When sending SIGHUP to libvirtd, it will trigger the virStateDriver
reload operation. This is intended to reload the configuration files
for guests. For unknown historical reasons this is also triggering
autostart of all guests. Autostart is generally expected to be
something that happens on OS startup. Starting VMs on SIGHUP will
violate that expectation and potentially cause dangerous scenarios
if the admin has explicitly shutdown a misbehaving VM that has
been marked as autostart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Even though qemu-kvm binaries can be used in TCG mode, libvirt would
only detect them if /dev/kvm was available. Thus, one would need to make
a /usr/bin/qemu symlink to be able to use TCG mode with qemu-kvm in an
environment without KVM support.
And even though QEMU is able to make use of KVM, libvirt would not
advertise KVM support unless there was a qemu-kvm symlink available.
This patch fixes both issues.
If QEMU supports the BALLOON_EVENT QMP event, then we can
avoid invoking 'query-balloon' when returning XML or the
domain info.
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h:
Add QEMU_CAPS_BALLOON_EVENT
* src/qemu/qemu_driver.c: Skip query-balloon in
qemudDomainGetInfo and qemuDomainGetXMLDesc if we have
QEMU_CAPS_BALLOON_EVENT set
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Check
for BALLOON_EVENT at connect to monitor. Add callback
for balloon change notifications
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h:
Add handling of BALLOON_EVENT and impl 'query-events'
check
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The s390(x) architecture doesn't feature a PCI bus. For the purpose of
supporting virtio devices a virtual bus called virtio-s390 is used.
A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
distinguish the virtio devices on s390 from PCI-based virtio devices.
V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This is in preparation of the enablement of s390 guests with virtio devices.
The assignment of device addresses happens in different places, i.e. the
qemu driver and process modules as well as in the unit tests in slightly
different flavors. Currently, these are PPC spapr-vio and PCI
devices, virtio-s390 (not PCI based) will follow.
By optionally passing to qemuDomainAssignAddresses the domain
object and the capabilities it is now possible to call the function
from most of the places (except for hotplug) where address assignment
is done.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:
if (strstr(def->emulator, "kvm")) {
def->virtType = VIR_DOMAIN_VIRT_KVM;
def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}
Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features
The only useful translation of "%s" as a format string is "%s" (I
suppose you could claim "%1$s" is also valid, but why bother). So
it is not worth translating; fixing this exposes some instances
where we were failing to translate real error messages. This makes
the fix of commit 097da1ab more generic, as well as ensuring no
future regressions.
* cfg.mk (sc_prohibit_useless_translation): New rule.
* src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
* src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
* src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.
Recently the Ceph project defaulted auth_supported from 'none' to 'cephx'.
When no auth information was set for Ceph disks this would lead to librados defaulting to
'cephx', but there would be no additional authorization information.
We now explicitly set auth_supported to none when passing down arguments to Qemu.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
QEMU domains were marked as having managed save image even if they were
saved using the regular save. With this patch, domains are marked so
only when using managed save API.
QEMU (and librbd) flush the cache on the source before the
destination starts, and the destination does not read any
changeable data before that, so live migration with rbd caching
is safe.
This makes 'virsh migrate' work with rbd and caching without the
--unsafe flag.
Reported-by: Vladimir Bashkirtsev <vladimir@bashkirtsev.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
virDomainBlockStatsFlags can't collect total_time_ns for read/write/flush
because of key typo when retriveing from qemu cmd result
Signed-off-by: lvroyce <lvroyce@linux.vnet.ibm.com>
Starting a KVM guest on s390 fails immediately. This is because
"qemu --help" reports -no-acpi even for the s390(x) architecture but
-no-acpi isn't supported there.
Workaround is to remove QEMU_CAPS_NO_ACPI from the capability set
after the version/capability extraction.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
If no 'listen' attribute or <listen> element is set in the
guest XML, the default driver configured listen address is
used. There is no way to client applications to determine
what this address is though. When starting the guest, we
should update the live XML to include this default listen
address
This patch adds support for listing all domains into drivers that use
the common virDomainObj implementation: libxl, lxc, openvz, qemu, test,
uml, vmware.
For drivers that don't support managed save images the guests are
treated as if they had none, so filtering guests that do have such an
image on this driver succeeds and produces 0 results.
The two new functions are very similar to the existing functions;
just a matter of different arguments and a call to a different
helper function.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Support new flags.
(qemuDomainListAllSnapshots): New functions.
Now that domain listing is a thin wrapper around child listing,
it's easier to have a common entry point. This restores the
hashForEach optimization lost in the previous patch when there
are no snapshots being filtered out of the entire list.
* src/conf/domain_conf.h (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListNum): Add parameter.
(virDomainSnapshotObjListGetNamesFrom)
(virDomainSnapshotObjListNumFrom): Delete.
* src/libvirt_private.syms (domain_conf.h): Drop deleted functions.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames):
Merge, and (re)add an optimization.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Update callers.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/conf/virdomainlist.c (virDomainListPopulate): Likewise.
This idea was first suggested by Daniel Veillard here:
https://www.redhat.com/archives/libvir-list/2011-October/msg00353.html
Now that I am about to add more complexity to snapshot listing, it
makes sense to avoid code duplication and special casing for domain
listing (all snapshots) vs. snapshot listing (descendants); adding
a metaroot reduces the number of code lines by having the domain
listing turn into a descendant listing of the metaroot.
Note that this has one minor pessimization - if we are going to list
ALL snapshots without filtering, then virHashForeach is more efficient
than recursing through the child relationships; restoring that minor
optimization will occur in the next patch.
* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Repurpose some fields.
(virDomainSnapshotDropParent): Drop unused parameter.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListCount): Simplify.
