This patch fixes the bug where paused/running state is not
transmitted during migration. As a result, in the QEMU driver
for example the machine was always started on the destination
end.
In order to do so, just read the state and if it is appropriate and
set the VIR_MIGRATE_PAUSED flag.
* src/libvirt.c (virDomainMigrateVersion1, virDomainMigrateVersion2):
Automatically add VIR_MIGRATE_PAUSED when appropriate.
* src/xen/xend_internal.c (xenDaemonDomainMigratePerform): Give a nicer
error message when migration of paused domains is attempted.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
This makes a small change on the failed-migration path. Up to now,
all VMs that failed non-live migration after the "stop" command
were restarted. This must not be done when the VM was paused in
the first place.
* src/qemu/qemu_driver.c (qemudDomainMigratePerform): Do not restart
a paused VM that fails migration. Set paused state after "stop",
reset it after failure.
We don't use this method of reloading rules anymore, so we can just
kill the code.
This simplifies things a lot because we no longer need to keep a
table of the rules we've added.
* src/util/iptables.c: kill iptablesReloadRules()
Long ago we tried to use Fedora's lokkit utility in order to register
our iptables rules so that 'service iptables restart' would
automatically load our rules.
There was one fatal flaw - if the user had configured iptables without
lokkit, then we would clobber that configuration by running lokkit.
We quickly disabled lokkit support, but never removed it. Let's do
that now.
The 'my virtual network stops working when I restart iptables' still
remains. For all the background on this saga, see:
https://bugzilla.redhat.com/227011
* src/util/iptables.c: remove lokkit support
* configure.in: remove --enable-lokkit
* libvirt.spec.in: remove the dirs used only for saving rules for lokkit
* src/Makefile.am: ditto
* src/libvirt_private.syms, src/network/bridge_driver.c,
src/util/iptables.h: remove references to iptablesSaveRules
This is the expected behaviour, I think - reloading libvirtd should
be a subset of restarting it.
Note, we reload the rules after we've determined which networks
are active (because we only add the rules for active networks)
and before we start autostart networks (to avoid re-adding the
rules).
* src/network/bridge_driver.c: reload iptables rules on startup
Currently, when we add iptables rules, we keep them on a list so that
we can easily reload them on e.g. 'service libvirtd reload'.
However, we don't save this list to disk, so if libvirtd is restarted
we lose the ability to reload the rules.
The fix is simple - just re-add the damn things on reload.
Note, we delete the rules before re-adding them, just like the current
behaviour of iptRulesReload().
* src/network/bridge_driver.c: re-add the iptables rules on reload.
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
xen-unstable changesets 20321 and 20521 added support for
description in xend domain config. This patch extends that
support in xend backend.
* src/xen/xend_internal.c: add parse and output of domain description
The QEMU 0.10.0 release (and possibly other 0.10.x) has a bug where
it sometimes/often forgets to display the initial monitor greeting
line, soley printing a (qemu). This in turn confuses the text
console parsing because it has a '(qemu)' it is not expecting. The
confusion results in a negative malloc. Bad things follow.
This re-writes the text console handling to be more robust. The key
idea is that it should only look for a (qemu), once it has seen the
original command echo'd back. This ensures it'll skip the bogus stray
(qemu) with broken QEMUs.
* src/qemu/qemu_monitor.c: Add some (disabled) debug code
* src/qemu/qemu_monitor_text.c: Re-write way command replies
are detected
Since the monitor I/O is processed out of band from the main
thread(s) invoking monitor commands, the virDomainObj may be
deleted by the I/O thread. The qemuDomainObjBeginJob takes an
extra reference to protect against final deletion, but this
reference is released by the corresponding EndJob call. THus
after the EndJob call it may not be valid to reference the
virDomainObj any more. To allow callers to detect this, the
EndJob call is changed to return the remaining reference count.
* src/conf/domain_conf.c: Make virDomainObjUnref return the
remaining reference count
* src/qemu/qemu_driver.c: Avoid referencing virDomainObjPtr
after qemuDomainObjEndJob if it has been deleted.
