Commit Graph

115 Commits

Author SHA1 Message Date
Dawid Zamirski
5b36410f37 esx: Add VMCI device for virtualHW >= 7
This patch fixes an issue where vMotion fails when VMCI device is not
present in the vmx file.
2016-05-26 11:17:06 +02:00
Dawid Zamirski
2b89f1d8f5 esx: add pciBridge devices when SCSI is used
When a SCSI controller is present, ESX adds several pciBridge devices
to vmx file. This fixes an error message where it refuses to create VM
due to not enough PCI devices available. This applies only to virtualHW
version >= 7.
2016-05-26 10:55:09 +02:00
Peter Krempa
e6e144689d conf: Change virDomainCputune member 'shares' to unsigned long long
cgroup functions set and get the longer type so use it everywhere
2016-05-25 16:59:58 +02:00
Pavel Hrdina
6bd0cd3b73 graphics: rename gListen to glisten
We have both in the code.  Let's use only one format.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-20 10:05:56 +02:00
Pavel Hrdina
b33c14b342 graphics: make address attribute for listen type='address' optional
We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element.  This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-17 10:41:45 +02:00
Cole Robinson
b1fc6a7b73 conf: domain: reject name containing '/'
Trying to define a domain name containing an embedded '/'
will immediately fail when trying to write the XML to disk for
our stateful drivers. This patch explicitly rejects names
containing a '/', and provides an xmlopt feature for drivers
to avoid this validation check, which is enabled in every
non-stateful driver that already has xmlopt handling wired up.

(Technically this could reject a previously accepted vmname like
 '/foo', however at least for the qemu driver that falls over
 later when starting qemu)

https://bugzilla.redhat.com/show_bug.cgi?id=639923
2016-05-02 10:06:04 -04:00
Pavel Hrdina
6e76738e54 build: fix build on RHEL-6
GCC in RHEL-6 complains about listen:

../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]

This renames all the listen to gListen.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-04-13 17:28:50 +02:00
Pavel Hrdina
f53bb3eda9 use virDomainGraphicsGetListen instead of the other getters
There is no point the use two different getters on the same listen
structure few lines apart.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-04-13 10:43:49 +02:00
Pavel Hrdina
4b75237fe6 domain_conf: introduce virDomainGraphicsListenAppendAddress
This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type.  The new function will auto-expand the listens array
and append a new listen.

The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen.  The two remaining uses can access the
listen structure directly.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-04-13 10:43:49 +02:00
Cole Robinson
9a423d1826 domain: Add virDomainDefAddImplicitDevices
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
2016-03-20 16:11:04 -04:00
Peter Krempa
185d13b1b0 conf: refactor checking for unsupported memory devices
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.

The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
2016-03-09 10:09:16 +01:00
Peter Krempa
23eb382128 conf: introduce parser feature flags
To avoid having to forbid new features added to domain XML in post parse
callbacks for individual hypervisor drivers the feature flag mechanism
will allow to add a central check that will be disabled for the drivers
that will add support.

As a first example flag, the 'hasWideSCSIBus' is converted to the new
bitmap.
2016-03-09 10:09:16 +01:00
Yuri Chornoivan
47b70b8793 Fix minor typos 2016-03-07 18:37:25 +01:00
Michal Privoznik
35c3aab44d vmx: Adapt to emptyBackingString for cdrom-image
https://bugzilla.redhat.com/show_bug.cgi?id=1266088

We are missing this value for cdrom-image device. It seems like
there's no added value to extend this to other types of disk
devices [1].

1: https://www.redhat.com/archives/libvir-list/2016-January/msg01038.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-25 08:34:23 +01:00
Martin Kletzander
93103da84b Provide parse flags to PostParse functions
This way both Domain and Device PostParse functions can act based on the
flags.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-01-11 10:54:50 +01:00
Peter Krempa
71c89ac9df conf: Replace read accesses to def->vcpus with accessor 2015-12-09 14:57:12 +01:00
Peter Krempa
957d597330 conf: Replace writes to def->vcpus with accessor 2015-12-09 14:57:12 +01:00
Peter Krempa
d1dda68777 conf: Replace read access to def->maxvcpus with accessor
Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and
reusing it accross libvirt.
2015-12-09 14:57:12 +01:00
Peter Krempa
c970c4a5ea conf: Add helper to check whether domain has offline vCPUs
The new helper will simplify checking whether the domain config contains
inactive vCPUs.
2015-12-09 14:57:12 +01:00
Peter Krempa
4e187169f0 conf: Replace writes to def->maxvcpus with accessor
To support further refactors replace all write access to def->maxvcpus
with a accessor function.
2015-12-09 14:57:12 +01:00
Pavel Hrdina
eba20715f9 vmware/vmx: use virDomainDefPostParse after parsing vmx config
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:36:44 +01:00
Peter Krempa
8059a99025 conf: Rename max_balloon to total_memory
The name of the variable was misleading. Rename it and it's setting
accessor before other fixes.
2015-09-22 16:09:28 +02:00
Matthias Bolte
636a990587 vmx: Expose datacenter path in domain XML
Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.

Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.
2015-09-17 11:34:54 +01:00
Matthias Bolte
98d8c811ce vmx: Add handling for CDROM devices with SCSI passthru
https://bugzilla.redhat.com/show_bug.cgi?id=1172544
2015-09-07 22:19:42 +02:00
Matthias Bolte
7c959e0dc0 vmx: The virVMXParseDisk deviceType can be NULL, add some missing checks 2015-09-07 22:17:49 +02:00
Matthias Bolte
1d204cf196 vmx: Some whitespace cleanup 2015-09-05 13:58:03 +02:00
John Ferlan
1b08cc170a conf: Check for hostdev conflicts when assign default disk address
https://bugzilla.redhat.com/show_bug.cgi?id=1210587  (completed)

When generating the default drive address for a SCSI <disk> device,
check the generated address to ensure it doesn't conflict with a SCSI
<hostdev> address. The <disk> address generation algorithm uses the
<target> "dev" name in order to determine which controller and unit
in order to place the device. Since a SCSI <hostdev> device doesn't
require a target device name, its placement on the guest SCSI address
"could" conflict.  For instance, if a SCSI <hostdev> exists at
controller=0 unit=0 and an attempt to hotplug 'sda' into the guest
made, there would be a conflict if the <hostdev> is already using
/dev/sda.
2015-08-12 16:09:05 -04:00
John Ferlan
5cd985221b Use the correct symbol for 'onCrash'
Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs
2015-06-30 11:32:50 -04:00
Jiri Denemark
890fa6a055 Add privateData to virDomainDiskDef
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-05-15 08:04:26 +02:00
Cole Robinson
5f7c599456 domain: Convert os.type to VIR_DOMAIN_OSTYPE enum 2015-04-20 16:40:09 -04:00
Peter Krempa
bffb9163a1 conf: Add support for parsing and formatting max memory and slot count
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.

To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
2015-03-23 14:25:14 +01:00
Peter Krempa
4f9907cd11 conf: Replace access to def->mem.max_balloon with accessor functions
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.

To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.

The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.

Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
2015-03-16 14:26:51 +01:00
Dawid Zamirski
1988a96e3a vmx: add e1000e to supported NIC models.
This NIC model is supported on hardware version 8 and newer and libvirt
ESX driver does support those.
2015-03-12 17:58:19 +01:00
Peter Krempa
c03411199e conf: Allocate domain definition with the new helper
Use the virDomainDefNew() helper to allocate the definition instead of
doing it via VIR_ALLOC.
2015-02-20 17:43:05 +01:00
Geoff Hickey
bb072e8a38 vmx: Fix a VMX parsing problem
VMware ESX does not always set the "serialX.fileType" tag in VMX files. The
default value for this tag is "device", and when adding a new serial port
of this type VMware will omit the fileType tag. This caused libvirt to
fail to parse the VMX file. Fixed by making this tag optional and using
"device" as a default value. Also updated vmx2xmltest to test for this
case.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-01-07 17:17:00 -07:00
Martin Kletzander
3d45429ef1 Remove unnecessary curly brackets in src/vmx/vmx.c
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:00 +01:00
Peter Krempa
0b73366945 Implement empty post parse callbacks for all drivers
To allow easy implementation of a callback check this patch adds empty
post parse callbacks to drivers that were missing them.
2014-10-15 10:27:51 +02:00
Ján Tomko
92a8e72f9d Use virBufferCheckError everywhere we report OOM error
Replace:
if (virBufferError(&buf)) {
    virBufferFreeAndReset(&buf);
    virReportOOMError();
    ...
}

with:
if (virBufferCheckError(&buf) < 0)
    ...

This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
2014-07-03 10:48:14 +02:00
Matthias Bolte
0e4370eddf vmx: Relax virtualHW.version check
The original implementation of the VMX config parser assumed that the
virtualHW.version would have more influence on the content of the VMX
file than it actually seems to have. It started with accepting only
version 4. Additonal versions were added later without any additional
changes in the parser itself. This suggests that the influence of the
virtualHW.version on the content and format of the VMX file is small
or non-existent.

The parser worked without any changes across several virtualHW and
vSphere versions. So instead of adding new virtualHW.version values to
the parser as they come along, or adding an extra flag to allow unknown
virtualHW.version values just relax the check to require version 4 or
later.
2014-06-07 21:37:51 +02:00
Eric Blake
bc3f5f190e conf: consolidate disk def allocation
A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.

