proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
qemud/dispatch.c qemud/internal.h qemud/protocol.h
src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
src/test.c src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xm_internal.c
src/xml.h src/xs_internal.c: applied patch from Richard Jones
adding virConnectGetCapabilities(), plus various small little
fixes
* docs/*: fixed the api extractor script and regenerated
Daniel
to better handle the case where there is no limit in the domain
upper memory size
* docs/architecture.html docs/format.html docs/intro.html
docs/libvir.html: started to update the documentation to reflect
the current state
Daniel
src/Makefile.am src/libvirt.c src/qemu_internal.c src/test.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xml.c src/xs_internal.c
tests/Makefile.am tests/sexpr2xmltest.c tests/xmconfigtest.c:
allow selective compilation of Xen,QEmu/KVM and test support
in or out at configure time. Also allows to compile on a system
without Xen development installed. All drivers are selected by
default.
Daniel
add a check for minimal size of Xen Dom0, track places where we
had arbitrary minimal memory requirement and use a predefined
macro to clean this up.
Daniel
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/qemu_internal.c src/test.c src/virsh.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xs_internal.c: applied patch from
Masayuki Sunou to add and entry point to check the maximum
number of virtual CPU supported by a virtualization mechanism
* doc/*.html doc/libvirt-*.xml: regenerated the interfaces descriptions
and associated docs.
Daniel
* libvirt.spec.in: BuildRequires: /sbin/iptables and
run configure with the --with-init-script and
--with-qemud-pid-file parameters.
* configure.in: it's --with-qemud-pid-file, not
--with-pid-file
* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
GNOME but with a few more flags we'd been using.
* configure.in: use that instead of setting CFLAGS
directly.
* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
* qemud/conf.c: check for malloc failure in GenerateXML()
and GenerateNetworkXML()
* qemud/driver.c: free the XML output after returning it
from the DumpXML() commands.
* qemud/libvirtd.in: add init script for libvirt_qemud
* qemud/Makefile.am: install it unless we were configured
with --with-init-scripts=none
* configure.in: add --with-init-scripts to allow us
have different flavour init scripts
* qemud/qemud.c: add --pid-file and default to writing
out a PID file to /var/run/libvirt_qemud.pid in daemon
mode.
* configure.in: add --with-pid-file arg
* qemud/Makefile.am: install libvirt_qemud in /usr/sbin
instead of /usr/libexec
* src/Makefile.am, src/qemu_internal.c: pass the correct
path to libvirt
* qemud/internal.h: put the config directory paths in
an array in order to make them easier to initialize,
but still expose pointers to each of them as members
in the server struct.
* qemud/qemud.c: cleanup the config directory path
initialization.
* qemud/driver.c: maintain the autostart flag on disk
using symlinks from the "autostart" directories to
the corresponding config files.
* qemud/internal.h: add paths to the autostart links
to the vm/network structures and paths to the autostart
dirs to the server struct.
* qemud/qemud.c: initialize the server autostart dir
patches.
* qemud/conf.h: expose qemudEnsureDir()
* qemud/conf.c: check the autostart symlinks when
loading config files at startup.
* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
requests and replies to the protocol.
* src/qemu_internal.c: hookup the qemu driver autostart
methods
* qemud/dispatch.c, qemud/driver.[ch], internal.h: add
the daemon side, but just set an in-memory autostart
flag for now.
* include/libvirt/libvirt.h.in, src/libvirt.c add
virDomainGetAutostart(), virDomainSetAutostart(),
virNetworkGetAutostart() and virNetworkSetAutostart().
* src/libvirt_sym.version: export the API
* src/driver.h: add methods to the driver vtables.
* src/proxy_internal.c, src/qemu_internal.c,
src/test.c, src/xen_internal.c, src/xend_internal.c,
src/xm_internal.c, src/xs_internal.c: set those
methods to NULL
* qemud/conf.[ch]: significantly re-factor qemudLoadConfigXML()
so that "parse the XML", "assign the def to a VM" and
"save the XML" operations are in separate functions.
Add qemudRemoveInactiveVM() and qemudRemoveInactiveNetwork().
Report errors when loading config files at startup. Check
that a domain/network's name matches the config filename.
* qemud/driver.c: update the Create() and Define() functions
to explicitly parse/assign/save. Also, fix bug where if
Create() failed, we would free the VM without removing it
from the inactive list.
* qemud/qemud.c: use qemudRemoveInactiveVM/Network()
* qemud/driver.[ch], qemud/dispatch.c: fix the fact that
qemudDispatchDomainStart() doesn't report an error if the uuid
lookup fails and also move the uuid lookup into the driver
so that it matches the way we do Destroy().
* qemud/conf.c, qemud/driver.c, qemud/internal.h,
qemud/qemud.c: Merge the ->activevms and ->inactivevms
into a single ->vms list in order to make things
easier to manage. Likewise for networks. Also add
qemudIsActiveVM() and qemudIsActiveNetwork() inline
functions.
Fix a few leaks
* qemud/qemud.c: qemudCleanup(): free the socket
structures
* qemud/conf.c: fix various leaks in the xml parsing
* qemud/iptables.c: fix a typo causing a leak
* qemud/qemud.c: clean up qemudInitialize() and qemudListen()
so as to coalesce the two "system vs. user" code paths and
fix up some problems noticed by dan.
