Commit Graph

122 Commits

Author SHA1 Message Date
Laine Stump
e7e595b4f0 interface.rng: Make miimon and arpmon optional for bond interfaces
This has been optional in netcf for awhile, but the change hadn't been
propogated to the libvirt copy of the RNG.
2010-11-15 14:22:42 -05:00
Laine Stump
9e3eaaf15d Fix ipv4-addr definition in interface.rng
Eric Blake pointed out a deficiency in this regex when it was
copy-pasted into network.rng. This is just propogating the fix back to
its origin.
2010-11-15 13:42:16 -05:00
Laine Stump
7665440956 Do a better job of validating IP and MAC addresses in network.rng
IP addresses and MAC addresses had been defined in the RNG simply as
<text/> meaning that, according to the RNG, any string could go in
there. Of course the C parsing code does a much better job of
validating, but we may as well have this describing the contents
accurately (even though it's currently only used during "make check").
2010-11-12 02:12:49 -05:00
Laine Stump
5983f2d297 re-indent network.rng following structural change
This commit is whitespace changes only, do avoid obscuring actual code
changes.
2010-11-12 02:12:29 -05:00
Laine Stump
3d10d3489b Put network.rng contents inside <grammar> for uniformity with other RNGs
All the other RNG files in libvirt are enclosed within <grammar>. This
commit makes the syntactical changes necessary to make network.rng fit
that pattern. (This is the first step in adding some data type
definitions to network.rng for more exact validation of IP and MAC
addresses).

Formatting changes (indentation) will be done in a subsequent commit,
so that actual changes to the code won't be obscured by whitespace.
2010-11-12 02:12:19 -05:00
Matthias Bolte
4362552dc1 Fix syntax-check error in domain.rng
Replace tab with spaces.
2010-11-09 20:02:35 +01:00
Jiri Denemark
38eec464f8 schema: Move timer element inside clock
Both conf/domain_conf.c and domain XML documentation have <timer>
elements inside /domain/clock. Change domain.rng schema to be consistent
with them.
2010-11-09 15:35:43 +01:00
Daniel P. Berrange
ff2bb29ca9 Misc test case fixes for SPICE
* docs/schemas/domain.rng: Fix merge error which left SPICE channel
  elements under VNC schema.
* tests/qemuhelptest.c: Add SPICE flag to kvm-83 test
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add
  <memballoon> element
2010-11-09 13:52:20 +00:00
Daniel P. Berrange
b0ef5c5367 Support SPICE channel security options
This extends the SPICE XML to allow channel security options

    <graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
      <channel name='main' mode='secure'/>
      <channel name='record' mode='insecure'/>
    </graphics>

Any non-specified channel uses the default, which allows both
secure & insecure usage

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add XML syntax for specifying per
  channel security options for spice.
* src/qemu/qemu_conf.c: Configure channel security with spice
2010-11-09 11:47:26 +00:00
Daniel P. Berrange
c909091b74 Add a <graphics> type for SPICE protocol
This adds an element

 <graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/>

This is the bare minimum that should be exposed in the guest
config for SPICE. Other parameters are better handled as per
host level configuration tunables

* docs/schemas/domain.rng: Define the SPICE <graphics> schema
* src/domain_conf.h, src/domain_conf.c: Add parsing and formatting
  for SPICE graphics config
* src/qemu_conf.c: Complain about unsupported graphics types
2010-11-09 11:46:27 +00:00
Daniel P. Berrange
3cf5b6f720 Add a QXL graphics card type to domain XML schema
* src/qemu_conf.c: Add dummy entry in enumeration
* docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag
* src/domain_conf.c, src/domain_conf.h: Add QXL to video type
  enumerations
2010-11-09 11:46:19 +00:00
Daniel Veillard
d528b52ff9 Add smbios element to schema and configuration to HVM os
the element has a mode attribute allowing only 3 values:
  - emulate: use the smbios emulation from the hypervisor
  - host: try to use the smbios values from the node
  - sysinfo: grab the values from the <sysinfo> fields

