Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new vfio-pci device option 'display=on/off/auto'.
This patch introduces the necessary capability.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.10, it's possible to use a new type of display -
egl-headless which uses drm nodes to provide OpenGL support. This patch
adds a capability for that. However, since QEMU doesn't provide a QMP
command to probe it, we have to base the capability on specific QEMU
version.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.
All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versionshttps://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson
Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.
Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.
Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The tls, x509 and x509verify options were deprecated in QEMU v2.5.0:
commit 3e305e4a4752f70c0b5c3cf5b43ec957881714f7
Author: Daniel P. Berrange <berrange@redhat.com>
ui: convert VNC server to use QCryptoTLSSession
Use the tls-creds-x509 object when available.
https://bugzilla.redhat.com/show_bug.cgi?id=1598167
Signed-off-by: Ján Tomko <jtomko@redhat.com>
QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When VIR_DOMAIN_SCHEDULER_GLOBAL_PERIOD is matched "cputune.global_period"
should be updated and not "cputune.period".
Signed-off-by: Katerina Koukiou <kkoukiou@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1600427
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since commit f14c37, virDomainConfVMNWFilterTeardown is reporting errors
thus any previously reported error gets overwritten.
We need to save the errors in qemuDomainAttachNetDevice before calling
this function when we are in cleanup code.
https://bugzilla.redhat.com/show_bug.cgi?id=1598311
Signed-off-by: Katerina Koukiou <kkoukiou@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591732
On kernels without device mapper support there won't be
/dev/mapper/control. Therefore it doesn't make much sense to
put it into devices CGroup.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit id fac0dacd was trying to make things more robust;
however, the ATTRIBUTE_NONNULL(1) would be for the @mon,
not the intended (2) and the @props argument as described
in the commit message.
Found by Coverity build.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Document and check that @props contains a pointer to a json object and
check that both necessary fields are present. Also mark @props as
NONNULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The check whether the object holding secret for decryption of the TLS
environment was wrong and would always attempt to add the object. This
lead to a crash due to recent refactors.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1598015
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If qemu-pr-helper process died while libvirtd was not running no
event is emitted. Therefore, when reconnecting to the monitor we
must check the qemu-pr-helper process status and act accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function fetches status of all pr-managers. So far, qemu
reports only a single attribute "connected" but that fits our
needs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This event is emitted on the monitor if one of pr-managers lost
connection to its pr-helper process. What libvirt needs to do is
restart the pr-helper process iff it corresponds to managed
pr-manager.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than rejecting the user provided path and alias for the
managed PR reservation we will ignore the provided path. The
reason is that migration XML does contain path even for managed
reservations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Users have possibility to disable qemu namespace feature (e.g.
because they are running on *BSD which lacks Linux NS support).
If that's the case we should not try to move qemu-pr-helper into
the same namespace as qemu is in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the new proper location for the read/write error policy selection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for specifying it with the -device frontend was added recently.
Add a capability for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow using -blockdev with RBD we need to support the recently added
RBD authentication.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It builds the string for '-device' from a virDomainDiskDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Aggregate the code for the two separate formats used according to the
machine type and add some supporting code so that the function is
actually readable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBulildFloppyCommandLineOptions built its own version of the -drive
alias. Replace it by qemuAliasDiskDriveFromDisk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further split qemuBuildDiskCommandLine to separate formatting of the
source part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD card hotplug should not be implemented until they can be used via
-blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the semantics to exactly opposite and rename it to
qemuDiskBusNeedsDriveArg. This will be necessary as some devices can't
be used with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sectors read from the backing image need to be written to the top
level image. If a disk is marked read-only the image can't be written.
QEMU handled that by disabling copy_on_read and reporting a warning:
-drive file=/var/lib/libvirt/images/c,format=qcow2,if=none,
id=drive-scsi0-0-1,readonly=on,copy-on-read=on:
warning: disabling copy-on-read on read-only drive
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commit c95f50cb02 we always set a disk format in the
post parse callback so the code that mandates use of explicit format for
shareable disks no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There wasn't an explicit type case to the video type enum in
qemuDomainDeviceDefValidateVideo, _TYPE_GOP was also missing from the
switch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since 133fb140 moved the validation of a video device into a separate
function, the code handling PCI slot assignment for video devices has
been the same for both the primary device and the secondary devices.
