add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach
Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()
linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString. The patch below should allow for:
major
major.minor
major.minor.micro
If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)
This patch adds documentation about the 802.1Qbh related parameters
of the virtualport element for 'direct' interfaces.
Signed-off-by: David S. Wang <dwang2@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Drivers load running persistent and transient domain configs before
inactive persistent domain configs, however only the latter would set a
domain's autostart flag. This mismatch between the loaded and on-disk
state could later cause problems with "virsh autostart":
# virsh autostart example
error: Failed to mark domain example as autostarted
error: Failed to create symlink '/etc/libvirt/qemu/autostart/example.xml to '/etc/libvirt/qemu/example.xml': File exists
This patch ensures the autostart flag is set correctly even when the
domain is already defined.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=632100https://bugzilla.redhat.com/show_bug.cgi?id=675319
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
As reported by Diego Blanco in
https://bugzilla.redhat.com/show_bug.cgi?id=702602
commit f0443765 which replaced openvz_readline to getline(3)
broke OpenVZ driver as it changed semantics of EOF-handling
when parsing OpenVZ configuration.
There're several other issues reported with current OpenVZ driver:
#1: unclear error message when parsing "CPUS=" line
#2: openvz driver goes into crashing loop
#3: "NETIF=" line in configuration is not parsed correctly
#4: aborts even when optional parameter is missing
#5: there's a potential memory leak
This updated patch to fix #[145]. This patch does not fix #[23]
as I haven't verified these yet, but this at least got me to run
OpenVZ on libvirt once again.
Originally most of libvirt domain-specific calls were blocking
during a migration.
A new mechanism to allow specific calls (blkstat/blkinfo) to be
executed in such condition has been implemented.
In the long term it'd be desirable to get a more general
solution to mark further APIs as migration safe, without needing
special case code.
* src/qemu/qemu_migration.c: add some additional job signal
flags for doing blkstat/blkinfo during a migration
* src/qemu/qemu_domain.c: add a condition variable that can be
used to efficiently wait for the migration code to clear the
signal flag
* src/qemu/qemu_driver.c: execute blkstat/blkinfo using the
job signal flags during migration
When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
Users often edit XML file stored in configuration directory
thinking of modifying a domain/network/pool/etc. Thus it is wise
to let them know they are using the wrong way and give them hint.
Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".
Fix regression in virsh logging
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=664059
Reattaching pci device back to host without destroying guest or
detaching device from guest would cause host to crash. This patch adds
a check before doing device reattach. If the device is being assigned
to guest, libvirt refuses to reattach device to host. The patch only
works for Xen, for it just checks xenstore to get pci device
information.
Signed-off-by: Yufang Zhang <yuzhang@redhat.com>
gcc 4.6 warns when a variable is initialized but isn't used afterwards:
vmware/vmware_driver.c:449:18: warning: variable 'vmxPath' set but not used [-Wunused-but-set-variable]
This patch fixes these warnings. There are still 2 offending files:
- vbox_tmpl.c: the variable is used inside an #ifdef and is assigned several
times outside of #ifdef. Fixing the warning would have required wrapping
all the assignment inside #ifdef which hurts readability.
vbox/vbox_tmpl.c: In function 'vboxAttachDrives':
vbox/vbox_tmpl.c:3918:22: warning: variable 'accessMode' set but not used [-Wunused-but-set-variable]
- esx_vi_types.generated.c: the name implies it's generated code and I
didn't want to dive into the code generator
esx/esx_vi_types.generated.c: In function 'esxVI_FileQueryFlags_Free':
esx/esx_vi_types.generated.c:1203:3: warning: variable 'item' set but not used [-Wunused-but-set-variable]
This patch enables the relative backing file path support provided by
qemu-img create.
If a relative path is specified for the backing file, it is converted
to an absolute path using the storage pool path. The absolute path is
used to verify that the backing file exists. If the backing file exists,
the relative path is allowed and will be provided to qemu-img create.
Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.) This patch helps to do that
by making additional logging available for the following events:
creating/defining/undefining domains
creating/defining/undefining/starting/stopping networks
creating/defining/undefining/starting/stopping storage pools
creating/defining/undefining/starting/stopping storage volumes.
* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
src/storage/storage_driver.c: provide more VIR_INFO logging
Wen Congyang gained commiter access
Created a new section of previous commiters to the project
but not involved much anymore: Karel Zak, Atsushi SAKAI,
Dave Leskovec and Dan Smith
The current description suggests that you always have to provide
a valid typeVer pointer. But if you want only the libvirt version
it's also possible to set type and typeVer to NULL to skip the
hypervisor part.
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When compiling libvirt with GCC 3.4.6 the following warning is being triggered quite a lot:
util/memory.h:60: warning: declaration of 'remove' shadows a global declaration
/usr/include/stdio.h:175: warning: shadowed declaration is here
Fix this by renaming the parameter to 'toremove'.
Depending if the qemu binary supports multiple pci-busses, the device
options will contain "bus=pci" or "bus=pci.0".
Only x86_64 and i686 seem to have support for multiple PCI-busses. When
a guest of these architectures is started, set the
QEMUD_CMD_FLAG_PCI_MULTIBUS flag.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
I added a host definition to a network definition:
<network>
<name>Lokal</name>
<uuid>2074f379-b82c-423f-9ada-305d8088daaa</uuid>
<bridge name='virbr1' stp='on' delay='0' />
<ip address='192.168.180.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.180.128' end='192.168.180.254' />
<host mac='23:74:00:03:42:02' name='somevm' ip='192.168.180.10' />
</dhcp>
</ip>
</network>
But due to the wrong if-statement the argument --dhcp-hostsfile doesn't get
added to the dnsmasq command. The patch below fixes it for me.
While not technically a double free (since VIR_FREE NULLs the
pointer), this is unnecessary extra code.
This crept in when the function was converted from virRun to virCommand.
The AUTHORS file has also been updated.
Current code does not pass VM mac address to a 802.1Qbh direct attach
interface using IFLA_VF_MAC. This patch adds support in macvtap code to
send IFLA_VF_MAC netlink request during port profile association on a
802.1Qbh interface.
Stefan Cc'ed for comments because this patch changes a condition for
802.1Qbg
802.1Qbh support for IFLA_VF_MAC in enic driver has been posted and is
pending acceptance at http://marc.info/?l=linux-netdev&m=129185244410557&w=2
Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: Josh Durgin <joshd@hq.newdream.net>
This patch adds network disk support to libvirt/QEMU. The currently
supported protocols are nbd, rbd, and sheepdog. The XML syntax is like
this:
<disk type="network" device="disk">
<driver name="qemu" type="raw" />
<source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
<host name="mon1.example.org" port="6000">
<host name="mon2.example.org" port="6000">
<host name="mon3.example.org" port="6000">
</source>
<target dev="vda" bus="virtio" />
</disk>
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
When libvirt-guests is being stopped, I get the following message:
$Running guests on default URI: test-vm
$Suspending guests on default URI...
$Suspending test-vm: /etc/init.d/libvirt-guests: 340: Syntax error: Bad fd
number
When dumping a domain, it's reasonable to save dump-file in raw format
if dump format is misconfigured or the corresponding compress program
is not available rather then fail dumping.
When we set migrate_speed by json, we receive the following
error message:
libvirtError: internal error unable to execute QEMU command
'migrate_set_speed': Invalid parameter type, expected: number
The reason is that: the arguments of migrate_set_speed
by json is json number, not json string.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>