx/esx_driver.c
* lxc/lxc_driver.c
* opennebula/one_driver.c
* openvz/openvz_driver.c
* phyp/phyp_driver.c
* test/test_driver.c
* uml/uml_driver.c
* vbox/vbox_tmpl.c
* xen/xen_driver.c
* xenapi/xenapi_driver.c
Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().
Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()< 0 check and I converted those to
VIR_FCLOSE()< 0.
I did not find occurrences of possible double-closed files on the way.
Introduce implementations of the virDomainOpenConsole() API
for LXC, Xen and UML drivers.
* src/lxc/lxc_driver.c, src/lxc/lxc_driver.c,
src/xen/xen_driver.c: Wire up virDomainOpenConsole
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API. On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.
* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
According to API documentation virDomain{At,De}tachDevice calls are
supposed to only work on active guests for device hotplug. For anything
beyond that, their *Flags variants have to be used.
Despite the variant which was acked on libvirt mailing list
(https://www.redhat.com/archives/libvir-list/2010-January/msg00385.html)
commit ed9c14a7ef (by Jim Fehlig)
introduced automagic behavior of these API calls for xen driver. Since
January, these calls always change persistent configuration of a guest
and if the guest is currently active, they also hot(un)plug the device.
That change didn't follow API documentation and also broke device
hot(un)plug for older xend implementations which do not support changing
persistent configuration of a guest and hot(un)plugging in one step.
This patch should not break anything for active guests. On the other
hand, changing inactive guests is not supported any more.
Doing `virsh schedinfo rhel5u3 --cap 65535' the hypervisor does the
call, but does not change the value nor raise an error. Best is just to
consider it's not in the allowed values. The problem is that the error
won't be output since the xend driver will then be called and raise an
error
error: this function is not supported by the hypervisor: unsupported
in xendConfigVersion < 4
which will override the useful information from
xenUnifiedDomainSetSchedulerParameters(). So best is to also invert the
order in which the xen sub-drivers are called.
* src/xen/xen_hypervisor.c: mark 65535 cap value as out of bound
* src/xen/xen_hypervisor.c: reverse the order of the calls to the xen
sub drivers to get the error message if needed
This fixes a leak described in
https://bugzilla.redhat.com/show_bug.cgi?id=590073
xenUnifiedDomainInfoList has a pointer to a list of pointers to
xenUnifiedDomain. We were freeing up all the domains, but neglecting
to free the list.
This was found by Paolo Bonzini <pbonzini@redhat.com>.
When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment. The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host. So the
current logic will reset host devices.
Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.
* src/util/pci.h: change signature of pciResetDevice to add an
inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach. This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands. Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This defines the internal driver API and stubs out each driver
* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
git grep found 12 of the former but 100 of the latter in src/.
* src/remote/remote_driver.c (initialise_gnutls): Rename...
(initialize_gnutls): ...to this.
(doRemoteOpen): Adjust caller.
* src/xen/xen_driver.c (xenUnifiedOpen): Adjust output string.
* src/util/network.c: Adjust comments.
Suggested by Matthias Bolte.
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
To allow the new virDomainUpdateDeviceFlags() API to be universally
used with all drivers, this patch adds an impl to all the current
drivers which support CDROM or Floppy disk media change via the
current virDomainAttachDeviceFlags API
* src/qemu/qemu_driver.c, src/vbox/vbox_tmpl.c,
src/xen/proxy_internal.c, src/xen/xen_driver.c,
src/xen/xend_internal.c: Implement media change via the
virDomainUpdateDeviceFlags API
* src/xen/xen_driver.h, src/xen/xen_hypervisor.c,
src/xen/xen_inotify.c, src/xen/xm_internal.c,
src/xen/xs_internal.c: Stubs for Xen driver entry points
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
The libvirtd daemon impl will need to switch over to using the
new event APIs. To make this simpler, ensure all drivers currently
providing events support both the new APIs and old APIs.
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Implement the new
virConnectDomainEvent(Dereg|Reg)isterAny driver entry points
The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.
* The signature of virDomainEventDispatchFunc changes to use
virConnectDomainEventGenericCallback instead of the lifecycle
event specific virConnectDomainEventCallback
* Every registered callback gains a unique ID to allow its
removal based on ID, instead of function pointer
* Every registered callback gains an 'eventID' to allow callbacks
for different types of events to be distinguished
* virDomainEventDispatch is adapted to filter out callbacks
whose eventID does not match the eventID of the event being
dispatched
* virDomainEventDispatch is adapted to filter based on the
domain name and uuid, if this filter is set for a callback.
* virDomainEvent type/detail fields are moved into a union to
allow different data fields for other types of events to be
added later
* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/xen/xen_driver.c: Change dispatch function signature
to use virConnectDomainEventGenericCallback
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
This provides the internal glue for the driver API
* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out entry points
The internal glue layer for the new pubic API
* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub new entry point
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
