Add new compress methods zlib and zstd for parallel migration,
these method should be used with migration option --comp-methods
and will be processed in 'qemuMigrationParamsSetCompression'.
Note that only one compress method could be chosen for parallel
migration and they cann't be used in compress migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Don't continue with the historical mistake and fix all internal
functions to use a sane type for flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers store only an 'unsigned int' in the field. Convert it to the
proper type including parser/formatter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flags will later be used to determine which parameters should
actually be applied.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Every running QEMU process we are willing to reconnect (i.e., at least
3.1.0) supports migration events and we can assume the capability is
already enabled since last time libvirt daemon connected to its monitor.
Well, it's not guaranteed though. If libvirt 1.2.17 or older was used to
start QEMU 3.1.0 or newer, migration events would not be enabled. And if
the user decides to upgrade libvirt from 1.2.17 to 8.4.0 while the QEMU
process is still running, they would not be able to migrate the domain
because of disabled migration events. I think we do not really need to
worry about this scenario as libvirt 1.2.17 is 7 years old while QEMU
3.1.0 was released only 3.5 years ago. Thus a chance someone would be
running such configuration should be fairly small and a combination with
upgrading 1.2.17 to 8.4.0 (or newer) with running domains should get it
pretty much to zero. The issue would disappear ff the ancient libvirt is
first upgraded to something older than 8.4.0 and then to the current
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The NBD connection for non-shared storage migration can have the same
issue regarding TLS certificate name match as the migration connection
itself.
Propagate the configured name also for the NBD connections.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1901394
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When return-path is enabled, QEMU on the source host won't report
completed migration until the destination QEMU sends a confirmation it
successfully loaded all data. Libvirt would detect such situation in the
Finish phase and report the error read from QEMU's stderr back to the
source, but using return-path could give use a bit better error
reporting with an earlier restart of vCPUs on the source.
The capability is only enabled when the connection between QEMU
processes on the source and destination hosts is bidirectional. In other
words, only when VIR_MIGRATE_TUNNELLED is not set, because our tunnel
only allows one-way communication from the source to the destination.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the migration capability flag and the propagation of the
corresponding mapping configuration. The mapping will be produced from
the bitmaps on disk depending on both sides of the migration and the
necessity to perform merges.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This allows:
a) migration without access to network
b) complete control of the migration stream
c) easy migration between containerised libvirt daemons on the same host
Resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that we no longer use any of the macros from this file, remove it.
This also removes a typo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keeping them with viralloc.h forcibly pulls in the other stuff from
viralloc.h into other header files. This in turn creates a mess
as more and more headers pull in the 'viral' header file.
If we want to make 'viralloc.h' omnipresent we should pick a different
approach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The VIR_MIGRATE_PARALLEL flag is implemented using QEMU's multifd
migration capability and the corresponding multifd-channels migration
parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For consistency, let's use the semicolon for all definitions.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This typed parameter for virDomainMigrate3 and virDomainMigrateToURI3
APIs may be used for setting maximum post-copy migration bandwidth.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far migration parameters were changed only at the beginning of
migration mostly via an automatic translation from flags and typed
parameters. We need to export a few more functions to support APIs which
may set migration parameters while migration is already running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt relies on being able to kill the destination domain and resume
the source one during migration until we called "cont" on the
destination. Unfortunately, QEMU automatically activates block devices
at the end of migration even when it's called with -S. This wasn't a big
issue in the past since the guest is not running and thus no data are
written to the block devices. However, when QEMU introduced its internal
block device locks, we can no longer resume the source domain once the
destination domain already activated the block devices (and thus
acquired all locks) unless the destination domain is killed first.
Since it's impossible to synchronize the destination and the source
libvirt daemons after a failed migration, QEMU introduced a new
migration capability called "late-block-activate" which ensures QEMU
won't activate block devices until it gets "cont". The only thing we
need to do is to enable this capability whenever QEMU supports it.
https://bugzilla.redhat.com/show_bug.cgi?id=1568407
QEMU commit implementing the capability: v2.12.0-952-g0f073f44df
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The alias of the secret for decrypting the TLS passphrase is useless
besides for TLS setup. Stop passing it around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to delete the non-existent TLS objects results in ugly error
messages in the log, which could easily confuse users. Let's avoid this
confusion by not trying to delete the objects if we were not asked to
enable TLS migration and thus we didn't created the objects anyway.
