Commit Graph

555 Commits

Author SHA1 Message Date
Andrea Bolognani
7ad6f8dde0 tests: Add aarch64-tpm test to qemuxml2xml
We're going to change the input file later, and having this
additional coverage will demonstrate that such a change does not
alter the behavior.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-07-01 16:15:05 +02:00
Peter Krempa
21144ed89c tests: qemuxml2xml: Modernize 's390-defaultconsole' case
Don't use the 's390-virtio' machine which was removed in qemu 2.6 and
use real capabilities for the test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-06-15 16:58:22 +02:00
Han Han
3f335a61e0 tests: Tests for virtio-vga-gl and virtio-gpu-gl-pci device
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-11 13:06:58 +02:00
Peter Krempa
2c1f5cb105 tests: Add qemuxml2argv and qemuxml2xml test for <transient shareBacking='yes'>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-05-24 20:38:08 +02:00
Peter Krempa
fac773fab9 schema: Allow '0' offset for a <slice> of <disk>
Using slice to cut off the end of the image is a perfectly vaid
configuration. Use 'unsignedInt' instead of 'positiveInteger' for the
'offset' attribute in the XML schema and modify one test case to cover
this use case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-05-24 20:26:20 +02:00
Kristina Hanicova
cff0444e51 conf: Parse/format XML input type 'evdev'
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-05-21 14:29:09 +02:00
Peter Krempa
1924ef661b qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch
Until we clean up and remove all capabilities which no longer make sense
to have separately, we should use virQEMUCapsInitQMPBasicArch to set the
defaults as it's used by qemuxml2argvtest when testing with fake
capabilities.

This allows us to prevent testing dead code paths with the fake
capability tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-05-03 12:14:44 +02:00
Peter Krempa
48d8996945 qemuxml2xmltest: Remove versioned tests for qemu < 2.11
Drop all the cases pinned to unsupported versions.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-05-03 12:14:44 +02:00
Ján Tomko
12967c3e13 conf: add socket for virtiofs filesystems
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.

<filesystem type='mount'>
  <driver type='virtiofs' queue='1024'/>
  <source socket='/tmp/sock/'/>
</filesystem>

https://bugzilla.redhat.com/show_bug.cgi?id=1855789

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-04-21 15:48:01 +02:00
Luyao Zhong
6213d52384 conf, docs, schema: Add support for 'restrictive' mode in numatune
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.

Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-04-19 11:39:13 +02:00
Peter Krempa
d8f2027a79 qemuxml2xmloutdata: Remove unused symlinks to test XML files
The symlinks are not used by the test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-12 15:55:10 +02:00
Peter Krempa
3f31c4e506 qemuxml2xmloutdata: Remove unused output XML files
The files are no longer referenced by existing test cases. Remove them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-12 15:55:10 +02:00
Daniel P. Berrangé
ffda44030a qemu: wire up command line support for ACPI index
This makes it possible to enable stable NIC device names in most modern
Linux distros.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-04-07 18:11:13 +01:00
Peter Krempa
a6444c8019 qemu: Add per-VM control of deprecation behavior
Similar to the qemu.conf knob 'deprecation_behavior' add a per-VM knob
in the QEMU namespace:

  <qemu:deprecation behavior='...'/>

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-04-06 17:07:56 +02:00
Peter Krempa
ceb00a5ade qemuxml2xmltest: Enable 'qemu-ns' case
The XML formatter validation was missing for this code path.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-04-06 17:07:35 +02:00
Daniel P. Berrangé
8dac0ca1b2 qemu: implement setting of rotation rate for SCSI/IDE disks
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.

