These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.
A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.
Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
Be sure to VIR_FREE(accel) and moved virDomainVideoDefFree() within no_memory
label to be consistent
Resolve resource leak in parallelsApplyIfaceParams() when the 'oldnet' is
allocated locally. Also virCommandFree(cmd) as necessary.
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Network adapters of type 'routed' is a special case. Other adapters
have 'network' parameter in prlctl's output instead.
Routed network adapters should be connected to 'routed' network
from libvirt's view.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels Cloud Server uses virtual networks model for network
configuration. It uses own tools for virtual network management.
So add network driver, which will be responsible for listing
virtual networks and performing different operations on them
(in consequent patched).
This patch only allows listing virtual network names, without
any parameters like DHCP server settings.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Allow changing network interfaces in domain configuration.
ifname is used as iterface identifier: if there is interface
with some ifname in old config and there are no interfaces with
such name in the new config - issue prlctl command to delete
the network interface. And vice versa - if interface with
some ifname exists only in new config - issue prlctl command
to create it.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parse network interfaces info from prlctl output.
Parallels Cloud Server uses virtual networks model for
network configuration: You can add network adapter to
VM and connect it to some predefined virtual network.
Fill type, mac, network name and linkstate fields of
virDomainNetDef structure.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
New VM will have default values for all parameters, like
cpu number, we have to change its configuration as provided
by xml definition, given to parallelsDomainDefineXML.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Implement creation of new disks - if a new disk found
in configuration, find a volume by disk path and
actually create a disk image by issuing prlctl command.
If it's successfully finished - remove the file with volume
definition.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add function for convertion bus from libvirt's numeric constant
to a name, used in a parallels command-line tools.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
There are no storage pools in Parallels Cloud Server -
All VM data stored in a single directory: config, snapshots,
memory dump together with disk images.
Let's look through list of VMs and create a storage pool for
each directory, containing VMs.
So if you have 3 vms: /var/parallels/vm-1.pvm,
/var/parallels/vm-2.pvm and /root/test.pvm - 2 storage pools
appear: -var-parallels and -root. xml descriptions of the pools
will be saved in /etc/libvirt/parallels-storage, so UUIDs will
not change netween connections to libvirt.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Allow changing some parameters of the hard disks: bus,
image and drive address.
Creating new disk devices and removing existing ones
require changes in the storage driver, so it will be
implemented later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.
Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.
Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.
N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Found this when building on RHEL5:
parallels/parallels_storage.c: In function 'parallelsStorageOpen':
parallels/parallels_storage.c:180: error: 'for' loop initial declaration used outside C99 mode
(and similar error in parallels_driver.c). This was in spite of
configuring with "-Wno-error".
Many parts of virDomainDefPtr were using 'int' variables as
array length counts. Replace all these with size_t and update
various format strings & API signatures to adapt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Add separate function parallelsCreateCt, which creates container.
Also add example xml configuration domain-parallels-ct-simple.xml.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Fix code, which checks what is changed in virDomainDef structure.
It looks slightly different for containers and VMs: containers haven't
boot devices, but have init path
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
User may set "unlimited" cpus for containers, which means to
take all available cpus on the node.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch makes parallelsLoadDomains to be able to load information
about containers. So functions, which return different information
and change state will work.
parallelsDomainDefineXML will be fixed in separate patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Do some cleanup of parallelsOpen, STREQ_NULLABLE can replace
a lot of checks.
Also fix error message to be VIR_ERR_INTERNAL_ERROR, the same
as in other drivers.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Let's change URI to parallels:///system. Parallels Server supports
creating VMs from non-privileged accounts, but it's not main usage
scenario and it may be forbidden in the future.
Also containers, which will be supported by the driver, can be managed
only by root, so /system path is more suitable for this driver.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Without this patch, the English phrase 'no name' would appear
literally within the remaining translated message.
* src/parallels/parallels_driver.c (parallelsCreateVm)
(parallelsDomainDefineXML): Tweak error message.
To create a new VM in Parallels Clud Server we should issue
"prlctl create" command, and give path to the directory,
where VM should be created. VM's storage will be in that
directory later. So in this first version find out location
of first VM's hard disk and create VM there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels Cloud Server has one serious discrepancy with libvirt:
libvirt stores domain configuration files in one place, and storage
files in other places (with the API of storage pools and storage volumes).
Parallels Cloud Server stores all domain data in a single directory,
for example, you may have domain with name fedora-15, which will be
located in '/var/parallels/fedora-15.pvm', and it's hard disk image will be
in '/var/parallels/fedora-15.pvm/harddisk1.hdd'.
I've decided to create storage driver, which produces pseudo-volumes
(xml files with volume description), and they will be 'converted' to
real disk images after attaching to a VM.
So if someone creates VM with one hard disk using virt-manager,
at first virt-manager creates a new volume, and then defines a
domain. We can lookup a volume by path in XML domain definition
and find out location of new domain and size of its hard disk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add parallelsDomainDefineXML function, it works only for existing
domains for the present.
It's too hard to convert libvirt's XML domain configuration into
Parallel's one, so I've decided to compare virDomainDef structures:
current domain definition and the one created from XML, given to
the function. And change only different parameters.
Currently only name, description, number of cpus, memory amount
and video memory can be changed.
Video device and console added, because libvirt supposes that
VM must always have one video device, if there are some
graphics and one console.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add support of collecting information about serial
ports. This change is needed mostly as an example,
support of other devices will be added later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels driver is 'stateless', like vmware or openvz drivers.
It collects information about domains during startup using
command-line utility prlctl. VMs in Parallels are identified by UUIDs
or unique names, which can be used as respective fields in
virDomainDef structure. Currently only basic info, like
description, virtual cpus number and memory amount, is implemented.
Querying devices information will be added in the next patches.
Parallels doesn't support non-persistent domains - you can't run
a domain having only disk image, it must always be registered
in system.
Functions for querying domain info have been just copied from
test driver with some changes - they extract needed data from
previously created list of virDomainObj objects.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.
More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
