Commit Graph

240 Commits

Author SHA1 Message Date
Jiri Denemark
a6f88cbd2d cpu: Optionally forbid fallback CPU models
In case a hypervisor doesn't support the exact CPU model requested by a
domain XML, we automatically fallback to a closest CPU model the
hypervisor supports (and make sure we add/remove any additional features
if needed). This patch adds 'fallback' attribute to model element, which
can be used to disable this automatic fallback.
2012-01-17 11:39:19 +01:00
Osier Yang
a5f8a01abb docs: Add missed RNG schema for interface
We support <interface> of type "mcast", "server", and "client",
but the RNG schema for them are missed. Attribute "address" is
optional for "server" type. And these 3 types support
<mac address='MAC'/>, too.
2012-01-17 17:09:47 +08:00
Osier Yang
487bdbd8e0 docs: Expose alias tag in domain RNG schema
Though <alias> is ignored when defining a domain, it can cause
failure if one validates (e.g. virt-xml-validate) the XML dumped
from a running domain. This patch expose it in domain RNG schema
for all the devices which support it.
2012-01-16 19:53:54 +08:00
Osier Yang
4447d2cbdf docs: Add readonly to filesystem RNG schema
"<readonly/>" is supported by filesystem XML, and also documented.
2012-01-16 19:53:44 +08:00
Michael Ellerman
8611d9c3d8 Make drive unit attribute optional in the XML schema
The "unit" attribute of a drive address is optional in the code, so should
also be in the XML schema.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2012-01-13 15:12:06 -07:00
Paolo Bonzini
c9abfadf37 qemu: add virtio-scsi controller model
Adding a new model for virtio-scsi roughly follows the same scheme
as the previous patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-01-13 14:54:48 -07:00
Paolo Bonzini
7b345b69f2 qemu: add ibmvscsi controller model
KVM will be able to use a PCI SCSI controller even on POWER.  Let
the user specify the vSCSI controller by other means than a default.

After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-01-13 14:13:30 -07:00
Osier Yang
5edfcaae6f qemu: Support copy on read for disk
The new introduced optional attribute "copy_on_read</code> controls
whether to copy read backing file into the image file. The value can
be either "on" or "off". Copy-on-read avoids accessing the same backing
file sectors repeatedly and is useful when the backing file is over a
slow network. By default copy-on-read is off.
2012-01-13 10:08:15 +08:00
Shradha Shah
b01b53de3f Adding the element pf to network xml.
This element will help the user to just specify the SR-IOV physical
function in order to access all the Virtual functions attached to it.
2012-01-11 13:10:21 -07:00
Stefan Berger
80e9a5cd4c Introduce possibility to have an iterator per variable
This patch introduces the capability to use a different iterator per
variable.

The currently supported notation of variables in a filtering rule like

  <rule action='accept' direction='out'>
     <tcp  srcipaddr='$A' srcportstart='$B'/>
  </rule>

processes the two lists 'A' and 'B' in parallel. This means that A and B
must have the same number of 'N' elements and that 'N' rules will be 
instantiated (assuming all tuples from A and B are unique).

In this patch we now introduce the assignment of variables to different
iterators. Therefore a rule like

  <rule action='accept' direction='out'>
     <tcp  srcipaddr='$A[@1]' srcportstart='$B[@2]'/>
  </rule>

will now create every combination of elements in A with elements in B since
A has been assigned to an iterator with Id '1' and B has been assigned to an
iterator with Id '2', thus processing their value independently.

The first rule has an equivalent notation of

  <rule action='accept' direction='out'>
     <tcp  srcipaddr='$A[@0]' srcportstart='$B[@0]'/>
  </rule>
2012-01-11 06:42:37 -05:00
Laine Stump
177db08775 qemu: add new disk device='lun' for bus='virtio' & type='block'
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.

As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.

device='lun' is identical to the default device='disk', except that:

1) It is only allowed if bus='virtio', type='block', and the qemu
   version is "new enough" to support it ("new enough" == qemu 0.11 or
   better), otherwise the domain will fail to start and a
   CONFIG_UNSUPPORTED error will be logged).

2) The option "scsi=on" will be added to the -device arg to allow
   SG_IO commands (if device !='lun', "scsi=off" will be added to the
   -device arg so that SG_IO commands are specifically forbidden).

Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.

*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
 add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter

*src/qemu/qemu_(command|driver|hotplug).c - treat
 VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
 VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.

Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
2012-01-09 10:55:53 -05:00
Jiri Denemark
88ed9ec001 schemas: Allow '.' in CPU feature name
We already support CPU features with '.' in their name (e.g., sse4.1) so
we should not forbid that in the schema.
2012-01-04 13:29:43 +01:00
Michal Novotny
973af2362c Implement DNS SRV record into the bridge driver
Hi,
this is the fifth version of my SRV record for DNSMasq patch rebased
for the current codebase to the bridge driver and libvirt XML file to
include support for the SRV records in the DNS. The syntax is based on
DNSMasq man page and tests for both xml2xml and xml2argv were added as
well. There are some things written a better way in comparison with
version 4, mainly there's no hack in tests/networkxml2argvtest.c and
also the xPath context is changed to use a simpler query using the
virXPathInt() function relative to the current node.

Also, the patch is also fixing the networkxml2argv test to pass both
checks, i.e. both unit tests and also syntax check.

Please review,
Michal

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2012-01-02 23:05:55 +08:00
Eric Blake
6cb4acce8b seclabel: extend XML to allow per-disk label overrides
When doing security relabeling, there are cases where a per-file
override might be appropriate.  For example, with a static label
and relabeling, it might be appropriate to skip relabeling on a
particular disk, where the backing file lives on NFS that lacks
the ability to track labeling.  Or with dynamic labeling, it might
be appropriate to use a custom (non-dynamic) label for a disk
specifically intended to be shared across domains.

The new XML resembles the top-level <seclabel>, but with fewer
options (basically relabel='no', or <label>text</label>):

<domain ...>
  ...
  <devices>
    <disk type='file' device='disk'>
      <source file='/path/to/image1'>
        <seclabel relabel='no'/> <!-- override for just this disk -->
      </source>
      ...
    </disk>
    <disk type='file' device='disk'>
      <source file='/path/to/image1'>
        <seclabel relabel='yes'> <!-- override for just this disk -->
          <label>system_u:object_r:shared_content_t:s0</label>
        </seclabel>
      </source>
      ...
    </disk>
    ...
  </devices>
  <seclabel type='dynamic' model='selinux'>
    <baselabel>text</baselabel> <!-- used for all devices without override -->
  </seclabel>
</domain>

This patch only introduces the XML and documentation; future patches
will actually parse and make use of it.  The intent is that we can
further extend things as needed, adding a per-device <seclabel> in
more places (such as the source of a console device), and possibly
allowing a <baselabel> instead of <label> for labeling where we want
to reuse the cNNN,cNNN pair of a dynamically labeled domain but a
different base label.

First suggested by Daniel P. Berrange here:
https://www.redhat.com/archives/libvir-list/2011-December/msg00258.html

* docs/schemas/domaincommon.rng (devSeclabel): New define.
(disk): Use it.
* docs/formatdomain.html.in (elementsDisks, seclabel): Document
the new XML.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-dynamic-override.xml:
New test, to validate RNG.
2011-12-30 10:57:58 +08:00
Eric Blake
116d6af979 schema: rewrite seclabel rng to match code
The RNG for <seclabel> was too strict - if it was present, then it
had to have sub-elements, even if those didn't make sense for the
given attributes.  Also, we didn't have any tests of <seclabel>
parsing or XML output.

In this patch, I added more parsing tests than output tests (since
the output populates and/or reorders fields not present in certain
inputs).  Making the RNG reliable is a precursor to using <seclabel>
variants in more places in the XML in later patches.

See also:
http://berrange.com/posts/2011/09/29/two-small-improvements-to-svirt-guest-configuration-flexibility-with-kvmlibvirt/

* docs/schemas/domaincommon.rng (seclabel): Tighten rules.
* tests/qemuxml2argvtest.c (mymain): New tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*.*: New files.
2011-12-30 10:38:37 +08:00
Bharata B Rao
4ba56a9410 Add New address type spapr-vio to domain.rng
Original patch by Bharata. Updated to use {1,16} in spaprvioReg based
on example from Eric Blake.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2011-12-20 16:01:25 -07:00
Eric Blake
dad3c2090d network: allow '-' in model name
In QEMU PPC64 we have a network device called "spapr-vlan". We can specify
this using the existing syntax for network devices, however libvirt
currently rejects "spapr-vlan" in virDomainNetDefParseXML() because of
the "-". Fix the code to accept "-".

