The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emphasize the various sound card models and other config options by
using ``...``.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Indent the example XML block so that it belongs to the paragraph talking
about it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Somehow the example I neglected to fully update the example for the
interface passt backend when the design changed during
development. This fixes the example to reflect what is in the code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The limits are different with cgroups v1 and v2 but our XML
documentation and virsh manpage mentioned only cgroups v1 limits without
explicitly saying it only applies to cgroups v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemu-6.2 introduced support for the hv-avic enlightenment which allows
to use Hyper-V SynIC with hardware APICv/AVIC enabled.
Implement the libvirt support for it.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/402
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix some small typos and syntax errors in file formatdomain.rs.
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When commit bac6b266fb added this "functionality" this was the only
naming I could think of, but after discussion with Dan we found the name
'null' fits a bit better, so change it before we make a release with the
old name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Normally when an UEFI firmware is marked as read-only, an associated
NVRAM file will be created. Some builds of UEFI firmware, however, wish
to remain stateless and so will be read-only, but never have any NVRAM
file. To represent this concept a 'stateless' tristate bool attribute
is introduced on the <loader/> element.
There are rather a large number of permutations to consider.
With default firmware selection
* <os/>
=> Historic default, no change
* <os>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
With manual legacy BIOS selection
* <os>
<loader>/path/to/seabios</loader>
...
</os>
=> Historic default, no change
* <os>
<loader stateless='yes'>/path/to/seabios</loader>
...
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'>/path/to/seabios</loader>
...
</os>
=> Invalid, bios is always stateless
With manual UEFI selection
* <os>
<loader type='pflash'>/path/to/edk2</loader>
...
</os>
=> Historic default, no change
* <os>
<loader type='pflash' stateless='yes'>/path/to/edk2</loader>
...
</os>
=> Skip auto-filling NVRAM / template
* <os>
<loader type='pflash' stateless='no'>/path/to/edk2</loader>
...
</os>
=> Explicit version of historic default, no change
With automatic firmware selection
* <os firmware='bios'/>
=> Historic default, no change
* <os firmware='bios'>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os firmware='bios'>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
* <os firmware='uefi'/>
=> Historic default, no change
* <os firmware='uefi'>
<loader stateless='yes'/>
</os>
=> Skip auto-filling NVRAM / template
* <os firmware='uefi'>
<loader stateless='no'/>
</os>
=> Explicit version of historic default, no change
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some USB devices have a buggy firmware that either crashes on
device reset, or make the device unusable in some other way.
Fortunately, QEMU offers a way to skip device reset either
completely, or if device is not initialized yet. Expose this
ability to users under:
<hostdev mode='subsystem' type='usb'>
<source guestReset='off'/>
</hostdev>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The commit v8.3.0-rc1~199 introduced <address/> to <iommu/>
device. And while it updated the RNG it forgot to update the
docs. Fix that.
Fixes: b0eb1e193f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Document the format of the 'readahead' and 'timeout' XML elements more
accurately.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add an element to configure the thread pool size:
...
<binary>
<thread_pool size='16'/>
</binary>
...
https://bugzilla.redhat.com/show_bug.cgi?id=2072905
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update the default "driver" value for hostdev interface since
the default is not "KVM" anymore (refer to "Host device
asssignment" part and by test results). And update the mac
address in one xml example.
Signed-off-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces the logic to format and parse remote NVRAM.
Update NVRAM element schema, and docs for supporting network backed
NVRAM. NVRAM backed over network would give the flexibility to start
the VM on any host without having to worry about where to get the latest
nvram image.
<nvram type='network'>
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi-nopool/0'>
<host name='example.com' port='6000'/>
</source>
</nvram>
or
<nvram type='file'>
<source file='/var/lib/libvirt/nvram/guest_VARS.fd'/>
</nvram>
In the qemu driver we will support the new definition only with qemu's
supporting -blockdev.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
As of v7.0.0-877-g70ac26b9e5 QEMU exposes its default event loop
for devices with no IOThread assigned as an QMP object. In the
very next commit (v7.0.0-878-g71ad4713cc) it was extended for
thread-pool-min and thread-pool-max attributes. Expose them under
new <defaultiothread/> element.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At least in case of QEMU an IOThread is actually a pool of
threads (see iothread_set_aio_context_params() in QEMU's code
base). As such, it can have minimal and maximal number of worker
threads. Allow setting them in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Certain documentation bits tried to put a reference of a value into
quotes, but that's not needed for both the pure view of the rST source
and the rendered output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Once we are already using the new anchor format we can create the link
via a local reference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The role was used to pass through raw HTML to define custom anchor
names. Since all of the document was now converted to use the anchors
generated from headers we can remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
