Commit Graph

2017 Commits

Author SHA1 Message Date
Daniel P. Berrangé
2ce9474c2a conf: remove unused virCapabilitiesSetHostCPU method
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-16 15:11:51 +00:00
Ján Tomko
fdd48f5b73 util: add virBufferTrimChars
A new helper for trimming combinations of specified characters from
the tail of the buffer.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-15 17:10:20 +01:00
Michal Privoznik
9d69bc19b9 virhostuptime: Introduce virHostBootTimeInit()
The idea is to offer callers an init function that they can call
independently to ensure that the global variables get
initialized.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2020-01-07 17:00:10 +01:00
Michal Privoznik
7c5264d2be src: Introduce and use virDomainDefHasOldStyleUEFI() and virDomainDefHasOldStyleROUEFI()
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-07 16:26:47 +01:00
Daniel P. Berrangé
d6f7d1a4d6 util: add compat impl of g_canonicalize_filename
g_canonicalize_filename was not introduced until glib 2.58
so we need a temporary backport of its impl.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-07 14:42:26 +00:00
Michal Privoznik
ff878fe77c vircgroupv2devices: Unexport virCgroupV2DevicesAttachProg()
This function is not called outside of the source file where it's
defined. There's no need to export it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2020-01-06 17:30:17 +01:00
Wang Huaqiang
5d876f25bd util, resctrl: using 64bit interface instead of 32bit for counters
The underlying resctrl monitoring is actually using 64 bit counters,
not the 32bit one. Correct this by using 64bit data type for reading
hardware value.

To keep the interface consistent, the result of CPU last level cache
that occupied by vcpu processors of specific restrl monitor group is
still reported with a truncated 32bit data type. because, in silicon
world, CPU cache size will never exceed 4GB.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
2020-01-06 13:30:03 +00:00
Daniel P. Berrangé
ea7b20a263 util: introduce virFileDataSync
A wrapper that calls g_fsync on Win32/macOS and fdatasync
elsewhere. g_fsync is a stronger flush than we need but it
satisfies the caller's requirements & matches the approach
gnulib takes.

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:12 +00:00
Daniel P. Berrangé
41d9bba57e util: add compat wrapper for g_fsync
g_fsync isn't available until 2.63 so we need a compat
wrapper temporarily.

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:12 +00:00
Fabiano Fidêncio
c727ed4224 util: Remove virFileIsAbsPath()
The function is no longer used since commit faf2d811f3.

Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-18 23:11:50 +01:00
Fabiano Fidêncio
ed12b030d4 util: Remove virFileSkipRoot()
The function is no longer used since commit faf2d811f3.

Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-18 23:11:50 +01:00
Michal Privoznik
3d6e2b5ee8 virhostdev: Include virNVMeDevice module
Now that we have virNVMeDevice module (introduced in previous
commit), let's use it int virHostdev to track which NVMe devices
are free to be used by a domain and which are taken.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Michal Privoznik
b1e19ca36d util: Introduce virNVMeDevice module
This module will be used by virHostdevManager and it's inspired
by virPCIDevice module. They are very similar except instead of
what makes a NVMe device: PCI address AND namespace ID. This
means that a NVMe device can appear in a domain multiple times,
each time with a different namespace.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Michal Privoznik
abd7c4c746 domain_conf: Introduce virDomainDefHasNVMeDisk
This function will return true if any of disks (or their backing
chain) for given domain contains an NVMe disk.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Michal Privoznik
a88eef7c48 virstoragefile: Introduce virStorageSourceChainHasNVMe
This function will return true if there's a storage source of
type VIR_STORAGE_TYPE_NVME, or false otherwise.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Michal Privoznik
8cd7196974 conf: Format and parse NVMe type disk
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Michal Privoznik
4fac30d988 virpci: Introduce virPCIDeviceAddressCopy
This helper is cleaner than plain memcpy() because one doesn't
have to look into virPCIDeviceAddress struct to see if it
contains any strings / pointers.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Michal Privoznik
081a12aba9 virpci: Introduce and use virPCIDeviceAddressGetIOMMUGroupDev
Sometimes, we have a PCI address and not fully allocated
virPCIDevice and yet we still want to know its /dev/vfio/N path.
Introduce virPCIDeviceAddressGetIOMMUGroupDev() function exactly
for that.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Daniel Henrique Barboza
990f4df34b numa_conf: add virDomainNumaNodesDistancesAreBeingSet() helper
Next patch will validate QEMU_CAPS_NUMA_DIST in a new qemu_domain.c
function. The code to verify if a NUMA node distance is being
set will still be needed in qemuBuildNumaArgStr() though.