* docs/schemas/domain.rng: extend the schemas
* src/conf/domain_conf.h: add the flag to the domain config
* src/conf/domain_conf.h: parse and serialize the smbios if present
2010-11-08 15:14:50 +01:00
Daniel Veillard
5c3611ca39 Sysinfo extension to relax-ng schemas
Currently includes a subset of the SMBIOS strings set
2010-11-08 15:14:50 +01:00
Daniel P. Berrange
d532296cfa Fix comment for <video> tag in domain RNG schema
The comment for the <video> tag was a cut+paste error duplicating
info about the <graphics> tag

* docs/schemas/domain.rng: Fix comment for <video> tag
2010-11-02 14:46:54 +00:00
Eric Blake
a74f4e4464 vcpu: add current attribute to <vcpu> element
Syntax agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html

<domain ...>
  <vcpu current='x'>y</vcpu>
...

can now be used to specify 1 <= x <= y current vcpus, in relation
to the boot-time max of y vcpus.  If current is omitted, then
current and max are assumed to be the same value.

* docs/schemas/domain.rng: Add new attribute.
* docs/formatdomain.html.in: Document it.
* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
domainschematest.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.
2010-10-19 09:58:18 -06:00
Harsh Prateek Bora
75a6a9a8e0 new attribute accessmode to filesystem element
This introduces new attribute to filesystem element
to support customizable access mode for mount type.
Valid accessmode are: passthrough, mapped and squash.

Usage:
        <filesystem type='mount' accessmode='passthrough'>
          <source dir='/export/to/guest'/>
          <target dir='mount_tag'/>
        </filesystem>

passthrough is the default model if not specified, that's
also the current behaviour.
2010-10-14 15:08:24 +02:00
Daniel Veillard
af996f5544 Cleanup some tabs issues 2010-10-12 19:26:09 +02:00
Nikunj A. Dadhania
6a377990cf Adds xml entries for memory tunables in domain schema
The patch adds xml entries to the domain.rng file.

v2:
+ Fix typo min_guarantee
2010-10-12 19:26:09 +02:00
Stefan Berger
ec59a85d30 nwfilter: Extend schema to accept state attribute
Extend the nwfilter.rng schema to accept state attribute.
2010-10-07 06:44:41 -04:00
Eric Blake
62a50a0b80 vcpu: improve cpuset attribute
The <vcpu cpuset=...> attribute has been available since commit
e193b5dd, but without documentation or RNG validation.

* docs/schemas/domain.rng (vcpu): Further validate cpuset.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.c: Fix typos.
2010-10-01 12:08:34 -06:00
Stefan Berger
44ae227997 nwfilter: Extend nwfilter schema to accept comment attrib.
Extend the nwfilter.rng schema to accept comment attributes for all protocol
types.
2010-09-30 16:00:11 -04:00
Jim Fehlig
b9c10268e1 Add actions to virDomainLifecycle enum
Xen supports on_crash actions coredump-{destroy,restart}.  libvirt
cannot parse config returned by xend that contains either of these
actions

xen52 # xm li -l test | grep on_crash
    (on_crash coredump-restart)
xen52 # virsh dumpxml test
error: internal error unknown lifecycle type coredump-restart

This patch adds a new virDomainLifecycleCrash enum and appends
the new options to existing destroy, restart, preserve, and
rename-restart options.
2010-08-20 15:06:30 -06:00
Patrick Dignan
20be699ee3 storage: add support for Vendor and Model in XML
I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML.  This would allow vendor
extensions of specific devices.  The patch includes a test for the new
attributes as well.

Patrick Dignan
2010-08-19 15:58:43 -06:00
Daniel Veillard
79c27a620a allow memballoon type of none to desactivate it
The balloon device is automatically added to qemu guests if supported,
but it may be useful to desactivate it. The simplest to not change the
existing behaviour is to allow
  <memballoon type="none"/>
as an extra option to desactivate it (it is automatically added if the
memballoon construct is missing for the domain).
The following simple patch just adds the extra option and does not
change the default behaviour but avoid creating a balloon device if
type="none" is used.

* docs/schemas/domain.rng: add the extra type attribute value
* src/conf/domain_conf.c src/conf/domain_conf.h: add the extra enum
  value
* src/qemu/qemu_conf.c: if enum is NONE, don't activate the device,
  i.e. don't pass the args to qemu/kvm
2010-08-11 11:28:17 +02:00
Cole Robinson
82b6d7600e qemu: virtio console support
Enable specifying a virtio console device with:

<console type='pty'>
  <target type='virtio'/>
</console>
2010-07-28 16:48:00 -04:00
Cole Robinson
6b24755235 domain conf: Track <console> target type
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.

