Commit Graph

339 Commits

Author SHA1 Message Date
Eric Blake
981d2cdab4 maint: improve i18n on non-Linux
Per the gettext developer:
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00019.html
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00021.html

gettext() doesn't work correctly on all platforms unless you have
called setlocale().  Furthermore, gnulib's gettext.h has provisions
for setting up a default locale, which is the preferred method for
libraries to use gettext without having to call textdomain() and
override the main program's default domain (virInitialize already
calls bindtextdomain(), but this is insufficient without the
setlocale() added in this patch; and a redundant bindtextdomain()
in this patch doesn't hurt, but serves as a good example for other
packages that need to bind a second translation domain).

This patch is needed to silence a new gnulib 'make syntax-check'
rule in the next patch.

* daemon/libvirtd.c (main): Setup locale and gettext.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/parthelper.c (main): Likewise.
* tools/virsh.c (main): Fix exit status.
* src/internal.h (DEFAULT_TEXT_DOMAIN): Define, for gettext.h.
(_): Simplify definition accordingly.
* po/POTFILES.in: Add src/storage/parthelper.c.
2010-11-17 10:12:57 -07:00
Daniel P. Berrange
7c08fcc439 Add a generic internal API for handling any FD based stream
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback

The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O

* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
  VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
  generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
  src/libvirt_private.syms: Generic reusable FD based streams
2010-11-11 16:02:57 +00:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel Veillard
778c0976c0 Add a sysinfo util module and read host info API
Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode

* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
  src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
  error code for that module
* po/POTFILES.in: add new file for translations
2010-11-08 15:14:50 +01:00
Matthias Bolte
f4a8542dd5 vbox: Stop hardcoding a single path for VBoxXPCOMC.so
This partly reverts df90ca7661.

Don't disable the VirtualBox driver when configure can't find
VBoxXPCOMC.so, rely on detection at runtime again instead.

Keep --with-vbox=/path/to/virtualbox intact, added to for:
https://bugzilla.redhat.com/show_bug.cgi?id=609185

Detection order for VBoxXPCOMC.so:

1. VBOX_APP_HOME environment variable
2. configure provided location
3. hardcoded list of known locations
4. dynamic linker search path

Also cleanup the glue code and improve error reporting.
2010-10-29 15:50:38 +02:00
Daniel P. Berrange
090404acfe Convert virNetwork to use virSocketAddr everywhere
Instead of storing the IP address string in virNetwork related
structs, store the parsed virSocketAddr. This will make it
easier to add IPv6 support in the future, by letting driver
code directly check what address family is present

* src/conf/network_conf.c, src/conf/network_conf.h,
  src/network/bridge_driver.c: Convert to use virSocketAddr
  in virNetwork, instead of char *.
* src/util/bridge.c, src/util/bridge.h,
  src/util/dnsmasq.c, src/util/dnsmasq.h,
  src/util/iptables.c, src/util/iptables.h: Convert to
  take a virSocketAddr instead of char * for any IP
  address parameters
* src/util/network.h: Add macros to determine if an address
  is set, and what address family is set.
2010-10-22 12:07:02 +01:00
Daniel P. Berrange
497adba2d4 Expand virSocketFormat to be more flexible
The getnameinfo() function is more flexible than inet_ntop()
avoiding the need to if/else the code based on socket family.
Also make it support UNIX socket addrs and allow inclusion
of a port (service) address. Finally do proper error reporting
via normal APIs.

* src/conf/domain_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c,
  src/qemu/qemu_conf.c: Fix error handling with virSocketFormat
* src/util/network.c: Rewrite virSocketFormat to use getnameinfo
  and cope with UNIX socket addrs.
2010-10-22 11:24:12 +01:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Ryota Ozaki
938f2dbd9e lxc: Fix return values of veth.c functions
Previously, the functions in src/lxc/veth.c could sometimes return
positive values on failure rather than -1. This made accurate error
reporting difficult, and led to one failure to catch an error in a
calling function.

This patch makes all the functions in veth.c consistently return 0 on
success, and -1 on failure. It also fixes up the callers to the veth.c
functions where necessary.

Note that this patch may be related to the bug:

  https://bugzilla.redhat.com/show_bug.cgi?id=607496.

It will not fix the bug, but should unveil what happens.