To avoid code repetition, let's put this logic in a helper to be
used in qemuBuildNumaArgStr() and in the new function.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-16 17:50:31 -05:00
Ján Tomko
610963cd04 util: remove VIR_STRDUP and VIR_STRNDUP
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-12 14:24:35 +01:00
Eric Blake
02f790ffbe backup: Parse and output backup XML
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Daniel P. Berrangé
8506afff7b conf: make virCPUDef into a ref counted struct
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
6cc992bd1a conf: move NUMA capabilities into self contained object
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
2578d74aee conf: move virt type / os type / arch validation to post-parse
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple

  (virt type, os type, arch)

This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities.  This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.

Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.

To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:16 +00:00
Daniel P. Berrangé
908701c64a conf: sanitize virDomainSaveStatus & virDomainSaveConfig APIs
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.

Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.

Finally enforce checking of the return type and mark all parameters
as non-NULL.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:16 +00:00
Jidong Xia
863c0d8e8d qemu: cold-unplug of sound
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
2019-12-08 19:41:34 -05:00
Daniel P. Berrangé
1fbd80c42a tests: stop static linking to libvirt code in tests
If we static link to libvirt_util.la then we can't override functions in
this file by simply implementing them in the test code. Any tests should
dynamic link to the main libvirt.la and ensure symbols are exported.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-04 12:08:21 +00:00
Laine Stump
b03d9e9593 conf: add hypervisor agnostic, domain start-time, validation function for NetDef
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.

To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.

This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.

There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.

The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):

1) post-parse hypervisor-agnostic
   (virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
   (qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
   (qemuDomainValidateActualNetDef() - qemu_domain.c:5390)

I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-11-25 15:30:05 -05:00
Peter Krempa
c78fadb57c domcaps: Remove function initializing domain caps as unsupported
Commit 5751a0b6b1 added a helper function
called virDomainCapsFeaturesInitUnsupported which initialized all domain
capability features as unsupported.

When adding a new feature this would initialize it as unsupported also
for hypervisor drivers which the original author possibly didn't intend
to modify. To prevent accidental wrong value being reported in such case
revert back to initializing individual features in the hypervisor
drivers themselves.

This is not a straight revert as additonal patches modified how we store
the capabilities.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-22 08:16:51 +01:00
Jiri Denemark
1f58d10197 conf: Drop virDomainCapsCPUModelsAddSteal
Both virDomainCapsCPUModelsAdd and virDomainCapsCPUModelsAddSteal are so
simple we can just squash the code in a single function.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:06 +01:00
Jiri Denemark
180ac4ca34 conf: Drop unused virDomainCapsCPUModelsFilter
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:06 +01:00
Pavel Hrdina
b18b0ce609 vircgroup: introduce virCgroupV2DevicesGetKey
Device rules are stored in BPF map that is a hash type, this function
will create a key based on major and minor id of device.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:38 +01:00
Pavel Hrdina
63cfe7b84d vircgroup: introduce virCgroupV2DeviceGetPerms
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:37 +01:00
Pavel Hrdina
6a24bd75ed vircgroup: introduce virCgroupV2DevicesRemoveProg
We need to close our FD that we have for BPF program and map in order
to let kernel remove all resources once the cgroup is removed as well.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:34 +01:00
Pavel Hrdina
ef747499a5 vircgroup: introduce virCgroupV2DevicesPrepareProg
This function will be called for every virCgroup(Allow|Deny)* API in
order to prepare BPF program for guest.  Since libvirtd can be restarted
at any point we will first try to detect existing progam, if there is
none we will create a new empty BPF program and lastly if we don't have
any space left in the existing BPF map we will create a new copy of the
BPF map with more space and attach a new program with that map into the
guest cgroup.

This solution allows us to start with reasonably small BPF map consuming
only small amount of memory and if needed we can easily extend the BPF
map if there is a lot of host devices used in guest or if user wants to
hot-plug a lot of devices once the guest is running.

Since there is no way how to reallocate existing BPF map we need to
create a new copy if we run out of space in current BPF map.

