The cleanup of the code to always assume support for QEMU_CAPS_BLOCKDEV
will not be simple, so for now we hardcode the support and the code will
be cleaned up gradually.
We also disallow users to clear the flags via the namespace property or
qemu.conf configuration.
The change to the PPC64 test data originates from the fact that the
capability dump is not from the release version but is lacking one of
the necessary flags to enable -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The debug level of gluster backend became configurable in qemu-2.8.
This also removes the only old-style syntax for the 'blockdev-add'
command prior to stabilization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active block commit is supported since qemu-2.0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command is unconditionally supported since
qemu-2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-4.1 will not be supported any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-4.0 will no longer be supported, remove the test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 4.2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
since qemu 6.0, if migration is blocked for some reason, 'query-migrate'
will return an array of error strings describing the migration blockers.
This can be used to check whether there are any devices blocking
migration, etc.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We will need two attributes of usb-host device to set:
guest-reset and guest-resets-all. The former was introduced in
QEMU v4.0.0-rc0~56^2 and the other in v4.2.0-rc1~9^2. Hence,
track the latter only as it's only starting from that commit when
QEMU has both attributes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
My commit of v6.9.0-rc1~457 was a bit too harsh. While it served
its purpose (adding usb-host.hostdevice capability) it has a side
effect: because I copied reply from qemu-5.1.0 to older .replies
files one might now think that say qemu-3.1.0 supports both
.guest-reset and .guest-resets-all properties. But in fact it
doesn't. There are three problematic properties:
1) guest-reset, introduced in v4.0.0-rc0~56^2
2) guest-resets-all introduced in v4.2.0-rc1~9^2
3) suppress-remote-wake introduced in v5.0.0-rc0~148^2~4
Remove these properties from versions that could not have had
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities for that version were not updated from the development
version and thus would fail our upcoming minimum version change. Fake
the data to report 4.2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities for that version were not updated from the development
version and thus would fail our upcoming minimum version change. Fake
the data to report 4.2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability reflects whether QEMU allows setting
thread-pool-min and thread-pool-max attributes on iothread
object. Since both attributes were introduced in the same commit
(v7.0.0-878-g71ad4713cc) and can't exist independently of each
other we can stick with one capability covering both of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
- Icelake-Client cpu model family removed:
"Icelake-Client-noTSX-x86_64-cpu"
"Icelake-Client-v1-x86_64-cpu"
"Icelake-Client-v2-x86_64-cpu"
"Icelake-Client-v3-x86_64-cpu"
"Icelake-Client-x86_64-cpu"
- 'zero-copy-send' migration feature added
- display 'sdl' qapified
- 'arch-lbr' cpu feature added
- new HyperV enlightenments:
'hv-tlbflush-ext'
'hv-tlbflush-direct'
'hv-emsr-bitmap'
'hv-xmm-input'
- 'none-machine' has two new properties:
- "boot" described as "Boot configuration"
- "memory" described as "Memory size configuration"
- 'igd-passthrough-isa-bridge' is now Xen-only
- CXL: Compute eXpress Link related devices:
"CXL"
"cxl-rp",
"cxl-type3",
"pxb-cxl",
"pxb-cxl-bus",
"pxb-cxl-host",
- 'dma-translation' feature of 'intel-iommu'
- 'vmcb-clean' cpu feature now migratable:
- possibly due to host kernel upgrade
- changes commandline generated for the 'cpu-host-model' case of
qemuxml2argvtest
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add POWER10 as a supported cpu model.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All QEMU versions we care about already support migration events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Detect whether qemu supports the qemu-vdagent character device. This
enables support for copy/paste with VNC graphics.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Notable schema changes:
- 'cluster-id' is now reported for CPU topology
- 'display-update' QMP command added
- 'main-loop' QOM object added with a whole set of properties
- 'cpu0-id' field reported in SEV data
- 'blockdev-change-medium' command now has 'force' property
- 'screendump' QMP command now has a 'format' property
- supported formats are 'ppm' and 'png'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are no major changes since 7.0.0-rc2, but a few additional
features are enabled in this build.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Few minor changes in qemu since the last update:
- 'cocoa' display and corresponding props (not present in this build)
Changes in build:
- dbus display driver re-enabled
- gtk display support re-disabled
- xen support re-disabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The capability is not used anymore since "-incoming defer" is supported
by all QEMU versions we care about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce QEMU_CAPS_VIRTIO_RSS capability which tracks
virtio-net.rss attribute introduced in qemu-5.2.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The flag was based on a version check which no longer made sense. Remove
the flag by replacing it's only use by an arch-check which is equivalent
at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the boot-bypass
property of the virtio-iommu-pci device.
This property was only introduced in QEMU 7.0 but, since the
device has been around for much longer, we end up querying its
properties for several more releases. As I don't have convenient
access to the 10+ binaries necessary to regenerate the replies,
I just put some fake data in there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the virtio-iommu-pci
device.
Note that, while this device is present even in somewhat old
versions of QEMU, it's only some recent changes that made it
actually usable for our purposes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
This causes the argument to -device to be generated in JSON
format, same as what 1a691fe1c8 has done for x86_64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
Some of the additional capabilities that show up are a
consequence of more features being enabled in this build than
in the one used to generate the replies initially.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This reverts commit 06c960e477.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
QEMU 7.0.0 adds a new property tsc-clear-on-reset to x86 CPU, corresponding
to Libvirt's <tsc on_reboot="clear"/> element. Plumb it in the validation,
command line handling and tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The prealloc-threads is property of memory-backend class which is
parent to the other three classes memory-backend-{ram,file,memfd}.