* po/POTFILES.in - add veth.c, which previously had no translatable strings
* src/lxc/lxc_controller.c
* src/lxc/lxc_container.c
* src/lxc/lxc_driver.c    - fixup callers to veth.c, and remove error logs,
                            as they are now done in veth.c
* src/lxc/veth.c - make all functions consistently return -1 on error.
* src/lxc/veth.h - use ATTRIBUTE_NONNULL to protect against NULL args.
2010-07-29 14:08:35 -04:00
Matthias Bolte
ddb4ae0ca9 esx: Add read-only storage pool access
Allows listing existing pools and requesting information about them.

Alter the esxVI_ProductVersion enum in a way that allows to check for
product type by masking.
2010-05-26 12:01:27 +02:00
Daniel P. Berrange
60881161ea Expose a host UUID in the capabilities XML
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test
2010-05-25 17:09:18 +01:00
Jim Meyering
b8ed797c7c maint: update po/POTFILES.in
* po/POTFILES.in: Add 3 files.
2010-05-20 21:36:26 +02:00
Jim Meyering
acd981e37f maint: more VIR_WARN corrections: now manually
* po/POTFILES.in: Remove src/util/logging.c and src/util/uuid.c.
* src/phyp/phyp_driver.c (phypUUIDTable_ReadFile): Correct more
VIR_WARN uses, now manually.
(phypUUIDTable_Init, phypUUIDTable_Pull): Likewise.
2010-05-19 13:03:35 +02:00
Satoru SATOH
51d203c676 Add build support for dnsmasq module
* po/POTFILES.in: the new module contains translatable strings
* src/Makefile.am: include the files in the utils set
* src/libvirt_private.syms: exports the symbols internally
2010-04-26 17:20:02 +02:00
Jiri Denemark
39f3fee4a4 Mark internal.h for translation 2010-04-16 19:21:10 +02:00
Stefan Berger
5174b02fb9 Consolidate interface related functions in interface.c
Changes from v1 to v2:
- changed function name prefixes to 'iface' from previous 'Iface'

- Further to make make syntax-check pass:
 - indentation fix in interface.h
 - added entry to POTFILES.in

I am consolidating network interface related functions used in nwfilter
and macvtap code in utils/interface.c. All function names are prefixed
with 'Iface'. The following functions are now available through
interface.h:

int ifaceCtrl(const char *name, bool up);
int ifaceUp(const char *name);
int ifaceDown(const char *name);

int ifaceCheck(bool reportError, const char *ifname,
               const unsigned char *macaddr, int ifindex);

int ifaceGetIndex(bool reportError, const char *ifname, int *ifindex);

I added 'int ifindex' as parameter to ifaceCheck to the original
function and modified the code accordingly.
2010-04-13 10:57:11 -04:00
Daniel P. Berrange
df62337289 Add missing nwfilter_learnipaddr.c to POTFILES.in
* po/POTFILES.in: Add src/nwfilter/nwfilter_learnipaddr.c
2010-04-08 12:01:57 +01:00
Matthias Bolte
028db0bf5d esx: Mark error messages for translation
Also define ESX_ERROR and ESX_VI_ERROR in a central place, instead of
defining them in each source file.

Add ESX_ERROR and ESX_VI_ERROR to the msg_gen_function list in cfg.mk.

Update po/POTFILES.in accordingly.
2010-04-06 19:24:24 +02:00
Jim Meyering
00195f9f8d maint: mark xenapiSessionErrorHandler messages for translation
* cfg.mk (msg_gen_function): Add xenapiSessionErrorHandler.
* po/POTFILES.in: Add src/xenapi/xenapi_driver.c
* src/xenapi/xenapi_driver.c: Mark strings for translation.
* src/xenapi/xenapi_utils.c (xenapiUtil_ParseQuery):
2010-03-31 16:30:41 +02:00
Daniel Veillard
2b4e353168 Add hook utilities
This exports 3 basic routines:
  - virHookInitialize() initializing the hook support by looking for
    scripts availability
  - virHookPresent() used to test if there is a hook for a given driver
  - virHookCall() which actually calls a synchronous script hook with
    the needed parameters
Note that this doesn't expose any public API except for the locations
and arguments passed to the scripts

* src/Makefile.am: add the 2 new files
* src/util/hooks.h src/util/hooks.c: implements the 3 functions
* src/libvirt_private.syms: export the 3 symbols internally
* po/POTFILES.in: add src/util/hooks.c to translatables modules
2010-03-29 18:21:04 +02:00
Stefan Berger
065b6571bf Core driver implementation with ebtables support
This patch implements the core driver and provides
- management functionality for managing the filter XMLs
- compiling the internal filter representation into ebtables rules
- applying ebtables rules on a network (tap,macvtap) interface
- tearing down ebtables rules that were applied on behalf of an
interface
- updating of filters while VMs are running and causing the firewalls to
be rebuilt
- other bits and pieces