* src/conf/domain_conf.c (virDomainNetDefParseXML): Allow '-' in
model name, and be more efficient.
* docs/schemas/domaincommon.rng: Limit valid model names to match code.
Based on a patch by Michael Ellerman.
2011-12-09 13:02:45 -07:00
Bharata B Rao
608786fc52 Add ppc64 specific definitions to domain.rng
ppc64 as new arch type and pseries as new machine type are
added under <os> ...  </os>.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
2011-12-08 08:39:26 -05:00
Osier Yang
cc17f09246 npiv: Expose fabric_name outside
This patch is to expose the fabric_name of fc_host class, which
might be useful for users who wants to known which fabric the
(v)HBA connects to.

The patch also adds the missed capabilities' XML schema of scsi_host,
(of course, with fabric_wwn added), and update the documents
(docs/formatnode.html.in)
2011-12-07 18:42:08 +08:00
Lei Li
6df7ccb10e Support block I/O throttle in XML
Enable block I/O throttle for per-disk in XML, as the first
per-disk IO tuning parameter.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:09 -07:00
Daniel P. Berrange
ae5e55289d Fix capabilities XML to use generic terms for suspend targets
The capabilities XML uses the x86 specific terms 'S3', 'S4'
and 'Hybrid-Syspend'. Switch it to use the same terminology
as the API constants and virsh options, eg 'suspend_mem'
'suspend_disk' and 'suspend_hybrid'

* docs/formatcaps.html.in, docs/schemas/capability.rng,
  src/conf/capabilities.c: Rename suspend constants
2011-11-30 10:12:29 +00:00
Hu Tao
6ac81c8ec8 blkiotune: add interface for blkiotune.device_weight
This adds per-device weights to <blkiotune>.  Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:

<domain ...>
  <blkiotune>
    <device>
      <path>/path/to/block</path>
      <weight>1000</weight>
    </device>
  </blkiotune>
..

This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it.  All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-29 12:26:21 -07:00
Srivatsa S. Bhat
302743f177 Add 'Hybrid-Suspend' power management discovery for the host
Some systems support a feature known as 'Hybrid-Suspend', apart from the
usual system-wide sleep states such as Suspend-to-RAM (S3) or Suspend-to-Disk
(S4). Add the functionality to discover this power management feature and
export it in the capabilities XML under the <power_management> tag.
2011-11-29 17:29:16 +08:00
Lorin Hochstein
8078a90a24 conf: make virt-xml-validate work with vbox domains
virt-xml-validate fails when run on a domain XML file of type 'vbox'.

For failing test case, see https://bugzilla.redhat.com/show_bug.cgi?id=757097

This patch updates the XML schema to accept all valid hypervisor
types, as well as dropping hypervisor types that are not in use
by the current code base.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-28 09:16:07 -07:00
Stefan Berger
ba3bf00acf Add support for STP filtering
This patch adds support for filtering of STP (spanning tree protocol) traffic
to the parser and makes us of the ebtables support for STP filtering. This code
now enables the filtering of traffic in chains with prefix 'stp'.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-22 15:12:03 -05:00
Stefan Berger
af37ce3dc7 Add a 'mac' chain
With hunks borrowed from one of David Steven's previous patches, we now
add the capability of having a 'mac' chain which is useful to filter
for multiple valid MAC addresses.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-22 15:12:03 -05:00
Srivatsa S. Bhat
e352b16400 Export KVM Host Power Management capabilities
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.

The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.

However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.

To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
2011-11-22 11:31:22 +08:00
Stefan Berger
8047c4bffa Add support for VLAN filtering
This patch adds support for filtering of VLAN (802.1Q) traffic to the
parser and makes us of the ebtables support for VLAN filtering. This code
now enables the filtering of traffic in chains with prefix 'vlan'.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-19 07:26:56 -05:00
Stefan Berger
8951328619 Extend NWFilter parameter parser to cope with lists of values
This patch modifies the NWFilter parameter parser to support multiple
elements with the same name and to internally build a list of items.
An example of the XML looks like this:

        <parameter name='TEST' value='10.1.2.3'/>
        <parameter name='TEST' value='10.2.3.4'/>
        <parameter name='TEST' value='10.1.1.1'/>

The list of values is then stored in the newly introduced data type
virNWFilterVarValue.

The XML formatter is also adapted to print out all items in alphabetical
order sorted by 'name'.

