Starting with QEMU-6.2 started accepting a JSON object as argument for
'-device' which will also become the only syntax considered stable by
qemu in the future.
Since libvirt was recently converted to generate the properties via JSON
to begin wit we can start using it on the commandline as well, by simply
enabling the QEMU_CAPS_DEVICE_JSON capability, which we do by probing
for the 'json-cli' feature flag of 'device_add'.
Normally a change which changes a commandline output should be happening
only after the impacted real-caps test files are forked in the version
preceding the change, but in this case it's not necessary as the logic
for generating the device properties stays identical and we just change
the output format (avoid conversion). Additionally we still have a lot
of tests validating the conversion to the old commandline options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two variables (@vm and @domflags) in qemuConnectGetAllDomainStats()
that are used only within the for() loop but declared for entire function.
Bring them into the loop to make it obvious they are not used outside of it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
By this commit, qemu domain stats will check capabilities requirements before issuing actual query.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of qemuDomainGetStatsWorkers requires capabilities to run.
This commit adds capability information to qemuDomainGetStatsWorkers.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
In this commit, add capability flag for query-dirty-rate first.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There have been countless reports from users concerned about the following
error reported by libvirtd when qemu domains are shutdown
internal error: End of file from qemu monitor
While the error is harmless, users often mistaken it for real problem with
their deployments. EOF from the monitor can't be entirely ignored since
other threads may be using the monitor and must be able to detect the EOF
condition.
One potential fix is to delay reporting EOF until the monitor is used
after EOF is detected. This patch adds a 'goteof' member to the
qemuMonitor structure, which is set when EOF is detected on the monitor
socket. If another thread later tries to send data on the monitor, the
EOF error is reported.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit ad209e7d adds QEMU_CAPS_VIRTIO_BLK_QUEUE_SIZE capability, but
the following commit 2d6d67e1 missed to use it and uses
QEMU_CAPS_VIRTIO_BLK_NUM_QUEUES instead.
This commit fixes the mistake.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We did not set priv->migMaxBandwidth if '--bandwidth' was
specified as an option in the 'migrate' virsh command. This
caused in printing the wrong value if virsh command
'migrate-getspeed' was called during the migration. This patch
first sets the value to the given bandwidth (if one was
specified) and restores the previous value after the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1806856
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
QEMU declares the bootindex types as:
bootindexA=<int32>
bootindexB=<int32>
The driveA/driveB parameters were deprecated and removed in qemu-6.0.
We'll keep them for compatibility, but they are not used with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildFloppyCommandLineControllerOptions was generating config for
both the implicit and explicit fdc. The explicit FDC is using '-device'
and thus will need to be converted to JSON.
Split up the lookup of the floppy drive configs from the actual command
generation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the props we control as:
'ccid-card-emulated'
backend=<str>
cert1=<str>
cert2=<str>
cert3=<str>
db=<str>
'ccid-card-passthru'
chardev=<str> - ID of a chardev to use as a backend
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While this device doesn't have any properties it must be converted to
use qemuBuildDeviceCommandlineFromJSON so that we can validate it in the
future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the 'guid' property as:
guid=<str> - UUID (aka GUID) or "auto" for random value (default) (default: "auto")
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it into the validator. Note that the placement into the device
validation part is intentional so that it also covers hotplug code
paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a commonly used helper virDomainControllerAliasFind, which does
the same thing and also reports errors internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virXMLPropEnum' to parse it and fix all switch statements which
didn't include the VIR_DOMAIN_SMARTCARD_TYPE_LAST case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't check the type twice, move the chardev validation into the
switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the code was converted to use this helper we can remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
../../work/libvirt/src/qemu/qemu_hotplug.c: In function ‘qemuDomainAttachFSDevice’:
../../work/libvirt/src/qemu/qemu_hotplug.c:3458:68: error: ordered comparison of pointer with integer zero [-Werror=extra]
3458 | if (qemuBuildVHostUserFsDevProps(fs, vm->def, charAlias, priv) < 0)
| ^
cc1: all warnings being treated as errors
Fixes: b98787303498cfb8426ab27ee62247b164101242
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This reverts commit b164eac5e1d4ebe17e673f0427b70f862a670f94