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-03-26 18:01:16 +00:00
Stefan Berger
e4e20423ff Add XML parser extensions for network filtering
This patch adds XML processing for the network filter schema
and extends the domain XML processing to parse the top level
referenced filter along with potentially provided parameters

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
2010-03-26 18:01:16 +00:00
Matthias Bolte
3cdc4cb613 esx: Move username and password helper functions to authhelper.c 2010-03-16 20:15:32 +01:00
Jim Meyering
a31bc67503 fix two "make syntax check" failures
* src/xenapi/xenapi_driver.c (xenapiOpen): Remove useless-if-before-free.
* po/POTFILES.in: Add src/xenapi/xenapi_utils.c.
2010-03-16 19:32:05 +01:00
Stefan Berger
315baab944 macvtap support for libvirt -- helper code
This part adds the helper code to setup and tear down macvtap devices
using direct communication with the device driver via netlink sockets.
The rather short messages received from the netlink layer are now
written into a dynamically allocated buffer

* src/util/macvtap.h src/util/macvtap.c: provides the new module
* po/POTFILES.in: the module contains translated strings
2010-02-15 17:47:29 +01:00
Jiri Denemark
796840d2f0 Add cpu_generic.c to the list of translated files
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-02-11 16:46:20 +01:00
Matthias Bolte
0a5befc4c0 Remove conn parameter from Linux stats functions
It was used for error reporting only.
2010-02-09 01:04:55 +01:00
Daniel P. Berrange
15f5eaa098 Introduce a new DAC security driver for QEMU
This new security driver is responsible for managing UID/GID changes
to the QEMU process, and any files/disks/devices assigned to it.

* qemu/qemu_conf.h: Add flag for disabling automatic file permission
  changes
* qemu/qemu_security_dac.h, qemu/qemu_security_dac.c: New DAC driver
  for QEMU guests
* Makefile.am: Add new files
2010-01-21 14:00:16 +00:00
Cole Robinson
5073aa994a Implement path lookup for USB by vendor:product
Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.

This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)

[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450
2010-01-13 15:24:41 -05:00
Cole Robinson
a3dddc0020 events: Report errors on failure 2010-01-13 14:24:07 -05:00
Jiri Denemark
7286882c34 Adds CPU selection infrastructure
Each driver supporting CPU selection must fill in host CPU capabilities.
When filling them, drivers for hypervisors running on the same node as
libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers,
such as VMware, need to implement their own way of getting such data.
Raw data can be decoded into virCPUDefPtr using cpuDecode() function.

When implementing virConnectCompareCPU(), a hypervisor driver can just
call cpuCompareXML() function with host CPU capabilities.

For each guest for which a driver supports selecting CPU models, it must
set the appropriate feature in guest's capabilities:

    virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0)

Actions needed when a domain is being created depend on whether the
hypervisor understands raw CPU data (currently CPUID for i686, x86_64
architectures) or symbolic names has to be used.

Typical use by hypervisors which prefer CPUID (such as VMware and Xen):

- convert guest CPU configuration from domain's XML into a set of raw
  data structures each representing one of the feature policies:

    cpuEncode(conn, architecture, guest_cpu_config,
              &forced_data, &required_data, &optional_data,
              &disabled_data, &forbidden_data)

- create a mask or whatever the hypervisor expects to see and pass it
  to the hypervisor

Typical use by hypervisors with symbolic model names (such as QEMU):

- get raw CPU data for a computed guest CPU:

    cpuGuestData(conn, host_cpu, guest_cpu_config, &data)

- decode raw data into virCPUDefPtr with a possible restriction on
  allowed model names:

    cpuDecode(conn, guest, data, n_allowed_models, allowed_models)

- pass guest->model and guest->features to the hypervisor

* src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c
  src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h
  src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h
* configure.in: check for CPUID instruction
* src/Makefile.am: glue the new files in
* src/libvirt_private.syms: add new private symbols
* po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 16:13:45 +01:00
Daniel Veillard
c7c42a85b9 Fixes syntax-check with previous commit
* po/POTFILES.in: adds src/conf/cpu_conf.c in teh set of files with
  translatable content
* src/conf/cpu_conf.c: remove an unused include
2009-12-18 14:50:04 +01:00
Daniel Veillard
0c3fb8d41c Fix 'make syntax-check' after iptables.c cleanup 2009-12-11 10:09:26 +01:00
Daniel P. Berrange
3a4f172fdd Support for JSON mode monitor
Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
2009-12-08 13:46:54 +00:00
Daniel P. Berrange
9428f2ced6 Introduce a simple API for handling JSON data
This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc).  There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.

