When a thread-context object is specified on the cmd line, then
QEMU spawns a thread and sets its affinity to the list of NUMA
nodes specified in .node-affinity attribute. And this works just
fine, until the main QEMU thread itself is not restricted.
Because of v5.3.0-rc1~18 we restrict the main emulator thread
even before QEMU is executed and thus then it tries to set
affinity of a thread-context thread, it inevitably fails with:
Setting CPU affinity failed: Invalid argument
Now, we could lift the pinning temporarily, let QEMU spawn all
thread-context threads, and enforce pinning again, but that would
require some form of communication with QEMU (maybe -preconfig?).
But that would still be wrong, because it would circumvent
<emulatorpin/>.
Technically speaking, thread-context is an internal
implementation detail of QEMU, and if it weren't for it, the main
emulator thread would be doing the allocation. Therefore, we
should honor the pinning and prune the list of node so that
inaccessible ones are dropped.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since qemuxml2argvtest is now using virnumamock, there's no need
for qemuxml2argvmock to offer reimplementation of virNuma*()
functions. Also, the comment about CLang and FreeBSD (introduced
in v4.3.0-40-g77ac204d14) is no longer true. Looks like noinline
attribute was the missing culprit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, the memory-hotplug-dimm-addr.xml test case pins its vCPUs
onto CPUs 0-1 which correspond to NUMA node #0 (per
tests/vircaps2xmldata/linux-basic/system/node/node0). Place vCPUs
onto nodes #1 and #2 too so that DIMM <memory/> device can
continue using thread-context after future patches. This
configuration, as-is currently, would make QEMU error out anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have couple of qemuxml2argvtest cases where up to 8 NUMA nodes
are assumed. These are used to check whether disjoint ranges of
host-nodes= is generated properly. Without prejudice to the
generality, we can rewrite corresponding XML files to use up to 4
NUMA nodes and still have disjoint ranges.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While no part of cmd line building process currently depends on a
host NUMA configuration, this will change soon. Use freshly
changed virnumamock from qemuxml2argvtest and make the mock read
NUMA data from vircaps2xmldata which seems to have the most rich
NUMA configuration.
This also means, we have to start building virnumamock
unconditionally. But this is not a problem, since nothing inside
of the mock relies on Linux specificity. The whole mock is merely
just reading files and parsing them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce a mock of virNumaGetNodeOfCPU() because soon we will
need virNumaCPUSetToNodeset() to return predictable results.
Also, fill in missing symlinks in vircaps2xmldata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In a few places we still use the good old:
sizeof(var) / sizeof(var[0])
sizeof(var) / sizeof(int)
The G_N_ELEMENTS() macro is preferred though. In a few places we
don't link with glib, so provide the macro definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
libxl added support for specifying custom firmware paths long ago. The
functionality exists in all Xen version supported by libvirt. This patch
adds support for user-specified efi firmware paths in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 54fa1b44af ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d4 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.
Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.
Correct this, and add some XML/argv tests.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Capability to determine whether this qemu supports the 'blob' option for
virtio-gpu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't set any capability and we don't want to add
arch-dependent always-peresent capabilities in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP and QEMU_CAPS_LOADPARM
are always asserted via virQEMUCapsInitQMPBasicArch thus don't need to
be explicitly enabled by tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
testUpdateQEMUCaps calls virQEMUCapsInitQMPBasicArch which already sets
it. Purge the capability from the testing code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is based on a platform check rather than what given qemu
supports.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 24cc9cda82 switched over to use -machine hpet, but one of the
steps it did was to clear the QEMU_CAPS_NO_HPET capability.
The validation check still uses the old capability though which means
that for configs which would explicitly enable HPET we'd report an error.
Since HPET is an x86(_64) platform specific device, convert the
validation check to an architecture check as all supported qemu versions
actually support it.
Modify a test case to request HPET to catch posible future problems.
Fixes: 24cc9cda82
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemu-system-aarch64' is superset of the soon to be deprecated
'qemu-system-arm' binary. We can move over all of our fake-caps tests to
real caps on aarch64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always assert the flag for aarch64 qemus and in qemu the 'aarch64'
cpu property doesn't seem to be optional.