* qemud/qemud.c, qemud/dispatch.c, qemud/internal.h
qemud/conf.c, qemud/driver.c, configure.in: add a
qemudLog() function which uses syslog() if we're in daemon
mode, doesn't output INFO/DEBUG messages unless the
verbose flag is set and doesn't output DEBUG messages
unless compiled with --enable-debug. Also, make a first
pass through fatal errors and add error messages for them.
* qemud/internal.h, qemud/qemud.c: improve signal handling
and handle SIGHUP by shutting down all guests and networks
and re-loading configs, and handle SIGINT and SIGTERM
by shutting down cleanly.
* qemud/qemud.c, qemud/bridge.c, qemud/iptables.c: fix
our FD_CLOEXEC usage so that all fds which should be
closed on exec are marked as such and that we leave
exec() to do the actual closing.
* qemud/iptables.[ch]: add code for managing iptables
rules.
* qemud/Makefile.am: add iptables.[ch].
* qemud/qemud.c: add and remove iptables rules as
appropriate.
* qemud/conf.c: when starting a guess, add a rule
allowing it to forward packets across the networks
bridge.
* qemud/internal.h: add iptables context ptr
* configure.in: add --with-iptables-dir and
--with-iptables-prefix to allow us to put our rules
in a chain with the given prefix and save the rules
in files in the given dir so as to integrate with
the proposed "service iptables restart" solution
in:
https://bugzilla.redhat.com/227011
* include/libvirt/libvirt.h.in, src/libvirt.c: add
virNetworkGetBridgeName() to allow finding out what
bridge to connect to in order to join a network.
* src/driver.h: add networkGetBridgeName() to vtable.
* qemud/protocol.h: add the request and reply to
the qemud protocol.
* qemud/dispatch.c, qemud/driver.[ch]: handle them
here.
* src/qemu_internal.c: implement GetBridgeName()
in the qemu driver.
* src/libvirt_sym.version: add new symbol.
* src/xend_internal.c, src/xm_internal.c: pass the
connection to virDomainParseXMLDesc()
* src/xml.[ch]: make virDomainParseXMLDesc accept
a virConnectPtr so that we can use it later to
lookup the bridge associated with a network
* tests/xml2sexprtest.c: just pass NULL here, it's
safe
* qemud/conf.c: add support for connecting a qemu
guest to a bridge using a tap device in order to
connect it to a virtual network.
* qemud/internal.h: add <interface type="network">
config and track tapfds so as to not close them
on exec.
* qemud/qemud.c: don't close tapfds on exec and
disconnect the iface when the guest shuts down.
* configure.in: add --disable-bridge-params, check
for libsysfs and various kernel headers
* bridge.[ch]: add code for managing bridges
* qemud/Makefile.am: add bridge.[ch] and link against
libsysfs if enabled.
* qemud/conf.c: add support for bridge config.
* qemud/internal.h: add various bridging bits
* qemud/qemud.c: implement qemudStartNetworkDaemon()
and qemudShutdownNetworkDaemon().
* qemud/conf.[ch]: implement parsing and saving network
configs.
* qemud/driver.c: flesh out the stubs
* qemud/internal.h: add networks list etc. to
struct qemud_server
* qemud/qemud.c: add qemudStartNetworkDaemon() and
qemudShutdownNetworkDaemon() stubs.
* qemud/qemud.c: Re-factor out qemudExec() so that it can
be used to launch dnsmasq.
* qemud/conf.c: don't return argc from qemudBuildCommandLine()
as exec() doesn't need it.
* qemud/conf.c: Re-factor bits of conf.c so that:
- qemudMakeConfigPath() can be re-used given another configDir
- split qemudEnsureConfigDir() out of qemudSaveConfig() so
that it may be re-used to create another configDir
- split qemudScanConfigDir() out so that qemudScanConfigs()
can scan multiple configDirs
* qemud/conf.c: handle an unspecified MAC address,
fix the argv freeing code in qemudBuildCommandLine()
and fix copy and paste error in qemudGenerateXML()
Note: potential ABI break here, but people should
only really be using virError structs returned from
libvirt itself.
* include/libvirt/virterror.h: add virNetwork
to virError
* src/internal.h, src/virterror.c: add network param
to __virRaiseError()
* src/conf.c, src/hash.c, src/libvirt.c, src/proxy_internal.c,
src/qemu_internal.c, src/sexpr.c, src/test.c, src/xen_internal.c,
src/xend_internal.c, src/xm_internal.c, src/xml.c, src/xmlrpc.c,
src/xs_internal.c: update.
* include/libvirt/libvirt.h.in: add the networks APIs
* include/libvirt/virterror.h: add some error codes
* src/driver.h: add network driver vtable
* src/hash.c: add networks hash
* src/internal.h: add virNetwork
* src/libvirt.c: hook up the APIs to the network
driver
* src/libvirt_sym.version: add the new APIs
* src/virterror.c: handle the new error codes
Issues pointed out by Karel Zak <kzak@redhat.com>
* src/virsh.c: fix up some syntax strings, use BUFSIZ
and free names returned from virConnectListDefinedDomains()
* src/internal.h: virDomain.handle refers to the "id"
in the API, so re-name to virDomain.id to avoid
confusion.
* src/hash.c, src/libvirt.c, src/proxy_internal.c, src/test.c,
src/xen_internal.c, src/xend_internal.c, src/xm_internal.c,
src/xml.c, src/xs_internal.c: update for rename.