This uses the YAJL library for parsing/formatting from

 http://lloyd.github.com/yajl/

* src/util/json.h, src/util/json.c: Data structures and APIs
  for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers
2009-12-07 14:14:36 +00:00
Daniel P. Berrange
37f415da42 Pull schedular affinity code out into a separate module
* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers
2009-11-23 11:58:13 +00:00
David Allan
3ad6dcf3dc Implement a node device backend using libudev
* configure.in: add new --with-udev, disabled by default, and requiring
  libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
  the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
  to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
  of fields in node device definitions, and an API to look them up,
  remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
  plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
  files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
  virBuildPath and virBuildPathInternal() function
2009-11-12 22:48:24 +01:00
Daniel P. Berrange
ff26194143 Move code for low level QEMU monitor interaction into separate file
The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.

* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
  from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor
2009-11-10 12:14:22 +00:00
Gerhard Stenzel
0aa72ac6fd add MAC address based port filtering to qemu
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
  a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
  in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
2009-11-03 23:44:48 +01:00
Jamie Strandboge
bbaecd6a8f sVirt AppArmor security driver
* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
  src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
  the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
  tests for virt-aa-helper and the security driver, secaatest.c is
  identical to seclabeltest.c except it initializes the 'apparmor'
  driver instead of 'selinux'
2009-10-08 16:34:22 +02:00
Chris Lalancette
9d162096ca Add src/util/storage_file.c to the POTFILES.in.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-30 14:12:03 +02:00
Daniel P. Berrange
d790a66d6b Handle incoming data streams in libvirtd
* daemon/stream.c: Handle incoming stream data packets, queuing until
  stream becomes writable. Handle stream completion handshake
* po/POTFILES.in: Add daemon/stream.c
2009-09-29 15:48:58 +01:00
Daniel P. Berrange
a541c76238 Pull QEMU monitor interaction out to separate file
Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.

Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.

* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
  file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
2009-09-29 11:47:05 +01:00
Daniel P. Berrange
7ad5c00ed9 Misc syntax-check fixes 2009-09-21 14:41:47 +01:00
Miloslav Trmač
03d338608d Local file implementation of secret driver API
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.

(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)

* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
  error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
  Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
2009-09-11 14:54:46 +01:00
Miloslav Trmač
b9a8bef477 Add an internal <secret> XML handling API
Add a <secret> XML handling API, separate from the local driver, to
avoid manually generating XML in other parts of libvirt.

* src/secret_conf.c, src/secret_conf.h: New files.
* po/POTFILES.in, src/Makefile.am: Add secret_conf.
2009-09-11 14:54:40 +01:00
Dave Allan
ee8a06f833 Multipath storage support module
* configure.in src/Makefile.am src/storage_backend.[ch]
  src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in:
  add a new module for storage multipath, it requires device-mapper
2009-09-08 15:47:45 +02:00
Miloslav Trmač
05b9b8fda3 Add volume encryption information handling.
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).

Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.

Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.

This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.

* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
  Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
  Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
  helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
  RNG schema
2009-09-01 18:27:28 +01:00
Amy Griffis
22a1ec68d5 Tighten libvirt's parsing of logging env
* src/libvirt.c src/logging.c: Don't convert high priority levels to the
  debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
  when they're set to the empty string. Warn when the user specifies an
  invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings
2009-08-06 15:38:11 +02:00
Cole Robinson
115c02e871 Add phyp files to POTFILES, to make syntax-check happy. 2009-07-26 17:56:00 -04:00
Daniel Veillard
909d647aab Activate the interface drivers, and cleanups
* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
  breaking syntax checking
2009-07-21 16:15:39 +02:00
Daniel P. Berrange
a147ef3837 Split generic RPC message dispatch code out from remote protocol API handlers
* po/POTFILES.in: Add qemud/dispatch.c
* qemud/dispatch.c, qemud/dispatch.h: Generic code handling dispatch of
  RPC messages.
* qemud/Makefile.am: Add dispatch.c to build
* qemud/qemud.c: Include dispatch.h
* qemud/qemud.h: Remove remoteDispatchClientRequest, remoteRelayDomainEvent
  now in dispatch.h
* qemud/remote.c: Remove remoteDispatchClientRequest, remoteRelayDomainEvent
  now in dispatch.c, and dispatch_args, dispatch_ret, dispatch_fn & dispatch_data
  now in remote.h
* qemud/remote.h: Add typedefs for dispatch_args, dispatch_ret,
  dispatch_fn, dispath_data. Add remoteGetDispatchData() API
2009-07-16 16:09:41 +01:00
Daniel Veillard
2f5fb5e09d add support for netcf XML import and export
* src/interface_conf.c src/interface_conf.h: the import and export
  routines and the internal APIs
* src/Makefile.am: hook the new file in the makefiles
* src/libvirt_private.syms: export a few private symbols internally
* po/POTFILES.in: the new file contains translatable strings
2009-07-15 20:16:26 +02:00
Jim Meyering
7bb22f58b8 make .gnulib a submodule
This makes it so we record (via a git submodule)
a snapshot of whatever version of gnulib we're using,
and none of gnulib sources are in the libvirt repository.
The result is that we have as much reproducibility as when
we version-controlled imported copies of the gnulib sources,
but without the hassle of the manual process we used when
syncing with upstream.

Note that when you clone libvirt, you get only the libvirt
repository, but when you first run ./bootstrap, it clones
gnulib (at the SHA1 recorded via the submodule), creating
the .gnulib/ hierarchy.  Then, the bootstrap script runs
gnulib-tool to populate gnulib/ with the files that make
up the selected modules.

Put the following in your ~/.gitconfig file.
[alias]
  syncsub = submodule foreach git pull origin master

The update procedure is simple:
  git syncsub
  ...build & test...
  git commit -m 'gnulib: sync submodule to latest' .gnulib