When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.

https://bugzilla.redhat.com/show_bug.cgi?id=1498955

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-04-01 15:11:38 +01:00
Daniel P. Berrangé
a9b1375d7d conf: remove duplicated firmware type attribute
The

  <os firmware='efi'>
    <firmware type='efi'>
      <feature enabled='no' name='enrolled-keys'/>
    </firmware>
  </os>

repeats the firmware attribute twice. This has no functional benefit, as
evidenced by fact that we use a single struct field to store both
attributes, while needlessly introducing an error scenario. The XML can
just be simplified to:

  <os firmware='efi'>
    <firmware>
      <feature enabled='no' name='enrolled-keys'/>
    </firmware>
  </os>

which also means that we don't need to emit the empty element
<firmware type='efi'/> for all existing configs too.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-30 10:19:42 +01:00
Kristina Hanicova
511bdb0bb2 qemu: don't raise error upon interface update without <frames/> for <rx/> in coalesce
With this, incomplete XML without <frames/> for <rx/> in coalesce
won't raise error as before. It will leave the coalesce parameter
empty, thanks to passing it as a parameter and return an integer
to indicate error state - previously it returned pointer (or NULL
for both error and incomplete XML).
I also added a test case to test this functionality in the
qemuxml2xmltest.

The code went through some refactoring:
* change of a condition
* addition of a parameter
* change of order, that allowed removal of VIR_FREE
* removal of redundant labels and variables

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1535930
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-03-23 15:37:45 +01:00
Pavel Hrdina
c91fa27306 qemu: implement support for firmware auto-selection feature filtering
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-18 18:42:29 +01:00
Pavel Hrdina
cff524af6c conf: introduce support for firmware auto-selection feature filtering
When the firmware auto-selection was introduced it always picked first
usable firmware based on the JSON descriptions on the host. It is
possible to add/remove/change the JSON files but it will always be for
the whole host.

This patch introduces support for configuring the auto-selection per VM
by adding users an option to limit what features they would like to have
available in the firmware.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-18 18:42:26 +01:00
Daniel P. Berrangé
c99e72d18d qemu: wire up support for common audio backend settings
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:45 +00:00
Daniel P. Berrangé
d96fb5cb31 qemu: add support for generating -audiodev arguments
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).

Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:36 +00:00
Daniel P. Berrangé
e88367095f qemu: populate <audio> element with default config
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable

 - VNC - set to "none", unless passthrough of host env variable is set
 - SPICE - always set to "spice"
 - SDL - always passthrough host env
 - No graphics - set to "none", unless passthrough of host env variable is set

The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.

If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:30 +00:00
Daniel P. Berrangé
6be99c99c5 qemu: support use of <audio> elements
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.

This introduces support for configuring audio backends from the <audio>
elements in the XML config.

The existing default behaviour is now only used if no <audio> element is
present.

All except the 'jack' audio driver are supported via QEMU's old env
variable config.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:26 +00:00
Laine Stump
db64acfbda conf: parse/format <teaming> element in plain <hostdev>
The <teaming> element in <interface> allows pairing two interfaces
together as a simple "failover bond" network device in a guest. One of
the devices is the "transient" interface - it will be preferred for
all network traffic when it is present, but may be removed when
necessary, in particular during migration, when traffic will instead
go through the other interface of the pair - the "persistent"
interface. As it happens, in the QEMU implementation of this teaming
pair (called "virtio failover" in QEMU) the transient interface is
always a host network device assigned to the guest using VFIO (aka
"hostdev"); the persistent interface is always an emulated virtio NIC.

When support was initially added for <teaming>, it was written to
require that the transient/hostdev device be defined using <interface
type='hostdev'>; this was done because the virtio failover
implementation in QEMU and the virtio guest driver demands that the
two interfaces in the pair have matching MAC addresses, and the only
way libvirt can guarantee the MAC address of a hostdev network device
is to use <interface type='hostdev'>, whose main purpose is to
configure the device's MAC address before handing the device to
QEMU. (note that <interface type='hostdev'> in turn requires that the
network device be an SRIOV VF (Virtual Function), as that is the only
type of network device whose MAC address we can set in a way that will
survive the device's driver init in the guest).

It has recently come up that some users are unable to use <teaming>
because they are running in a container environment where libvirt
doesn't have the necessary privileges or resources to set the VF's MAC
address (because setting the VF MAC is done via the same device's PF
(Physical Function), and the PF is not exposed to libvirt's container).

