Commit Graph

317 Commits

Author SHA1 Message Date
Daniel P. Berrange
cf2ed25c9a Fix initial hypervisor conditionals
The openvz, virtualbox and vmware drivers do not run inside
libvirtd, therefore they should be grouped with the other
client side drivers
2012-04-04 10:54:20 +01:00
Daniel P. Berrange
899bf6680a Remove bogus xen-devel dep from libvirt-devel RPM
The public libvirt API does not have any application visible
dependency on Xen libraries. The xen-devel dependency is thus
bogus
2012-04-04 10:54:10 +01:00
Daniel P. Berrange
726e391d37 Introduce per-hypervisor virtual RPMs
Introduce a set sub-RPMs, one per hypervisor, which can be used
as dependency targets by applications wishing to pull in the
full stack of packages required for a specific hypervisor. This
avoids the application needing to know what the hypervisor specific
package set is.

ie, applications should not need to know that using the libvirt
Xen hypervisor requires the 'xen' RPM - libvirt should take care
of that knowledge. All the application wants is 'libvirt-daemon-xen'

There are 5 sub-RPMs:

  libvirt-daemon-qemu - non-native TCG based emulators
  libvirt-daemon-kvm  - native KVM hypervisor
  libvirt-daemon-uml  - User Mode linux
  libvirt-daemon-xen  - Xen, either via XenD or libxl
  libvirt-daemon-lxc  - Linux native containers

When driver modules get turned on, these sub-RPMs will also
gain dependencies on the appropriate driver module .so files
2012-04-04 10:53:49 +01:00
Daniel P. Berrange
bb14513465 Split config files & daemon off from main daemon RPM
Take the libvirt RPM and split it into three pieces

 - libvirt-daemon - libvirtd & other mandatory bits for its operation
 - libvirt-daemon-config-network - the virbr0 config definition
 - libvirt-daemon-config-nwfilter - the firewall config rules

For backwards compatibility with existing installs / application RPM
deps, the 'libvirt' RPM is retained, but will have a dependency on
the 3 new RPMs.
2012-04-04 10:53:35 +01:00
Daniel P. Berrange
189fbe1a8f Remove API XML files from libvirt RPM
The API XML files are now formally installed as part of the
libvirt-devel RPM. Thus there is no need to include them as
%doc in the main libvirt RPM
2012-04-04 10:52:39 +01:00
Daniel P. Berrange
524ba61d9b Move all documentation into a -docs sub-RPM
Currently documentation is split between the libvirt RPM and the
libvirt-devel RPM. In the client-only build there is no libvirt
RPM, so the docs need to live elsewhere. The obvious answer is a
dedicated libvirt-docs RPM. For back-compatibility make the
libvirt-devel RPM require the libvirt-docs RPM

* libvirt.spec.in: Create separate libvirt-docs RPM
2012-04-04 10:52:39 +01:00
Daniel Veillard
782afa98e4 Release of libvirt 0.9.11
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated a number of languages translation including new
  indian languages and regenerated
2012-04-03 15:06:37 +08:00
Daniel Veillard
683e011137 Revert "Refactor the libvirt RPM daemon pieces"
This reverts commit 06a0d57f5a.
2012-04-03 14:49:31 +08:00
Daniel P. Berrange
8bf0442e83 Fix client only RPM build & other misc RPM problems
* libvirt.spec.in: Remove obsolete --with-remote-pid-file arg.
  Add missing %{without_libxl} statement. Fix handling of docs
  in client only build. Put systemtap files in -client RPM
  instead of -daemon RPM
* examples/xml/nwfilter/Makefile.am: Don't install examples if
  nwfilter is disabled.
2012-03-31 13:22:40 +01:00
Daniel P. Berrange
06a0d57f5a Refactor the libvirt RPM daemon pieces
There are a number of flaws with our packaging of the libvirtd
daemon:

 - Installing 'libvirt' does not install 'qemu-kvm' or 'xen'
   etc which are required to actually run the hypervisor in
   question
 - Installing 'libvirt' pulls in the default configuration
   files which may not be wanted & cause problems if installed
   inside a guest
 - It is not possible to explicitly required all the peices
   required to manage a specific hypervisor

