Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1658504
This function is called when a domain is starting up (in qemu
driver that is when qemu cmd line is generated). It is used to
translate <disk type='volume'/> to something usable by filling in
virStorageSource (e.g. fetching disk path, or some connection URI
for a network FS). But some of these info are not stored in
status XML and thus the function is called on
qemuProcessReconnect too to reconstruct runtime data. But this
poses a problem because after the first run the mode is set to
'direct', but in the second run this triggers a failure because
mode is valid only for 'iscsi' volumes and not 'iscsi-direct'
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rewrite the code to make usage of some VIR_AUTOFREE logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOFREE there's quite a bit of clean up
possible for now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for VIR_FREE consumers.
In some cases adding or removing blank lines for readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for VIR_AUTOFREE usage, let's remove a couple
of unused variables so that clang compilations won't fail.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOPTR(virBitmap) there's a couple of methods
that we can clean up some now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for virBitmapPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for using auto free mechanism, change to using the
VIR_STEAL_PTR on @def to @ret and of course be sure to properly clean
up @def in cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the new helper when moving around the current node of the XPath
context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Quite a few parts modify the XPath context current node to shift the
scope and allow easier queries. This also means that the node needs
to be restored afterwards.
Introduce a macro based on 'VIR_AUTOCLEAN' which adds a local structure
on the stack remembering the original node along with a function which
will make sure that the node is reset when the local structure leaves
scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function is used by the VIR_AUTOUNREF macro. Prior art is to
clear the pointer even if the variable goes out of scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'd free only the first element of the vector leaking the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We don't need it as there's a separate macro for auto-freeing of string
lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use of VIR_AUTOPTR and virString is confusing as it's a list and not a
single pointer. Replace it by VIR_AUTOSTRINGLIST as string lists are
basically the only sane NULL-terminated list we can have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similar to VIR_AUTOPTR, VIR_AUTOSTRINGLIST defines a list of strings
which will be freed if the pointer is leaving scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Mention my snapshot bug fixes, and the corresponding virsh command-line
parse tweak I added while working on the snapshot bug fixes.
Signed-off-by: Eric Blake <eblake@redhat.com>
The existing qemu snapshot code has a slight bug: if the domain
is currently pmsuspended, you can't use the _REDEFINE flag even
though the current domain state should have no bearing on being
able to recreate metadata state; and conversely, you can use the
_REDEFINE flag to create snapshot metadata claiming to be
pmsuspended as a bypass to the normal restrictions that you can't
create an original qemu snapshot in that state (the restriction
against pmsuspend is specific to qemu, rather than part of the
driver-agnostic snapshot_conf code).
Fix this by checking the snapshot state (when redefining) instead
of the domain state (which is a subset of snapshot states).
Fixes the second problem mentioned in https://bugzilla.redhat.com/1680304
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Both block_size and nb_block are unit32_t and multiplying them overflows
at 4GiB.
Moreover, the iscsi_*10_* APIs use 32bit number of blocks and thus they
can only address images up to 2TiB with 512B blocks. Let's use 64b
iscsi_*16_* APIs instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When fetching LUNs from iscsi server the
virISCSIDirectReportLuns() is called. This function does some
libiscsi calls and then calls virISCSIDirectRefreshVol() over
each LUN found. It's unfortunate that the latter calls
virStoragePoolObjClearVols() as we lose all LUNs processed
in previous iterations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Some of the recent entries deviated from the established
style used throughout the file, so let's fix them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Not exhaustive list of new features, improvements and bugfixes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Jirka reported a bug that with every 'virsh pool-refresh' an
iscsi-direct pool would grow and grow. The problem is that
virISCSIDirectRefreshVol() only adds to def->capacity and
def->allocation but nothing clears it out to begin with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For consistency with other error messages, and the fact that
the object is always called a virDomainSnapshot rather than
a mere virSnapshot, include the word "domain" in the error
message.
Suggested-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 28f8dfdc (1.0.0) added a flag to virDomainGetXMLDesc, but
failed to document its effects. And considering that the
MIGRATABLE flag has been the source of past bugs (CVE-2014-7823,
fixed in commit b1674ad5 (1.2.11), or even cf2d4c60 (1.2.13) where
flag mismatch broke virsh edit), make the wording wishy-washy
enough to discourage using the flag casually, by mentioning that
the resulting XML is more for internal use than for validation
against the schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Due to historical back-compat, bare 'virsh snapshot-create-as'
favors internal snapshots (but can't be used on domains with raw
storage), while 'virsh snapshot-create-as --disk-only' favors
external snapshots. What's more, snapshots created with
--disk-only while the domain was running are marked as snapshot
state 'disk-snapshot', while snapshots created while the domain
was offline are marked as snapshot state 'shutdown' (a
'disk-snapshot' image might not be quiescent, while a 'shutdown'
snapshot always is).
But this leads to some interesting problems: if we create a
--disk-only snapshot of an offline guest, and then immediately try
to 'virsh snapshot-create --redefine' using the resulting XML to
overwrite the existing snapashot in place, things silently succeed,
but 'virsh snapshot-create --redefine --disk-only' fails with an
error message that the snapshot state is not 'disk-only'. Worse,
if we delete the snapshot metadata first and then try to recreate
things, omitting --disk-only fails because the verification code
wants to force the default of an internal snapshot (which doesn't
work with raw disks), and using --disk-only still fails because the
snapshot XML is not 'disk-only' - making it impossible to recreate
the snapshot metadata (or to transfer it from one libvirtd host to
another). Ideally, the presence or absence of the --disk-only
flag, and the presence or absence of an existing snapshot being
overwritten, shouldn't matter; if the XML is valid for one
situation, it should always be valid to redefine the metadata for
that snapshot.