Remove checks and remove impossible test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the 'ppc-dtb' and 'ppce500-serial' to use real capabilities
albeit captured from a non-native machine. Thus the XML needs to be
converted to use virt type 'qemu'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data are obtained from a x86_64 machine thus don't really represent
physical hardware, but it's better than nothing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preserve testing of the MMIO use case in case when GPEX is complied out
of qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain cases we want to use as-real capabilities as possible but
that doesn't allow testing certain fallback scenarios of features that
can be complied out of QEMU.
ARG_QEMU_CAPS_DEL can be used similarly to ARG_QEMU_CAPS but the flag
arguments are actually masked out of the resulting caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather that populate a virQEMUCaps object we now populate a bitmap with
the fake capabilities and transfer it into the virQEMUCaps later.
This unifies the code paths between the fully fake caps tests and real
caps + fake flags.
Also the same approach will be used in upcomming patch to add
possibility to mask out flags from real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's just one case when we're populating the cache with empty caps so
that can allocate a dummy virQEMUCaps object rather than having the
logic inside qemuTestCapsCacheInsertImpl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all callers always pass a valid pointer which in turn allows us to
remove return value check from the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The allocation of the object itself can't fail. What can fail is the
creation of the class on a programming error. Rather than punting the
error up the stack abort() directly on the first occurence as the error
can't be fixed during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both 'kvm_machines' and 'qemu_machines' now have the same members so we
can simply drop kvm_machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the only outstanding test case for a 'sparc' machine to modern
test infrastructure.
'sparc' machine type also needs to be added to the list of supported
arches in testQemuGetLatestCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Real capabilities populate the binary name, while fake don't. We can
directly insert the capabilities using the real binary name.
This will allow to remove 'qemu_emulators' entries once all tests are
converted to real capabilties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make callers use virFileCacheClear to clear the cache before populating
it rather than trying to overwrite what's in it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use x86_64 emulator and machine and remove the nocaps version of the
test.
Fixes: 80a37e96a9
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Integrate the two special cases used for schema testing into the more
useful qemuxml2argvtest, whose input data is still tested against the
schema.
Add also a xml output variant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The schema tested by removed test cases is tested by other, more useful,
test cases:
- 'maxMemory'
- qemuxmlargvdata/memory-hotplug*
- 'backingChains'
- qemuxmlargvdata/disk-backing-chains*
- 'timers'
- qemuxml2argvdata/kvm-pit-delay.xml
- qemuxml2argvdata/clock-catchup.xml
- 'qemu-simple-description-title.xml'
- 'qemuxml2argvdata/minimal.xml
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out that those overrides I recently removed where actually
there for a reason, and there was a motivation behind creating
the driver config as unprivileged too O:-)
Until a solution that can both ensure predictable output and
avoid code duplication is developed, go back to the previous
approach.
Fixes: 2f56f69f7f ("tests: Create privileged config for QEMU driver")
Fixes: 0f49b6cc6b ("tests: Drop no longer necessary overrides")
Fixes: 0b464cd84f ("tests: Drop more QEMU driver config overrides")
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
These are allegedly necessary to keep the output consistent,
but now that we're using a privileged config for the driver we
get the desired behavior out of the box, and as a bonus the
paths match what you would actually see on a regular host.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We use standard paths for almost everything else.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For almost all directories, the value we set matches the one
a standard deployment would use, but in a couple of cases they
deviate from that. Keep things consistent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
None of these settings is specific to the xml2argv test. Moving
them to the common code ensures the behavior of the QEMU driver
is consistent across all QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Creating a privileged config ensures these are already set
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Our QEMU test suite effectively covers the qemu:///system
scenario, and we have to partially replace the unprivileged
config with its privileged equivalent after the fact to keep up
the illusion.
Instead of jumping through these extra hoops, we can simply
start with a privileged configuration matching the privileged
driver we're creating for test programs.
This change highlights that we were missing a couple of
overrides, specifically in the tests for passt and dbus. Now
that we're creating a privileged config, this kind of issue
shouldn't be able to slip into the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Most test programs were already doing this, and moving it to
the common code ensures we see consistent behavior across all
QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These are intended to be used for just a few specific tests,
but since we don't always free them up afterwards they could
end up accidentally affecting subsequent tests as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Follow the example of other similar settings and only enable it
for the few test cases that are actually about the specific
functionality, disabling it immediately afterwards.