This change takes the 'libvirt' RPM and and changes it thus

 - libvirt: just a virtual package with dep on libvirt-daemon,
   libvirt-daemon-config-network & libvirt-daemon-config-nwfilter
 - libvirt-daemon: the libvirt daemon and related pieces
 - libvirt-daemon-config-network: the default network config
 - libvirt-daemon-config-nwfilter: the network filter configs
 - libvirt-docs: the website HTML

We then introduce some more virtual (empty) packages

 - libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu'
 - libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm'
 - libvirt-daemon-lxc: Deps on libvirt-daemon
 - libvirt-daemon-uml: Deps on libvirt-daemon
 - libvirt-daemon-xen: Deps on libvirt-daemon & 'xen'

 - libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-config-{network,nwfilter}
 - libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-config-{network,nwfilter}
 - libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-config-{network,nwfilter}
 - libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-config-{network,nwfilter}
 - libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-config-network

My intent in the future is to turn on the driver modules by
default, at which time 'libvirt-daemon' will cease to include
any specific drivers, instead we'll get libvirt-daemon-driver-XXXX
packages for each driver. The libvirt-daemon-XXX packages will
then pull in each driver that they require.

It is recommended that applications required a locally installed
libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or
'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon"
or 'Requires: libvirt'

* libvirt.spec.in: Refactor RPMs
* docs/packaging.html.in, docs/sitemap.html.in: Document
  new RPM split rationale
2012-03-31 12:20:38 +01:00
Osier Yang
beb76e3742 spec: Add missed dependancy for numad
numad is available since Fedora 17 and RHEL6.X. And it's not supported
on s390[x] and ARM.
2012-03-24 09:35:20 +08:00
Li Zhang
8120325750 Add qemu support for ppc64 on FC16 or above for rpm packaging
On Fedora16 or above, qemu is supported now. So it is added
in rpm packaging.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2012-03-23 12:40:13 -04:00
Martin Kletzander
801a60ff88 Fixed service handling in specfile
After adding the libvirt-guests service into usual runlevels, we used
to start the libvirt-guests service. However this is usually not a
good practice. As mentioned on fedoraproject wiki, the installations
can be in changeroots, in an installer context, or in other situations
where we don't want the services autostarted.
2012-02-24 16:31:04 -07:00
Peter Robinson
cb8b9963fe spec: use ix86 macros
* libvirt.spec.in: Use %{ix86} rather than open-coded list.
2012-02-20 09:37:52 -07:00
Michal Privoznik
286088567d storage: Allow runtime detection of scrub
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
2012-02-16 09:09:43 +01:00
Daniel P. Berrange
5452e88c32 Fix typos in API XML file paths
* libvirt.pc.in: Add missing '/api/' in path
* libvirt.spec.in, mingw32-libvirt.spec.in: s/apis/api/
2012-02-15 11:29:38 +00:00
Daniel P. Berrange
c95c90ee4a Install API XML desc to a standard location
Language bindings may well want to use the libvirt-api.xml and
libvirt-qemu-api.xml files to either auto-generate themselves,
or sanity check the manually written bindings for completeness.
Currently these XML files are not installed as standard, merely
ending up as a %doc file in the RPM.

This changes them to be installed into $prefix/share/libvirt/apis/
The *-refs.xml files are not installed, since those are only
useful during generation of the online API doc files.

The pkg-config file is enhanced so that you can query the install
location of the API files. eg

  # pkg-config --variable=libvirt_qemu_api libvirt
  /home/berrange/builder/i686-pc-mingw32/sys-root/mingw/share/libvirt/libvirt-qemu-api.xml

* docs/Makefile.am: Install libvirt-api.xml & libvirt-qemu-api.xml
* libvirt.pc.in: Add vars for querying API install location
* libvirt.spec.in, mingw32-libvirt.spec.in: Include API XML files
2012-02-14 16:42:02 +00:00
Daniel Veillard
bca060a363 Release of libvirt-0.9.10
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: update ja, it and uk localization, fixed the ja one
2012-02-13 22:31:31 +08:00
Laine Stump
60f190735c build: don't require avahi during install
See: https://bugzilla.redhat.com/show_bug.cgi?id=785269

The specfile requires avahi during install if libvirt was built with
avahi support, but there are many situations where it is undesirable
to install avahi due to security concerns. This patch requires only
the avahi-libs package, which is needed by libvirt to call the
function that tries to attach to the avahi daemon, but will instead
silently fail because the avahi-daemon is in the main avahi package,
and that package isn't installed.
2012-02-07 14:24:05 -05:00
Daniel P. Berrange
54a38915d8 Add a virt-host-validate command to sanity check HV config
To assist people in verifying that their host is operating in an
optimal manner, provide a 'virt-host-validate' command. For each
type of hypervisor, it will check any pre-requisites, or other
good recommendations and report what's working & what is not.