This overcomes all the limitations in BPF:

    - map used in program has to be created before the program is loaded
      into kernel

    - once map is created you cannot change its size

    - you cannot replace map in existing program

    - you cannot use an array of maps because it can store FD to maps
      of one specific size so we would not be able to use it to overcome
      the second issue

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:33 +01:00
Pavel Hrdina
afa2788662 vircgroup: introduce virCgroupV2DevicesCreateProg
This function creates new BPF program with new empty BPF map with the
default size and attaches it to the guest cgroup.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:32 +01:00
Pavel Hrdina
ce11a5c59f vircgroup: introduce virCgroupV2DevicesDetectProg
This function will be called if libvirtd was restarted while some
domains were running.  It will try to detect existing programs attached
to the guest cgroup.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:31 +01:00
Pavel Hrdina
48423a0b5d vircgroup: introduce virCgroupV2DevicesAttachProg
This function loads the BPF prog with prepared map into kernel and
attaches it into guest cgroup.  It can be also used to replace existing
program in the cgroup if we need to resize BPF map to store more rules
for devices. The old program will be closed and removed from kernel.

There are two possible ways how to create BPF program:

    - One way is to write simple C-like code which can by compiled into
      BPF object file which can be loaded into kernel using elfutils.

    - The second way is to define macros which look like assembler
      instructions and can be used directly to create BPF program that
      can be directly loaded into kernel.

Since the program is not too complex we can use the second option.

If there is no program, all devices are allowed, if there is some
program it is executed and based on the exit status the access is
denied for 0 and allowed for 1.

Our program will follow these rules:

    - first it will try to look for the specific key using major and
      minor to see if there is any rule for that specific device

    - if there is no specific rule it will try to look for any rule that
      matches only major of the device

    - if there is no match with major it will try the same but with
      minor of the device

    - as the last attempt it will try to look for rule for all devices
      and if there is no match it will return 0 to deny that access

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:05 +01:00
Pavel Hrdina
30b6ddc44c vircgroup: introduce virCgroupV2DevicesAvailable
There is no exact way how to figure out whether BPF devices support is
compiled into kernel.  One way is to check kernel configure options but
this is not reliable as it may not be available.  Let's try to do
syscall to which will list BPF cgroup device programs.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:04 +01:00
Pavel Hrdina
07946d6e39 util: introduce virbpf helpers
In order to implement devices controller with cgroup v2 we need to
add support for BPF programs, cgroup v2 doesn't have devices controller.

This introduces required helpers wrapping linux syscalls.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:00 +01:00
Peter Krempa
5751a0b6b1 domcaps: Add function for initializing domain caps as unsupported
For future extensions of the domain caps it's useful to have a single
point that initializes all capabilities as unsupported by a driver. The
driver then can enable specific ones.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-14 15:50:43 +01:00
Peter Krempa
1900936fe6 util: file: Remove virFileReadLink
The function is unused so we can remove it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-14 12:42:09 +01:00
Peter Krempa
9a2ca9c947 conf: capabilities: Refactor API for setting guest capability features
Remove the need to pass around strings and switch to the enum values
instead.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-13 08:19:37 +01:00
Michal Privoznik
33ed622106 Drop virVasprintf()
Now that function is no longer used, it can be dropped.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Michal Privoznik
dd98a6edb9 Drop virAsprintf()
Now that function is no longer used, it can be dropped.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Peter Krempa
d95eded4bb conf: Rename virDomainCapsFeature to virDomainProcessCapsFeature
The enum name sounds too generic. It in fact describes the capabilities
of the process, thus add 'Process' to the name.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-12 14:37:59 +01:00
Peter Krempa
0967708b81 util: buffer: Remove virBufferCheckError
The function now does not return an error so we can drop it fully.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Peter Krempa
205d6a2af7 util: buffer: Remove virBufferError
The function now does not return an error so we can drop it fully.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Peter Krempa
673f5e04da util: buffer: Split getting of effective indent out of virBufferGetIndent
The function basically does two very distinct things depending on a
bool. As a first step of conversion split out the case when @dynamic is
true and implement it as a new function and convert all callers.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Peter Krempa
36d934e7ae util: hash: Introduce virHashHasEntry
Add a helper that checks whether an entry with given name exists but
does not touch the userdata.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-10-21 16:53:42 +02:00