Allow the user to manually tweak the ID mapping that will allow
virtiofsd to run unprivileged.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow users to easily resize 'raw' images on block devices to the full
capacity of the block device. Obviously this won't work on file-backed
storage (filling the remaining capacity is most likely wrong) or for
formats with metadata due to the overhead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we use an external search provider instead of a
built-in search functionality might come as a surprise to users,
and some of them might not be comfortable with the arrangement.
Mention it in the search interface to avoid surprises.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Ideally we'd just perform the search ourselves, but as long as
we have to rely on an external provider, at least make it a
somewhat privacy-conscious one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
QEMU gained support for PipeWire audio backend (see QEMU commit
of v8.0.0-403-gc2d3d1c294). Its configuration knobs are basically
the same as pulseaudio's, except for PA's server name. Therefore,
a lot of code is copied over from pulseadio and fixed by
s/Pulse/Pipewire/ or s/pulseaudio/pipewire/.
There's one ley difference to PA though: pipewire daemon is
usually on per user basis (just like our qemu:///session).
Therefore, introduce this 'runtimeDir' attribute, which allows
specifying path to pipewire daemon socket (useful for
qemu:///system for instance).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The need to remove the <loader> and <nvram> elements in order
to make the firmware autoselection process kick in again is
not exactly intuitive, so document it explicitly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The hyperkitty search facility does a massively better job
than google docs for mailing lists.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Move the docs for the <acpi><table> element under a common section as
it's not specific for direct kernel boot. In fact the original use was
for Windows activation.
Fixes: 72f652da63
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Given that this variable now controls not just whether C tests
are built, but also whether any test at all is executed, the new
name is more appropriate.
Update the description for the corresponding meson option
accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, passing -Dtests=disabled only disables a subset of
tests: those that are written in C and thus require compilation.
Other tests, such as the syntax-check ones and those that are
implemented as scripts, are always enabled.
There's a potentially dangerous consequence of this behavior:
when tests are disabled, 'meson test' will succeed as if they
had been enabled. No indication of this will be shown, so the
user will likely make the reasonable assumption that everything
is fine when in fact the significantly reduced coverage might
be hiding failures.
To solve this issues, disable *all* tests when asked to do so,
and inject an intentionally failing test to ensure that 'meson
test' doesn't succeed.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our virBuildPath() constructs a path from given arguments.
Exactly like g_build_filename(), except the latter is more
generic as it uses backslashes on Windows. Therefore, replace the
former with the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since commit 6e9bd600d7 added a new
GitLab job description function handling the integration test suite
process to ci/jobs.sh it should be mentioned in the docs.
This patch splits the 'Run TCK' section in two, giving user the option
to run the integration test suite in their VM environment the same way
as we do in GitLab CI or execute everything manually.
This patch takes the opportunity to also link to the virtiofs kbase
article to give users a different option to get the local libvirt
repositories to be used in testing inside a VM.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's mentioned in an earlier paragraph that Perl bindings in correct
version are needed, but there's no note about libvirt even though it
should be obvious. So make a clear note on that and while at it, do
mention the possibility to get upstream libvirt RPMs from GitLab CI
artifacts if users don't feel like building everything on their own.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The fact that we need ci/helper script to run the workloads remains
true, but the invocation has changed as of commit
eb41e45630 . We also extracted GitLab job
specs into a standalone ci/jobs.sh script which allows execution of any
container job we run in upstream CI locally, unlike the original
functionality which only allowed builds, tests and shell (although
important to say it could be adjusted with the right meson/ninja args).
lcitool also became mandatory as it enables the container execution
which replaced a Makefile we used to have for this purpose.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While wording is still correct to this day, we have already added more
features to lcitool and documented it properly in its repo. Make sure
that we refer the users to lcitool's doc material for further details
on how VMs can be installed locally.
Use the opportunity to bump the OS distro target from Fedora 36 -> 38.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While we may have needed to run TCK through Avocado by explicitly using
the '--tap' option (still possible), we can get a nice output from
Avocado by default leaving the option out which is exactly what we do
inside GitLab CI environment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch mainly fixes an unfinished sentence that was supposed to
describe the LIBVIRT_CI_INTEGRATION_RUNNER_TAG variable, but took the
opportunity to update the description of the other variable too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The documented process should be updated to reflect the new process
once GitLab transitions to it completely and drops the old process
involving registration tokens as hinted by the note.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The actual versioning policy[1] is a bit more nuanced, and in
particular there are scenarios in which the monthly release
is intentionally skipped, but overall it's not inaccurate to
claim that the release cadence of the Go bindings follows the
one of the C library.