eg

  # virt-host-validate
  QEMU: Checking for device /dev/kvm                                         : FAIL (Check that the 'kvm-intel' or 'kvm-amd' modules are loaded & the BIOS has enabled virtualization)
  QEMU: Checking for device /dev/vhost                                       : WARN (Load the 'vhost_net' module to improve performance of virtio networking)
  QEMU: Checking for device /dev/net/tun                                     : PASS
   LXC: Checking for Linux >= 2.6.26                                         : PASS

This warns people if they have vmx/svm, but don't have /dev/kvm. It
also warns about missing /dev/vhost net.
2012-01-27 17:53:18 +00:00
Daniel Veillard
450c927d9a Remove dmidecode dependancy outside PC arches
The new dependancy is only available on ix86, x86_64 and ia64
2012-01-18 00:22:17 +08:00
Daniel Veillard
2f667b5697 Release of libvirt-0.9.9
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations from transifex and regenerated
2012-01-07 12:18:06 +08:00
Daniel Veillard
cbc7025942 Require avahi as an rpm dependancy
As seen in https://bugzilla.redhat.com/show_bug.cgi?id=746111

If compiled with the daemon and avahi support, then it's better
to require avahi at the rpm level to avoid daemon startup errors.
2011-12-29 22:01:57 +08:00
Wen Congyang
6e53293812 spec: fix inverted logic on sanlock
Commit d336dbdb tried to refactor sanlock to avoid building it
on RHEL for architectures where it is not available, but used
the wrong conditional.

* libvirt.spec.in (with_sanlock): Use %ifarch, not %ifnarch.
2011-12-14 10:31:30 -07:00
Eric Blake
3b95f284f1 spec: fix logic bug in deciding to turn on cgconfig
https://bugzilla.redhat.com/show_bug.cgi?id=738725

Commit ecd8725 tried to silence a spurious warning on the initial
libvirt install, and commit ba6cbb1 tried to fix up the logic to the
correct Fedora version, but the warning was still present due to a
logic bug: since %{fedora} and %{rhel} are never simulatanously
set, then 0%{rhel} <= 6 made the %if always true.  Checking for
minimum versions (via >=) is okay, but checking for maximum versions
(via <=) requires a prerequisite test that the platform being tested
is non-zero.

Also fix a bogus setting of with_libxl (although we previously
hard-code with_libxl to 0 for rhel earlier in the file, so this
was not as severe a bug).

* libvirt.spec.in (with_cgconfig): Don't enable cgconfig on F16.
2011-12-08 13:52:54 -07:00
Eric Blake
9c417636c4 spec: make it easier to autoreconf when building rpm
Over time, Fedora and RHEL RPMs have often backported upstream
patches that touched configure.ac and/or Makefile.am; this
necessitates rerunning the autotools for the patch to be effective.
Making this a one-liner spec tweak will make it easier for future
backports to pull patches without having to find all the places
to touch to properly use the autotools.  Meanwhile, there have been
historical instances where an update in the autotools caused FTBFS
situations, so this is not on by default.

* libvirt.spec.in (enable_autotools): New variable, default off.
(BuildRequires): Conditionally add autotools.
(%build): Conditionally use them before configure.
* mingw32-libvirt.spec.in: Likewise.
2011-12-08 09:49:50 -07:00
Daniel P. Berrange
011a3350be Ensure to prefix %{buildroot} when overriding systemd install location
The %makeinstall macro does not set DESTDIR, instead of explicitly
prefixes %{buildroot} onto all paths. Thus we need to do the same
when setting the systemd unit dir

* libvirt.spec.in: Prefix %{buildroot} onto %{unitdir}
2011-12-08 15:48:49 +00:00
Daniel Veillard
7c6b0653f3 Release of libvirt-0.9.8
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: fetched localization update and regenerated
2011-12-08 15:13:50 +08:00
Eric Blake
fea83dde7b spec: don't use chkconfig --list
https://bugzilla.redhat.com/show_bug.cgi?id=694403 reports that
the specfile is incorrectly checking for a running libvirt-guests
service.  For example,

$ LC_ALL=es_ES chkconfig --list libvirt-guests
libvirt-guests 	  0:desactivado		 1:desactivado	   2:desactivado     3:activo	 4:activo  5:activo	    6:desactivado

will fail to find 5:on, even though it is active.  But chkconfig
already has a mode where you can silently use the exit status to
check for an active service.