A few test cases that were completely unrelated to SPICE TLS no
longer see the effects of having the feature enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like TLSx509certdirs, these can be set throughout the
lifetime of the test program.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The various TLSx509certdirs can be set throughout the lifetime
of the test program without issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We use these in QEMU command lines, so we should poison them
to catch test suite issues.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
QEMU deprecated the '-no-acpi' option, thus we should switch to the
modern way to use '-machine'.
Certain ARM machine types don't support ACPI. Given our historically
broken design of using '<acpi/>' without attribute to enable ACPI and
qemu's default of enabling it without '-no-acpi' such configurations
would not work.
Now when qemu reports whether given machine type supports ACPI we can do
a better decision and un-break those configs. Unfortunately not
retroactively.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/297
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The return data from 'query-machines' now contains an 'acpi' field. If
the field is present we can use it to decide how to handle user's
setting of '<acpi/>' domain feature.
Add logic to extract the 'acpi' field and store it in machine type list
along with other properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v7.2.0-2146-g2946e1af27
Notable changes:
- 'acpi' field in 'query-machines' added
- 'SapphireRapids(-v1)' cpu model added
- 'fsrs', 'fsrc', 'fzrm' cpu features added and available via TCG
- 'fsrm' feature can be now emulated by qemu
- 'smm-enabled' property added to 'ICH9-LPC' device
- 'luks-any' encryption type for RBD blockdev backend and way to
specify encryption options for parent image via 'parent'
- 'xen-event-inject', 'xen-event-list' commands added
- 'xen-xenstore', 'xen-gnttab', 'xen-evtchn', 'xen-overlay',
'xen-platform'
- 'i2c-echo' device added
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now always assume support for polling mode of iothreads.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove disks which are not necessary to demonstrate iothread config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use latest caps for the tests even though the original test case didn't
need any capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the cputune-iothreads, cputune-iothreadsched-zeropriority,
cputune-iothreadsched test files by moving the relevant elements into
the cputune case as we can setup scheduler settings for multiple objects
and thus test everything in one go.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for cputune-numatune, cputune-zero-shares,
cputune, and vcpu-placement-static cases. Do the necessary tweaks to
work with actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for the basic tests. The emulator needed to be
tweaked to work with the real caps data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'iothreads-disk' covers everything that 'iothreads' did in addition to
actually using the iothread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions now support iothreads thus upcoming patches
will be removing the capability checks. Remove the 'iothreads-nocap'
case which will become invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setting the LIBVIRT_SKIP_CLEANUP environment variable results
in the contents of fakerootdir being preserved for inspection.
Be more helpful towards the developer and print out the path
in this case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Instead of having each test manually initialize and cleanup
its own fakerootdir, do that as part of the common test
initialization logic in virTestMain().
In most cases we can simply drop the relevant code from the
test program, but scsihosttest uses the value of fakerootdir
as a starting point to build another path, so we need to do
things slightly differently. In order to keep things working,
we retrieve the value from the LIBVIRT_FAKE_ROOT_DIR
environment variable, same as all the mock libraries are
already doing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Most replacements are completely straightforward but
vircgrouptest requires slightly different handling because,
instead of initializing a single fakerootdir at the start of
the test program and cleaning it up at the end, it creates
multiple different ones one after the other.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We have this logic open-coded all over the test suite. Provide
proper helpers implementing it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These cover various scenarios related to firmware formats,
specifically ensuring that all the ways in which the user can
ask for a non-default format to be used work correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, firmware selection is performed as part of the
domain startup process. This mostly works fine, but there's a
significant downside to this approach: since the process is
affected by factors outside of libvirt's control, specifically
the contents of the various JSON firmware descriptors and
their names, it's pretty much impossible to guarantee that the
outcome is always going to be the same. It would only take an
edk2 update, or a change made by the local admin, to render a
domain unbootable or downgrade its boot security.
To avoid this, move firmware selection to the postparse phase.
This way it will only be performed once, when the domain is
first defined; subsequent boots will not need to go through
the process again, as all the paths that were picked during
firmware selection are recorded in the domain XML.