I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk.  Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.

* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-06 09:56:27 -06:00
Daniel P. Berrange
21a2446d92 Replace Scsi with SCSI throughout
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-08 11:10:31 +01:00
Eric Blake
16ac4c9d64 conf: move host disk type to util/
A continuation of the migration of disk details to virstoragefile.
This patch moves a single enum, but converting the name has quite
a bit of fallout.

* src/conf/domain_conf.h (virDomainDiskType): Move...
* src/util/virstoragefile.h (virStorageType): ...and rename.
* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Update clients.
* src/conf/domain_conf.c (virDomainDiskSourceDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefFormat, virDomainDiskGetActualType)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Likewise.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotAlignDisks, virDomainSnapshotDiskDefFormat):
Likewise.
* src/esx/esx_driver.c (esxAutodetectSCSIControllerModel)
(esxDomainDefineXML): Likewise.
* src/locking/domain_lock.c (virDomainLockManagerAddDisk):
Likewise.
* src/lxc/lxc_controller.c
(virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/parallels/parallels_driver.c (parallelsGetHddInfo):
Likewise.
* src/phyp/phyp_driver.c (phypDiskType): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuTranslateDiskSourcePool)
(qemuTranslateSnapshotDiskSourcePool): Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDetermineDiskChain): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalBackingActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/security/security_apparmor.c
(AppArmorRestoreSecurityImageLabel)
(AppArmorSetSecurityImageLabel): Likewise.
* src/security/security_dac.c (virSecurityDACSetSecurityImageLabel)
(virSecurityDACRestoreSecurityImageLabelInt)
(virSecurityDACSetSecurityAllLabel): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt)
(virSecuritySELinuxSetSecurityImageLabel)
(virSecuritySELinuxSetSecurityAllLabel): Likewise.
* src/storage/storage_backend.c (virStorageFileBackendForType):
Likewise.
* src/storage/storage_backend_fs.c (virStorageFileBackendFile)
(virStorageFileBackendBlock): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageFileBackendGluster): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives)
(vboxDomainAttachDeviceImpl, vboxDomainDetachDevice): Likewise.
* src/vmware/vmware_conf.c (vmwareVmxPath): Likewise.
* src/vmx/vmx.c (virVMXParseDisk, virVMXFormatDisk)
(virVMXFormatFloppy): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr)
(xenFormatSxprDisk): Likewise.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-01 10:38:13 -06:00
Dawid Zamirski
5cc3cce5cc ESX: Add support for virtualHW version 10
This follows the same pattern when v8 and v9 were added. I've tested
this with my ESX 5.5 and seems to work fine.
2014-03-30 13:51:03 +02:00
Ján Tomko
bdffab0d5c Treat zero cpu shares as a valid value
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.

Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
2014-03-26 10:10:02 +01:00
Ján Tomko
9e7ecabf94 Indent top-level labels by one space in the rest of src/ 2014-03-25 14:58:40 +01:00
Eric Blake
f627468787 conf: use disk source accessors in vmx/
Part of a series of cleanups to use new accessor methods.

* src/vmx/vmx.c (virVMXHandleLegacySCSIDiskDriverName)
(virVMXParseDisk, virVMXFormatDisk, virVMXFormatFloppy): Use
accessors.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-24 11:59:51 -06:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Martin Kletzander
14fc041f69 Don't leave empty first line in C source files
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.

Found by:

git grep -nH '^$' | grep '\.[ch]:1:'

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-18 12:17:12 +01:00
Wout Mertens
5d7e4f0cf3 Support transient attribute on vmware disks
vmx/vmx.c ignores the transient attribute on the disk xml format. This patch
adds a 1-1 relationship between it and [disk].mode = "independent-nonpersistent".

The other modes are ignored as before. It works in my testing.

https://bugzilla.redhat.com/show_bug.cgi?id=1044023

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-17 14:24:49 -07:00
Geoff Hickey
842f6fd338 esx: Fix floppy.fileName handling in the vmx file parser
The vmx file parsing code was reporting errors when parsing floppy.fileName
entries if the filename didn't end in .flp. There is no such restriction in
ESX; even using the GUI to configure floppy filenames you can specify any
arbitrary file with any extension.

Fix by changing the vmx parsing code so that it uses the floppy.fileType
value to determine whether floppy.fileName refers to a block device or a
regular file.

Also remove code that would have generated an error if no floppy.fileName
was specified. This is not an error either.

Updated the floppy tests in vmx2xmltest.c and xml2vmxtest.c.
2013-10-15 11:39:02 +01:00