[1] https://gitlab.com/libvirt/libvirt-go-module/-/blob/master/VERSIONING.rst
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our test driver lacks implementation for
virConnectGetDomainCapabilities(). Provide one, though a trivial
one. Mostly so that something else than VIR_ERR_NO_SUPPORT error
is returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the ability to specify a path to a ssh-agent socket in order to use
the ssh-agent to authenticate to remote ssh disks. Example
configuration:
<disk type='network'>
</source protocol='ssh' ...>
<identity username='myusername' agentsock='/path/to/socket'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Authenticating via key file to an ssh server is often preferable to
logging in via password. In order to support this functionality add a
new <identity> xml element for ssh disks that allows the user to specify
a keyfile and username. Example configuration:
<disk type='network'>
<source protocol='ssh' ...>
<identity keyfile='/path/to/id_rsa' username='myusername'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to make ssh disks usable, we need to be able to validate a
remote host. To do this, add a <knownHosts> xml element for ssh disks to
allow the user to specify a location for a file that contains known host
keys. Implementation to follow.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Right now, ssh network disks are not usable. There is some basic support
in libvirt that is meant to support disk chains that have backing disks
located at ssh urls, but there is no real way for a user to configure a
ssh-based disk. This commit allows users to configure an ssh disk with
password authentication. Implementation will follow.
<disk type='network'>
<source protocol='ssh' ...>
<auth username='myusername'>
<secret type='iscsi' usage='secretname'/>
</auth>
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Removing a backing image could break other image chains as it's
theoretically possible to share backing chains.
As --storage/--remove-all-storage is fully implemented in virsh as a
helper option, which enumerates and deletes VM's volumes. We do not plan
to make it any more complicated.
Document that backing chains are not removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Meson doesn't interpret what's set in CFLAGS, but rather simply appeds
it to the command line. Thus any logic which is based on the
optimization level will not work.
Note the caveat in the docs and instruct users to use
``--optimization=N`` instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Domain related hook scripts are all fed with domain XML on their
stdin, except for bhyve. Fix this.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have bhyve hook scripts since v6.1.0-rc1~42 but never mention
them in hooks.rst. Fill the blanks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our hooks.rst document existence of libxl hook scripts, but
mentions only qemu and lxc as receivers of full domain XML. But
since their introduction in v2.2.0-rc1~201 they are also given
full domain XML. Fix our wording.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change example logfile path and clarify how complicated all things passt
are. I chose not to create the non-existing directory because it could
open a whole new can of worms.
Also explain missing `dev` attribute of `<portForward/>`
Resolves: https://issues.redhat.com/browse/RHEL-1833
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reverting external snapshot for running VM doesn't work correctly so we
should not report this capability until it is fixed.
This reverts commit de71573bfe.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
--driver can now be used to specify a specific driver to bind to the
device being detached from the host driver (e.g. vfio-pci-igbvf), not
just the *type* of driver (e.g. "vfio" or "xen", which are unnecessary
anyway, since they are implicit in which hypervisor driver is in use)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This introduces the ability to set the discard granularity option
for a disk. It defines the smallest amount of data that can be
discarded in a single operation (useful for managing and
optimizing storage).
However, most hypervisors automatically set the proper discard
granularity and users usually do not need to change the default
setting.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Note the implications and caveats of <disk type='dir'>.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/519
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adds two new commands and a new option:
- 'net-desc' to show/modify network title and description.
- 'net-metadata' to show/modify network metadata.
- Option '--title' for 'net-list' to print corresponding
network titles in an additional column.
- Documentation for all the above.
- XML Fallback function `virshNetworkGetXMLFromNet` for title and
description for compatibility with hosts running older versions
of libvirtd.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds new elements <title> and <description> to the Network XML.
- The <title> attribute holds a short title defined by the user and
cannot contain newlines.
- The <description> attribute holds any documentation that the user
wants to store.
- Schema definitions of <title> and <description> have been moved from
domaincommon.rng to basictypes.rng for use by network and future objects.
- Added Network XML parser logic for the above.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Libvirt supports creating snapshots for a long time but the wording of
the feature may imply that libvirt supports external snapshots in
general but that is not true as users were not able to use APIs to
delete or revert external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We still get MRs in Gitlab from individual contributors on a regular
basis which in some ways just makes maintainer's or reviewer's life
just a bit more complicated. This ultimately means our guidelines are
probably not visible enough on the main page
(or some people wouldn't read them anyway). While this patch can't make
the problem go away, it can at least attempt to mitigate it by creating
a quick link to the 'hacking' page, skipping a lot of TL;DR contents
in contributing.rst which we link from the main page.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
These two attributes are supported for vhost-user-blk as well.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A test case can be part of a test suite (just like we already
have 'syntax-check'). This then allows developers to run only a
subset of tests. For instance - when using valgrind test setup
(`meson test -C _build/ --setup valgrind`) it makes zero sense to
run syntax-check tests or other script based tests (e.g.
check-augeas-*, check-remote_protocol, etc.). What does makes
sense is to run compiled binaries.
Strictly speaking, reaching that goal is as trivial as annotating
only those compiled tests (declared in tests/meson.build) and
running them selectively:
meson test -C _build/ --setup valgrind --suite $TAG
But it may be also desirable to run test scripts separately.
Therefore, introduce two new tags: 'bin' for compiled tests, and
'script' for script based tests and annotate each test()
accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add some additional information about running clangd for LSP when clang
is not your normal compiler.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tim Small <tim@seoss.co.uk>
Minor rewording to clarify purpose of the -C flag in the ninja
invocation, whilst retaining previous meaning.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the explicit meson "setup" command instead of the deprecated
implicit invocation. The implied setup usage generates a warning with
meson version 1.0.1:
WARNING: Running the setup command as `meson [options]` instead of
`meson setup [options]` is ambiguous and deprecated.
