https://bugzilla.redhat.com/show_bug.cgi?id=1047234
Add a range check for supported numa memory placement modes provided by
the user before setting them in the domain definition. Without the check
the user is able to provide a (yet) unknown mode which is then stored in
the domain definition. This potentially causes a NULL dereference when
the defintion is formatted into the XML.
To reproduce run:
virsh numatune DOMNAME --mode 6 --nodeset 0
The XML will then contain:
<numatune>
<memory mode='(null)' nodeset='0'/>
</numatune>
With this fix, the command fails:
error: Unable to change numa parameters
error: invalid argument: unsupported numa_mode: '6'
Add whitespace to separate logical code blocks, reformat error messages
and clean up code flow.
This patch changes error handling in some cases where the the loop would
be continued to jump to cleanup instead and error out rather than modify
the domain any further.
For dead domains that have no memtune limits, we return 0 instead of
"unlimited", this patch fixes it to return PARAM_UNLIMITED.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1035108
When attempting to enable more vCPUs in the guest than is currently
enabled in the guest but less than the maximum count for the VM we
currently reported an unhelpful message:
error: internal error: guest agent reports less cpu than requested
This patch changes it to:
error: invalid argument: requested vcpu count is greater than the count
of enabled vcpus in the domain: 3 > 2
Ever since the subcpusets(vcpu,emulator) were introduced, the parent
cpuset cannot be modified to remove the nodes that are in use by the
subcpusets.
The fix is to break the memory node modification into three steps:
1. assign new nodes into the parent,
2. change the nodes in the child nodes,
3. remove the old nodes on the parent node.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009880
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035188
Commit f094aaac48a6 changed the PCI device assignment in qemu domains
to default to using VFIO rather than legacy KVM device assignment
(when VFIO is available). It didn't change which driver was used by
default for virNodeDeviceDetachFlags(), though, so that API (and the
virsh nodedev-detach command) was still binding to the pci-stub
driver, used by legacy KVM assignment, by default.
This patch publicizes (only within the qemu module, though, so no
additions to the symbol exports are needed) the functions that check
for presence of KVM and VFIO device assignment, then uses those
functions to decide what to do when no driver is specified for
virNodeDeviceDetachFlags(); if the vfio driver is loaded, the device
will be bound to vfio-pci, or if legacy KVM assignment is supported on
this system, the device will be bound to pci-stub; if neither method
is available, the detach will fail.
Currently the snapshot code did not check if it actually supports
snapshots on various disk backends for domains. To avoid future problems
add checkers that whitelist the supported configurations.
When doing an internal snapshot on a VM with sheepdog or RBD disks we
would not set a flag to mark the domain is using internal snapshots and
might end up creating a mixed snapshot. Move the setting of the variable
to avoid this problem.
The virsh command 'domxml-to-native' (virConnectDomainXMLToNative())
converts all network devices to "type='ethernet'" in order to make it
more likely that the generated command could be run directly from a
shell (other libvirt network device types end up referencing file
descriptors for tap devices assumed to have been created by libvirt,
which can't be done in this case).
During this conversion, all of the netdev parameters are cleared out,
then specific items are filled in after changing the type. The MAC
address was not one of these preserved items, and the result was that
mac addresses in the generated commandlines were always
00:00:00:00:00:00.
This patch saves the mac address before the conversion, then
repopulates it afterwards, so the proper mac addresses show up in the
commandline.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
For attach/detach of controller devices, we rename the functions to
remove 'PCI' from their title. The actual separation of PCI-specific
operations will be handled in the next patch.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/qemu/qemu_cgroup.c: Consistently use commas.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If the managedsave image is corrupted, e.g. the XML part is, we fail to
parse it and throw an error, e.g.:
error: Failed to start domain jms8
error: XML error: missing security model when using multiple labels
This is okay, as we can't really start the machine and avoid undefined
qemu behaviour. On the other hand, the error message doesn't give a
clue to users what should they do. The consensus here would be to thrown
a warning to logs saying "Hey, you've got a corrupted file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The following sequence
1. Define a persistent QMEU guest
2. Start the QEMU guest
3. Stop libvirtd
4. Kill the QEMU process
5. Start libvirtd
6. List persistent guests
At the last step, the previously running persistent guest
will be missing. This is because of a race condition in the
QEMU driver startup code. It does
1. Load all VM state files
2. Spawn thread to reconnect to each VM
3. Load all VM config files
Only at the end of step 3, does the 'virDomainObjPtr' get
marked as "persistent". There is therefore a window where
the thread reconnecting to the VM will remove the persistent
VM from the list.