Let's merge these and thus handle all the devices within the existing
'for' loop.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU uses a shorthand '-sdl' which maps to '-display sdl'. However, if
there are any options to be passed to SDL, the full command version must
be used. Everything seemingly worked for us until commit 5038b30043
introduced OpenGL support for SDL and added ',gl=on/off' option which as
mentioned above could have never worked with the shorthand version of
the command. Indeed starting a domain with an SDL display and OpenGL
enabled, QEMU produces a rather cryptic error:
-sdl: Could not open 'gl=on': No such file or directory
This patch provides fixes to both the SDL cmdline generation and the
test suite.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adding the 'default' case to our enum-typecasted switches is the current
safety trend, so add it here for mdevs too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It should be the command line helper who takes care of the iteration
rather than the caller.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu changed the output field name for the architecture from 'arch' to
'target'. Note the change and fix the code so that the arch-specific
extraction works.
https://bugzilla.redhat.com/show_bug.cgi?id=1598829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The wraper is quite pointless and also the 'arch' field may depend on
whether query-cpus-fast is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After 6b770f9a3b both @netsource and @srcprops are leaked
because of early return introduced in the commit.
==1812== 644 bytes in 4 blocks are definitely lost in loss record 835 of 885
==1812== at 0x4C2F12F: realloc (vg_replace_malloc.c:785)
==1812== by 0x8846393: xmlSaveUriRealloc (in /usr/lib64/libxml2.so.2.9.8)
==1812== by 0x8846B1C: xmlSaveUri (in /usr/lib64/libxml2.so.2.9.8)
==1812== by 0x5DDA619: virURIFormat (viruri.c:256)
==1812== by 0x56E941B: qemuBuildNetworkDriveURI (qemu_command.c:781)
==1812== by 0x56E979A: qemuBuildNetworkDriveStr (qemu_command.c:859)
==1812== by 0x56F3A0B: qemuBuildSCSIiSCSIHostdevDrvStr (qemu_command.c:4664)
==1812== by 0x56F3D1F: qemuBuildSCSIHostdevDrvStr (qemu_command.c:4732)
==1812== by 0x56F57F7: qemuBuildHostdevCommandLine (qemu_command.c:5337)
==1812== by 0x570303A: qemuBuildCommandLine (qemu_command.c:10376)
==1812== by 0x57604EE: qemuProcessCreatePretendCmd (qemu_process.c:6649)
==1812== by 0x11352A: testCompareXMLToArgv (qemuxml2argvtest.c:566)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12
Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.
https://bugzilla.redhat.com/show_bug.cgi?id=1598440
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU chardevs have a bug which makes the vhostuser backend complain
about lack of support for FD passing when validating the chardev.
While this is ultimately QEMU's responsibility to fix, libvirt needs to
avoid tickling the bug.
Simply disabling chardev FD passing just for vhostuser's chardev is
the most prudent approach, avoiding need for a QEMU version number
check.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are two boolean parameters passed to qemuBuildChrChardevStr,
and soon there will be a third. It will be clearer to understand
from callers' POV if we use named flags instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The vhostuser network backend is only supported with the UNIX domain
socket chardev backend, so passing around chardevStdioLogd is not
required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1598084
When creating a snapshot with --quiesce an async job is grabbed
and just before executing guest fs-freeze command an agent job is
grabbed. This is achieved by calling
qemuDomainObjBeginJobInternal(job = QEMU_JOB_NONE,
agentJob = QEMU_AGENT_JOB_MODIFY);
Since there already is an async job set on the domain (by the
same thread) qemuDomainNestedJobAllowed(priv, job) is consulted
if @job is allowed by job mask. But this function returns false
(meaning sync @job is not allowed) which leads to a deadlock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
from src/qemu/qemu_domain_address.c to src/conf/domain_addr.c
and rename to virDomainCCWAddressSetCreateFromDomain
(rename to have Address in full instead of Addr to follow
the naming convention of other virDomainCCWAddress functions)
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently we format the serial, geometry and error policy on the -drive
backend argument.
QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.
We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.
Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The private data of a virStorageSource which is backing an iSCSI hostdev
may be NULL if no authentication is present. The code handling the
hotplug would attempt to extract the authentication info stored in
'secinfo' without checking if it is allocated which resulted in a crash.
Here we opt the easy way to check if srcPriv is not NULL so that we
don't duplicate all the logic which selects whether the disk source has
a secret.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1597550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This argument is not used anymore. The only function that is
passing non-NULL (qemuDomainSaveMemory) does not actually care
for the value (after 23087cfdb) and every other caller just
passes NULL anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When using domxml-to-native, we must generate CLI args that can be used
in a standalone scenario. This means no FD passing can be used. To
achieve this we must clear the QEMU_CAPS_CHARDEV_FD_PASS capability bit.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The processing code which prepares images should be executed really only
for the images which were detected. The code actually tried to update
the last user-specified layer as well. Thankfully we don't do anything
that would be a problem at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1515533
The @prefix attribute to <ip/> element for interface type user is
optional. Therefore, if left out it has value of zero in which
case we should not check whether it falls into <4, 27> range.
Otherwise we fail parsing domain XML for no good reason.
Broken by commit b62b8090b2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Once we called qemuDomainObjEnterRemote to talk to the destination
daemon during a peer to peer migration, the vm lock is released and we
only hold an async job. If the source domain dies at this point the
monitor EOF callback is allowed to do its job and (among other things)
clear all private data irrelevant for stopped domain. Thus when we call
qemuDomainObjExitRemote, the domain may already be gone and we should
avoid touching runtime private data (such as current job info).
In other words after acquiring the lock in qemuDomainObjExitRemote, we
need to check the domain is still alive. Unless we're doing offline
migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1589730
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The variable is used to store the offline migration capability of the
destination daemon. Let's call it 'dstOffline' so that we can later use
'offline' to indicate whether we were asked to do offline migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1541921
In TCG mode, there are no vCPU threads and thus there's nothing
to be placed into resctrl group. Forbid such configuration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we ever fail to properly set jobinfo->statsType,
qemuDomainJobInfoToParams would return -1 without setting an error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1585108
When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This was lost in c57f3fd2f8. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When updating device it's worth parsing live info too as users
might want to update it as well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Mediated devices of model 'vfio-ccw' are using CCW addresses, so make
sure to call the correct address preparation code for the model.
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove the callbacks that the nwfilter driver registers with the domain
object config layer. Instead make the current helper methods call into
the public API for creating/deleting nwfilter bindings.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.
This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for netsource. This is done here because
qemuBuildNetworkDriveStr has other external callers which
may not expect an escaped comma; however, this particular
command building path needs to perform the escaping for the
hostdev command line, so we do it now to ensure src->path
and src->host->name are covered.
Signed-off-by: Anya Harter <aharter@redhat.com>
If a thread is unable to acquire a job (e.g. because of timeout)
an error is reported and the error message contains reference to
the other thread holding the job. Well, the error message should
report agent job too as it is yet another source of possible
failure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're going to introduce a second HPT-related setting soon,
at which point using a single location to store everything is
no longer going to cut it.
This mostly, but not completely, reverts 3dd1eb3b26.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The UNIX socket FDs were we passing to QEMU inherited a label based on
libvirtd's context. QEMU is thus denied ability to access the UNIX
socket. We need to use the security manager to change our current
context temporarily when creating the UNIX socket FD.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a thread is unable to start a job (e.g. because of timeout)
a warning is printed into the logs. So far, the message does not
contain agent job info. Add it as it might help future debugging.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As qemuMonitorJSONIOProcess will call qemuMonitorJSONIOProcessEvent
which unlocks the monitor mutex, there is some extreme situation,
eg qemu send message to monitor twice in a short time, where the
local viriable 'msg' of qemuMonitorIOProcess could be a wild point:
1. qemuMonitorSend() assign mon->msg to parameter 'msg', which is alse a
local variable of its caller qemuMonitorJSONCommandWithFd(), cause
eventloop to send message to monitor, then wait condition.