Fix things by uniformly using virDomainSnapshotDefIsExternal()
(caching the results up front, and eliminating other 'if' clauses
now rendered redundant) when deciding whether the XML being
requested for redefinition should permit external or force internal
state capture (we got it right in only one out of three places in
the function).
See also https://bugzilla.redhat.com/1680304; this fixes the
domain-agnostic problems mentioned there, but another patch is
needed to fix further oddities with the qemu driver. I did not
check for sure when the problems were introduced (git blame puts
some affected hunks as far back as 1.0.0), but it was definitely
been broken even before when commit 670e86bf (1.1.4) factored
redefine prep out of qemu code into the common snapshot_conf code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Upcoming patches plan to introduce virDomainCheckpointPtr as a new
object for use in incremental backups, along with documentation on
how incremental backups differ from snapshots. But first, we need
to rename any existing mention of a 'system checkpoint' to instead
be a 'full system snapshot', so that we aren't overloading
the term checkpoint.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The previous patch made it possible to split multiple commands by
adding newline, but not to split a long single command. The sequence
backslash-newline was being used as if it were a quoted newline
character, rather than completely elided the way the shell does.
Again, add more tests, although this time it seems more like I am
suffering from a leaning-toothpick syndrome with all the \.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
I wanted to do a demonstration with virsh batch mode, which
takes multiple commands all packed into a single argument:
$ virsh -c test:///default 'echo a; echo b;'
a
b
but that produced a really long line, so I tried to make it
more legible:
$ virsh -c test:///default '
echo a;
echo b;
'
error: unknown command: '
'
Let's be more like the shell, and treat unquoted newline as a
command separator just as we do for semicolon. In fact, with
that, I can even now mix styles:
$ virsh -c test:///default '
echo a; echo b
echo c
'
a
b
c
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
vcpupin will fail when maxvcpus is larger than current
vcpu:
virsh vcpupin win7 --vcpu 0 --cpulist 5-6
error: Requested operation is not valid: cpu affinity is not supported
win7 xml in the command above is like below:
...
<vcpu current="3" placement="static">8</vcpu>
...
The reason is vcpu[3] and vcpu[4] have zero tids and should not been
compared as valid situation in qemuDomainRefreshVcpuInfo().
This issue is introduced by commit 34f7743, which fix recording of vCPU
pids for MTTCG.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Added GPFS as shared file system recognized during live migration
security checks.
GPFS is 'IBM General Parallel File System' also called
'IBM Spectrum Scale'
BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1679528
Signed-off-by: Diego Michelotto <diego.michelotto@cnaf.infn.it>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The structure used to handle network entries was based on 'if,else'
conditions. This commit converts this ugly structure into a switch to
clearify each option of the handler.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract out the network "type" processing into it's own method
rather than inline within lxcNetworkParseDataSuffix.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit removes the full network entry setting: "lxc.network.X" to
type only. Like "type", "name", "flags", etc. This will handle entries
regardless of whether they are prefixed by "lxc.network." (today) or
"lxc.net.X." (the future).
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor lxcNetworkWalkCallback to be a simple method to handle
both possible network settings with indexes or the simple one. It is
better the decouple the whole algorithm to parse data to only parse
which entry type libvirt is handling.
The new method is responsible to verify is the settings correspond to
network entry. Right now, it is only verifying "lxc.network.", but in
the future, it can be used to verify "lxc.net.X." too. Any other case
would be rejected.
On the other hand, the idea here is working only with types. If we know
that entry is part of network settings, after we just need to know which
type is. It keeps the handler simple.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new method called lxcNetworkParseDataIPs() is responsible to handle
IPv{4,6} settings now. The idea is let lxcNetworkWalkCallback() method
handle all entries related to network definition only.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
libvirt_iohelper is used internally by the virFileWrapperFd APIs;
more specifically, in the QEMU driver we have the doCoreDump() and
qemuDomainSaveMemory() helper functions as users, and those in turn
end up being called by the implementation of several driver APIs.
By calling virReportError() if libvirt_iohelper has failed, we
overwrite whatever generic error message QEMU might have raised
with the more useful one generated by the helper program.
After this commit, the user will be able to see the error directly
instead of having to dig in the journal or libvirtd log.
https://bugzilla.redhat.com/show_bug.cgi?id=1578741
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virFileWrapperFdFree(), like all free functions, is supposed
to only release allocated resources, so error reporting is
better suited for virFileWrapperFdClose().
This reverts commit b0c3e93180.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we're reporting errors in virFileWrapperFdFree(),
but that's hardly the appropriate place to do so, as free
functions are supposed to do nothing more than release
allocated resources.
We want to move that code back into virFileWrapperFdClose(),
but before we can do that we need to make sure the function
is actually called every time we're done processing the
wrapped file. The cleanup path is the obvious candidate.
In a couple of cases we can just move the call, but for the
remaining ones we need to duplicate it instead in order not
to alter the existing behavior. We do, however, make sure
that in all cases a failure to properly close the wrapper
results in the overall operation being reported as failed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll want to use this function in the cleanup path soon,
and in order to be able to do that we need to make sure we
can call it multiple times on the same virFileWrapperFd
without side effects.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virDomainChrSourceDefFree with virObjectUnref.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