* .gitmodules: New file.
* .gnulib: Initialize.
* bootstrap: Set up to use the new submodule.
Stop using --no-vc-files.
Don't remove .gitignore files.
Don't use or create .cvsignore.
Diagnose an invalid --gnulib-srcdir=DIR argument.
* build-aux/vc-list-files: Delete file, now pulled from gnulib.
* build-aux/useless-if-before-free: Likewise.
* po/POTFILES.in: Remove gnulib/lib/gai_strerror.c, since
it no longer contains translatable strings.
* gnulib/*: Remove gnulib/ hierarchy.
2009-07-08 16:17:51 +02:00
Daniel Veillard
81d0ffbc3b NPIV implementation for node device create and destroy
* src/Makefile.am src/node_device.[ch] src/node_device_conf.[ch]
  src/node_device_hal.[ch] src/node_device_hal_linux.c
  src/qemu_driver.c src/remote_internal.c src/storage_backend.c
  src/virsh.c src/xen_unified.c tests/nodedevxml2xmltest.c
  po/POTFILES.in: implementation for node device create and destroy
  in NPIV support, patch by David Allan
Daniel
2009-06-02 15:12:53 +00:00
Daniel P. Berrange
ee8553e156 Fix misc syntax problems with open nebula driver 2009-05-28 13:11:22 +00:00
Cole Robinson
af8600678d Update POTFILES, and s/write/safewrite/ to appease 'make syntax-check' 2009-05-12 20:44:29 +00:00
Daniel P. Berrange
7a367cca30 Ensure VirtualBox domain IDs start from 1 instead of 0 2009-04-21 19:13:23 +00:00
Daniel P. Berrange
55ae53d971 SCSI HBA storage pool implementation (Dave Allan) 2009-04-01 16:03:22 +00:00
Daniel P. Berrange
41ed6eb327 SELinux security driver for sVirt support (James Morris, Dan Walsh & Daniel Berrange) 2009-03-03 10:06:49 +00:00
Daniel P. Berrange
8bd1604cb7 Core internal driver stub for sVirt support (Jams Morris & Dan Walsh) 2009-03-03 09:44:41 +00:00
Daniel Veillard
d217641314 implements dettach, reattach and reset for PCI devices
* configure.in po/POTFILES.in src/Makefile.am src/libvirt_private.syms
  src/pci.c src/pci.h: Add implementations of dettach, reattach and
  reset for PCI devices, patch by Mark McLoughlin
Daniel
2009-03-02 16:18:11 +00:00
Jim Meyering
bc18a91f91 error-reporting calls using VIR_ERR_NO_MEMORY: use virReportOOMError instead
* src/uml_conf.c (VIR_FROM_THIS): Define to VIR_FROM_UML.
* src/xs_internal.c (VIR_FROM_THIS): Define to VIR_FROM_XEN.
* src/xml.c (VIR_FROM_THIS): Define to VIR_FROM_XML.
* src/stats_linux.c (VIR_FROM_THIS): Define to VIR_FROM_STATS_LINUX.
* src/datatypes.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/lxc_conf.c (VIR_FROM_THIS): Define to VIR_FROM_LXC.
* src/libvirt.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/node_device_conf.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/openvz_conf.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/openvz_driver.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/conf.c (VIR_FROM_THIS): Define to VIR_FROM_CONF.
Note: this loses config_filename:config_lineno diagnostics,
but that's ok.
* src/node_device.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/sexpr.c (VIR_FROM_THIS): Define to VIR_FROM_SEXPR.
* po/POTFILES.in: remove src/sexpr.c and src/lxc_conf.c
2009-01-29 12:10:32 +00:00
Jim Meyering
eb0849f370 * po/POTFILES.in: Add src/lxc_conf.c 2009-01-28 13:59:56 +00:00
Jim Meyering
765bca14d1 * POTFILES.in: update: remove src/lxc_conf.c; Add src/bridge.c. 2009-01-27 15:37:34 +00:00
Daniel P. Berrange
437ac354fc Make error reporting threadsafe by avoiding strerror 2009-01-20 17:13:33 +00:00
Daniel P. Berrange
4dac0a1105 Generic internal threads API 2009-01-15 19:56:05 +00:00
Jim Meyering
506629e619 remove unused xmlrpc-related files
* src/xmlrpc.h: Remove file.
* src/xmlrpc.c: Likewise.
* tests/test_xmlrpc.sh: Likewise.
* tests/xmlrpctest.c: Likewise.
* tests/xmlrpcserver.py: Likewise.
* tests/Makefile.am (EXTRA_DIST): Remove xmlserver.py.
(noinst_PROGRAMS): Remove xmlrpctest, along with associated variables.
* po/POTFILES.in: Remove src/xmlrpc.c.
* tests/.cvsignore: Remove xmlrpctest.
2008-12-12 11:31:15 +00:00
Daniel P. Berrange
1eeceaa649 Support domain lifecycle events for Xen (Ben Guthro & Daniel Berrange) 2008-11-25 10:44:52 +00:00
Daniel P. Berrange
620d4be7ae Node device driver for HAL and DeviceKit (David Lively) 2008-11-21 12:27:11 +00:00
Daniel Veillard
