As explained earlier, 'mdevctl' can output nothing. Add a test
case to nodedevmdevctltest which covers this situation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The mdevctl-list-empty test case is there to test whether an
empty JSON array "[]" is handled correctly by mdevctl handling
code. Well, mdevctl can output both, an empty JSON array or no
output at all.
Therefore, rename "mdevctl-list-empty" test case to
"mdevctl-list-empty-array" which is more descriptive and also
frees up slot for actual empty output (handled in next commits).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This is brand new way of closing FDs before exec(). We need to
close all FDs except those we want to explicitly pass to avoid
leaking FDs into the child. Historically, we've done this by
either iterating over all opened FDs and closing them one by one
(or preserving them), or by iterating over an FD interval [2 ...
N] and closing them one by one followed by calling closefrom(N +
1). This is a lot of syscalls.
That's why Linux kernel developers introduced new close_from
syscall. It closes all FDs within given range, in a single
syscall. Since we keep list of FDs we want to preserve and pass
to the child process, we can use this syscall to close all FDs
in between. We don't even need to care about opened FDs.
Of course, we have to check whether the syscall is available and
fall back to the old implementation if it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Convert all cases using DO_TEST() to use DO_TEST_CAPS_LATEST() and
remove DO_TEST() to prevent further use.
Most of the changes are related to CPU being present in the output XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all tests using fake capabilities to use DO_TEST_CAPS_LATEST.
Note that rename detection in git didn't work too well here and the
files may not correspond.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device was removed in qemu-4.0 and is superseded by 'ivshmem-plain'
and 'ivshmem-doorbell'.
Always report error when the old version is used and drop the irrelevant
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upgrade the relevant test cases to use latest capabilities. Note that
the 'shmem' (ivshmem) device is no longer supported and will be dropped
later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've used QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as witness
that the topology must cover the maximum number ov vcpus. qemu started
to enforce this in qemu-2.5, thus we can now always do the check.
This change also requires aligning the topology in certain test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Finish the conversion of cases which didn't need any special
capabilities to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Version-lock the test to qemu-5.0.0 as it's the latest qemu that
supports 'vxhs' and thus the test can't use 'latest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output files from 'qemuxml2argvtest' may have the real capability
suffix e.g. 'pci-rom-disabled-invalid.x86_64-latest.xml' which would not
be detected as being invalid and thus causing a test failure.
Change the logic to find '-invalid.' so that we can properly use
'virschematest' with test cases using real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'disk-cdrom-empty-network-invalid' is a special case were the input
XML is invalid according to the schema, but after processing a valid XML
is produced.
This corner case doesn't play well with 'virschematest' which uses the
file suffix to determine whether the file is invalid.
Upcoming patch will change the 'virschematest' condition, which would
start detecting this XML as invalid.
Use the '-active'/'-inactive' suffix for the file, which is possible
with qemuxml2xmltest so that an upcoming patch will not cause test
failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all tests using the 'DO_TEST_NOCAPS' "fake" capability
invocation to use DO_TEST_CAPS_LATEST and remove the DO_TEST_NOCAPS
macro to prevent further use.
Most of the output file changes are related to default USB controller
type and the CPU becoming defined in the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no more tests depending on '/usr/bin/qemu-system-i386' thus we
don't have to carry the data any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the files using 'qemu-system-i386' to
'qemu-system-x86_64'. The 'cpu*' tests are done separately to emphasise
that there's no change in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert tests which use DO_TEST_NOCAPS in both tests and the
qemuxml2xml variant has a symlink back to the qemuxml2argv input file.
This is done to separate the conversion before a patch converts all
DO_TEST_NOCAPS variants in qemuxml2xmltest to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the emulator and architecture to x86_64, for all non-cpu related
test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At this point we setup the master key with all VMs, so this specific
test case no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the previous version of this negative test now passes,
create a new version that still triggers the intended failure.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that, after the recent changes, the test passes, its old
name is no longer accurate.
While at it, enable the xml2xml part for it as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to the way the information is stored by the XML parser, we've
had this quirk where specifying any information about the loader
or NVRAM would implicitly set its format to raw. That is,
<nvram>/path/to/guest_VARS.fd</nvram>
would effectively be interpreted as
<nvram format='raw'>/path/to/guest_VARS.fd</nvram>
forcing the use of raw format firmware even when qcow2 format
would normally be preferred based on the ordering of firmware
descriptors. This behavior can be worked around in a number of
ways, but it's fairly unintuitive.
In order to remove this quirk, move the selection of the default
firmware format from the parser down to the individual drivers.
Most drivers only support raw firmware images, so they can
unconditionally set the format early and be done with it; the
QEMU driver, however, supports multiple formats and so in that
case we want this default to be applied as late as possible,
when we have already ruled out the possibility of using qcow2
formatted firmware images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Keep things consistent by using the same file extension for the
generated NVRAM path as the NVRAM template.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the user included loader.readonly=no in the domain XML, we
should not pick a firmware build that expects to work with
loader.readonly=yes.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we only generate it after finding a matching entry
either among firmware descriptors or in the legacy firmware
list.