* libvirt.spec.in (%post): Use simpler chkconfig options, to avoid
issues with localization.
2011-12-07 20:54:07 -07:00
Eric Blake
d336dbdb33 spec: fix sanlock dependency
* libvirt.spec.in (with_sanlock): On RHEL, don't force sanlock
on architectures where it isn't available.
2011-12-05 11:29:32 -07:00
Eric Blake
e7dfa468f9 spec: add dmidecode as prereq
https://bugzilla.redhat.com/show_bug.cgi?id=754909 complains that
because libvirt didn't require dmidecode, that the logs are noisy
and virConnectGetSysinfo needlessly fails.  Even 'virt-what' requires
dmidecode, so it's not that onerous of a dependency.  We may be
able to drop this in the future when we move to parsing sysfs data,
but for now, listing the dependency will help matters.

* libvirt.spec.in (Requires): Sort Requires before BuildRequires.
Add dmidecode.
2011-12-05 11:00:45 -07:00
Eric Blake
764574f7c7 spec: mark directories in /var/run as ghosts
We have several directories that are created on the fly, and which
only contain state relevant to a running libvirtd process (all
located in /var/run).  Since the directories are created as needed,
and make no sense without a running libvirtd, we want them deleted
if libvirt is uninstalled.  And in F15 and newer, /var/run is on
tmpfs (forcing us to recreate on the fly); which means that someone
trying to verify a complete rpm will fail if the directory does not
currently exist because libvirtd has not been started since boot.
The solution, then, is to mark the directories as %ghost, so that
rpm knows that we own them and will clean it up if libvirt is
uninstalled, but will no longer create the directory for us at
install, nor complain at verify time if the directory does not exist.

See https://bugzilla.redhat.com/show_bug.cgi?id=656611.

* libvirt.spec.in (%files): Add %ghost to temporary directories
that we don't install, but want cleaned up on libvirt removal.
2011-12-01 10:56:10 +08:00
Srivatsa S. Bhat
e352b16400 Export KVM Host Power Management capabilities
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.

The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.

However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.

To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
2011-11-22 11:31:22 +08:00
Daniel P. Berrange
4789fb2e4e Add support for systemd init service
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.

The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.

Instead of

  ./configure --with-init-script=redhat

You can now do

  ./configure --with-init-script=systemd

Or better still:

  ./configure --with-init-script=systemd+redhat

We can also now support install of the upstart init script

* configure.ac: Add systemd, and systemd+redhat options to
  --with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
  with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
  and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
2011-11-18 16:16:02 +00:00
Daniel P. Berrange
a132fb0925 Disable numactl on ARM architectures too
* libvirt.spec.in: Disable numactl on ARM
2011-11-10 11:33:17 +00:00
Daniel P. Berrange
c1df2c14b5 Remove usage of brctl command line tool
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.

Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed

* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
2011-11-09 16:33:53 +00:00
Daniel Veillard
ab4823a062 Release of libvirt-0.9.7
* confiure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: update localizations and rebuilt
2011-11-08 14:55:25 +08:00
Daniel P. Berrange
f33b5792f7 Create /var/lib/libvirt/filesystems for LXC trees
We already have a /var/lib/libvirt/images for OS install images.
We need a separate /var/lib/libvirt/filesystems for OS install
trees, since SELinux labelling will be different

* libvirt.spec.in: Add /var/lib/libvirt/filesystems
* src/Makefile.am: Create /var/lib/libvirt/filesystems
2011-11-01 18:40:37 +00:00
Daniel P. Berrange
777ffbd0e2 Allow for URI aliases when connecting to libvirt
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.

