Commit v5.10.0-269-g62065a6cb5 moved NUMA validation code to domain
definition time and appropriately adjusted affected test cases except
for hugepages-default-system-size. And since we don't mock
virGetSystemPageSizeKB in our tests, hugepages-default-system-size test
would fail on architectures (ppc64le) with default page size other than
4KiB.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On Fedora 31 with GCC 9.2.1, compiling qemuxml2argvtest takes
about 36 seconds since
commit 30c6d99209
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Oct 24 17:51:42 2019 +0200
qemuxml2argvtest: Update host arch for DO_TEST*ARCH* tests
The optimizer is hitting some pathological performance behaviour due to
the high number of branches in the mymain() method.
Pushing the branch tests down into the testCompareXMLToArgv method
brings the compile time down to 3 seconds.
This likely related to this GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58479
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test case for x86_64 and neither cirrus nor vga capability is of the
xml2argv type because it actually fails to parse the XML at all [*] which
is something that xml2xml tests don't seem to handle. xml2argv test fails
to produce a qemu argv for this case which xml2argv tests can handle.
[*] This is a consequence of the decision not to have a fallback if the
obvious choices (cirrus and vga) aren't viable due to missing QEMU caps.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
Some of our tests try to validate domain XMLs they are working
with (not intentionally, simply because they call top level
domain XML parse function). Anyway, this implies that we build
domain capabilities also - see
virQEMUDriverGetDomainCapabilities(). And since some domain XMLs
are type of 'kvm' the control gets through
virQEMUCapsFillDomainCaps() and virHostCPUGetKVMMaxVCPUs() to
opening /dev/kvm which may be missing on the machine we're
running 'make check'.
Previously, we did not see this issue, because it was masked. If
building domain capabilities failed for whatever reason, we
ignored the failure. Only v5.9.0-207-gc69e6edea3 uncovered the
problem (it changed reval from 0 to -1 if
virQEMUDriverGetDomainCapabilities() fails). Since the referenced
commit is correct, we need to mock access to /dev/kvm in our
tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Several tests were not specifying the necessary qemu capabilities for
what they were testing. Due to the way that the video devices are
currently validated, this is not causing any problems. But a change to
video device validation in a following patch would have exposed this
issue and resulted in multiple test failures about the domain
configuration not supporting particular video models.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit fb973cfbb4 added versioned test outputs for the above mentioned
tests but didn't actually enable them. Fix that mistake and fix the
output of the tsc-frequency test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
https://bugzilla.redhat.com/show_bug.cgi?id=1346265
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The video private data was not initializing the vhostuser FD
causing us to attempt to close FD 0 many times over.
Fixes
commit ca60ecfa8c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:36 2019 +0400
qemu: add qemuDomainVideoPrivate
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Check qemu capability, and accept 3d acceleration. 3d acceleration
support is checked when looking for a suitable vhost-user helper.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The fact that qemu is capable -netdev socket is not enough to
start a migratable domain. It also needs dbus-vmstate capability.
Since there are already some qemu releases which have
net-socket-dgram capability and don't have dbus-vmstate we need
to check for dbus-vmstate.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The OOM handling requires special build time options which we never
enable in our CI. Even once enabled the tests are incredibly slow and
typically require manual inspection of the results to weed out false
positives.
Since there was previous agreement to switch to abort on OOM in libvirt
code, there's no point continuing to keep the unused OOM testing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If managed='no', then the tap device must already exist, and setting
of MAC address and online status (IFF_UP) is skipped.
NB: we still set IFF_VNET_HDR and IFF_MULTI_QUEUE as appropriate,
because those bits must be properly set in the TUNSETIFF we use to set
the tap device name of the handle we've opened - if IFF_VNET_HDR has
not been set and we set it the request will be honored even when
running libvirtd unprivileged; if IFF_MULTI_QUEUE is requested to be
different than how it was created, that will result in an error from
the kernel. This means that you don't need to pay attention to
IFF_VNET_HDR when creating the tap devices, but you *do* need to set
IFF_MULTI_QUEUE if you're going to use multiple queues for your tap
device.
NB2: /dev/vhost-net normally has permissions 600, so it can't be
opened by an unprivileged process. This would normally cause a warning
message when using a virtio net device from an unprivileged
libvirtd. I've found that setting the permissions for /dev/vhost-net
permits unprivileged libvirtd to use vhost-net for virtio devices, but
have no idea what sort of security implications that has. I haven't
changed libvrit's code to avoid *attempting* to open /dev/vhost-net -
if you are concerned about the security of opening up permissions of
/dev/vhost-net (probably a good idea at least until we ask someone who
knows about the code) then add <driver name='qemu'/> to the interface
definition and you'll avoid the warning message.
Note that virNetDevTapCreate() is the correct function to call in the
case of an existing device, because the same ioctl() that creates a
new tap device will also open an existing tap device.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.
This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.
0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions
Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