4815221333 * po/POTFILES.in src/uml_conf.h src/uml_driver.c: fixes syntax
check errors, reported by Ben Guthro
daniel
2008-11-21 10:06:28 +00:00
Jim Meyering
0e7a565229 mark a few diagnostics for translation
* src/lxc_conf.c (lxcLoadDriverConfig): Mark a diagnostic.
* src/lxc_driver.c (lxcDomainStart): Likewise.
* po/POTFILES.in: Add src/lxc_conf.c.
* Makefile.maint (msg_gen_function): Add virReportErrorHelper
and lxcError.
2008-11-07 16:43:58 +00:00
Daniel P. Berrange
6ace5a39c3 Move some API declarations out of internal.h & hash.c into dedicated files 2008-11-04 23:22:06 +00:00
Chris Lalancette
0fd0cb6037 "make syntax-check" was complaining that network_driver.c was missing from
POTFILES.in.  Add it there, and then fix up one warning about included
c-ctypes.h that wasn't being used.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2008-10-16 12:04:06 +00:00
Daniel P. Berrange
2723efaae1 Update LXC driver in POTFILES.in 2008-08-14 09:07:18 +00:00
Daniel P. Berrange
d1304583d6 Added generic domain XML APIs 2008-07-11 16:23:36 +00:00
Daniel P. Berrange
747fad6654 Generic APIs for network XML configuration 2008-07-11 10:48:34 +00:00
Daniel P. Berrange
3e4ffa4ec0 Added lxc_container.c to POTFILES.in 2008-04-14 17:44:51 +00:00
Jim Meyering
5bb81e1d87 error: mark most string arguments for translation
Also mark some arguments to __virRaiseError.
* Makefile.maint (msg_gen_function): Add error.
* po/POTFILES.in: Add src/openvz_conf.c and src/openvz_driver.c.
* src/openvz_conf.c (openvzParseXML, openvzGetVPSInfo): Mark strings.
* src/openvz_driver.c (openvzDomainLookupByID): Likewise.
(openvzDomainLookupByUUID, openvzDomainLookupByName): Likewise.
(openvzDomainGetInfo, openvzDomainShutdown, openvzDomainReboot)
(openvzDomainCreate, openvzDomainUndefine): Likewise.
* src/remote_internal.c (check_cert_file): Likewise.
(negotiate_gnutls_on_connection, verify_certificate): Likewise.
(remoteAuthenticate, addrToString, remoteAuthSASL): Likewise.
(remoteAuthPolkit, call, really_read_buf): Likewise.
2008-03-27 13:58:56 +00:00
Jim Meyering
513bd04ce1 Mark many more strings for translation.
* Makefile.maint (err_func_re): Add to the list and make it readable.
* po/POTFILES.in: Add src/util.c and src/xm_internal.c, and sort.
* src/storage_backend.c: Fix comment.
* src/util.c (virFileLinkPointsTo): Mark a string.
* qemud/remote.c (remoteDispatchClientRequest): Mark strings.
(remoteDispatchOpen, CHECK_CONN, remoteDispatchGetType): Likewise.
(remoteDispatchDomainGetSchedulerType): Likewise.
(remoteDispatchDomainGetSchedulerParameters): Likewise.
(remoteDispatchDomainSetSchedulerParameters): Likewise.
(remoteDispatchDomainBlockStats): Likewise.
(remoteDispatchDomainInterfaceStats): Likewise.
(remoteDispatchDomainAttachDevice, remoteDispatchDomainCreate):
(remoteDispatchDomainDestroy, remoteDispatchDomainDetachDevice):
(remoteDispatchDomainDumpXml, remoteDispatchDomainGetAutostart):
(remoteDispatchDomainGetInfo, remoteDispatchDomainGetMaxMemory):
(remoteDispatchDomainGetMaxVcpus, remoteDispatchDomainGetOsType):
(remoteDispatchDomainGetVcpus): Likewise.
(remoteDispatchDomainMigratePerform): Likewise.
(remoteDispatchListDefinedDomains, remoteDispatchDomainPinVcpu):
(remoteDispatchDomainReboot, remoteDispatchDomainResume):
(remoteDispatchDomainSave, remoteDispatchDomainCoreDump):
(remoteDispatchDomainSetAutostart): Likewise.
(remoteDispatchDomainSetMaxMemory, remoteDispatchDomainSetMemory):
(remoteDispatchDomainSetVcpus, remoteDispatchDomainShutdown):
(remoteDispatchDomainSuspend, remoteDispatchDomainUndefine):
(remoteDispatchListDefinedNetworks, remoteDispatchListDomains):
(remoteDispatchListNetworks, remoteDispatchNetworkCreate):
(remoteDispatchNetworkDestroy, remoteDispatchNetworkDumpXml):
(remoteDispatchNetworkGetAutostart, remoteDispatchNetworkGetBridgeName):
(remoteDispatchNetworkSetAutostart, remoteDispatchNetworkUndefine):
(addrToString, remoteDispatchAuthSaslInit, remoteDispatchAuthSaslStart):
(remoteDispatchAuthSaslStep, remoteDispatchListDefinedStoragePools):
(remoteDispatchListStoragePools, remoteDispatchStoragePoolCreate):
(remoteDispatchStoragePoolBuild, remoteDispatchStoragePoolDestroy):