At the same time, these users *are* able to set the VF's MAC address
themselves in advance of staring up libvirt in the container. So they
could theoretically use the <teaming> feature if libvirt just skipped
the "setting the MAC address" part.

Fortunately, that is *exactly* the difference between <interface
type='hostdev'> (which must be a "hostdev VF") and <hostdev> (a "plain
hostdev" - it could be *any* PCI device; libvirt doesn't know what type
of PCI device it is, and doesn't care).

But what is still needed is for libvirt to provide a small bit of
information on the QEMU commandline argument for the hostdev, telling
QEMU that this device will be part of a team ("failover pair"), and
the id of the other device in the pair.

To make both of those goals simultaneously possible, this patch adds
support for the <teaming> element to plain <hostdev> - libvirt doesn't
try to set any MAC addresses, and QEMU gets the extra commandline
argument it needs)

(actually, this patch adds only the parsing/formatting of the
<teaming> element in <hostdev>. The next patch will actually wire that
into the qemu driver.)

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-11 17:15:34 -05:00
Peter Krempa
af53024523 qemuxml2argvdata: luks-disks-source-qcow2: Remove specific machine type
The test doesn't depend on any specific machine type.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-02-09 11:30:19 +01:00
Peter Krempa
5949b8d714 qemuxml2argvdata: disk-cache: Remove specific machine type
The test doesn't depend on any specific machine type.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-02-09 11:30:19 +01:00
Pavel Hrdina
d3f4f01fa7 conf: allow virtio driver attributes for vhostuser disk
All of these options are actually supported by vhostuser disk so
we should allow them to be usable.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-02-08 10:49:59 +01:00
Pavel Hrdina
f00fe96eb0 conf: implement support for vhostuser disk
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-02-03 18:56:34 +01:00
gongwei
976bdfc8e7 conf: add realtime parameter for rtc
Pass the parameter clock rt to qemu to ensure that the
virtual machine is not synchronized with the host time

Signed-off-by: gongwei <gongwei@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-03 10:18:04 +01:00
Boris Fiuczynski
bd112c9e0f qemu: Add virtio related options to vsock
Add virtio related options iommu, ats and packed as driver element attributes
to vsock devices. Ex:

 <vsock model='virtio'>
   <cid auto='no' address='3'/>
   <driver iommu='on'/>
 </vsock>

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-01-29 12:25:49 +01:00
Michal Privoznik
173733b7a8 conf: Introduce virtio-pmem <memory/> model
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.

To express this new model at domain XML level, I've chosen the
following:

  <memory model='virtio-pmem' access='shared'>
    <source>
      <path>/tmp/virtio_pmem</path>
    </source>
    <target>
      <size unit='KiB'>524288</size>
    </target>
    <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
  </memory>

Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2021-01-18 11:53:33 +01:00
Peter Krempa
964650ed2a conf: disk: Parse and format <metadata_cache> also for <mirror>
Commit 154df5840d added support for <metadata_cache> as property of a
<disk>. Since the same parser is used to parse the XML used with
virDomainBlockCopy it starts the copy job with the appropriate cache
configured, but the <mirror> doesn't show this configuration nor it's
preserved if libvirtd is restarted during the mirror.

Add parsing, formatting and tests for <metadata_cache> for a <mirror>.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2021-01-14 18:28:47 +01:00
Peter Krempa
154df5840d conf: Introduce <metadata_cache> subelement of <disk><driver>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.

Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-01-08 15:27:00 +01:00
Ryan Gahagan
08a5dc59c3 tests: Add tests for NFS disk protocol
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-01-08 15:11:15 +01:00
Peter Krempa
9aa1a1ea77 schema: secret: Relax requirements for usage name
There's plenty of existing documentation [1] which shows as example a
name which contains a space and a dot ('client.admin secret') as ceph
usage name.

Use a more relaxed type in the RNG schema since the usage name is
actually just a string used to look up the secret.