The easy fix is to simply switch the order of steps 2 & 3.
In addition to this though, we must only attempt to reconnect
to a VM which had a non-zero PID loaded from its state file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/qemu.
* src/qemu/qemu_bridge_filter.h (networkAllowMacOnPort)
(networkDisallowMacOnPort): Use intended type.
* src/qemu/qemu_bridge_filter.c (networkAllowMacOnPort)
(networkDisallowMacOnPort): Likewise.
* src/qemu/qemu_command.c (qemuBuildTPMBackendStr)
(qemuBuildTPMDevStr, qemuBuildCpuArgStr)
(qemuBuildObsoleteAccelArg, qemuBuildMachineArgStr)
(qemuBuildSmpArgStr, qemuBuildNumaArgStr): Likewise.
* src/qemu/qemu_conf.c (qemuSharedDeviceEntryCopy): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSaveImageStartVM): Likewise.
* src/qemu/qemu_hostdev.c
(qemuDomainHostdevNetConfigVirtPortProfile): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONAttachCharDevCommand): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for managed save although
it shares most of the backend code.
This configuration knob is there to override default listen address for
-incoming for all qemu domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=994364
Whenever we check for ABI stability, we have new xml (e.g. provided by
user, or obtained from snapshot, whatever) which we compare to old xml
and see if ABI won't break. However, if the new xml was produced via
virDomainGetXMLDesc(..., VIR_DOMAIN_XML_MIGRATABLE) it lacks some
devices, e.g. 'pci-root' controller. Hence, the ABI stability check
fails even though it is stable. Moreover, we can't simply fix
virDomainDefCheckABIStability because removing the correct devices is
task for the driver. For instance, qemu driver wants to remove the usb
controller too, while LXC driver doesn't. That's why we need special
qemu wrapper over virDomainDefCheckABIStability which removes the
correct devices from domain XML, produces MIGRATABLE xml and calls the
check ABI stability function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case A)
While activeScsiHostdevs and webSocketPorts were allocated in
qemuStateInitialize, they were not freed in qemuStateCleanup.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The return value of virDomainControllerFind >=0 means that
the specific controller was found.
But some functions invoke it and treat 0 as not found.
This patch fix these incorrect invocation.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
virDomainSetBlockIoTuneEnsureACL was incorrectly called after we already
started a job. As a result of this, the job was not cleaned up when an
access driver had forbidden the action.
If the ABI compatibility check with the "migratable" user XML is
successful, we would leak the originally parsed XML from the user that
would not be used in this case.
Reported by Ján Tomko.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
In the original implementation of external checkpoints I've mistakenly
used the live definition to be stored in the save image. The normal
approach is to use the "migratable" definition. This was discovered when
commit 07966f6a8b5ccb5bb4c716b25deb8ba2e572cc67 changed the behavior to
use a converted XML from the user to do the compatibility check to fix
problem when using the regular machine saving.
As the previous patch added a compatibility layer, we can now change the
type of the XML in the image.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
External checkpoints have a bug in the implementation where they use the
normal definition instead of the "migratable" one. This causes errors
when the snapshot is being reverted using the workaround method via
qemuDomainRestoreFlags() with a custom XML. This issue was introduced
when commit 07966f6a8b5ccb5bb4c716b25deb8ba2e572cc67 changed the code to
compare "migratable" XMLs from the user as we should have used
migratable in the image too.