Additionally the implicit command is likely to be confusing to those
unfamiliar with Meson - the `build` argument in `meson build` resembles
an action rather than an arbitrary path.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Suggest that new contributors should review past patch submissions for
typical style, feedback etc. prior to submitting. Link to archives.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the preparing patches section, note that it is possible to run CI
tests via gitlab prior to submitting patches.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Clarify that patches should apply cleanly to the master branch. Give
guidance for typical bug fix process for existing releases.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In build environments which use gcc as the default compiler, use of the
clangd LSP server (for enhanced code editing and navigation etc.) with
libvirt requires some additional configuration. Detail this and link
from `hacking.rst`.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "hacking" doc details where to find the code, but not how to compile
it - link to the instructions contained in `compiling.rst`.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two guides to contributing: `hacking.rst` is focused on code
contributions, and `contributing.rst` is more general. Clarify scope of
`hacking.rst` and link to the general guide in its references.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Whilst the "docs" documentation map is linked in the navigation bar,
users may scroll down and lose sight of this, so also place at the
bottom of the "Quick Links" section.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In our passt example XML we use /var/log/passt.log as path to the
log file. This is not optimal, because in case of unprivileged
daemon, neither libvirt nor passt has enough permissions to
create the file. Let's move the file under /tmp.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that also 'non-halting' messages stop the build process.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The '.. meta::' rST directive allows adding header metadata. Move the
specific metadata from page.xsl into the individual files and pass them
through into the header from page.xsl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are/can be overall docs for enums (e.g.
virDomainModificationImpact) not just individual values. But
these never make it into the generated HTML which is a bit
unfortunate as they can contain valuable information for users.
Generate a block with overall enum documentation, just like we do
for functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have plenty of generic typedefs (that basically just alias a
struct, or our popular virXXXPtr). Because we do not generate
HTML docs for it, the documentation is placed at random places,
e.g.: comment from virDomainPtr typedef ("a virDomainPtr is
pointer to a virDomain private structure ...") ends up after
virDomainProcessSignal enum block.
There are some less weird occurrences of this problem (e.g.
virBlkioParameterPtr), but yet - the typedef appears in TOC.
Therefore, generate a block for each typedef and put its
description there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The type='pty' attribute in the <serial> element causes a Pseudo TTY to be
allocated on the host side via "/dev/ptmx", which is meant to be
interacted with via "virsh console" or similar.
That's not how a firmware log is typically viewed or saved. Replace
type='pty' with type='file', and also provide an example <source> element
(with the pathname of the logfile), similarly to how the <serial> example
just above provides a <source> element too.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Updates: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <serial> opening tag is paired with the </console> closing tag; that's
a mismatch. The question is then whether to modify the former to
<console>, or the latter to </serial>.
Per section "Relationship between serial ports and consoles", <serial> is
used for emulated (not paravirt) consoles, and it's the type that's
suitable for early debug output (such as from firmware). Thus, change
</console> to </serial>.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Fixes: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add migrate options: --compression-zlib-level
--compression-zstd-level
These options are used to set compress level for "zlib"
or "zstd" during parallel migration if the compress method
is specified.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Wrap the auto-generated pages (API ref and hvsupport.html) in the proper
top level element similarly to what the pages generated from RST have to
remove the extra case when templating our web.
(Best viewed with 'git show -w')
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we need to generate API docs for multiple input files the index
page is not useful for us and was replaced by a manual one. Drop the XSL
for generating it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The auto-generated index contains only references to one run of the
generator but we in total run it 4 times missing the admin, lxc, and
qemu specific apis.
Rewrite it manually so that we can drop the generator for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the table is not so wide we can treat it as any other page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only remaining page was 'hvsupport.html' which is generated by
'scripts/hvsupport.py'. The script already has all the data to generate
the table of contents internally so we can remove the whole complicated
template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Final piece of conversion of our non-generated pages to 'rst'.
Special raw HTML is used for adding the appropriate code to fetch the
blog planet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only special bit about the 'acl' page was the inclusion of the
objects and permissions tables. We can do that by the '.. raw::'
directive.
One reference from 'aclpolkit.rst' needed to be updated to go with the
new header anchor naming.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the same 'margin-bottom' bot for the normal and mobile layout fixing
one of the panels touching the footer.
Use same font size both for <h1> and <h2> used as the column titles as
rst2html5 based on version can generate either of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the full width of the parent box and drop the unnecessarily bigger
margin.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the '#index' id to select the proper page as the body element
doesn't have 'index' class.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the pages were converted to rST it required changes to how the
panels are created. This change was not reproduced in the specific media
override for narrow displays and thus made those pages unusable.
Note that two lines per document are needed as some rst2html5 versions
format a <div class='section'> and others do a <section> element
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing with such element id. The last mention was removed in
2818359075
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emphasize the various sound card models and other config options by
using ``...``.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer link to it from anywhere, and a server-side
redirect has been created to keep existing external links
working.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>