Fix this warning, there is no need to use an intermediate,
different array pointer.
network.c: In function 'getIPv6Addr':
network.c:50: warning: dereferencing type-punned pointer will break strict-aliasing rules
* src/util/network.c: avoid an intermediary pointer cast
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
for reset, shutdown, poweroff and stop events. Add convenience
methods for emiting those events
With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table
* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
the EOF and disk secret callbacks with a callback table
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.
The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.
* src/conf/capabilities.h: Add callbacks for serializing private
state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
fields from virDomainObjPtr. Remove code that serialized
those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
char device config into qemuMonitorOpen directly.
The code to start CPUs executing has nothing todo with CPU
affinity masks, so pull it out of the qemudInitCpuAffinity()
method and up into qemudStartVMDaemon()
* src/qemu/qemu_driver.c: Pull code to start CPUs executing out
of qemudInitCpuAffinity()
The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in
* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Add a 'format' arg to qemuMonitorChangeMedia()
The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c
* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum
If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.
To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.
* src/qemu/qemu_driver.c: Hold a reference on the monitor while
executing commands, and only NULL-ify the priv->mon field when
the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
counting to handle safe deletion of monitor objects
configure: yajl: no
CC libvirt_util_la-json.lo
util/json.c:32:27: error: yajl/yajl_gen.h: No such file or directory
util/json.c:33:29: error: yajl/yajl_parse.h: No such file or directory
* src/util/json.c: remove the includes if yajl not configured in
This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc). There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.
This uses the YAJL library for parsing/formatting from
http://lloyd.github.com/yajl/
* src/util/json.h, src/util/json.c: Data structures and APIs
for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers
Some of the very useful calls for XML parsing provided by util/xml.[ch]
were not exported as private symbols. This patch fixes this.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Xen HVM guests with PV drivers end up with two network interfaces for
each configured interface. One of them being emulated by qemu and the
other one paravirtual. As this might not be desirable, the attached
patch provides a way for users to specify that only paravirtual network
interface should be presented to the guest.
The configuration was inspired by qemu/kvm driver, for which users can
specify model='virtio' to use paravirtual network interface.
The patch adds support for model='netfront' which results in
type=netfront instead of type=ioemu (or nothing for newer xen versions)
in guests native configuration. Xen's qemu ignores interfaces with
type != ioemu and only paravirtual network device will be seen in the
guest.
Four possible configuration scenarios follow:
- no model specified in domain's XML
- libvirt will behave like before this change; it will set
type=ioemu for HVM guests on xen host which is not newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU
- covered by existing tests
- PV guest, any model
- no functional change, model is passed as is (and ignored by the
hypervisor)
- covered by existing tests (e.g., *-net-e1000.*)
- HVM guest, model=netfront
- type is set to "netfront", model is not specified
- covered by new *-net-netfront.* tests
- HVM guest, model != netfront
- type is set to "ioemu", model is passed as is
- covered by new *-net-ioemu.* tests
The fourth scenario feels like a regression for xen newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU as users who had a model specified
in their guest's configuration won't see a paravirtual interface in
their guests any more. On the other hand, the reason for specifying a
model is most likely the fact that they want to use such model which
implies emulated interface. Users of older xen won't be affected at all
as their xen provides paravirtual interface regardless of the type used.
- src/xen/xend_internal.c: add netfront support for the xend backend
- src/xen/xm_internal.c: add netfront support for the XM serialization too
Also fixed serial port configuration which was broken due to recent
change in virDomainChrDef where targetType was newly added.
* src/Makefile.am: add new files
* src/vbox/vbox_driver.c: add case for version 3.1
* src/vbox/vbox_tmpl.c: refactor common patterns into macros, support for
version 3.1, serial port configuration fix
* src/vbox/vbox_CAPI_v3_1.h, src/vbox/vbox_V3_1.c: generated code
esxVMX_IndexToDiskName handles indices up to 701. This limit comes
from a mapping gap in virDiskNameToIndex:
sdzy -> 700
sdzz -> 701
sdaaa -> 728
sdaab -> 729
This line in virDiskNameToIndex causes this gap:
idx = (idx + i) * 26;
Fixing it by altering this line to:
idx = (idx + (i < 1 ? 0 : 1)) * 26;
Also add a new version of virIndexToDiskName that handles the inverse
mapping for arbitrary indices.
