The daemon-conf test script continues to be very fragile to
changes in libvirt. It currently fails 1 time in 3/4 due
to race conditions in startup/shutdown of the test script.
Replace it with a proper test case tailored to the code
being tested
* tests/Makefile.am: Remove daemon-conf, add libvirtdconftest
* tests/daemon-conf: Delete obsolete test
* tests/libvirtdconftest.c: Test config file handling
Otherwise, 'make check' breaks since commit bc1ff160 deleted
qparams.h. A later patch will ensure that viruri takes over
what qparams used to do.
* tests/qparamtest.c (mymain): Delete, now that we have viruri.
* tests/Makefile.am (check_PROGRAMS, TESTS, qparamtest_SOURCES):
Delete old test.
* .gitignore: Add recent test additions.
The file daemon/probes.h used to be generated as part of a build, but
is no longer used. However, a stale copy of it lying around could
cause a build to fail. Removing it from .gitignore will make it more
likely someone will notice that they have it lying around.
QMP commands don't need to be escaped since converting them to json
also escapes special characters. When a QMP command fails, however,
libvirt falls back to HMP commands. These fallback functions
(qemuMonitorText*) do their own escaping, and pass the result directly
to qemuMonitorHMPCommandWithFd. If the monitor is in json mode, these
pre-escaped commands will be escaped again when converted to json,
which can result in the wrong arguments being sent.
For example, a filename test\file would be sent in json as
test\\file.
This prevented attaching an image file with a " or \ in its name in
qemu 1.0.50, and also broke rbd attachment (which uses backslashes to
escape some internal arguments.)
Reported-by: Masuko Tomoya <tomoya.masuko@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
Fix a build failure:
virt-host-validate.c: In function 'main':
virt-host-validate.c:82:5: error: implicit declaration of function 'setlocale' [-Werror=implicit-function-declaration]
virt-host-validate.c:82:5: error: nested extern declaration of 'setlocale' [-Werror=nested-externs]
virt-host-validate.c:82:20: error: 'LC_ALL' undeclared (first use in this function)
* tools/virt-host-validate.c: Add <locale.h>.
* .gitignore: Ignore built executable.
On RHEL5, I got:
util/virrandom.c:66: warning: nested extern declaration of '_gl_verify_function66' [-Wnested-externs]
The fix is to hoist the verify earlier. Also some other hodge-podge
fixes I noticed while reviewing Dan's recent series.
* .gitignore: Ignore new test.
* src/util/cgroup.c: Bump copyright year.
* src/util/virhash.c: Fix typo in description.
* src/util/virrandom.c (virRandomBits): Mark doc comment, and
hoist assert to silence older gcc.
The keepalive program has two procedures: PING, and PONG.
Both are used only in asynchronous messages and the sender doesn't wait
for any reply. However, the party which receives PING messages is
supposed to react by sending PONG message the other party, but no
explicit binding between PING and PONG messages is made. For backward
compatibility neither server nor client are allowed to send keepalive
messages before checking that remote party supports them.
Add a test for the simple parts of my indentation changes, and
fix the fallout.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/Makefile.am (domainsnapshotxml2xmltest_SOURCES): Build it.
* src/conf/domain_conf.c (virDomainSnapshotDefFormat): Avoid NULL
deref, match documented order.
* src/conf/domain_conf.h (virDomainSnapshotDefFormat): Add const.
* tests/domainsnapshotxml2xmlout/all_parameters.xml: Tweak output.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Likewise.
* tests/domainsnapshotxml2xmlout/full_domain.xml: Likewise.
* .gitignore: Exempt new binary.
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.
To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt
* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
tests/shunloadtest.c: A test case to unload libvirt while
a thread is still running.
Add a generator script to generate the structs and serialization
information for OpenWSMAN.
openwsman.h collects workarounds for problems in OpenWSMAN <= 2.2.6.
There are also disabled sections that would use ws_serializer_free_mem
but can't because it's broken in OpenWSMAN <= 2.2.6. Patches to fix
this have been posted upstream.
I did 'git add .' while in the middle of 'make syntax-check', and
it picked up a temporary file that should not be committed.
* .gitignore: Ignore sc_* from syntax check.
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim
const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
virKeycodeSet to_offset,
int key_value);
* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h
Commit 8665f85 introduced a slight regression in doc generation,
since make only quits a rule on the first failed command ending
with a newline rather than a semicolon.
* docs/Makefile.am (html/index.html): Don't use xmllint unless
xsltproc succeeded.
* .gitignore: Ignore recently updated stamp file name.
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work
As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.
* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
This patch defines the basics of a generic RPC protocol in XDR.
This is wire ABI compatible with the original remote_protocol.x.
It takes everything except for the RPC calls / events from that
protocol
- The basic header virNetMessageHeader (aka remote_message_header)
- The error object virNetMessageError (aka remote_error)
- Two dummy objects virNetMessageDomain & virNetMessageNetwork
sadly needed to keep virNetMessageError ABI compatible with
the old remote_error
The RPC protocol supports method calls, async events and
bidirectional data streams as before
* src/Makefile.am: Add rules for generating RPC code from
protocol & define a new libvirt-net-rpc.la helper library
* src/rpc/virnetprotocol.x: New generic RPC protocol
Stop storing the generated files for the remote protocol client
and server in source control. The generated files will still be
included in the result of 'make dist' to avoid end-users needing
to generate the files
Signed-off-by: Eric Blake <eblake@redhat.com>
Unfortunately, this means that the strings marked for translation
in generated files are not picked up by gnulib's syntax-check,
I'm working on fixing that in gnulib.