This patch adds a compatibility layer, so that fixing the snapshot code
won't make existing snapshots fail to load.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
When reverting a live internal snapshot with a live guest the ABI
compatiblity check was comparing a "migratable" definition with a normal
one. This resulted in the check failing with:
revert requires force: Target device address type none does not match source pci
This patch generates a "migratable" definition from the actual one to
check against the definition from the snapshot to avoid this problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1006886
Osier Yang pointed out that ever since commit 31cb030, the
signature of qemuDomainObjEndJob was changed to return a bool.
While comparison against 0 or > 0 still gives the right results,
it looks fishy; we also had one place that was comparing < 0
which is effectively dead code.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny): Fix dead
code bug.
(qemuMigrationBegin): Use more canonical form of bool check.
* src/qemu/qemu_driver.c (qemuAutostartDomain)
(qemuDomainCreateXML, qemuDomainSuspend, qemuDomainResume)
(qemuDomainShutdownFlags, qemuDomainReboot, qemuDomainReset)
(qemuDomainDestroyFlags, qemuDomainSetMemoryFlags)
(qemuDomainSetMemoryStatsPeriod, qemuDomainInjectNMI)
(qemuDomainSendKey, qemuDomainGetInfo, qemuDomainScreenshot)
(qemuDomainSetVcpusFlags, qemuDomainGetVcpusFlags)
(qemuDomainRestoreFlags, qemuDomainGetXMLDesc)
(qemuDomainCreateWithFlags, qemuDomainAttachDeviceFlags)
(qemuDomainUpdateDeviceFlags, qemuDomainDetachDeviceFlags)
(qemuDomainBlockResize, qemuDomainBlockStats)
(qemuDomainBlockStatsFlags, qemuDomainMemoryStats)
(qemuDomainMemoryPeek, qemuDomainGetBlockInfo)
(qemuDomainAbortJob, qemuDomainMigrateSetMaxDowntime)
(qemuDomainMigrateGetCompressionCache)
(qemuDomainMigrateSetCompressionCache)
(qemuDomainMigrateSetMaxSpeed)
(qemuDomainSnapshotCreateActiveInternal)
(qemuDomainRevertToSnapshot, qemuDomainSnapshotDelete)
(qemuDomainQemuMonitorCommand, qemuDomainQemuAttach)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy)
(qemuDomainBlockCommit, qemuDomainOpenGraphics)
(qemuDomainGetBlockIoTune, qemuDomainGetDiskErrors)
(qemuDomainPMSuspendForDuration, qemuDomainPMWakeup)
(qemuDomainQemuAgentCommand, qemuDomainFSTrim): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Failure to attach to a domain during 'virsh qemu-attach' left
the list of domains in an odd state:
$ virsh qemu-attach 4176
error: An error occurred, but the cause is unknown
$ virsh list --all
Id Name State
----------------------------------------------------
2 foo shut off
$ virsh qemu-attach 4176
error: Requested operation is not valid: domain is already active as 'foo'
$ virsh undefine foo
error: Failed to undefine domain foo
error: Requested operation is not valid: cannot undefine transient domain
$ virsh shutdown foo
error: Failed to shutdown domain foo
error: invalid argument: monitor must not be NULL
It all stems from leaving the list of domains unmodified on
the initial failure; we should follow the lead of createXML
which removes vm on failure (the actual initial failure still
needs to be fixed in a later patch, but at least this patch
gets us to the point where we aren't getting stuck with an
unremovable "shut off" transient domain).
While investigating, I also found a leak in qemuDomainCreateXML;
the two functions should behave similarly. Note that there are
still two unusual paths: if dom is not allocated, the user will
see an OOM error even though the vm remains registered (but oom
errors already indicate tricky cleanup); and if the vm starts
and then quits again all before the job ends, it is possible
to return a non-NULL dom even though the dom will no longer be
useful for anything (but this at least lets the user know their
short-lived vm ran).
* src/qemu/qemu_driver.c (qemuDomainCreateXML): Don't leak vm on
failure to obtain job.
(qemuDomainQemuAttach): Match cleanup of qemuDomainCreateXML.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