Care is taken to ensure that existing domains are handled
correctly, even if their firmware configuration can't be
successfully resolved. Failure to complete the firmware
selection process is only considered fatal when defining a
new domain; in all other cases the error will be reported
during startup, as is already the case today.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we ignore all firmwares that are not in raw format
while performing autoselection, we can have descriptors for
firmware builds in QCOW2 format without breaking anything.
Note that the descriptors are arranged so that they have the
highest priority on aarch64, but the lowest one on x86_64.
This matches the expectation that QCOW2 will quickly be
adopted as the default on aarch64, where its use produces
significant benefits in terms of memory usage, while x86_64
will likely stick with raw for the foreseeable future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, if SMM is explicitly disabled in the domain XML
but a firmware descriptor that requires SMM to be enabled has
the highest priority and otherwise matches the requirements,
we pick that firmware only to error out later, when the domain
is started.
A better approach is to take into account the fact that SMM is
disabled while performing autoselection, and ignore all
descriptors that advertise the requires-smm feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover scenarios such as using the new, more verbose
format of the <nvram> element to point to a local path, mixing
firmware autoselection with non-local NVRAM files, and
explicitly disabling SMM when using firmware autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some of the test cases had only been added to the xml2argv
test program and not to the xml2xml one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of the differences, such as those in the domain name or
amount of memory, are fairly harmless, but they still make it
more cumbersome than necessary to directly compare different
input (and output) files.
More importantly, the use of unversioned machine types in some
of the test cases results in the descriptor-based autoselection
logic being effectively skipped, because the compatible machine
types as listed in them are only the versioned variants.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already the case for the vast majority, but a few are
using explicit capabilities lists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most test cases are on 64-bit architectures already, but there
are a couple of exceptions.
Right now this works, but it will no longer fly after some
upcoming changes. Prepare for those by switching away from
32-bit architectures.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already do this in qemuxml2argvtest.
Right now setting this doesn't change anything, but it will
become relevant later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU's "reconnect" option of "-netdev stream" tells QEMU to
periodically (period is given in seconds as an argument to the option)
attempt to reconnect to the same passt socket to which it had
originally connected to. This is useful in cases where the passt
process terminates, and libvirtd starts a new passt process in its
place (which doesn't happen yet, but will happen automatically after
an upcoming patch in this series).
Since there is no real hueristic for determining the "best" value of
the reconnect interval, rather than clutter up config with a knob that
nobody knows how to properly twiddle, we just set the reconnect timer
to 5 seconds.
"-netdev stream" first appeared in QEMU 7.2.0, but the reconnect
option won't be available until QEMU 8.0.0, so we need to check QEMU
capabilities just in case someone is using QEMU 7.2.0 (and thus can
support passt backend, but not reconnect)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Detect that the 'stream' netdev backend supports reconnecting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 5af6134e I had added a new capability that is true if QEMU
allows "-netdev stream", but somehow neglected to actually check it in
commit a56f0168d when hooking up passt support to qemu. This isn't
catastrophic, since QEMU itself will still report an error, but that
error isn't as easy to understand as a libvirt-generated error.
Fixes: a56f0168d5
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability detects the availability of the pvpanic-pci
device that is required in order to use pvpanic on Arm (original
pvpanic is an emulated ISA device, for which Arm does not have
support).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Whilst reviewing a patch upstream (that ended up as
v9.0.0-200-g092176e5ec), I realized we don't have a single
xml2xml test for CH driver. Well, introduce the test with one
simple test case for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When running "virsh domcapabilities" on a s390x host, all the CPU
models show up with vendor='unknown' - which sounds kind of weird
since the vendor of these mainframe CPUs is well known: IBM.
All CPUs starting with either "z" or "gen" match a real mainframe
CPU by IBM, so let's return the string "IBM" for those now.
The only remaining ones are now the artifical "qemu" and "max"
models from QEMU itself, so it should be OK to get an "unknown"
vendor for those two.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Boris Fiuczynski<fiuczy@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virURIFormat() function either returns a string, or aborts
(on OOM). There's no way this function can return NULL (as of
v7.2.0-rc1~277). Therefore, it doesn't make sense to check its
retval against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With the current way the myInit() is written, it's fairly easy to
miss initialization of @subsys variable as the variable is
allocated firstly on the stack and then it's assigned to
hostdev[i] which was allocated using g_new0() (this it is
containing nothing but all zeroes).