This patch also fixes a bug in the XML schema on the way.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-18 11:58:18 -05:00
Stefan Berger
ea7c73a76f Enable chains with names having a known prefix
This patch enables chains that have a known prefix in their name.
Known prefixes are: 'ipv4', 'ipv6', 'arp', 'rarp'. All prefixes
are also protocols that can be evaluated on the ebtables level.

Following the prefix they will be automatically connected to an interface's
'root' chain and jumped into following the protocol they evaluate, i.e.,
a table 'arp-xyz' will be accessed from the root table using

ebtables -t nat -A <iface root table> -p arp -j I-<ifname>-arp-xyz

thus generating a 'root' chain like this one here:

Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT
-p IPv4 -j O-vnet0-ipv4
-p ARP -j O-vnet0-arp
-p 0x8035 -j O-vnet0-rarp
-p ARP -j O-vnet0-arp-xyz
-j DROP 

where the chain 'arp-xyz' is accessed for filtering of ARP packets.


Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-18 11:58:18 -05:00
Stefan Berger
2657822e87 Extend the filter XML to support priorities of chains
This patch extends the filter XML to support priorities of chains
in the XML. An example would be:

<filter name='allow-arpxyz' chain='arp-xyz' priority='200'>
[...]
</filter>

The permitted values for priorities are [-1000, 1000].
By setting the priority of a chain the order in which it is accessed
from the interface root chain can be influenced.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-18 11:58:17 -05:00
Bharata B Rao
5f7b71b413 XML definitions for guest NUMA and parsing routines
This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:

<cpu>
        ...
        <topology sockets='2' cores='4' threads='2'/>
        <numa>
                <cell cpus='0-7' memory='512000'/>
                <cell cpus='8-15' memory='512000'/>
        </numa>
        ...
</cpu>

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
2011-11-17 13:34:42 -07:00
Philipp Hahn
2d9931d20c doc: Add <deviceboot> capability.
Allow /capabilities/guest/features/deviceboot.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2011-11-03 13:41:04 -06:00
Josh Durgin
7e02076624 Use a common xml type for ceph secret usage.
The types used in domaincommon.rng and secret.rng should be the same.

Move genericName to basictypes.rng, then drop redundant types now
that secret.rng uses basictypes.rng.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-28 16:01:14 -06:00
Josh Durgin
5bd6271f59 storage: add auth to virDomainDiskDef
Add additional fields to let you specify the how to authenticate with a disk.
The secret to use may be referenced by a usage string or a UUID, i.e.:

<auth username='myuser'>
 <secret type='ceph' usage='secretname'/>
</auth>

or

<auth username='myuser'>
 <secret type='ceph' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</auth>

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-10-28 12:51:22 -06:00
Sage Weil
536d1f8746 secret: add Ceph secret type
Add a new secret type to store a Ceph authentication key. The name
is simply an identifier for easy human reference.

The xml looks like this:

<secret ephemeral='no' private='no'>
 <uuid>0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f</uuid>
 <usage type='ceph'>
   <name>mycluster_admin</name>
 </usage>
</secret>

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.net>
2011-10-28 11:34:17 -06:00
Stefan Berger
552fe4cce6 nwfilter: extend schema to support new targets
Extend the nwfilter schema to support the continue and return targets.
2011-10-25 11:21:57 -04:00
Michal Privoznik
e5a84d74a2 conf: Introduce optional startupPolicy attribute for cdrom and floppy
This attribute says what to do with cdrom (or floppy) if
the source is missing. It accepts:
- mandatory - fail if missing for any reason (the default)
- requisite - fail if missing on boot up, drop if missing on
              migrate/restore/revert
- optional  - drop if missing at any start attempt.

However, this patch introduces only XML part of this new
functionality.
2011-10-25 09:22:42 +02:00
Jim Fehlig
c1bc3d892c Add AHCI support to qemu driver
Tested with multiple AHCI controllers and multiple disks attached
to a controller. E.g.,

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk0.raw'/>
      <target dev='sda' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='0'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk1.raw'/>
      <target dev='sdb' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='1'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk2.raw'/>
      <target dev='sdc' bus='sata'/>
      <address type='drive' controller='1' bus='0' unit='0'/>
    </disk>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </controller>
    <controller type='sata' index='1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </controller>
2011-10-17 15:44:21 -06:00
Harsh Prateek Bora
da8127e6b3 Introduce <driver> under <filesystem> to support open-by-handle
VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.