Even if the domain is configured to use a custom firmware build
that we know nothing about, however, we should still automatically
generate the NVRAM path instead of requiring the user to provide
it manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt doesn't really support the microvm machine type, but
it can parse the firmware descriptor just fine.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These are imported from Fedora 38's edk2 package.
The files that are being replaced date back to RHEL 7 and no
longer represent what libvirt is likely to encounter on an
actual production system.
Notably, the paths have all changed, with both x86_64 and
aarch64 builds now living under /usr/share/edk2 and the AAVMF
name being having been phased out.
Additionally, the 4MB qcow2 format builds have been introduced
on x86_64 and given high priority, effectively making qcow2
the default format across architectures.
The impact of these changes on the test suite is, predictably,
quite severe.
For the cases where paths to firmware files were explicitly
provided as part of the input, they have been adjusted so that
the modern paths are used instead of the legacy ones. Other
than that, input files have been left untouched.
The following expected changes can be seen in output files:
* where qcow2 firmware was used on x86_64, Secure Boot
support is now enabled;
* all ABI_UPDATE test cases for x86_64 now use qcow2
formatted firmware;
* test cases where legacy paths were manually provided
no longer get additional information about the firmware
added to the output XML.
Some of the changes described above highlight why, in order
to guarantee a stable guest ABI over time and regardless of
changes to the host's configuration, it was necessary to move
firmware selection from VM startup time to VM creation time.
In a few cases, updating the firmware descriptors changes the
behavior in a way that's undesired and uncovers latent bugs
in libvirt:
* firmware-manual-efi-secboot-legacy-paths ends up with
Secure Boot disabled, despite the input XML specifically
requesting it to be enabled;
* firmware-manual-efi-rw-modern-paths loses the
loader.readonly=no part of the configuration and starts
using an NVRAM file;
* firmware-manual-efi-nvram-template-nonstandard starts
failing altogether with a fairly obscure error message.
We're going to address all these issues with upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of these are just additional coverage, but a few demonstrate
bugs in libvirt:
* firmware-manual-efi-nvram-template-nonstandard sees the NVRAM
template path, which was explicitly provided in the XML,
being overridden by the firmware selection machinery;
* firmware-auto-efi-rw* and firmware-manual-efi-rw-legacy-paths
lose the loader.readonly=no setting and thus behave
differently than requested;
* firmware-manual-efi-loader-path-nonstandard fails because an
NVRAM path doesn't get generated.
We're going to address all these issues with upcoming changes.
Note that the firmware-auto-efi-nvram-template-nonstandard
failure is expected: firmware autoselection has been enabled, but
the NVRAM template points to a custom path that's not mentioned
in any of the firmware descriptors and so it can't succeed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new name better describes the test scenario and will fit
better with the additional tests that we're about to introduce.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the idea behind introducing the abi-update variant of
a test is showing that libvirt behaves differently based on
whether the configuration is for a newly-defined domain or an
existing one, we don't want the input files to ever go out of
sync.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
That's what we already use in almost all cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using the unversioned machine type means that firmware
descriptors can't be used to discover additional information
about the chosen firmware build.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Firmware selection is not relevant to these tests, so adopt
the most convenient approach.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have a number of tests that can benefit from this macro
instead of open-coding it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to v8.1.0-rc4
Notable changes:
- 'dirty-limit' migration feature added
- 'vcpu-dirty-limit', 'x-vcpu-dirty-limit-period' parameters added
- 'dirty-limit-ring-full-time', 'dirty-limit-throttle-time-per-round' statistics added
- migration statistic of number of skipped zero pages is now deprecated
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For historical reasons (i.e. unknown reason) we put channel
sockets into a path derived from cfg->libDir which is a path that
survives host reboots (e.g. /var/lib/libvirt/...). This is not
necessary and in fact for session daemon creates a longer prefix:
XDG_CONFIG_HOME -> /home/user/.config
XDG_RUNTIME_DIR -> /run/user/1000
Worse, if host is rebooted suddenly (e.g. due to power loss) then
we leave files behind and nobody will ever remove them.
Therefore, place the channel target dir into state dir.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2173980
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A <channel/> device is basically an UNIX socket into guest.
Whatever is sent from the host, appears in the guest and vice
versa. But because of that, the length of the path to the socket
is important (underscored by fact that we derive the path from
domain short name). But there are still cases where we might not
fit into UNIX_PATH_MAX limit (usually 108 characters), because
the path is derived also from other variables, e.g.
XDG_CONFIG_HOME for session domains.
There are two components though, that are needless: "/target/"
and "domain-" prefix. Drop them. This is safe to do, because
running domains have their path saved in status XML and even
though paths are dropped on migration, they are not part of guest
ABI and thus we are free to change them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are couple of variables that are declared at function
beginning but then used solely within a block (either for() loop
or if() statement). And just before their use they are zeroed
explicitly using memset(). Decrease their scope, use struct zero
initializer and drop explicit memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Now that we don't use it for probing at all we can remove all the
corresponding monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