It allows one parameter

 uri_aliases = [
   "hail=qemu+ssh://root@hail.cloud.example.com/system",
   "sleet=qemu+ssh://root@sleet.cloud.example.com/system",
 ]

Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES

* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
  with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
  with no scheme
2011-10-19 09:14:34 +01:00
Eric Blake
df92bab4a8 spec: mingw cleanups
* libvirt.spec.in (%configure): Drop unused %{one} macro.
* mingw32-libvirt.spec.in (%{rhel}): Compile ESX but not HyperV on
mingw build for RHEL.
(%build): Make configure honor spec conditionals.  Reorder to
match libvirt.spec.
* autobuild.sh (mingw): Update list to match.
Suggested by Daniel P. Berrange.
2011-10-13 09:21:02 -06:00
Eric Blake
bbbdc14854 build: fix 'make rpm'
Since commit ddf3bd3, 'make rpm' failed with:

RPM build errors:
    File not found: /home/remote/eblake/rpmbuild/BUILDROOT/libvirt-0.9.6-1.fc14.eblake1318366440.x86_64/usr/share/systemtap/tapset/libvirtd.stp

* libvirt.spec.in (with_dtrace): Match installed .stp files.
2011-10-11 15:44:55 -06:00
Dan Horák
099dc93b7c disable xenlight for non-Xen platforms
when building libvirt in Fedora/s390x I've found that xenlight needs to
be explicitly disabled in the spec file. Configure properly sets the
library as non-existent, but the %files section still wants to package
the 3 /var/*/libvirt/libxl directories. See also
https://bugzilla.redhat.com/show_bug.cgi?id=745020
2011-10-11 14:24:18 -06:00
Eric Blake
5298551e07 init: raise default system aio limits
https://bugzilla.redhat.com/show_bug.cgi?id=740899 documents that
if qemu uses aio=native for its disks, then it consumes 128 aio
requests per disk.  On a host with multiple guests, this can quickly
run out of kernel aio requests with the default aio-max-nr of
65536.  Kernel developers have confirmed that there is no up-front
cost to raising this limit (a larger limit merely implies that more
aio requests can be issued in parallel, which in turn will result
in more kernel memory allocation, only if the system really does use
that many requests).  Since the system default limit prevents 256
disks, which is well within libvirt's current scalability, this
patch installs a file to raise the limit and document it in case a
system administrator has further cause to tune the limit.  The
install only works on platforms new enough to source /etc/sysctl.d/*
alongside /etc/sysctl.conf (F14 and RHEL 6).

* daemon/libvirtd.sysctl: New file.
* daemon/Makefile.am (EXTRA_DIST): Ship it.
(install-init, uninstall-init): Install it.
* libvirt.spec.in (%files): Include it in rpm.
2011-10-05 14:49:35 -06:00
Eric Blake
ba6cbb182b spec: F15 still uses cgconfig, RHEL lacks hyperv
Commit ecd8725c dropped attempts to probe the cgconfig service on
new enough Fedora where systemd took over that aspect of the system,
but mistakenly used F14 instead of F15 as the cutoff point.

https://bugzilla.redhat.com/show_bug.cgi?id=741358

Also, RHEL does not include HyperV support yet.

* libvirt.spec.in (with_cgconfig): Check cgconfig service in F15.
(%{?rhel}): Provide default for with_hyperv.
2011-09-27 09:03:26 -06:00
Daniel Veillard
508de7eedb Release of libvirt-0.9.6 2011-09-22 14:53:23 +08:00
Daniel Veillard
a362f1f7aa Release of libvirt-0.9.5
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: fetch updated translations from transifex and rebuilt
2011-09-20 14:17:47 +08:00
Daniel P. Berrange
19ff0ddfbb Update to require sanlock 1.8 for license compliance
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.

For all this we require sanlock >= 1.8

* configure.ac: Check for sanlock_client.so instead of sanlock.so
  and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
  sanlock_align
2011-09-20 11:18:54 +08:00
Eric Blake
ecd8725c1a spec: silence warnings when installing in F16
https://bugzilla.redhat.com/show_bug.cgi?id=738725 documents that
'yum install libvirt' in Fedora 16 is rather noisy.  This fixes
the problems.

* libvirt.spec.in (%post client): Silence chkconfig warning about
SysV services.
(%post) [with_cgconfig]: Drop for Fedora 15 and newer, where
systemd does this automatically.
2011-09-17 06:27:00 -06:00
Michal Privoznik
a73e92ba08 spec: Require augeas for sanlock
Even though we BuildRequire augeas in some cases, we need to require
it even after if we build with sanlock. virt-sanlock-cleanup use it.
2011-09-15 17:08:59 +02:00
Osier Yang
8918fc8edf qemu_api: Update libvirt spec file 2011-09-14 11:39:02 +08:00