This function is no longer used anywhere except virDomainNetDefFree(),
so just inline its contents there.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of saving the interesting pieces of each existing NetDef,
clearing it, and then copying back the saved pieces after setting the
type to ethernet, just create a new NetDef, copy in the interesting
bits, and replace the old one. (The end game is to eliminate
virDomainNetDefClear() completely, since this is the only real use)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Take the easy way out and use typeof, because my life
is too short to spend it reading gendispatch.pl.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The former has been present since
commit f43798c27684ab925adde7d8acc34c78c6e50df8
Author: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu Jul 3 03:48:02 2008 -0700
tun: Allow GSO using virtio_net_hdr
and the latter since
commit bbb009941efaece3898910a862f6d23aa55d6ba8
Author: Jason Wang <jasowang@redhat.com>
Date: Wed Oct 31 19:45:59 2012 +0000
tuntap: introduce multiqueue flags
these are old enough that they can be assumed present in all Linux
platforms we support. The tap device creation code changed is specific
to Linux, with a separate impl for non-Linux platforms.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
I've found two files under qemuxml2xmloutdata/ that are the same
as in qemuxml2argvdata/. Replace them with symlinks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Check whether the alloc result is negative (which is
cannot happen with current code) to reduce churn in
the following commit.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use goto to jump over the ret = 0 assignment
as is usual in rest of the code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine structure has another (optional) attribute:
default-ram-id, which specifies the alias of the default RAM
object. While the alias is private, it can never change in order
to not break migration. QEMU uses the alias when allocating
regular, not NUMA memory. In order to switch to new command line
and maintain migration, save this ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The objects at @def and @mem pointers are only read and not
written. Make the arguments const to make that explicit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If a domain was using hugepages through memory-backend-file or
via -mem-path, we would turn prealloc on. But we are not doing
that for memory-backend-memfd. Fix this, because we need QEMU to
fully allocate hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If user specifies immediate memory allocation in the domain XML,
they want QEMU to fully allocate its memory. And if the memory
was allocated using plain '-m' then we would honour it. But, if a
memory backend is used, then we don't set the prealloc attribute
of the backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().
This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This originally started as bug 1595525 in which namespaces and
libusb used in QEMU were not playing nicely with each other. The
problem was that libusb built a cache of USB devices it saw
(which was a very limited set because of the namespace) and then
expected to receive udev events to keep the cache in sync. But
those udev events didn't come because on hotplug when we mknod()
devices in the namespace no udev event is generated. And what is
worse - libusb failed to open a device that wasn't in the cache.
Without going further into what the problem was, libusb added a
new API for opening USB devices that avoids using cache which
QEMU incorporated and exposes under "hostdevice" attribute.
What is even nicer is that QEMU uses qemu_open() for path
provided in the attribute and thus FD passing could be used.
Except qemu_open() expects so called FD sets instead of `getfd'
and these are not implemented in libvirt, yet.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1877218
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks whether "usb-host" device has "hostdevice"
attribute. This attribute allows us to specify full path to the
USB device ("/dev/bus/usb/$bus/$dev") but more importantly, since
QEMU uses qemu_open() for this attribute it allows us to pass
pre-opened FD and have QEMU not bother with opening the file at
all.
The attribute was added in v5.1.0-rc0~71^2~1 QEMU commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After v6.5.0-rc1~148 we started to rectify vCPU to guest NUMA
assignment - if there is a vCPU not assigned to any guest NUMA
node it is automatically assigned to node #0.
A month later I've made it possible to define guest NUMA nodes
without vCPUs (v6.6.0-rc1~250) - this is needed because of HMAT.
As a part of that I fixed all callers of
virDomainNumaGetNodeCpumask() (which returns a bitmap of vCPUs for
given node) to handle case when NULL is returned (i.e. no vCPUs
assigned to given node). But of course my patch was written
before aforementioned vCPU rectify patch but merged afterwards
and hence I missed the virDomainNumaFillCPUsInNode() caller.
And because we are dealing with a NULL pointer, of course this
leads to a crash. Just try to define a domain with at least two
NUMA nodes and no vCPU assignment to any of the nodes.
Fixes: a26f61ee0c
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1880289
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Mid-cycle caps resync. Notable change is that virtio-blk enables
multiqueue by default and the addition of
'calc-dirty-rate'/'query-dirty-rate' QMP commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a more descriptive name and move the verb to the end so that the
functions conform with the naming policy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is just one caller, inline the code. This also optimizes the code
as we no longer have to calculate length of the output XML as it's
actually stored in the buffer struct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need an empty cookie, so use qemuMigrationCookieNew instead of
qemuMigrationEatCookie with NULL/0 arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow direct use rather than going through qemuMigrationEatCookie with
NULL/0 arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move around some code so that we can get rid of the 'cleanup:' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a more descriptive name and move the verb to the end so that the
functions conform with the naming policy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't actually use this file. Change the disk type to 'file' so that
it works in qemu and add pre and post-blockdev invocations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Extract the validation of transient disk option. We support transient
disks in qemu under the following conditions:
- -blockdev is used
- the disk source is a local file
- the disk type is 'disk'
- the disk is not readonly
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Add overlays after the VM starts before we start executing guest code.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Remove the overlay if the disk was <transient/>. Note that even if we'd
forbid unplug of such a disk through the API, the disk can still be
ejected from the guest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Block migration when transient disk option is enabled to simplify the
handling of the overlay files.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
For now we disable disk hotplug of transient disk as it requires
creating an overlay prior to adding the frontend.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