* src/esx/esx_vmx.[ch]: remove esxVMX_IndexToDiskName
* src/util/util.[ch]: add virIndexToDiskName and fix mapping gap
* tests/esxutilstest.c: update test to verify that the gap is fixed
* src/conf/domain_conf.c: don't call virDomainObjUnlock twice
* src/qemu/qemu_driver.c: relock driver lock if an error occurs in
qemuDomainObjBeginJobWithDriver, enter/exit monitor with driver
in qemudDomainSave
The instruction "See Makefile.am" in libvirt.private_syms
always makes me think that this file is autogenerated
and should not be touched manually. This patch spares
every reader of libvirt.private_syms the hassle of
reading Makefile.am before augmenting libvirt.private_syms.
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Commit 790f0b3057 causes the contents of
the names array to be freed even on success, resulting in no listing of
defined but inactive Xen domains.
Spotted by Jim Fehlig
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
The cpu_set_t type can only cope with NR_CPUS <= 1024, beyond this
it is neccessary to use alternate CPU_SET maps with a dynamically
allocated CPU map
* src/util/processinfo.c: Support new unlimited size CPU set type
* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
and virProcessInfoGetAffinity to internal drivers
0.7.3 was broken
* configure.in docs/news.html.in: release of 0.7.4
* configure.in libvirt.spec.in: require netcf >= 0.1.4
* src/Makefile.am: node_device/node_device_udev.h was missing from
NODE_DEVICE_DRIVER_UDEV_SOURCES breaking compilation on platforms with
udev
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.
* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
and qemu-kvm-0.11.0-rc2 regression tests
Erroneously included the sysfs_path and parent_sysfs_path elements in
the node device xml, they were not supposed to show up there
* src/conf/node_device_conf.c: remove the output of the 2 fields
I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs" Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.
* src/conf/node_device_conf.c src/conf/node_device_conf.h
src/node_device/node_device_driver.c src/node_device/node_device_hal.c
src/node_device/node_device_udev.c: remove devicePath from the
structure and use def->sysfs_path instead
The qemudStartVMDaemon() and several functions it calls use
the QEMU monitor. The QEMU driver is locked while this function
is executing, so it is rquired to release the driver lock and
reacquire it either side of issuing a monitor command. It
failed todo so, leading to deadlock
* qemu/qemu_driver.c: Release driver when in qemudStartVMDaemon
and things it calls
VMware uses two MAC address prefixes: 00:0c:29 and 00:50:56. The 00:0c:29
prefix is used for ESX server generated addresses. The 00:50:56 prefix is
split into two parts. MAC addresses above 00:50:56:3f:ff:ff are generated
by a vCenter. The rest of the 00:50:56 prefix can be assigned manually.
Any MAC address within the 00:0c:29 and 00:50:56 prefix can be specified
in a domain XML config and the driver will handle the details internally.
* src/esx/esx_vmx.c: fix MAC address formatting
* tests/xml2vmxdata/*: update test files accordingly
* docs/drivers.html.in: list the ESX driver
* docs/drvesx.html.in: the new ESX driver documentation
* docs/hvsupport.html.in: add the ESX driver to the matrix
* docs/index.html.in, docs/sitemap.html.in: list the ESX driver
* src/esx/esx_driver.c: fix and cleanup some comments
* src/xen/xen_hypervisor.c: xen-unstable changeset 19788 removed
MAX_VIRT_CPUS from public headers, breaking compilation of libvirt
on -unstable. Its semanitc was retained with XEN_LEGACY_MAX_VCPUS.
Ensure MAX_VIRT_CPUS is defined accordingly.