(virDomainSnapshotFindByName, virDomainSnapshotSetRelations)
(virDomainSnapshotDropParent): Match new field semantics.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Adjust clients.
This patch stores existence of the image in the object. At start of the
daemon the state is checked and then updated in key moments in domain
lifecycle.
With latest changes to qemu-ga success on some commands is not reported
anymore, e.g. guest-shutdown or guest-suspend-*. However, errors are
still being reported. Therefore, we need to find different source of
indication if operation was successful. Events.
Commit 6e769eba made it a runtime error if libvirt was compiled
without yajl support but targets a new enough qemu. But enough
users are hitting this on self-compiled libvirt that it is worth
erroring out at compilation time, rather than an obscure failure
when trying to use the built executable.
* configure.ac: If qemu is requested and -version works, require
yajl when qemu version is new enough.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Add
comment.
dump-guest-memory is a new dump mechanism, and it can work when the
guest uses host devices. This patch adds a API to use this new
monitor command.
We will always use json mode if qemu's version is >= 0.15, so I
don't implement the API for text mode.
Libvirt updates the configuration of SPICE server only when something
changes. This is unfortunate when the user wants to disconnect a
existing spice session when the connected attribute is already
"disconnect".
This patch modifies the conditions for calling the password updater to
be called when nothing changes, but the connected attribute is already
"disconnect".
While unescaping the commands the commands passed through to the monitor
function qemuMonitorUnescapeArg() initialized lenght of the input string
to strlen()+1 which is fine for alloc but not for iteration of the
string.
This patch fixes the off-by-one error and drops the pointless check for
a single trailing slash that is automaticaly handled by the default
branch of switch.
A core use case of the hook scripts is to be able to do things
to a guest's network configuration. It is possible to hook into
the 'start' operation for a QEMU guest which runs just before
the guest is started. The TAP devices will exist at this point,
but the QEMU process will not. It can be desirable to have a
'started' hook too, which runs once QEMU has started.
If libvirtd is restarted it will re-populate firewall rules,
but there is no QEMU hook to trigger for existing domains.
This is solved with a 'reconnect' hook.
Finally, if attaching to an external QEMU process there needs
to be an 'attach' hook script.
This all also applies to the LXC driver
* docs/hooks.html.in: Document new operations
* src/util/hooks.c, src/util/hooks.c: Add 'started', 'reconnect'
and 'attach' operations for QEMU. Add 'prepare', 'started',
'release' and 'reconnect' operations for LXC
* src/lxc/lxc_driver.c: Add hooks for 'prepare', 'started',
'release' and 'reconnect' operations
* src/qemu/qemu_process.c: Add hooks for 'started', 'reconnect'
and 'reconnect' operations
Currently, if qemuProcessStart fail at some point, e.g. because
domain being started wants a PCI/USB device already assigned to
a different domain, we jump to cleanup label where qemuProcessStop
is performed. This unconditionally calls virSecurityManagerRestoreAllLabel
which is wrong because the other domain is still using those devices.
However, once we successfully label all devices/paths in
qemuProcessStart() from that point on, we have to perform a rollback
on failure - that is - we have to virSecurityManagerRestoreAllLabel.
The two APIs are rather trivial; based on bits and pieces of other
existing APIs. It leaves the door open for future extension to
qemu to report snapshots without metadata based on reading qcow2
internal snapshot names.
* src/qemu/qemu_driver.c (qemuDomainSnapshotIsCurrent)
(qemuDomainSnapshotHasMetadata): New functions.
For pseries guest, spapr-vlan and spapr-vty is based
on spapr-vio address. According to model of network
device, the address type should be assigned automatically.
For serial device, serial pty device is recognized as
spapr-vty device, which is also on spapr-vio.
So this patch is to correct the address type of
spapr-vlan and spapr-vty, and build correct
command line of spapr-vty.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman<michaele@au1.ibm.com>
When libvirtd is started and there is an unusable/not-connectable
leftover from earlier started machine, it's more reasonable to say
that the machine "crashed" if we know it was started with
"-no-shutdown".
This patch fixes that and also changes the other result (when machine
was started without "-no-shutdown") to "unknown", because the previous
"failed" reason means (according to include/libvirt/libvirt.h.in:174),
that the machine failed to start.
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.
This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
The problem is that an interface with type='hostdev' will have an
alias of the form "hostdev%d", while the function that looks through
existing netdevs to determine the name to use for a new addition will
fail if there's an existing entry that does not match the form
"net%d".
This is another of the handful of places that need an exception due to
the hybrid nature of <interface type='hostdev'> (which is not exactly
an <interface> or a <hostdev>, but is both at the same time).
If we migrate to fd, spec->fwdType is not MIGRATION_FWD_DIRECT,
we will close spec->dest.fd.local in qemuMigrationRun(). So we
should set spec->dest.fd.local to -1 in qemuMigrationRun().
Bug present since 0.9.5 (commit 326176179).
==3240== 23 bytes in 1 blocks are definitely lost in loss record 242 of 744
==3240== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==3240== by 0x8077537: __vasprintf_chk (vasprintf_chk.c:82)
==3240== by 0x509C677: virVasprintf (stdio2.h:199)
==3240== by 0x509C733: virAsprintf (util.c:1912)
==3240== by 0x1906583A: qemudStartup (qemu_driver.c:679)
==3240== by 0x511991D: virStateInitialize (libvirt.c:809)
==3240== by 0x40CD84: daemonRunStateInit (libvirtd.c:751)
==3240== by 0x5098745: virThreadHelper (threads-pthread.c:161)
==3240== by 0x7953D8F: start_thread (pthread_create.c:309)
==3240== by 0x805FF5C: clone (clone.S:115)