Make the subsys point to the corresponding member in hostdev[i]
from the start. This way only the important bits are overwritten
and the rest stays initialized to zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
With recent work on storing original PCI stats in
_virDomainHostdevSubsysPCI struct, the virhostdevtest can across
a latent bug we had. Only some parts of the
virDomainHostdevSubsys structure are initialized. Incidentally,
subsys->u.pci.origstates is not one of them. This lead to
unexpected crashes at runtime.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use virDomainDeviceType as type and update all switch statements which
didn't mention all possible values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <origstates> XML element captures private data of a PCI device
needed to restore it after a VM is started. Unfortunately at the point
when it was added we didn't yet have the existing private data
infrastructure.
Since the element is parsed only in cases similar to the status XML we
need to test it there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To ensure that we can hot-unplug the disk including the associated fdset
we need to store the fdset ID in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Copy the pointer to qemuFDPass into struct qemuBlockStorageSourceAttachData
so that it can be used from qemuBuildBlockStorageSourceAttachDataCommandline
rather than looping again in qemuBuildDiskSourceCommandLineFDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The <tune/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing specific about net-mtu test. In fact, if device
addresses are filled in (and some elements reordered), we get the
same XML. Make those changes to the input XML and turn the output
XML to be a symlink.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The iTCO watchdog is part of the q35 machine type since its inception,
we just did not add it implicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'domaincapstest' is currently skipping RISC-V tests. Let's enable it.
The decision of enabling the "virt" machine is based on the idea that
this is the most used QEMU RISC-V machine in the community and it's the
most likely to be widely supported in the long run.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Update RISC-V capabilities for the QEMU 8.0.0 cycle. Changes made are
based on the JSONification of device parameters.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Use g_autoptr() for virNWFilterDef and virNWFilterRuleDef and remove
unnecessary label.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
net-user-passt.args was generated early during testing of the passt
qemu commandline, when qemuxml2argvtest was using
DO_TEST("net-user-passt"). This was later changed to
DO_TEST_CAPS_LATEST(), so the file net-user-passt.x86_64-latest.args
is used instead, but the original (now unused) test file was
accidentally added to the original patch. This patch removes it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Currently, the ThreadContext object is generated whenever we see
.host-nodes attribute for a memory-backend-* object. The idea was
that when the backend is pinned to a specific set of host NUMA
nodes, then the allocation could be happening on CPUs from those
nodes too. But this may not be always possible.
Users might configure their guests in such way that vCPUs and
corresponding guest NUMA nodes are on different host NUMA nodes
than emulator thread. In this case, ThreadContext won't work,
because ThreadContext objects live in context of the emulator
thread (vCPU threads are moved around by us later, when emulator
thread finished its setup and spawned vCPU threads - see
qemuProcessSetupVcpus()). Therefore, memory allocation is done by
emulator thread which is pinned to a subset of host NUMA nodes,
but tries to create a ThreadContext object with a disjoint subset
of host NUMA nodes, which fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
passt support requires "-netdev stream", which was added to QEMU in
qemu-7.2.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initial support for network devices using passt (https://passt.top)
for the backend connection will require:
* new attributes of the <backend> subelement:
* "type" that can have the value "passt" (to differentiate from
slirp, because both slirp and passt will use <interface
type='user'>)
* "logFile" (a path to a file that passt should use for its logging)
* "upstream" (a netdev name, e.g. "eth0").
* a new subelement <portForward> (described in more detail later)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the qemuxml2xml variant and add output data for qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new argument type for testQemuInfoSetArgs named ARG_FD_GROUP
which allows users to instantiate tests with populated FD passing hash
table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Deleting external snapshots will require configuring autofinalize to
synchronize the block jobs for disks withing single snapshot in order to
be able safely abort of one of the jobs fails.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Upcoming snapshot deletion code will require that multiple commit jobs
are finished in sync. To allow aborting then if one fails we will need
to use manual finalization of the jobs.
This commit implements the monitor code for `job-finalize`.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until commit 629282d884, using mode=restrictive caused
virNumaSetupMemoryPolicy() to be called from qemuProcessHook(),
and that in turn resulted in virNumaNodesetIsAvailable() being
called and the nodeset being validated.