This will be used to differentiate between a serial vs. virtio console for
QEMU.

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-28 16:47:59 -04:00
Cole Robinson
4f24ca01e8 qemu: Allow setting boot menu on/off
Add a new element to the <os> block:

  <bootmenu enable="yes|no"/>

Which maps to -boot,menu=on|off on the QEMU command line.

I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
2010-07-27 16:38:32 -04:00
Matthias Bolte
cf8cf8a59f esx: Add autodetection for the SCSI controller model
This works for file-backed SCSI disk device with a datastore
related source path.
2010-07-24 17:31:04 +02:00
Matthias Bolte
afb85c5889 esx: Allow 'vmpvscsi' as SCSI controller model 2010-07-24 17:31:04 +02:00
Chris Lalancette
a71be01f04 Add tests for the new Qemu namespace XML.
Thanks to DV for knocking together the Relax-NG changes
quickly for me.

Changes since v1:
 - Change the domain.rng to correspond to the new schema
 - Don't allocate caps->ns in testQemuCapsInit since it is a static table

Changes since v2:
 - Change domain.rng to add restrictions on allowed environment names

Changes since v3:
 - Remove a bogus comment in the tests

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:45 -04:00
Daniel P. Berrange
b2f1863533 Explicitly represent balloon device in XML and handle PCI address
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device

   <memballoon model='virtio|xen'/>

It can also have a PCI address, auto-assigned if necessary.

The memballoon will be automatically added to all Xen and QEMU
guests by default.

* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
  and formatting for memballoon device. Always add a memory
  balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
  PCI device address in memory balloon device
* tests/*: Update to test new functionality
2010-07-21 11:33:11 +01:00
Jiri Denemark
af53714f47 cpu: Add support for CPU vendor
By specifying <vendor> element in CPU requirements a guest can be
restricted to run only on CPUs by a given vendor. Host CPU vendor is
also specified in capabilities XML.

The vendor is checked when migrating a guest but it's not forced, i.e.,
guests configured without <vendor> element can be freely migrated.
2010-07-07 17:26:00 +02:00
Matthias Bolte
c391291244 Add optional model attribute to the controller element
This is a step towards controller support for the ESX driver.
2010-06-24 14:56:04 +02:00
Philipp Hahn
ff5f7d7204 Allow one-or-more <boot dev="..."/> entries
According to docs/formatdomain.html.in, "The boot element can be
repeated multiple times to setup a priority list of boot devices to try
in turn." The Relax-NG schema required / allowed exactly one entry.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2010-06-21 10:11:33 +02:00
Stefan Berger
51d3fb0276 nwfilter: add XML attribute to control iptables state match
This patch adds an optional XML attribute to a nwfilter rule to give the user control over whether the rule is supposed to be using the iptables state match or not. A rule may now look like shown in the XML below with the statematch attribute either having value '0' or 'false' (case-insensitive).

[...]
<rule action='accept' direction='in' statematch='false'>
<tcp srcmacaddr='1:2:3:4:5:6'
           srcipaddr='10.1.2.3' srcipmask='32'
           dscp='33'
           srcportstart='20' srcportend='21'
           dstportstart='100' dstportend='1111'/>
</rule>
[...]

I am also extending the nwfilter schema and add this attribute to a test case.
2010-06-17 14:12:34 -04:00
Eric Blake
fb8552f83a maint: simplify some ignore files
* .hgignore: Delete, no longer used.
* examples/python/.gitignore: Delete, covered globally.
* include/.gitignore: Likewise.
* python/tests/.gitignore: Likewise.
* docs/schemas/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
* tests/sexpr2xmldata/.gitignore: Likewise.
* tests/confdata/.gitignore: Likewise.
* tests/xencapsdata/.gitignore: Likewise.
* tests/xmconfigdata/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
2010-06-15 07:31:10 -06:00
David Allan
77da2487ea Add multiIQN tests
* Fix broken rng schema
* Add test input & output files
2010-06-08 13:14:26 -04:00
Daniel P. Berrange
9cb08020e1 Fix test breakage from virtio serial changes
The virtio serial changes broke the test suite because they forgot
to add the new address attribute to the domain XML schema. The
xml2xml test also broke because the XML no longer roundtrips. This
is due to testing of auto-addition of <controller> elements. Split
that test case off into a separate XML file to avoid breakage

