Typecast the controller type variable and add all cases to the switch
statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-*-(non-)-transitional device models which replace the use of
'disable-legacy'/'disable-modern' features were introduced in qemu-4.0.
This means we can remove the specific parts of the code for formatting
the old-style device options and replace all other code to solely depend
on the QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL is the evolution of
QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY from qemu's point of view. Make sure
that we consider both when assesing whether a device belongs on PCIe.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '<inactiveDomain>' element stores the next-start definition of a VM
on snapshot. It was not covered by the schema when it was introduced.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121276
Fixes: 152c165d34
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all definition under the <domain> element into a separate
definition so that it can be referenced from elements with other names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the overrides into a single file so that later patches can add
another top level element 'inactiveDomain' used in snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code (since 448be8f706) useds 'vport_ops' in XML.
Later commit cc17f09246 added schema for 'vports_ops' (extra 's').
Fix the schema and the corresponding docs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121262
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the full link to the backup XML description page and use the proper
anchor after html->RST coversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Checkpoints created via virDomainCheckpointCreateXML are generally not
very useful as they need to be coupled with a backup.
Add a disclaimer to the docs explaining why users should use
virDomainBackupBegin instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Fix the link target after the conversion of the XML description to RST
which renamed anchors and drop the <a> tag from the C code comment.
Apart from not working properly in the .c file it didn't work in the
generated docs either as the brackets were escaped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Remove the unused source code for the sheepdog storage backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sheepdog project is unmaintained, with last commit in 2018 and
numerous unanswered issues reported.
Remove the libvirt storage driver support for it to follow the removal
of the client support in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add some checks that commit 0225483adc forgot to include.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Openstack developers reported that newly-created mdevs were not
recognized by libvirt until after a libvirt daemon restart. The source
of the problem appears to be that when libvirt gets the udev 'add'
event, the sysfs tree for that device might not be ready and so libvirt
waits 100ms for it to appear (max 100 waits of 1ms each). But in the
OpenStack environment, the sysfs tree for new mediated devices was
taking closer to 250ms to appear and therefore libvirt gave up waiting
and didn't add these new devices to its list of nodedevs.
By changing the wait time to 1 second (max 100 waits of 10ms each), this
should provide enough time to enable these deployments to recognize
newly-created mediated devices, but it shouldn't increase the delay for
more traditional deployments too much.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2109450
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When commit bac6b266fb added this "functionality" this was the only
naming I could think of, but after discussion with Dan we found the name
'null' fits a bit better, so change it before we make a release with the
old name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The most recent environment e.g. present in our Fedora Rawhide builds
fail to build the tree with clang with the following error:
../src/util/virhostcpu.c:1291:25: error: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
The problem seems to be that clang doesn't like the new way the
'entries' field in struct kvm_msrs is declared.
To work around the issue we can simply allocate the variable dynamically
and use the 'entries' member as it was intended to to access the
members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Just like the socket, remove the pidfile when TPM emulator is being stopped. In
order to make this a bit cleaner, try to remove it even if swtpm_ioctl does not
exist.
https://bugzilla.redhat.com/show_bug.cgi?id=2111301
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of separately building the commandline into a string to log,
just wait a few lines until we've built the virCommand object, and
call virCommandToString, which does the same thing.
(As a bonus, we were already calling virCommandToString to put the
commandline in a string in case of a failure when running it - from
the point of view of *that* usage, we're just moving the call to
virCommandToString *up* a few lines, i.e. we now only construct the
commandline string once.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although the next commit will eliminate the one current use of
virFirewallRuleToString(), a future commit will once again have a use
for it, but in a different source file so it will need to be a global
function rather than static. Make that change now so that we don't get
a compile error from having an unused static function in the next
commit.
(The arg list is also changed to include the name of the command as a
separate argument rather than just assuming that it can be derived
from the rule's layer (which is correct for iptables, but won't be
correct for nftables)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was a wrapper to call a function in virfirewalld.c that sends an
iptables passthrough rule to firewalld. It hasn't been used in a year
or two, and won't ever be used in the future since passthrough rules
are only supported for iptables, and we've determined that we
shouldn't use iptables passthrough rules.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to the other drivers, virNetworkDriverState now has a
virObject-derived object called virNetworkDriverConfig which is used
for config items.
As a starting point, the directory paths used by the network driver
are moved there (again, parallelling what is done for other drivers).
Using items in virNetworkDriverConfig is (yes, again) similar to using
items in the other drivers' config - anything in the config object is
immutable (once initialized), so the state object only needs to be
locked while getting a reference to the config object, and then the
members of the config object can be safely used until the config
object is unrefed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is more similar to lxc and qemu drivers, where the driver state
struct is defined along with a config struct in ${driver}_conf.h
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After converting virNetworkDef * to g_autoptr(virNetworkDef) the
cleanup codepath was empty, so it has been removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After converting virNetworkDef * to g_autoptr(virNetworkDef) the
cleanup codepath was empty, so it has been removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCommand module is specifically designed so that no caller
has to check for retval of individual virCommand*() APIs except
for virCommandRun() where the actual error is reported. Moreover,
virCommandNew*() use g_new0() to allocate memory and thus it's
not really possible for those APIs to return NULL. Which is why
they are even marked as ATTRIBUTE_NONNULL. But there are few
places where we do check the retval which is a dead code
effectively. Drop those checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When multiple VFIO or VDPA devices are assigned to a guest, the guest
can fail to start because the guest fails to map enough memory. For
example, the case mentioned in
https://bugzilla.redhat.com/show_bug.cgi?id=2111317 results in this
failure:
2021-08-05T09:51:47.692578Z qemu-kvm: failed to write, fd=31, errno=14 (Bad address)
2021-08-05T09:51:47.692590Z qemu-kvm: vhost vdpa map fail!