After that change, the only validation for the nodeset is the one
happening in qemuBuildMemoryBackendProps(), which is skipped when
using mode=restrictive.
Make sure virNumaNodesetIsAvailable() is called whenever a
nodeset has been provided by the user, regardless of the mode.
https://bugzilla.redhat.com/show_bug.cgi?id=2156289
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The one for mode=strict fails, as expected, while the one for
mode=restrictive currently doesn't even though it should. The
next commit will address the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test is superseded by 'disk-backing-chains-(no)index' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit da9f3cd84b added the seclabel example into the
'disk-backing-chains' case.
Since the only thing that 'disk-backing-chains' tests which
'disk-backing-chains-(no)index' don't test is the seclabel we'll be able
to remove the test case if we add the seclabel example.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Inside of qemuCaps (for the corresponding accelerator) we have
full host CPU expansion stored, among with supported Hyper-V
Enlightenments. To report them in the domain capabilities, we
just have to pick those starting with "hv-" and see if we know
them.
You may notice that neither of our domaincapsdata test shows any
enlightenment. This is because the test works by parsing
corresponding qemucapabilitiesdata/caps_*.xml file and none of
these store the full host CPU expansion (hostCPU.fullQEMU)
because that is runtime piece of information and not formatted
into virQEMUCaps XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717611
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have qemuMonitorGetCPUModelExpansion() aware of
Hyper-V Enlightenments, we can start querying it. Two conditions
need to be met:
1) KVM is in use,
2) Arch is either x86 or arm.
It may look like modifying the first call to
qemuMonitorGetCPUModelExpansion() inside of
virQEMUCapsProbeQMPHostCPU() would be sufficient but it is not.
We really need to ask QEMU for full expansion and the first call
does not guarantee that.
For the test data, I've just copied whatever
'query-cpu-model-expansion' returned earlier, therefore there are
no hv-* props. But that's okay - the full expansion is not stored
in cache (and thus not formatted in
tests/qemucapabilitiesdata/caps_*.replies files either). This is
purely runtime thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This continues and finishes propagation of the @hv_passthrough
argument started in the previous commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemu is about to deprecate the '-no-hpet' option in favor of configuring
the timer via '-machine'.
Use the QEMU_CAPS_MACHINE_HPET capability to switch to the new syntax
and mask out the old QEMU_CAPS_NO_HPET capability at the same time to
prevent using the old syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The capability represents that qemu accepts the configuration of the
HPET timer via -machine hpet=on/off rather than the
soon-to-be-deprecated '-no-hpet' option.
The capability is detected from 'query-command-line-options' which
recently added the 'hpet' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add test data based on qemu commit v7.2.0-333-g222059a0fc
- query-command-line-options now reports more accurate data
- machine types for the 8.0 cycle were added
- vhost-vdpa device support was added
- default value of 'noreboot' changed from 'true' to 'false'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That way it actually fits with what the condition checks for.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This way we actually check for the proper error, not any error like invalid JSON
format.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It just so happens that our JSON snippets in
qemucapabilitiesdata/*.replies files are separated by an empty
line. These empty lines are then overwritten to make a single
line JSON. Nevertheless, the line counter @line is not
incremented which then leads to a misleading numbers in errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new backend type 'external' for connecting to a swtpm daemon
not managed by libvirtd.
Mostly in one commit, thanks to -Wswitch and the way we generate
capabilities.
https://bugzilla.redhat.com/show_bug.cgi?id=2063723
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 7.2 was released, update the capabilities data to the final state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The linux/magic.h header has existed since
commit e18fa700c9a31360bc8f193aa543b7ef7b39a06b
Author: Jeff Garzik <jeff@garzik.org>
Date: Sun Sep 24 11:13:19 2006 -0400
Move several *_SUPER_MAGIC symbols to include/linux/magic.h.
This is old enough that all our supported platforms can be assumed
to have this header.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When running virsh snapshot-* command, such as snapshot-create-as /
snapshot-delete, it prints a result message.
On the other hand virsh snapshot-revert command doesn't print a result
message.
So, This patch fixes to add message when running virsh snapshot-revert
command.