2. qemu send message to monitor for the first time immediately.
3. qemuMonitorIOProcess() is called, then wake up the qemuMonitorSend()
thread, but the qemuMonitorSend() thread stuck for a while as cpu pressure
or some other reasons, which means the qemu monitor is still unlocked.
4. qemu send event message to monitor for the second time,
such as RTC_CHANGE event
5. qemuMonitorIOProcess() is called again, the local viriable 'msg' is
assigned to mon->msg.
6. qemuMonitorIOProcess() call qemuMonitorJSONIOProcess() to deal with
the qemu event.
7. qemuMonitorJSONIOProcess() unlock the qemu monitor in the macro
'QEMU_MONITOR_CALLBACK', then qemuMonitorSend() thread get the mutex
and free the mon->msg, assign mon->msg to NULL.
Signed-off-by: Weilun Zhu <zhuweilun@huawei.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591628
Attempting to use the FORCE flag for snapshot-revert was resulting
in failures because qemuProcessStart and qemuProcessStartCPUs were
using QEMU_ASYNC_JOB_START after a qemuProcessStop resulting in an
error when entering the monitor:
error: internal error: unexpected async job 6 type expected 0
So create a local @jobType, initialize to QEMU_ASYNC_JOB_START, and
change to QEMU_ASYNC_JOB_NONE if we end up in the --force path
where the qemuProcessStop is run before a Start and StartCPUs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If the the snapshot revert involves a forced revert option, then
let's not cause startup to change the genid flag in order to signify
that we're still running the same/previous guest and not some
snapshot reversion.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Use and set the @start_flags at the top of the RUNNING and PAUSED
transitions to GEN_VMID | PAUSED.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Promote the @start_flags to the top of the function, a
subsequent patch needs to use it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Make it clearer what asyncJob type was passed and what was expected.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
VMs with hardcoded platform network devices are forced to use old
style '-net nic' command line config. Current we use qemu's vlan
option to hook this with the '-netdev' host side of things.
However since qemu 1.2 there is '-net nic,netdev=X' option for
explicitly referencing a netdev ID, which is more inline with
typical VM commandlines, so let's switch to that
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There are two sets of functions here:
1) some functions talk on both monitor and agent monitor,
2) some functions only talk on agent monitor.
For functions from set 1) we need to use
qemuDomainObjBeginJobWithAgent() and for functions from set 2) we
need to use qemuDomainObjBeginAgentJob() only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that we have agent job we can grab it while freezing/thawing
guest file system before/after doing snapshot.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The point is to break QEMU_JOB_* into smaller pieces which
enables us to achieve higher throughput. For instance, if there
are two threads, one is trying to query something on qemu
monitor while the other is trying to query something on agent
monitor these two threads would serialize. There is not much
reason for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce guest agent specific job categories to allow threads to
run agent monitor specific jobs while normal monitor jobs can
also be running.
Alter _qemuDomainJobObj in order to duplicate certain fields that
will be used for guest agent specific tasks to increase
concurrency and throughput and reduce serialization.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Be more consistent and use 'preparing' instead of 'prepare' here.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When commit 6718132d enforced usage of the cleanup label, it forgot to
set the @ret variable to 0 on "success" exit path.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If measurement retrieval fails we'd forget to call ExitMonitor to unlock
the monitor.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reported-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Since it's being called with QEMU_ASYNC_JOB_NONE which is what
qemuDomainObjEnterMonitor is going to use with the internal helper,
let's use that one instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552092
If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.
The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The aim of this API is to allow the caller to do best effort.
Some functions can work even when acquiring the job fails (e.g.
qemuConnectGetAllDomainStats()). But what they can't bear is
delay if they have to wait up to 30 seconds for each domain that
is processing some other job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The variable is initialized to -1 already. There's no way it can
be overwritten by the time control gets to the line I'm removing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