The QEMU monitor open method would not take a reference on
the virDomainObjPtr until it had successfully opened the
monitor. The cleanup code upon failure to open though would
call qemuMonitorClose() which would in turn decrement the
reference count. This caused the virDoaminObjPtr to be mistakenly
freed and then the whole driver crashes
* src/qemu/qemu_monitor.c: Fix reference counting in
qemuMonitorOpen
The HAL driver returns a fatal error code in the case where HAL
is not running. This causes the entire libvirtd daemon to quit
which isn't desirable. Instead it should simply disable the HAL
driver
* src/node_device/node_device_hal.c: Quietly disable HAL if it is
not running
Fixes https://launchpad.net/bugs/453335
* src/security/virt-aa-helper.c: suppress confusing and misleading
apparmor denied message when kvm/qemu tries to open a libvirt specified
readonly file (such as a cdrom) with write permissions. libvirt uses
the readonly attribute for the security driver only, and has no way
of telling kvm/qemu that the device should be opened readonly
Fixes https://launchpad.net/bugs/460271
* src/security/virt-aa-helper.c: require absolute path for dynamic added
files. This is required by AppArmor and conveniently prevents adding
tcp consoles to the profile
The wrong variable was being passed in with the LXC event callback
resulting in a later deadlock or crash
* src/lxc/lxc_driver.c: Pass 'vm' instead of 'driver' to event
callback
In the scenario where the cgroups were mounted but the
particular group did not exist, and the caller had not
requested auto-creation, the code would fail to return
an error condition. This caused the lxc_controller to
think the cgroup existed, and it then later failed when
attempting to use it
* src/util/cgroup.c: Raise an error if the cgroup path does not
exist
There is a race condition in HAL driver startup where the callback
can get triggered before we have finished startup. This then causes
a deadlock in the driver.
* src/node_device/node_device_hal.c: RElease driver lock before
registering DBus callbacks
If the virDomainDefPtr object has an 'id' of -1, then forcably
set the VIR_DOMAIN_XML_INACTIVE flag to ensure generated XML
does not include any cruft from the previously running guest
such as console PTY path, or VNC port.
* src/conf/domain_conf.c: Set VIR_DOMAIN_XML_INACTIVE if
def->id is -1. Replace checks for def->id == -1 with
check against flags & VIR_DOMAIN_XML_INACTIVE.
The capng_lock() call sets the SECURE_NO_SETUID_FIXUP and SECURE_NOROOT
bits on the process. This prevents the kernel granting capabilities to
processes with an effective UID of 0, or with setuid programs. This is
not actually what we want in the container init process. It should be
allowed to run setuid processes & keep capabilities when root. All that
is required is masking a handful of dangerous capabilities from the
bounding set.
* src/lxc/lxc_container.c: Remove bogus capng_lock() call.
* src/security/virt-aa-helper.c: get_definition() now calls the new
caps_mockup() function which will parse the XML for os.type,
os.type.arch and then sets the wordsize. These attributes are needed
only to get a valid virCapsPtr for virDomainDefParseString(). The -H
and -b options are now removed from virt-aa-helper (they weren't used
yet anyway).
* tests/virt-aa-helper-test: extend and fixes tests, chmod'ed 755
uses libpciaccess to provide human readable names for PCI vendor and
device IDs
* configure.in: add a requirement for libpciaccess >= 0.10.0
* src/Makefile.am: add the associated compilation flags and link
* src/node_device/node_device_udev.c: lookup the libpciaccess for
vendor name and product name based on their ids
* configure.in src/Makefile.am: remove the configuration check and
build instructions
* src/node_device/node_device_devkit.c: removed the module
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
removed references to the old backend
* src/conf/node_device_conf.h src/conf/node_device_conf.c: add specific
support for SCSI target in node device capabilities
* src/node_device/node_device_udev.c: add some extra detection code
when handling udev output
* configure.in: add new --with-udev, disabled by default, and requiring
libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
of fields in node device definitions, and an API to look them up,
remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
virBuildPath and virBuildPathInternal() function
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
VIR_ERR_MIGRATE_PERSIST_FAILED
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in
the enum and lists of virDomainDiskBus
* src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
The xenstore database sometimes has stale domain IDs which are not
present in the hypervisor anymore. Filter these out to avoid causing
confusion
* src/xen/xs_internal.c: Filter domain IDs against HV's list
* src/xen/xen_hypervisor.h, src/xen/xen_hypervisor.c: Add new
xenHypervisorHasDomain() method for checking ID validity
The xenUnifiedNumOfDomains and xenUnifiedListDomains methods work
together as a pair, so it is critical they both apply the same
logic. With the current mis-matched logic it is possible to sometimes
get into a state when you miss certain active guests.