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Do not depend on passing a logManager. Create a new connection.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We control only the 'tpmdev' property of TPM devices which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The codec devices have the following properties we control:
cad=<uint32> - (default: 4294967295)
audiodev=<str> - ID of an audiodev to use as a backend
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sound devices have only the 'audiodev' property which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All virtio devices were converted to the new JSON formatter so we can
remove the old one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We control the following properties of the devices in question:
'virtio-gpu'
virgl=<bool> - on/off (default: true)
'qxl'
ram_size=<uint32> - (default: 67108864)
vram_size=<uint64> - (default: 67108864)
vram64_size_mb=<uint32> - (default: 4294967295)
vgamem_mb=<uint32> - (default: 16)
max_outputs=<uint16> - (default: 0)
'vhost-user-gpu'
max_outputs=<uint32> - (default: 1)
chardev=<string>
'VGA'
vgamem_mb=<uint32> - (default: 16)
'bochs-display'
vgamem=<size> - (default: 16777216)
common for all devices:
xres=<uint32> - (default: 0)
yres=<uint32> - (default: 0)
The only noticable change is using memory size in bytes for
'bochs-display' instead of kibibytes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'vhost-user-fs-pci' has following properties we control:
chardev=<str> - ID of a chardev to use as a backend
queue-size=<uint16> - (default: 128)
tag=<str>
bootindex=<int32>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old-style 'device_add' helpers which parse the commandline
arguments to JSON since we now coverted all usage to use JSON directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build the properties of 'vhost-vsock' device via JSON. In comparison to
previous similar refactors this also modifies the hotplug code to attach
the vhost fd handle explicitly rather than using
'qemuMonitorAddDeviceWithFd'.
The properties of vhost-vsock have the following types according to
QEMU:
guest-cid=<uint64> - (default: 0)
vhostfd=<str>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build the properties of 'vhost-scsi' device via JSON. In comparison to
previous similar refactors this also modifies the hotplug code to attach
the vhost fd handle explicitly rather than using
'qemuMonitorAddDeviceWithFd'.
The 'vhost-scsi' device doesn't have any special (non-string) properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build commandlines for character devices via JSON.
For devices using 'VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL' address
type 'qemuBuildDeviceAddressProps' will now generate the address. The
only special property is 'nr'. QEMU declares it as:
nr=<uint32> - (default: 4294967295)
The test fallout is caused by formatting addresses as decimal numbers
instead of hex as described in the commit which added
'qemuBuildDeviceAddressProps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The handlers for PCI, SCSI and USB controllers already use JSON
internally. This patch converts 'virtio-serial', 'ccid' and 'sata' to do
the same and passes out the JSON directly so that it can be used in
monitor code to avoid conversion.
From the controllers converted in this patch only 'virtio-serial' has
special properties. QEMU thinks they have the following types:
max_ports=<uint32> - (default: 31)
vectors=<uint32> - (default: 2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the PCI controller properties into JSON, but convert
it back to a string as preparation for upcoming refactors.
The following types are declared for the properties we use by QEMU:
'nec-usb-xhci'
p2=<uint32> - (default: 4)
p3=<uint32> - (default: 4)
'ich9-usb-uhci6'
masterbus=<str>
firstport=<uint32> - (default: 0)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the validation code into a separate function. For now the
validation is still kept in the commandline format step as simply just
moving it to the validator causes failures in the test suite, which will
need to be investigated deeper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the PCI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'port' field for various PCI
controllers is expected to be a number and thus can't be represented as
a hexadecimal value in JSON.
QEMU expects the following types:
'pci-bridge'
chassis_nr=<uint8> - (default: 0)
'pxb-pcie':
bus_nr=<uint8> - (default: 0)
'pcie-root-port'
port=<uint8> - (default: 0)
chassis=<uint8> - (default: 0)
hotplug=<bool> - (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the SCSI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'reg' field for a spapr-vio
address is expected to be a number:
$ qemu-system-ppc64 -device spapr-vscsi,help
spapr-vscsi options:
reg=<uint32> - (default: 4294967295)
The hand-rolled generator used hex representation but that will not be
possible on the monitor via JSON.
The properties of 'virtio-scsi' have following types according to QEMU:
iothread=<link<iothread>>
num_queues=<uint32> - (default: 4294967295)
cmd_per_lun=<uint32> - (default: 128)
max_sectors=<uint32> - (default: 65535)
ioeventfd=<bool> - on/off (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into a new function called qemuBuildControllerPCIDevStr
so that the code is self contained and the original function easier to
follow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