(remoteDispatchStoragePoolDelete, remoteDispatchStoragePoolRefresh):
(remoteDispatchStoragePoolGetInfo, remoteDispatchStoragePoolDumpXml):
(remoteDispatchStoragePoolGetAutostart): Likewise.
(remoteDispatchStoragePoolSetAutostart):
(remoteDispatchStoragePoolListVolumes):
(remoteDispatchStoragePoolNumOfVolumes):
(remoteDispatchStoragePoolUndefine, remoteDispatchStorageVolCreateXml):
(remoteDispatchStorageVolDelete, remoteDispatchStorageVolGetInfo):
(remoteDispatchStorageVolDumpXml, remoteDispatchStorageVolGetPath):
(remoteDispatchStorageVolLookupByName): Likewise.
* src/qemu_driver.c (qemudOpenMonitor, qemudStartVMDaemon):
(dhcpStartDhcpDaemon, qemudStartNetworkDaemon):
(qemudDomainSuspend, qemudDomainResume, qemudDomainShutdown):
(qemudDomainGetOSType, qemudDomainSetMaxMemory):
(qemudDomainSetMemory, qemudDomainGetInfo, qemudDomainSave):
(qemudDomainRestore, qemudDomainDumpXML, qemudDomainStart):
(qemudDomainUndefine, qemudDomainChangeCDROM):
(qemudDomainAttachDevice, qemudDomainGetAutostart):
(qemudDomainSetAutostart, qemudDomainInterfaceStats):
(qemudNetworkLookupByUUID, qemudNetworkLookupByName):
(qemudNetworkUndefine, qemudNetworkStart, qemudNetworkDestroy):
(qemudNetworkDumpXML, qemudNetworkGetAutostart):
(qemudNetworkSetAutostart): Likewise.
* src/virsh.c (cmdVcpupin, cmdAttachDevice, cmdDetachDevice): Likewise.
* src/xm_internal.c (xenXMConfigCacheRefresh, xenXMDomainPinVcpu): Likewise.
2008-03-27 13:43:01 +00:00
Daniel Veillard
979bb2bb67 * src/xend_internal.c: applied patch from Saori Fukuta adding the
scheduler API for the Xen daemon driver
* po/POTFILES.in: add the two new linux container modules
Daniel
2008-03-24 09:23:32 +00:00
Daniel P. Berrange
b7db975135 Added disk partition storage pool backend 2008-02-20 15:52:17 +00:00
Daniel P. Berrange
8ec1fcd925 Added iSCSI storage pool backend 2008-02-20 15:49:25 +00:00
Daniel P. Berrange
ac736602fd Added logical volume storage pool driver 2008-02-20 15:45:33 +00:00
Daniel P. Berrange
e39438e869 Added directory/filesystem/netfs based storage pool backend 2008-02-20 15:42:30 +00:00
Daniel P. Berrange
20878720c0 Added main internal storage driver impl 2008-02-20 15:34:52 +00:00
Jim Meyering
247df6e448 Mark all qemudLog diagnostics for translation.
* po/POTFILES.in: Add names of many new files.
* Makefile.maint (err_func_re): Add qemudLog.
Mark diagnostics with _(...).  Split some long lines.
* qemud/qemud.c (remoteCheckCertFile, remoteInitializeGnuTLS):
(qemudDispatchSignalEvent, qemudSetCloseExec, qemudSetNonBlock):
(qemudWritePidFile, qemudListenUnix, remoteMakeSockets):
(remoteListenTCP, qemudInitPaths, qemudInitialize):
(qemudNetworkInit, remoteInitializeTLSSession, remoteCheckDN):
(remoteCheckCertificate, remoteCheckAccess, qemudDispatchServer):
(qemudClientReadBuf, qemudDispatchClientRead):
(qemudClientWriteBuf, qemudDispatchClientWrite, qemudOneLoop):
(remoteConfigGetStringList, checkType, GET_CONF_STR):
(remoteConfigGetAuth, remoteReadConfigFile, main):
* qemud/remote.c (remoteDispatchAuthSaslInit, remoteSASLCheckSSF):
(remoteSASLCheckAccess, remoteDispatchAuthSaslStart):
(remoteDispatchAuthSaslStep, remoteDispatchAuthSaslInit):
(remoteDispatchAuthSaslStart, remoteDispatchAuthSaslStep):
(qemudGetSocketIdentity, remoteDispatchAuthPolkit):
* src/iptables.c (notifyRulesUpdated, MAX_FILE_LEN, iptRulesSave):
(iptRulesReload):
* src/qemu_conf.c (qemudExtractVersionInfo, qemudLoadConfig):
(qemudLoadNetworkConfig, qemudScanConfigDir):
* src/qemu_driver.c (qemudSetCloseExec, qemudSetNonBlock):
(qemudAutostartConfigs, qemudStartup, qemudReload):
(qemudWaitForMonitor, qemudStartVMDaemon, qemudVMData):
(qemudShutdownVMDaemon, qemudStartNetworkDaemon):
(qemudShutdownNetworkDaemon, qemudMonitorCommand):
(qemudDomainUndefine, qemudNetworkUndefine):
* src/uuid.c (virUUIDGenerate):
* src/xm_internal.c (xenXMAttachInterface):
2008-02-07 16:50:17 +00:00
Jim Meyering
05ae9d8bc4 Enable the po-check test; fix violations.
* Makefile.cfg (local-checks-to-skip) [po-check]: Enable.
* po/POTFILES.in: Add three file names.  Sort.
2008-01-29 18:19:46 +00:00
Daniel P. Berrange
e8e5844089 Added support for i18n translation with gettext 2006-09-21 15:24:37 +00:00