Sample:

    <filesystem type='mount'>
      <driver type='handle'/>
      <source dir='/folder/to/share1'/>
      <target dir='mount_tag1'/>
    </filesystem>

    <filesystem type='mount'>
      <driver type='path'/>
      <source dir='/folder/to/share2'/>
      <target dir='mount_tag2'/>
    </filesystem>

Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-12 12:15:28 -06:00
Laine Stump
4bb4109f7b qemu: add separate rerror_policy for disk errors
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.

This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).

For consistency, the value "report" has been added to the possible
values for error_policy as well.
2011-10-06 14:49:23 -04:00
Laine Stump
c329db7180 qemu: make PCI multifunction support more manual
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see

  https://bugzilla.redhat.com/show_bug.cgi?id=728174

and the discussion before and after

  https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html

This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:

  <address type='pci' domain='0x0000' bus='0x00'
           slot='0x04' function='0x0' multifunction='on'/>

In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.

With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.

A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
2011-10-01 11:48:28 -04:00
Laine Stump
dc79852af8 qemu: add ability to set PCI device "rombar" on or off
This patch was made in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=738095

In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).

rombar is forced on/off by adding:

  <rom bar='on|off'/>

inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.

At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.
2011-09-27 11:23:28 -04:00
Oskari Saarenmaa
f887334dcf Add unsafe cache mode support for disk driver
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
    as even if $prefix_CACHE_V2 is set, we can't know if unsafe
    is supported.

  * Improved the reliability of qemu cache type detection.
2011-09-23 08:29:57 -06:00
Peter Krempa
edd1295e1d link-state: conf: Add element to XML for controling link state
A new element is introduced to XML that allows to control
state of virtual network interfaces in hypervisors.

Live modification of the link state allows networking tools
propagate topology changes to guest OS or testing of
scenarios in complex (virtual) networks.

This patch adds elements to XML grammars and parsing and generating
code.
2011-09-06 16:08:15 +08:00
Marc-André Lureau
2e0dbaad9b redirdev: allows to specify device address
It is important to be able to attach USB redirected devices to a
particular controller (one that supports USB2 for instance).
Without this patch, only the default bus was used.

     <redirdev bus='usb' type='spicevmc'>
       <address type='usb' bus='0' port='4'/>
     </redirdev>
2011-09-06 15:12:52 +08:00
Eric Blake
89b6284fd9 snapshot: also support disks by path
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots.  So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.

* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
2011-09-05 07:03:04 -06:00
Eric Blake
d6f6b2d194 snapshot: add <disks> to snapshot xml
Adds an optional element to <domainsnapshot>, which will be used
to give user control over external snapshot filenames on input,
and specify generated filenames on output.

For now, no driver accepts this element; that will come later.

<domainsnapshot>
  ...
  <disks>
    <disk name='vda' snapshot='no'/>
    <disk name='vdb' snapshot='internal'/>
    <disk name='vdc' snapshot='external'>
      <driver type='qcow2'/>
      <source file='/path/to/new'/>
    </disk>
  </disks>
  <domain>
    ...
    <devices>
      <disk ...>
        <driver name='qemu' type='raw'/>
        <target dev='vdc'/>
        <source file='/path/to/old'/>
      </disk>
    </devices>
  </domain>
</domainsnapshot>

* src/conf/domain_conf.h (_virDomainSnapshotDiskDef): New type.
(_virDomainSnapshotDef): Add new elements.
(virDomainSnapshotAlignDisks): New prototype.
* src/conf/domain_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, disksorter)
(virDomainSnapshotAlignDisks): New functions.
(virDomainSnapshotDefParseString): Parse new fields.
(virDomainSnapshotDefFree): Clean them up.
(virDomainSnapshotDefFormat): Output them.
* src/libvirt_private.syms (domain_conf.h): Export new function.
* docs/schemas/domainsnapshot.rng (domainsnapshot, disksnapshot):
Add more xml.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: New test.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Update.
2011-09-05 07:03:04 -06:00
Eric Blake
5b30b08d66 snapshot: support extra state in snapshots
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
2011-09-05 07:03:04 -06:00
Eric Blake
471235307f snapshot: additions to domain xml for disks
As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.html
https://www.redhat.com/archives/libvir-list/2011-August/msg00552.html

Adds snapshot attribute and transient sub-element:

<devices>
  <disk type=... snapshot='no|internal|external'>
    ...
    <transient/>
  </disk>
</devices>

* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.
2011-09-05 07:03:04 -06:00