Due to a rather unfortunate misunderstanding, we were parsing the list
of defined devices from mdevctl incorrectly. Since my primary
development machine only has a single device capable of mdevs, I
apparently neglected to test multiple parent devices and made some
assumptions based on reading the mdevctl code. These assumptions turned
out to be incorrect, so the parsing failed when devices from more than
one parent device were returned.
The details: mdevctl returns an array of objects representing the
defined devices. But instead of an array of multiple objects (with each
object representing a parent device), the array always contains only a
single object. That object has a separate property for each parent
device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is possible to define/edit(in shut off state) a domain XML with
same hostdev device repeated more than once, as shown below. This
behavior is not expected. So, this patch fixes it.
vser1:
<domain type='kvm'>
[...]
<devices>
[...]
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0005'/>
</hostdev>
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0006'/>
</hostdev>
[...]
</devices>
</domain>
$ virsh define vser1
Domain 'vser1' defined from vser1
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of providing the configuration explicitly, let libvirt
fill in the blanks. After the recent changes, this results in a
working configuration without the need for user input.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to change the input file later, and having this
additional coverage will demonstrate that such a change does not
alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update the caps data for the upcoming qemu version.
Notable changes are:
- 'query-sev-attestation-report' command added
- 'sample-pages' members for dirty rate calculation added
- 'qtest' device added
- 'share' member added to query-memdev and 'reserve' members added to
query-memdev/memory-backend-[file,memfd,ram]
- 'qemu-vdagent' chardev added
- 'mptcp' toggle added to inet servers
- 'zstd' compression for qcow2
- new cpu models: - "Snowridge-v3"
- "Skylake-Server-v5"
- "Skylake-Client-v4"
- "Icelake-Server-v5"
- "Icelake-Client-v3"
- "Dhyana-v2"
- "Denverton-v3"
- "Cooperlake-v2"
- "Cascadelake-Server-v5"
- 'avx-vnni' added to some existing cpu models
- 'model-id' is now being reported as the host cpu again rather than
QEMU TCG as I've noted in previous bump
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that the minimum supported Xen version has bumped to 4.9, all
uses of LIBXL_HAVE_* that are included in Xen 4.9 can be removed
from the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Next commit will modify the code so that it validates whether
egl-headless is present. Certain tests need to get the egl-headless
capability to keep working properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
egl-headless graphics can be compiled out in qemu so we need to be able
to know whether the given qemu version support it.
Base the capability on the presence of the 'egl-headless' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's just one caller who cares (testQemuMonitorJSONGetTPMModels). Fix
it and remove the counting of elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing and remove the cleanup section.t
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto(GStrv) for clearing the string list and thus remove the
'cleanup' section and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Next commit will modify the code so that it validates whether SDL is
present. Certain tests need to get the SDL capability to keep working
properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
SDL graphics can be compiled out in qemu so we need to be able to know
whether the given qemu version support it.
Base the capability on the presence of the 'sdl' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The command allows to query various display-related options. The absence
of the command will be used to imply certain video-related capabilities
before we would be able to detect them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag isn't used by the code in any way so it can be dropped from the
legacy test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Give the test QEMU_CAPS_CCW instead of QEMU_CAPS_VIRTIO_S390 since the
latter can never be asserted any more. This preserves what the tests
wants to check so that QEMU_CAPS_VIRTIO_S390 can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The devices no longer exist in qemu since the 2.6 release. Drop the
probing of the device properties and fix the data for
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The machine type was removed in qemu 2.6 and no tests now depend on it.
Remove the faking of the machine type support and the capabilities test
for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use the 's390-virtio' machine which was removed in qemu 2.6 and
use real capabilities for the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the console, disk, and network test for the legacy s390 machine
which was removed in qemu 2.6. All of these have 'ccw' equivalents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for sclp console since there isn't any other test for
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for diag288 since there isn't any other test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The switch to internal linebreaking of arguments caused a problem when
generating .args files with VIR_TEST_REGENERATE_OUTPUT as the last
argument isn't terminated with a newline.
Switch to using virCommandToStringBuf and append a newline.
Fixes: 0046e0b1c2
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 6.0.0 introduced `confidential-guest-support` -machine option as
a replacement for `memory-encryption`. In order to test it use 6.0.0
capabilities as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The pc-1.0 machine type was deprecated in QEMU 6.0.0. In our tests we
use 2.12.0 and 6.0.0 replies so switch to pc type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently we only have AMD SEV bits in qemu-2.12.0 replies which is way
too old to test new features that require AMD SEV as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virQEMUCapsProbeQMPMachineProps currently skips any not supported
machine type which includes `none` as well.
In order to start probing that machine type we need to add an exception
to not skip it when probing QEMU capabilities.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Memory on a NUMA node can have a side caches. Configuring these
for a domain was implemented in v6.6.0-rc1~249 and friends.
However, up until now mgmt applications did not really know what
values to pass because we were not exposing caches of the host.
With recent enough kernel these are exposed under sysfs and with
a bit of parsing we can extend our capabilities XML. The sysfs
structure is documented in kernel's
Documentation/admin-guide/mm/numaperf.rst and basically maps in
1:1 fashion to our virNumaCache structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Ideally, turning pointers into g_auto* would be done in one step
and dropping cleanup label and unused @ret variable in second
step, but since this is a test we don't care that much, do we?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
"openvzutilstest" links, amongst others, against "libvirt_openvz.a" and
"libvirt.so". The latter also links against "libvirt_openvz.a", leading
to a One-Definition-Rule violation for "openvzLocateConfFile" in
"openvz_conf.c".
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When other preloaded libraries wrap and / or make calls to `realpath`
(e.g. LLVM's AddessSanitizer), the second parameter is no longer
guaranteed to be NULL.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag will be used for the device virtio-gpu-gl-pci which is introduced
since QEMU 6.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "spawnDaemon" and "binary" parameters are co-dependant, with the
latter non-NULL, if-and-only-if the former is true. Getting rid of the
"spawnDaemon" parameter simplifies life for the callers and eliminates
an error checking scenario.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the previous commit I've changed what API is called from
'virsh setmem' command. However, since virsh-optparse test is ran
only when expensive tests are enabled I've completely missed that
the expected output for virsh-optparse test must be updated too
as it contains the API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We supported autostart of node devices via an xml element, but this
is not consistent with other libvirt objects which use an explicit API
for setting autostart status. So revert this and implement it as an
official API in a future commit.
The initial support was refactored after merging, so this commit reverts
both of those previous commits.
Revert "virNodeDevCapMdevParseXML: Use virXMLPropEnum() for ./start/@type"
This reverts commit 9d4cd1d1cd.
Revert "nodedev: support auto-start property for mdevs"
This reverts commit 42a5585499.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts parts of commit bb8c3b6120
that added tests for autostart functionality (which will be reverted in
the following commit)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "machine-loadparm-multiple-disks-nets-s390" case now requires the
QEMU_CAPS_CCW feature to pass validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There were two negative tests for the keywrapping feature on s390 when
the feature flag was missing. For now both shared the error message thus
worked fine, but with the upcoming patch to move some disk validation
code from the command line formatter to validation code will change the
error message in case the disk capabilities are missing.
Drop the test cases which don't provide any capability and keep those
that have the disk capabilities present as they are sufficient to prove
the feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