* src/xen/xen_driver.c: Change xenUnifiedNumOfDomains ordering to
match xenUnifiedListDomains.
When running qemu:///system instance, libvirtd runs as root,
but QEMU may optionally be configured to run non-root. When
then saving a guest to a state file, the file is initially
created as root, and thus QEMU cannot write to it. It is also
missing labelling required to allow access via SELinux.
* src/qemu/qemu_driver.c: Set ownership on save image before
running migrate command in virDomainSave impl. Call out to
security driver to set save image labelling
* src/security/security_driver.h: Add driver APIs for setting
and restoring saved state file labelling
* src/security/security_selinux.c: Implement saved state file
labelling for SELinux
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
src/lxc/lxc_controller.c src/node_device/node_device_hal.c
src/openvz/openvz_conf.c src/qemu/qemu_driver.c
src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
src/storage/storage_backend_disk.c src/storage/storage_driver.c
src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
review and those are the fixes correcting the problems
Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.
* include/libvirt/virterror.h, src/util/virterror.c: Add new
VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
wait for acquiring the monitor job lock
QEMU monitor commands may sleep for a prolonged period of time.
If the virDomainObjPtr or qemu driver lock is held this will
needlessly block execution of many other API calls. it also
prevents asynchronous monitor events from being dispatched
while a monitor command is executing, because deadlock will
ensure.
To resolve this, it is neccessary to release all locks while
executing a monitor command. This change introduces a flag
indicating that a monitor job is active, and a condition
variable to synchronize access to this flag. This ensures that
only a single thread can be making a state change or executing
a monitor command at a time, while still allowing other API
calls to be completed without blocking
* src/qemu/qemu_driver.c: Release driver and domain lock when
running monitor commands. Re-add locking to disk passphrase
callback
* src/qemu/THREADS.txt: Document threading rules
Change the QEMU monitor file handle watch to poll for both
read & write events, as well as EOF. All I/O to/from the
QEMU monitor FD is now done in the event callback thread.
When the QEMU driver needs to send a command, it puts the
data to be sent into a qemuMonitorMessagePtr object instance,
queues it for dispatch, and then goes to sleep on a condition
variable. The event thread sends all the data, and then waits
for the reply to arrive, putting the response / error data
back into the qemuMonitorMessagePtr and notifying the condition
variable.
There is a temporary hack in the disk passphrase callback to
avoid acquiring the domain lock. This avoids a deadlock in
the command processing, since the domain lock is still held
when running monitor commands. The next commit will remove
the locking when running commands & thus allow re-introduction
of locking the disk passphrase callback
* src/qemu/qemu_driver.c: Temporarily don't acquire lock in
disk passphrase callback. To be reverted in next commit
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Remove
raw I/O functions, and a generic qemuMonitorSend() for
invoking a command
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Remove all low level I/O, and use the new qemuMonitorSend()
API. Provide a qemuMonitorTextIOProcess() method for detecting
command/reply/prompt boundaries in the monitor data stream
Use ssh keyfiles from the current user's home directory instead of trying
to use keyfiles from a hardcoded /home/user directory. Fallback to
username/password authentication if keyfiles are not available or keyfile
authentication failed.
Add reference counting on the virDomainObjPtr objects. With the
forthcoming asynchronous QEMU monitor, it will be neccessary to
release the lock on virDomainObjPtr while waiting for a monitor
command response. It is neccessary to ensure one thread can't
delete a virDomainObjPtr while another is waiting. By introducing
reference counting threads can make sure objects they are using
are not accidentally deleted while unlocked.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Add
virDomainObjRef/Unref APIs, remove virDomainObjFree
* src/openvz/openvz_conf.c: replace call to virDomainObjFree
with virDomainObjUnref
In preparation of the monitor I/O process becoming fully asynchronous,
it is neccessary to ensure all access to internals of the qemuMonitorPtr
object is protected by a mutex lock.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add mutex for locking
monitor.