# virsh snapshot-create-as vm1 test1
Domain snapshot test01 created
# virsh snapshot-revert vm1 test1
# virsh snapshot-delete vm1 test1
Domain snapshot test01 deleted
Signed-off-by: Haruka Ohata <ohata.haruka@fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The 'screendump' command has new argument 'format'. Let's expose
this on our QMP level so that callers can specify the format, if
they wish so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In its v7.1.0-rc0~125^2~6 commit, QEMU gained support for taking
screenshots in PNG format. Track this capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of recent commits I've introduced a new test case to
commandtest. In the test case I'm using poll() to wait for data
on a pipe (the write end is passed to commandhelper). However, on
FreeBSD the POLLIN semantic is a bit different:
POLLIN Data other than high priority data may be read
without blocking.
Well, the pipe is non-blocking, so even if there's no data to be
read the flag is set (and subsequent read() returns 0). On the
other hand, POLLHUP is set too, BUT, if the commandhelper manages
to write everything into the pipe and die right after we'd get
both POLLIN and POLLHUP after the very first time poll() returns.
That's very unfortunate, but okay - we can just check whether
read() returned zero and break from the reading loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Instead of using:
if (STRNEQ(a, b)) {
virTestDifference(stderr, a, b);
...
}
we can use:
if (virTestCompareToString(a, b) < ) {
...
}
Generated by the following spatch:
@@
expression a, b;
@@
- if (STRNEQ(a, b)) {
+ if (virTestCompareToString(a, b) < 0) {
...
- virTestDifference(stderr, a, b);
...
}
and its variations (STRNEQ_NULLABLE() instead of STRNEQ(), then
in some cases variables passed to STRNEQ() are in reversed order
when compared to virTestCompareToString()).
However, coccinelle failed to recognize the pattern in
testNWFilterEBIPTablesAllTeardown() so I had to fix it manually.
Also, I manually fixed testFormat() in tests/sockettest.c as I
didn't bother writing another spatch rule just for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The virTestDifference() is perfectly capable of handling NULL
arguments. There's no need to wrap arguments in NULLSTR().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Two things are happening here:
1) Call to virTestDifference() is guarded by '!result ||
STRNEQ(result, _)' check. This is suboptimal since we have
STRNEQ_NULLABLE().
2) There are couple of VIR_TEST_DEBUG() printings, which are
useless. If debug is off they don't print anything, and if it
is on, then much more information is printed by subsequent
virTestDifference().
This makes the STRNEQ() + virTestDifference() combo look similar
to the rest of tests and thus can be picked up by spatch later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In the commandtest there is checkoutput() function which checks
the latest log of commandhelper (containing things like cmd line
arguments, env vars, FDs, CWD, etc.) and compares that against
expected output. Well, the way this function implements that is
effectively by open coding virTestCompareToFile() except for the
nice feature that the virTestCompareToFile() has:
VIR_TEST_OUTPUT_REGENERATE.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Introduce a test case which ensures that a daemonized process can
work with virCommandSetSendBuffer() when async IO is enabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The virCommandSetSendBuffer() function consumes passed @buffer,
but takes it only as plain pointer. Switch to a double pointer to
make this obvious. This allows us then to drop all
g_steal_pointer() in callers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In test27() the virCommandSetSendBuffer() is used, which expects
unsigned char. Use that type for variables which are passed to
the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
QEMU capabilities is the only thing we use from priv so we can just pass
that directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When an internal API takes a vm pointer, it's usually just after the
driver argument.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
On 32-bit arches, it's possible not only to request
-D_FILE_OFFSET_BITS=64 (which is always done with meson) but also
-D_TIME_BITS=64. With glibc, both of these affect what variant of
stat() or lstat() is called. With 64 bit time it's:
__stat64_time64() or __lstat64_time64(), respectively.
Fortunately, no other variant (__xstat(), __xstat64()) has
_time64 alternative and thus does not need similar treatment.
Similarly, musl is not affected by this.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/404
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nothing in virnettlscontexttest nor virnettlssessiontest calls
any of random number generator functions overridden
virrandommock. GnuTLS handles RNG within itself.