[1]:
https://docs.ceph.com/en/latest/rbd/libvirt/#configuring-the-vm
https://documentation.suse.com/ses/6/html/ses-all/cha-ceph-libvirt.html#ceph-libvirt-cfg-vm
Libvirt docs were correct though:
https://libvirt.org/formatsecret.html#CephUsageType

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1689168

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-01-08 09:18:21 +01:00
Eiichi Tsukata
cc6c49f6cd conf: Add support for keeping TPM emulator state
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.

Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:

  <tpm model='tpm-tis'>
    <backend type='emulator' persistent_state='yes'/>
  </tpm>

Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-01-06 11:44:12 +01:00
Peter Krempa
5c004dd16f qemuxml2argvtest: Add 'nvme' disks into the 'disk-slices' case
Test slices on top of nvme-backed disks.

Note that the changes in seemingly irrelevant parts of the output are
due to re-naming the nodenames.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-12-08 15:13:20 +01:00
Daniel Henrique Barboza
198c1eb6b4 qemu_domain.c: align all pSeries mem modules when PARSE_ABI_UPDATE
qemuDomainAlignMemorySizes() has an operation order problem. We are
calculating 'initialmem' without aligning the memory modules first.
Since we're aligning the dimms afterwards this can create inconsistencies
in the end result. x86 has alignment of 1-2MiB and it's not severely
impacted by it, but pSeries works with 256MiB alignment and the difference
is noticeable.

This is the case of the existing 'memory-hotplug-ppc64-nonuma' test.
The test consists of a 2GiB (aligned value) guest with 2 ~520MiB dimms,
both unaligned. 'initialmem' is calculated by taking total_mem and
subtracting the dimms size (via virDomainDefGetMemoryInitial()), which
wil give us 2GiB - 520MiB - 520MiB, ending up with a little more than
an 1GiB of 'initialmem'. Note that this value is now unaligned, and
will be aligned up via VIR_ROUND_UP(), and we'll end up with 'initialmem'
of 1GiB + 256MiB. Given that the dimms are aligned later on, the end
result for QEMU is that the guest will have a 'mem' size of 1310720k,
plus the two 512 MiB dimms, exceeding in 256MiB the desired 2GiB
memory and currentMemory specified in the XML.

Existing guests can't be fixed without breaking ABI, but we have
code already in place to align pSeries NVDIMM modules for new guests.
Let's extend it to align all pSeries mem modules.

A new test, 'memory-hotplug-ppc64-nonuma-abi-update', a copy of the
existing 'memory-hotplug-ppc64-nonuma', was added to demonstrate the
result for new pSeries guests. For the same unaligned XML mentioned
above, after applying this patch:

- starting QEMU mem size without PARSE_ABI_UPDATE:
    -m size=1310720k,slots=16,maxmem=4194304k \ (no changes)

- starting QEMU mem size with PARSE_ABI_UPDATE:
    -m size=1048576k,slots=16,maxmem=4194304k \ (size fixed)

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-12-04 15:38:47 -03:00
Daniel Henrique Barboza
167b5fd6a8 qemu_domain.c: post parse pSeries NVDIMM align with PARSE_ABI_UPDATE
A previous patch removed the pSeries NVDIMM align that wasn't
being done properly. This patch reintroduces it in the right
fashion, making it reliant on VIR_DOMAIN_DEF_PARSE_ABI_UPDATE.
This makes it complying with the intended design defined by
commit c7d7ba85a6.

Since the PARSE_ABI_UPDATE is more restrictive than checking for
!migrate && !snapshot, like is being currently done with
qemuDomainAlignMemorySizes(), this means that we'll align the
pSeries NVDIMMs in two places - in post parse time for new
guests, and in qemuDomainAlignMemorySizes() for all guests
that aren't migrating or in a snapshot.

Another difference is that the logic is now in the QEMU driver
instead of domain_conf.c. This was necessary because all
considerations made about the PARSE_ABI_UPDATE flag were done
under QEMU. Given that no other driver supports ppc64 there is no
impact in this change.