* src/qemu/qemu_driver.c: Add locking around all monitor commands
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures
* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
Pass qemuMonitorPtr into all monitor APIs instead of the
virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
wrappers for all qemuMonitorXXX command APIs, calling into
qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Rename qemuMonitor -> qemuMonitorText & update to accept
qemuMonitorPtr instead of virDomainObjPtr
Decouple the monitor code from the virDomainDefPtr structure
by moving the disk encryption lookup code back into the
qemu_driver.c file. Instead provide a function callback to
the monitor code which can be invoked to retrieve encryption
data as required.
* src/qemu/qemu_driver.c: Add findDomainDiskEncryption,
and findVolumeQcowPassphrase. Pass address of the method
findVolumeQcowPassphrase into qemuMonitorOpen()
* src/qemu/qemu_monitor.c: Associate a disk
encryption function callback with the qemuMonitorPtr
object.
* src/qemu/qemu_monitor_text.c: Remove findDomainDiskEncryption
and findVolumeQcowPassphrase.
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c
* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
and freeing qemuDomainObjPrivate instances with the domain
capabilities. Remove the qemudDispatchVMEvent() watch since
I/O watches are now handled by the monitor code itself. Pass
a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
the 'qemuMonitor' object. Temporarily add new APIs
qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
to monitor instead of accessing the file handle directly.
The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.
* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor
* src/util/threads-pthread.c: pthreads APIs do not set errno, instead
the return value is the positive errno. Set errno based on the return
value in the wrappers
* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct
opaque to callers of the API. Add accessor methods for managing
devices in the list
* src/qemu/qemu_driver.c: Update to use APIs instead of directly
accessing pciDeviceList fields
As it was basically unimplemented and more confusing than useful
at the moment.
* src/libvirt_private.syms: remove from internal symbols list
* src/qemu/qemu_bridge_filter.c src/util/ebtables.c: remove code and
one use of the unimplemented function
In case of an error the domains hash and the driver mutex may leak.
* src/opennebula/one_driver.c: free/destroy domains hash and driver
mutex in error cases
- Make reading ID from file working for IDs > 127
- Fix inverse error check for writing ID to file
- Use feof() to distinguish EOF from real error of fread()
- Don't interpret libssh2 error codes as number of bytes
phypNumDomainsGeneric() and phypListDomainsGeneric() return 0 in case
of an error. This makes it impossible to distinguish between an actual
error and no domains being defined on the hypervisor. It also turn the
no domains situation into an error. Return -1 in case of an error to
fix this problem.
* src/network/bridge_driver.c: when exec'ing dnsmaq, if there are
DHCP ranges defined, then compute and pass the --dhcp-lease-max
deriving the maximum number of leases
* src/conf/network_conf.h: extend the structure to store the range
* src/conf/network_conf.c: before adding a range parse the IP addresses
do some checking and keep the size
* src/internal.h (ATTRIBUTE_SENTINEL): New, it's a ggc feature and
protected as such
* src/util/buf.c (virBufferStrcat): Use it.
* src/util/ebtables.c (ebtablesAddRemoveRule): Use it.
* src/util/iptables.c (iptableAddRemoveRule: Use it.
* src/util/qparams.h (new_qparam_set, append_qparams): Use it.
* docs/apibuild.py: avoid breaking the API generator with that new
internal keyword macro
* include/libvirt/virterror.h src/util/virterror.c: add a new error
VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
and cleanup a number of parsing return error values.
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
A character device's target (it's interface in the guest) had only a
single property: port. This patch is in preparation for adding targets
which require other properties.
Since this changes the conf type for character devices this affects
a number of drivers:
* src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c
src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c:
target properties are moved into a union in virDomainChrDef, and a
targetType field is added to identify which union member should be
used. All current code which touches a virDomainChrDef is updated both
to use the new union field, and to populate targetType if necessary.