Therefore, there's no need to preload the mock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When generating memory for main guest memory memory-backend-*
might be used. This means, we may need to generate thread-context
objects too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When generating memory for memory devices memory-backend-* might
be used. This means, we may need to generate thread-context
objects too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When generating memory for guest NUMA memory-backend-* might be
used. This means, we may need to generate thread-context objects
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In its commit v7.1.0-1429-g7208429223 QEMU gained new object
thread-context, which allows running specialized tasks with
affinity set to a given subset of host CPUs/NUMA nodes. Even
though only memory allocation task accepts this new object, it's
exactly what we aim to implement in libvirt. Therefore, introduce
a new capability to track whether QEMU is capable of this object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Downstream CI recently encountered failures of libxlxml2domconfigtest when
building libvirt packages against Xen 4.17 rc3 packages. The test fails on
vnuma_hvm config, where suddently the actual json produced by
libxl_domain_config_to_json() contains a 'pnode' entry in the 'vnuma_nodes'
list, which is absent in the expected json. It appears the test has thus far
passed by luck. E.g. I was able to make the test pass in the failing
environment by changing the meson buildtype from debugoptimized to debug.
When a VM config contains vnuma settings, libxlMakeVnumaList() checks if the
number of requested vnuma nodes exceeds the number of physical nodes. The
number of physical nodes is retrieved with libxl_get_physinfo(), which can
return wildly different results in the context of unit tests. This change
mocks libxl_get_physinfo() to return consistent results. All fields of the
libxl_physinfo struct are set to 0 except nr_nodes, which is set to 6 to
ensure the vnuma_hvm configuration is properly tested.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to the result parsing from xml, add the argument of
SGX EPC memory backend into QEMU command line.
$ qemu-system-x86_64 \
...... \
-object '{"qom-type":"memory-backend-epc","id":"memepc0","prealloc":true,"size":67108864,"host-nodes":[0,1],"policy":"bind"}' \
-object '{"qom-type":"memory-backend-epc","id":"memepc1","prealloc":true,"size":16777216,"host-nodes":[2,3],"policy":"bind"}' \
-machine sgx-epc.0.memdev=memepc0,sgx-epc.0.node=0,sgx-epc.1.memdev=memepc1,sgx-epc.1.node=1
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend hypervisor capabilities to include sgx feature. When available,
the hypervisor supports launching an VM with SGX on Intel platfrom.
The SGX feature tag privides additional details like section size and
sgx1 or sgx2.
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
JSON args for -netdev were added as precursor for adding the 'dgram'
network backend type. Enable the detection and update test cases using
DO_TEST_CAPS_LATEST.
Enabling the capability also ensures that the -netdev argument is
validated against the QAPI schema of 'netdev_add' which was already
implemented but not enabled.
The parser supporting JSON was added by qemu commit f3eedcddba3 and
enabled when adding stream/dgram netdevs in commit 5166fe0ae46.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
clang 14.0.5 complains:
../src/bhyve/bhyve_device.c:42:29: error: mixing declarations and code
is incompatible with standards before C99
[-Werror,-Wdeclaration-after-statement]
virDomainPCIAddressSet *addrs = opaque;
^
1 error generated.
And a few similar errors in some other places, mainly bhyve related.
Apply a trivial fix to resolve that.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-6.2 introduced support for the hv-avic enlightenment which allows
to use Hyper-V SynIC with hardware APICv/AVIC enabled.
Implement the libvirt support for it.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/402
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
cpu-data.py assumes that all "feature" nodes have exactly one child.
This assumption will no longer be true when the cpumap includes alias-
names for features.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.7.0-rc0~32^2~5 the .write-cache
attribute of virtio-blk dvice is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
The change in some .args is justified, because the qemuxml2argvdatatest
runs these test caseses with very minimalistic set of capabilities,
that's nowhere near real life scenario.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.9.0-rc0~48^2~25 the .share-rw
attribute of virtio-blk device is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
The change in controller-order.args is justified, because the
qemuxml2argvdatatest runs the test case with very minimalistic
set of capabilities, that's nowhere near real life scenario.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v4.2.0-rc0~23^2~4 the .failover
attribute of virtio-net device is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.9.0-rc0~162^2~10 the .host_mtu
attribute of virtio-net device is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.10.0-rc0~95^2~20 the
.tx_queue_size attribute of virtio-net device is always available
for all QEMU versions we support (4.2.0, currently). Therefore,
we can assume the capability is always set and thus doesn't need
to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