A new test was added to exercise what we're doing. It consists
of a a copy of the existing 'memory-hotplug-nvdimm-ppc64' xml2xml
test, called with the PARSE_ABI_UPDATE flag. As intended, we're
not changing QEMU command line or any XML without the flag,
while the pseries NVDIMM memory is being aligned when the
flag is used.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-12-04 15:38:14 -03:00
Daniel Henrique Barboza
e556b2c616 Revert "domain_conf.c: auto-align pSeries NVDIMM in virDomainMemoryDefPostParse()"
The code to align ppc64 NVDIMMs on post parse was introduced in
commit d3f3c2c97f. That commit failed to realize that we
can't align memory unconditionally. As of commit c7d7ba85a6
("qemu: command: Align memory sizes only on fresh starts"),
all memory alignment should be executed only when we're not
migrating or in a snapshot.

This revert does not break any guests in the wild, given that
ppc64 NVDIMMs are still being aligned in qemuDomainAlignMemorySizes().

Next patch will introduce a mechanism where we can have post
parse NVDIMM alignment for pSeries without breaking the
intended design, as defined by c7d7ba85a6.

This reverts commit d3f3c2c97f.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-12-04 15:35:42 -03:00
Andrea Bolognani
6cfae87359 tests: Simplify some ppc64 tests
We can leave out things like USB controller, memballoon device,
kernel and initrd since they're not the focus of the tests.

Propagating some information from the output files back to the
input files makes it easier to compare them, as it reduces the
resulting diff, and in the case of the qemuxml2xml test for
memory-hotplug-ppc64-nonuma it allows us to convert the output
file into a symlink, since in the specific case the XML doesn't
change at all.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-12-04 15:56:48 +01:00
Andrea Bolognani
d01098db9b tests: Sync some ppc64 tests
The ppc64 tests

  memory-hotplug-ppc64-nonuma
  memory-hotplug-nvdimm-ppc64

are not passed the same information for qemuxml2argv and
qemuxml2xml tests; the former, in particular, doesn't show up
at all in qemuxml2xml. Address this inconsistency.

Note that one of the new output files had been introduced with
5540acb9a2 despite not being actually used as of that commit.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-12-04 15:56:28 +01:00
Tim Wiederhake
ea21b8b87b tests: Add tests for kvm-poll-control feature
Update the KVM feature tests for QEMU's kvm-poll-control performance
hint.

Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-11-17 14:40:54 +01:00
Brian Turek
1d446bd465 qemu: add 'fmode' and 'dmode' options
Expose QEMU's 9pfs 'fmode' and 'dmode' options via attributes on the
'filesystem' node in the domain XML. These options control the creation
mode of files and directories, respectively, when using
accessmode=mapped.

Signed-off-by: Brian Turek <brian.turek@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-11-04 18:25:55 +01:00
Peter Krempa
8bcda6e260 qemu: Add test cases for 'host_cdrom' blockdev backend via <disk>
Simulate that the device is a cdrom when the path equals to /dev/cdrom
to provide testing for the 'host_cdrom' backend.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-11-02 14:14:51 +01:00
Jonathon Jongsma
0b1a05ffb5 qemu: add vdpa support
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2020-10-20 14:48:02 -04:00
Michal Privoznik
9ba99180b3 tests: Turn virtio-options-memballoon-freepage-reporting.xml into a symlink
The output virtio-options-memballoon-freepage-reporting.xml of
xml2xmlout is the same as the input. Make it as symlink to save
space.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-15 10:51:07 +02:00
Nico Pache
4cb5f34905 provide testing for free-page-reporting feature in QEMU
This provides basic testing for the free-page-reporting feature that is
introduced in qemu 5.1.

Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-13 17:02:48 +02:00
Michal Privoznik
9a4568b079 qemuxml2xmloutdata: Make more symlinks
I've found two files under qemuxml2xmloutdata/ that are the same
as in qemuxml2argvdata/. Replace them with symlinks.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2020-10-01 14:53:28 +02:00