Current implementation of lxc driver creates vethN named
interface(s) in the host and passes as it is to a container.
The reason why it doesn't use ethN is due to the limitation
that one namespace cannot have multiple iterfaces that have
an identical name so that we give up creating ethN named
interface in the host for the container.
However, we should be able to allow the container to have
ethN by changing the name after clone(CLONE_NEWNET).
* src/lxc/lxc_container.c src/lxc/veth.c src/lxc/veth.h: do the clone
and then renames interfaces eth0 ... ethN to keep the interface names
familiar in the domain
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
src/lxc/veth.c: most of cleanups are just capitalizing their messages
though, some fixes wrong error messages and awkward indentations, and
improves error messages.
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
* configure.in: look for ebtables binary location if present
* src/Makefile.am: add the new module
* src/util/ebtables.[ch]: new module and internal APIs around
the ebtables binary
* src/libvirt_private.syms: export the symbols only internally
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.
Changes from v1:
Drop the driver wrappers around virGetHostname. This means we still need
to keep the new conn argument to virGetHostname, but I think it's worth
it.
This patch updates the xml parsing and formatting, and the associated
virInterfaceDef data structure to support IPv6, along the way adding
support for multiple protocols per interface, and multiple IP
addresses per protocol.
* src/conf/interface_conf.[ch]: update the structures, code for parsing
and serialization
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
The minimal XML returned from ncf_if_xml_state() doesn't contain this
attribute (which makes no sense in the case of reporting current
status of the interface), and it was preventing it from passing
through the parse/format step.
* src/conf/interface_conf.[ch]: add a new virInterfaceStartMode value
and modify loading/saving accordingly
There are places where an interface will not have a mac address, and netcf
returns this as a NULL pointer rather than a pointer to an empty string.
Rather than checking for this all over the place in libvirt, just save it
in the virInterface object as an empty string.
* src/datatypes.c: allow NULL mac in virGetInterface()
introduced on commit 9231aa7d95
* src/qemu/qemu_driver.c: in qemudRemoveDomainStatus fix a reference
to an undefined variable buf and free up an allocated string
When building with --disable-nls, I got a few messages like this:
storage/storage_backend.c: In function 'virStorageBackendCreateQemuImg':
storage/storage_backend.c:571: warning: format not a string literal and no format arguments
Fix these up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
qemudShutdownVMDaemon() calls qemudRemoveDomainStatus(), which
then calls virFileDeletePID(). qemudShutdownVMDaemon() then
unnecessarily calls virFileDeletePID() again. Remove this second
usage of it, and also slightly refactor qemudRemoveDomainStatus()
to VIR_WARN appropriate error messages.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The LXC driver was mistakenly returning -1 for lxcStartup()
in scenarios that are not an error. This caused the libvirtd
to quit for unprivileged users. This fixes the return code
of LXC driver, and also adds a "name" field to the virStateDriver
struct and logging to make it easier to find these problems
in the future
* src/driver.h: Add a 'name' field to state driver to allow
easy identification during failures
* src/libvirt.c: Log name of failed driver for virStateInit
failures
* src/lxc/lxc_driver.c: Don't return a failure code for
lxcStartup() if LXC is not available on this host, simply
disable the driver.
* src/network/bridge_driver.c, src/node_device/node_device_devkit.c,
src/node_device/node_device_hal.c, src/opennebula/one_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/secret/secret_driver.c, src/storage/storage_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name
field in virStateDriver struct
If an error occurs between the allocation of an item and appending it
to the list, the item leaks. Free such orphaned items in error cases.
* src/esx/esx_vi.c: free orphaned items in error cases
The default transport for the VI API is HTTPS. If the server redirects
from HTTPS to HTTP the driver would silently follow that redirection.
The user assumes to communicate with the server over a secure transport
but isn't.
This patch disables automatical redirection following. The driver reports
an error if the server tries to redirect.