* docs/schemas/domain.rng: Allow port number for virtio serial addresses
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Revert to
  a simple config to avoid breaking xml2xml test
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.xml,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args: Add
  complex test case for auto-controller addition for xml2argv test
* tests/qemuxml2argvtest.c: Add channel-virtio-auto test
2010-06-08 16:31:50 +01:00
Matthias Bolte
5ac0272370 Install, distribute and package domainsnapshot.rng 2010-05-27 01:11:15 +02:00
Stefan Berger
a8f75d2c7d vepa: parsing for 802.1Qb{g|h} XML
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)
2010-05-25 17:37:00 -04:00
Daniel P. Berrange
60881161ea Expose a host UUID in the capabilities XML
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test
2010-05-25 17:09:18 +01:00
Chris Lalancette
54971d9170 Domain snapshot RNG and tests.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-05-20 13:50:03 -04:00
Stefan Berger
42f8b25b66 nwfilter: allow to mix filterrefs and rules in the schema
So far the references to other filters needed to appear before filtering
rules. With the below patch they can now appear in any order.

Also I forgot to add a couple of 'rarp's.
2010-04-28 09:12:39 -04:00
Stefan Berger
aea68ce906 nwfilter: add support for RAPR protocol
This patch adds support for the RARP protocol. This may be needed due to
qemu sending out a RARP packet (at least that's what it seems to want to
do even though the protocol id is wrong) when migration finishes and
we'd need a rule to let the packets pass.

Unfortunately my installation of ebtables does not understand -p RARP
and also seems to otherwise depend on strings in /etc/ethertype
translated to protocol identifiers. Therefore I need to pass -p 0x8035
for RARP. To generally get rid of the dependency of that file I switch
all so far supported protocols to use their protocol identifier in the
-p parameter rather than the string.

I am also extending the schema and added a test case.

changes from v1 to v2:
- added test case into patch
2010-04-27 07:26:12 -04:00
Stefan Berger
5c7c755f50 nwfilter: enable hex number inputs in filter XML
With this patch I want to enable hex number inputs in the filter XML. A
number that was entered as hex is also printed as hex unless a string
representing the meaning can be found.

I am also extending the schema and adding a test case. A problem with
the DSCP value is fixed on the way as well.

Changes from V1 to V2:

- using asHex boolean in all printf type of functions to select the
output format in hex or decimal format
2010-04-26 13:50:40 -04:00
Stefan Berger
9db01465e5 nwfilter: extend schema + add testcase w/ connlimit-above
I am extending the schema with the recently added connlimit-above
attribute and adding a test case for it to the test suite.
2010-04-23 11:42:39 -04:00
David Allan
cddd3ac8b0 Add enospace option to qemu disk error policy
* Dan Kenigsberg requested explicit support for the qemu default disk error policy which is enospace
2010-04-09 03:35:47 -04:00
Stefan Berger
479dfbb084 Fix for nwfilter: Add filter schema for nwfilter XML, extend domain XML schema
Fixing the regular expressions for variables where the first letter must be a $.
2010-04-06 16:40:49 -04:00
Stefan Berger
8cf0ed02be nwfilter: Add filter schema for nwfilter XML, extend domain XML schema
This patch adds a relaxng nwfilter schema along with a test that
verifies all the test output XML against the schema. The input XMLs
contain a lot of intentional out-of-range values that make them fail the
schema verification, so I am not verifying against those.
2010-04-06 11:09:46 -04:00
Laine Stump
4ee2b31804 Changes to clock timer XML to match final design.
The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):

1) 'wallclock' is changed to 'track', and the possible values are 'boot'
 (corresponds to old 'host'), 'guest', and 'wall'.

2) 'mode' has an additional value 'smpsafe'

3) when tickpolicy='catchup', there can be an optional sub-element of
   timer called 'catchup':

   <catchup threshold=123 slew=120 limit=10000/>

Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".

* docs/schemas/domain.rng: updated RNG definition to account for changes

* src/conf/domain_conf.h: change the C struct and enums to match changes.

* src/conf/domain_conf.c: timer parse and format functions changed to
                          handle the new selections and new element.

* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*

* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.
2010-04-02 09:50:29 -04:00