This patch restores the behavior to the state before "qemu: Reset all
migration parameters".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To be able to restore all migration parameters when libvirtd is
restarting during an active migration job, we need to store the original
values of all parameters (stored in priv->job.migParams) in the status
XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API is renamed as qemuMigrationParamsGetULL and it can be used with
any migration parameter stored as unsigned long long.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an always-on migration capability is supposed to be enabled on both
sides of migration, each side can only enable the feature if it is
enabled by the other side.
Thus the source host sends a list of supported migration capabilities in
the migration cookie generated in the Begin phase. The destination host
consumes the list in the Prepare phase and decides what capabilities can
be enabled when starting a QEMU process for incoming migration. Once
done the destination sends the list of supported capabilities back to
the source where it is used during the Perform phase to determine what
capabilities can be automatically enabled.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration capabilities may be enabled automatically, but only if
both sides of migration support them. Thus we need to be able transfer
the list of supported migration capabilities in migration cookie.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding support for new migration parameter requires a lot of places to
be changed (most likely by copy&paste engineering): new variables to
store the parameter value and the associated *_set bool, JSON formatter
and parser, XML formatter and parser (to be added soon), and the actual
code to set the parameter. It's pretty easy to forget about some of the
places which need to be updated and end up with incorrect support. The
goal of this patch is to let most of the places do their job without any
modifications when new parameters are added.
To achieve the goal, a new qemuMigrationParam enum is introduced and all
parameters are stored in an array indexed by the items of this enum.
This will also allow us to automatically set the migration parameters
which directly correspond to libvirt's typed parameters accepted by
virDomainMigrate* APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use this internal structure only in qemu_migration_params.c and change
other non-test users to use the high level qemuMigrationParams struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's separate the code which queries QEMU for migration parameters from
qemuMigrationParamsCheck into a dedicated function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By merging qemuMigrationAnyCompressionParse into
qemuMigrationParamsSetCompression we can drop the useless intermediate
qemuMigrationCompression structure and parse compression related typed
parameters and flags directly into qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since every parameter or capability set in qemuMigrationCompression
structure is now reflected in qemuMigrationParams structure, we can
replace qemuMigrationAnyCompressionDump with a new API which will work
on qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call this API explicitly in the migration code. We
can pass the compression parameters to qemuMigrationParamsFromFlags and
it can internally call qemuMigrationParamsSetCompression to apply them
to the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most migration capabilities are directly connected with
virDomainMigrateFlags so qemuMigrationParamsFromFlags can automatically
enable them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's just a tiny wrapper around qemuMigrationParamsSetCapability and
setting priv->job.postcopyEnabled is not something qemuMigrationParams
code should be doing anyway so let the callers do it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration parameters and capabilities are supposed to be set on
both sides of migration while others should only be set on one side. For
example, CPU throttling parameters make no sense on the destination and
they can be used even if the destination is too old to support them.
To make qemuMigrationParamsFromFlags more general and usable on both
sides of migration, we need to tell it what side it's been called on.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of checking each capability at the time we want to set it in
qemuMigrationParamsSetCapability we can check all of them at once in
qemuMigrationParamsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefer xbzrle-cache-size migration parameter over the special
migrate-set-cache-size QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Migration capabilities are closely related to migration parameters and
it makes sense to keep them in a single data structure. Similarly to
migration parameters the capabilities are all send to QEMU at once in
qemuMigrationParamsApply, all other APIs operate on the
qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All users of migration parameters are supposed to use APIs provided by
qemu_migration_params.c without having to worry about the internals.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new name is qemuMigrationParamsApply and it will soon become the
only API which will send all requested migration parameters and
capabilities to QEMU. All other qemuMigrationParams* APIs will just
operate on the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no real reason for qemuMigrationParamsEnableTLS to require the
callers to pass a valid virQEMUDriverConfigPtr, it can just call
virQEMUDriverGetConfig.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