* src/esx/esx_vi.c: refactor the call to curl_easy_perform() into a
function and do error handling there, disable automatical redirection
following for curl
* src/esx/esx_vi.h: change the type of responseCode to int
Unified function naming scheme:
- 'lookup' functions query the ESX or vCenter for information
- 'get' functions return information from a local object
* src/esx/esx_driver.c, src/esx/esx_vi.[ch]: unify function naming
In order to register a new virtual machine the ESX driver needs to upload
a VMX file to a datastore. Try to put this file beside the main VMDK file
of the virtual machine. Change the disk selection for datastore detection
to choose the first file-based harddisk instead of just the first disk.
The first disk may be a CDROM disk and ISO images are normaly not located
in the virtual machine's directory.
* src/esx/esx_driver.c: change disk selection for datastore detection
This allows to use domain-xml-from-native with VMX files that reference
unavailable datastores.
* src/esx/esx_vmx.c: fallback to the preliminary name if the datastore
cannot be found
Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/interface_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/lxc/lxc_driver.c,
src/network/bridge_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
renamed APIs.
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
The virDomainObjPtr object stores state about a running domain.
This object is shared across all drivers so it is not appropriate
to include driver specific state here. This patch adds the ability
to request a blob of private data per domain object instance. The
driver must provide a allocator & deallocator for this purpose
THis patch abuses the virCapabilitiesPtr structure for storing the
allocator/deallocator callbacks, since it is already being abused
for other internal things relating to parsing. This should be moved
out into a separate object at some point.
* src/conf/capabilities.h: Add privateDataAllocFunc and
privateDataFreeFunc fields
* src/conf/domain_conf.c: Invoke the driver allocators / deallocators
when creating/freeing virDomainObjPtr instances.
* src/conf/domain_conf.h: Pass virCapsPtr into virDomainAssignDef
to allow access to the driver specific allocator function
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
change in virDomainAssignDef contract
__in6_u.__u6_addr16 is the private name for this struct member,
s6_addr16 is the public one
* src/util/network.c: dont use the private field, but the public one.
John Levon raised the issue that remoteIOEventLoop() poll call was
reissued after EINTR was caught making it uninterruptible.
* src/remote/remote_driver.c: catch EAGAIN instead as suggested by
Richard Jones
The current virDomainObjListPtr object stores domain objects in
an array. This means that to find a particular objects requires
O(n) time, and more critically acquiring O(n) mutex locks.
The new impl replaces the array with a virHashTable, keyed off
UUID. Finding a object based on UUID is now O(1) time, and only
requires a single mutex lock. Finding by name/id is unchanged
in complexity.
In changing this, all code which iterates over the array had
to be updated to use a hash table iterator function callback.
Several of the functions which were identically duplicating
across all drivers were pulled into domain_conf.c
* src/conf/domain_conf.h, src/conf/domain_conf.c: Change
virDomainObjListPtr to use virHashTable. Add a initializer
method virDomainObjListInit, and rename virDomainObjListFree
to virDomainObjListDeinit, since its not actually freeing
the container, only its contents. Also add some convenient
methods virDomainObjListGetInactiveNames,
virDomainObjListGetActiveIDs and virDomainObjListNumOfDomains
which can be used to implement the correspondingly named
public API entry points in drivers
* src/libvirt_private.syms: Export new methods from domain_conf.h
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_conf.c, src/openvz/openvz_driver.c,
src/qemu/qemu_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c: Update all code
to deal with hash tables instead of arrays for domains
We need to parse a source XML block for FindPoolSources, so this is a step
in sharing the parsing. The new storage pool XML 2 XML tests cover this area
pretty well to ensure we aren't causing regressions.
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
In xenInotifyXendDomainsDirLookup() the wrong UUID variable is used
to search in the config info list.
In xenInotifyEvent() the event is dispatched if it's NULL.
Both were introduced in bc898df2c7.
We should always be using virGetHostname in place of
gethostname; thus add in a new syntax-check rule to make
sure no new uses creep in.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
We can slightly tighten up the regex's used to detect the use of
nonreentrant functions. We can also check src/util/virterror.c
by modifying a comment; I think it's worth it to get the additional
coverage.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