2021-08-05T09:51:47.692594Z qemu-kvm: vhost-vdpa: DMA mapping failed, unable to continue
The current memlock limit calculation does not work for scenarios where
there are multiple such devices assigned to a guest. The root causes are
a little bit different between VFIO and VDPA devices.
For VFIO devices, the issue only occurs when a vIOMMU is present. In
this scenario, each vfio device is assigned a separate AddressSpace
fully mapping guest RAM. When there is no vIOMMU, the devices are all
within the same AddressSpace so no additional memory limit is needed.
For VDPA devices, each device requires the full memory to be mapped
regardless of whether there is a vIOMMU or not.
In order to enable these scenarios, we need to multiply memlock limit
by the number of VDPA devices plus the number of VFIO devices for guests
with a vIOMMU. This has the potential for pushing the memlock limit
above the host physical memory and negating any protection that these
locked memory limits are providing, but there is no other short-term
solution.
In the future, there should be have a revised userspace iommu interface
(iommufd) that the VFIO and VDPA backends can make use of. This will be
able to share locked memory limits between both vfio and vdpa use cases
and address spaces and then we can disable these short term hacks. But
this is still in development upstream.
Resolves: https://bugzilla.redhat.com/2111317
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Xen toolstack has gained basic Virtio support recently which becides
adding various virtio related stuff introduces new disk backend type
LIBXL_DISK_BACKEND_STANDALONE [1].
Unfortunately, this caused a regression in libvirt build with Xen support
enabled, reported by the osstest today [2]:
CC libxl/libvirt_driver_libxl_impl_la-xen_xl.lo
../../src/libxl/xen_xl.c: In function 'xenParseXLDisk':
../../src/libxl/xen_xl.c:779:17: error: enumeration value 'LIBXL_DISK_BACKEND_STANDALONE'
not handled in switch [-Werror=switch-enum]
switch (libxldisk->backend) {
^~~~~~
cc1: all warnings being treated as errors
The interesting fact is that switch already has a default branch (which ought
to cover such new addition), but the error is triggered as -Wswitch-enum
gives a warning about an omitted enumeration code even if there is a default
label.
Also there is a similar issue in libxlUpdateDiskDef() which I have reproduced
after fixing the first one, but it that case the corresponding switch doesn't
have a default branch.
Fix both issues by inserting required enumeration item to make the compiler
happy and adding ifdef guard to be able to build against old Xen libraries
as well (without LIBXL_HAVE_DEVICE_DISK_SPECIFICATION). Also add a default
branch to switch in libxlUpdateDiskDef().
Please note, that current patch doesn't implement the proper handling of
LIBXL_DISK_BACKEND_STANDALONE and friends, it is just intended to fix
the regression immediately to unblock the osstest. Also it worth mentioning
that current patch won't solve the possible additions in the future.
[1] https://lore.kernel.org/xen-devel/20220716163745.28712-1-olekstysh@gmail.com/
[2] https://lore.kernel.org/xen-devel/E1oHEQO-0008GA-Uo@osstest.test-lab.xenproject.org/
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer care about any of their properties, there's no need
to call `device-list-properties` on these devices.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2013 by QEMU commit:
commit 398489018183d613306ab022653552247d93919f
pc: limit 64 bit hole to 2G by default
Released in 1.6.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2012 by QEMU commit:
commit 783e9b4826b95e53e33c42db6b4bd7d89bdff147
introduce a new monitor command 'dump-guest-memory' to dump guest's memory
Released in QEMU 1.2.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The DYLD_* environment variables on macOS have the same purpose
as the LD_* variables have on Linux. Since we're preserving the
latter by default, it makes sense to do the same for the former
as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, the tpm->data.emulator.activePcrBanks member was an
unsigned int but since it was used as a bitmap it was converted
to virBitmap type instead. Now, the virBitmap is allocated inside
of virDomainTPMDefParseXML() but only if <activePcrBanks/> was
found with at last one child element. Otherwise it stays NULL.
Fast forward to starting a domain with TPM 2.0 and no
<activePcrBanks/> configured. Eventually,
qemuTPMEmulatorBuildCommand() is called, which subsequently calls
qemuTPMEmulatorReconfigure() and finally
qemuTPMPcrBankBitmapToStr() passing the NULL value. Before
rewrite to virBitmap this function would return NULL for empty
activePcrBanks but now, well, now it crashes.
Fixes: 52c7c31c80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch uses qemuMonitorQueryStats to query "halt_poll_success_ns"
and "halt_poll_fail_ns" for every vCPU. The respective values for each
vCPU are then added together.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Related: https://gitlab.com/libvirt/libvirt/-/issues/276
This patch adds an API for the "query-stats" QMP command.
The query returns a JSON containing the statistics based on the target,
which can either be vCPU or VM, and the providers. The API deserializes
the query result into an array of GHashMaps, which can later be used to
extract all the query statistics. GHashMaps are used to avoid traversing
the entire array to find the statistics you are looking for. This would
be a singleton array if the target is a VM since the returned JSON is
also a singleton array in that case.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since we cannot properly plug a new VM into the distributed switch, we can at
least report the provided pieces of information, so that XML editing still works
even for VMs with such interfaces.
https://bugzilla.redhat.com/show_bug.cgi?id=1988211
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