* .gitignore, cfg.mk, po/POTFILES.in: Reflect deletion.
Make it so we don't have to 'git add -f' particular files like
po/POTFILES.in all the time (tested by fixing one of our
special-case files as part of the patch).
* .gnulib: Update to latest.
* bootstrap: Resync from coreutils.
* .gitignore: Sort whitelist entries correctly, including ignoring
files rather than directories.
* m4/virt-compile-warnings.m4: Convert tabs to space.
Split the bit acinclude.m4 file into smaller pieces named
as m4/virt-XXXXX.m4
* .gitignore: Ignore gettext related files
* acinclude.m4: Delete
* m4/virt-compile-warnings.m4: Checks for GCC compiler flags
* m4/virt-pkgconfig-back-compat.m4: Backcompat check for
pkgconfig program
Allows bootstrap to work on FreeBSD, where gzip doesn't have a '.'
in its version; and silences false positives in the new
'make syntax-check' rule.
* .gnulib: Update to latest.
* bootstrap: Synchronize to upstream.
* .x-sc_bindtextdomain: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* .gitignore: Regenerate per latest bootstrap, anchor entries that
are only in the root directory, and consolidate entries from other
generated .gitignore files.
* build-aux/.gitignore, m4/.gitignore, po/.gitignore: Remove from
version control, since bootstrap generates them.
A missing shell was noisy, and the use of command to decipher a
shell's absolute path requires "" rather than ''.
* configure.ac (lv_cv_wrapper_shell): Fix logic errors if candidate
shell is not available.
* .gitignore: Ignore file created when /bin/sh is old dash.
Reported by Matthias Bolte.
'./autobuild.sh' with lcov installed discovered that our
coverage support has been bit-rotting for a while. This
restores it back to a successful state, although I have
not yet spent any time looking through the resulting files to
look for low-hanging fruit in the unit test coverage front.
* configure.ac: Clear COMPILER_FLAGS at right place.
* Makefile.am (cov): Newer genhtml no longer likes plain -s.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Don't AC_SUBST
COMPILER_FLAGS; it is a shell variable for use in configure only.
* src/Makefile.am (AM_CFLAGS, AM_LDFLAGS): New variables, to make
it easier to provide global flag additions. Use throughout, to
uniformly apply coverage flags.
* .gitignore: Globally ignore gcov output.
* daemon/.gitignore: Simplify.
* src/.gitignore: Likewise.
* tests/.gitignore: Likewise.
Necessary on cygwin, where uid_t and gid_t are 4-byte long rather
than int, causing gcc -Wformat warnings.
* src/util/util.c (virFileOperationNoFork, virDirCreateNoFork)
(virFileOperation, virDirCreate, virGetUserEnt): Cast uid_t and
gid_t before passing to printf.
* .gitignore: Ignore Windows executables.
Removes some auto-generated files still under version control.
It also moves the rule for generating NEWS into the Makefile.am
that's in the same directory as the output file to avoid confusion
* docs/libvirt-api.xml, docs/libvirt-refs.xml, NEWS: Remove
auto-generated files from source control
* Makefile.am: Add rule for generating NEWS file
* docs/Makefile.am: Remove rule for generating NEWS file
When "git pull" (or any other operation) brings in a new version of the
gnulib git submodule, you must rerun the autogen.sh script. With this
change, "make" now fails and tells you to run ./autogen.sh, when needed.
* autogen.sh: Maintain a new file, .git-module-status, containing
the current submodule status. If it doesn't exist or its content
is different from what "git submodule status" prints, then run
./bootstrap
* .gitignore: Add .git-module-status
* cfg.mk: Diagnose out of date submodule and fail.
* README-hacking: Update not to mention bootstrap.
* Makefile.am (MAINTAINERCLEANFILES): Add .git-module-status,
so that "make maintainerclean" will remove it.
* bootstrap (modules): Add gnumakefile and maintainer-makefile.
* GNUmakefile: Remove file, now provided by gnulib.
* Makefile.maint: Remove. Replaced by maint.mk from gnulib.
.gitignore: Add GNUmakefile and maint.mk.
* cfg.mk (prev_version_file): Disable this feature.
Setting this to /dev/null avoids an otherwise harmless diagnostic.
This makes it so we record (via a git submodule)
a snapshot of whatever version of gnulib we're using,
and none of gnulib sources are in the libvirt repository.
The result is that we have as much reproducibility as when
we version-controlled imported copies of the gnulib sources,
but without the hassle of the manual process we used when
syncing with upstream.
Note that when you clone libvirt, you get only the libvirt
repository, but when you first run ./bootstrap, it clones
gnulib (at the SHA1 recorded via the submodule), creating
the .gnulib/ hierarchy. Then, the bootstrap script runs
gnulib-tool to populate gnulib/ with the files that make
up the selected modules.
Put the following in your ~/.gitconfig file.
[alias]
syncsub = submodule foreach git pull origin master
The update procedure is simple:
git syncsub
...build & test...
git commit -m 'gnulib: sync submodule to latest' .gnulib
* .gitmodules: New file.
* .gnulib: Initialize.
* bootstrap: Set up to use the new submodule.
Stop using --no-vc-files.
Don't remove .gitignore files.
Don't use or create .cvsignore.
Diagnose an invalid --gnulib-srcdir=DIR argument.
* build-aux/vc-list-files: Delete file, now pulled from gnulib.
* build-aux/useless-if-before-free: Likewise.
* po/POTFILES.in: Remove gnulib/lib/gai_strerror.c, since
it no longer contains translatable strings.
* gnulib/*: Remove gnulib/ hierarchy.
