When we parse <mac address="00:00:00:00:00:00"/> we keep that in memory
and pass it down to the hypervisor. However, that MAC address is not
strictly valid as it is not marked as locally administered (bit 0x02)
but it is not even globally unique. It is also used for loopback device
on Linux, for example. And QEMU sees such MAC address just as "not
specified" and generates a new one that libvirt does not even know
about. So to make the overall experience better we now generate it if
the supplied one is all clear.
Resolves: https://issues.redhat.com/browse/RHEL-974
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They represent nanoseconds, and we accept such values already. Not that
anyone would use such values in the wild, but even one person testing
QEMU could put in a bigger value and will be bothered with validation
errors after every `virsh edit`. Also add a test for it.
Resolves: https://issues.redhat.com/browse/RHEL-1717
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The formatter for the backup job data didn't pass the virDomainXMLOption
struct to the disk formatter which meant that the private data of the
disk source were not formatted.
This didn't pose a problem for now as the blockjob list remembered the
nodenames for the jobs, but the backup source lost them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt assumes that a SCSI bus can fit up to 8 devices
(including controller itself), except for so called wide bus
which can accommodate up to 16 devices (again, including
controller). This plays important role when computing 'drive'
address in virDomainDiskDefAssignAddress(). So far, the only
driver that enables wide SCSI bus is VMX. But with newer
releases, ESX is capable of "super wide" bus (64 devices).
We can blindly bump the limit in our code because then we would
compute address that's invalid for older ESX versions that we
still want to support.
Unfortunately, I haven't found a better place where to store this
than virDomainDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I have added 2 new macros to call tests which are expected to
fail in order to make the code more consistent and readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having negation in a name of a bool variable seems a bit
confusing to me. I think the substitution makes the code much
more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
I changed DO_TEST_DIFFERENT to DO_TEST, which allows us to remove
the duplicate out file. I also added id attribute for domain
element in order to parse it as a live XML ('cachetune id' is in
the output of only live XMLs). Lastly I added id of cachetune to
test its output value.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is present no XML test coverage for this.
Add genericxml parse + formatting coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Call the post-processing function so that we can validate that it does
the correct thing.
virDomainBackupAlignDisks requires disk definitions to be present so
let's fake them by copying disks from the backup definition and add one
extra disk 'vdextradisk'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are few internal fields of the backup XML. Propagate the
'internal' flag so that the test can verify the XML infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add the appropriate entries into the schema to allow encryption of the
backup or scratch image. Since we use blockdev internals for everything
no changes to the code are actually necessary.
https://bugzilla.redhat.com/show_bug.cgi?id=1811906
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Following domain configuration changes create two memory bandwidth
monitors: one is monitoring the bandwidth consumed by vCPU 0,
another is for vCPU 5.
```
<cputune>
<memorytune vcpus='0-4'>
<node id='0' bandwidth='20'/>
<node id='1' bandwidth='30'/>
+ <monitor vcpus='0'/>
</memorytune>
+ <memorytune vcpus='5'>
+ <monitor vcpus='5'/>
+ </memorytune>
</cputune>
```
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Originally, inside <cputune/cachetune>, it requires the <cache> element to
be in the position before <monitor>, and following configuration is not
permitted by schema, but it is better to let it be valid.
<cputune>
<cachetune vcpus='0-1'>
<monitor level='3' vcpus='0-1'/>
^
|__ Not permitted originally because it is in the place
before <cache> element.
<cache id='0' level='3' type='both' size='3' unit='MiB'/>
<cache id='1' level='3' type='both' size='3' unit='MiB'/>
</cachetune>
...
</cputune>
And, let schema do more strict check by identifying following configuration to
be invalid, due to <cachetune> should contain at least one <cache> or <monitor>
element.
<cputune>
<cachetune vcpus='0-1'>
^
|__ a <cachetune> SHOULD contain at least one <cache> or <monitor>
</cachetune>
...
</cputune>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Now that the parser and formatter are in place we can exercise it on
the test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introducing <monitor> element under <cachetune> to represent
a cache monitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a new section memorytune to support memory bandwidth allocation.
This is consistent with existing cachetune. As the example:
below:
<cputune>
......
<memorytune vcpus='0'>
<node id='0' bandwidth='30'/>
</memorytune>
</cputune>
vpus --- vpus subjected to this memory bandwidth.
id --- on which node memory bandwidth to be set.
bandwidth --- the memory bandwidth percent to set.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The launch-security element can be used to define the security
model to use when launching a domain. Currently we support 'sev'.
When 'sev' is used, the VM will be launched with AMD SEV feature enabled.
SEV feature supports running encrypted VM under the control of KVM.
Encrypted VMs have their pages (code and data) secured such that only the
guest itself has access to the unencrypted version. Each encrypted VM is
associated with a unique encryption key; if its data is accessed to a
different entity using a different key the encrypted guests data will be
incorrectly decrypted, leading to unintelligible data.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
TSEG (Top of Memory Segment) is one of many regions that SMM (System Management
Mode) can occupy. This one, however is special, because a) most of the SMM code
lives in TSEG nowadays and b) QEMU just (well, some time ago) added support for
so called 'extended' TSEG. The difference to the TSEG implemented in real q35's
MCH (Memory Controller Hub) is that it can offer one extra size to the guest OS
apart from the standard TSEG's 1, 2, and 8 MiB and that size can be selected in
1 MiB increments. Maximum may vary based on QEMU and is way too big, so we
don't need to check for the maximum here. Similarly to the memory size we'll
leave it to the hypervisor to try satisfying that and giving us an error message
in case it is not possible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Cachetune for unavailable vCPUs should be cleared the same way vcpupin and other
things do, so let's add tests for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
More info in the documentation, this is basically the XML parsing/formatting
support, schemas, tests and documentation for the new cputune/cachetune element
that will get used by following patches.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There's no reason for the files to have generic- prefix
since they all live under genericxml2xmlindata and
genericxml2xmloutdata directories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently we accept and correctly parse this chardev XML:
...
<channel type='tcp'>
<source mode='connect'/>
<source mode='bind' host='localhost'/>
<source service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
The parsed formatted XML is:
...
<channel type='tcp'>
<source mode='connect' host='localhost' service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
That behavior is super wrong and should not be allowed. If you notice
the current parse takes the first found attribute and uses that value,
so for example from the "<source mode='bind' host='localhost'/>" only
the "host" attribute is used. It works the same way for all possible
attributes that we are able to parse for source element.
This patch enforces providing only one source element for all character
devices, only for UDP type we allow to provide two source elements
since you can specify both modes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch introduces
<cache level='N' mode='emulate'/>
<cache mode='passthrough'/>
<cache mode='disable'/>
sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The issue is that if this graphics definition is provided:
<graphics type='vnc' port='0'/>
it's parsed as:
<graphics type='vnc' autoport='no'>
<listen type='address'/>
</graphics>
but if the resulting XML is parsed again the output is:
<graphics type='vnc' port='-1' autoport='yes'>
<listen type='address'/>
</graphics>
and this should not happen. The XML have to always remain the same
after it was already parsed by libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1383039
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Individual vCPU hotplug requires us to track the state of any vCPU. To
allow this add the following XML:
<domain>
...
<vcpu current='2'>3</vcpu>
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
<vcpu id='1' enabled='yes' hotpluggable='yes' order='2'/>
<vcpu id='1' enabled='no' hotpluggable='yes'/>
</vcpus>
...
The 'enabled' attribute allows to control the state of the vcpu.
'hotpluggable' controls whether given vcpu can be hotplugged and 'order'
allows to specify the order to add the vcpus.
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