Therefore the property is present for all, or none if QEMU is
older than v5.0.0-rc0~75^2~1^2~3 which introduced the property.
Anyway, the .reserve property is the same story, and we chose
memory-backend-file to detect it, so stick with our earlier
decision and use the same backend to detect this new property.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Detect that qemu can override TLS hostname setting for NBD clients.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-2296-g9f0369efb0
Notable changes:
- 'tls-hostname' field for NBD client to override local hostname
- machine types 'pc-i440fx-1.7' and older are now deprecated
- 'snapshot-access' block driver added
- The 'protocol' field of 'set_password' and 'expire_password'
parameter is now an enum instead of a pure string allowing 'vnc' and
'spice' as value and the arguments are also covered by the schema.
- 'copy-before-write' block driver now has a 'bitmap' property
- 'query-migrate' now reports 'precopy-bytes', 'downtime-bytes',
'postcopy-bytes' for 'ram' and 'disk' statistics
- RTC_CHANGE event now has a 'qom-path' property to identify the RTC
- 'umip' cpu feature is now migratable
- SGX property 'section-size' reinstated after regression
Changes in build setting:
- fuse block export support now enabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test dumps for x86_64 and ppc64 were generated from pre-release
qemu-3.0-rc1/rc2 and thus wouldn't pass our minimum version check.
As these are very old, fix the version info we use for our check to 3.1
without re-generating them and keep the version tag intact.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new capability tracks whether virtio-mem device is capable
of memory preallocation, which is detected by the device having
.prealloc attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update existing ppc64 6.2 caps to match what was released in QEMU 6.2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Changes in all 'ppc64-latest.ags' files were needed due to the
JSONification of command line devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Both are supported by qemu-2.11 and later, so we don't have to check for
them explicitly.
Note that QXL is supported only on x86_64, thus on other arches only the
capability for 'virtio-gpu' is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that qemu fixed device unplug when JSON syntax is used with -device
we can re-enable the feature.
Since the old capability string representation is condemned by
suggesting filtering it as a workaround we must introduce a new string.
To achieve this the original capability position is renamed to
X_QEMU_CAPS_DEVICE_JSON_BROKEN_HOTPLUG and a new position with the
original name QEMU_CAPS_DEVICE_JSON is introduced to prevent us having
to change the rest of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-874-g1cd2ad11d3
Notable changes are:
- added flag noting that use of JSON syntax for -device was fixed
- 'dbus' backend for graphics and character devices added
- virtio-mem added 'node' property
- 'clusters' added to CPU topology
- 'open-timeout' property for NBD protocol backend
- 'wheel-left' and 'wheel-right' event types for 'input-send-event'
- increased default resolution to '1280x800' on 'virtio-gpu'
- SGX property 'section-size' changed to 'sections' incompatibly
(unused luckily)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When -device is configured via JSON a bug [1] is triggered in qemu were
the DEVICE_DELETED event for the removal of the device frontend is no
longer delivered to libvirt. Without the DEVICE_DELETED event we don't
remove the corresponding entries in the VM XML.
Until qemu will be fixed we must stop using the JSON syntax for -device.
This patch removes the detection of the capability. The capability is
used only during startup of a fresh VM so we don't need to consider any
compaitibility steps for existing VMs.
For users who wish to use 'libvirt-7.9' and 'libvirt-7.10' with
'qemu-6.2' there are two possible workarounds:
- filter out the 'device.json' qemu capability '/etc/libvirt/qemu.conf':
capability_filters = [ "device.json" ]
- filter out the 'device.json' qemu capability via qemu namespace XML:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
[...]
<qemu:capabilities>
<qemu:del capability='device.json'/>
</qemu:capabilities>
</domain>
We must never again use the same capability name as we are now
instructing users to filter it as a workaround so once qemu is fixed
we'll need to pick a new capability value for it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2036669
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035237
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'sev-inject-launch-secret' qmp command is only available with
qemu >= 6.0.0. Introduce a capability for sev-inject-launch-secret.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Under the qemucapabilitiesdata we have a replies file for
QEMU-3.0.0.ppc64. At least we think so. In fact, the file
contains replies from a development snapshot release that
predates 3.0.0 (specifically it's v2.12.0-1689-g518d23a) and as
such does not reflect any change that was made to QEMU after the
snapshot and before the official relase. One of such changes was
renaming 'exit-preconfig' command to 'x-exit-preconfig' (QEMU
commit v3.0.0-rc1~21^2~3). Ideally, we would just regenerate
capabilities using the official release but since this is a PPC64
machine and pretty old version anyway let's just fix the command
name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This sev-guest object property indicates whether QEMU should
expose the kernel, ramdisk, cmdline hashes to the firmware
for measurement.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu-6.2 is out, update the caps dump for the final time.
Notable changes:
- 'unstable' feature flag for various QMP schema entries
- 'aio-max-batch' iothread property
- 'kernel-hashes' knob for the 'sev-guest' object
- 'native-hotplug' of 'pcie-root-port' is now unstable again
- 'page-sampling/dirty-ring/dirty-bitmap' mode for 'calc-dirty-rate'
- 'toolsversion' field for the 'vmdk' disk format driver
- CPU changes resulting in 'core-capability' being present on the cpu
of the machine this dump was done on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch updates domaincapsdata and qemucapabilitiesdata for ppc64
with qemu commit v6.1.0-1714-gc5b2f55981.
Changes in all 'ppc64-latest.ags' files were needed. The changes are
mundane despite the volume. For all 'ppc64-latest.args' files the
changes are:
- removing '-sandbox' command line;
- 'secret' and 'memory-backend-ram' objects are now using qom-type format;
- '-device' is now using qom-type format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is now unused.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Update to v6.1.0-1735-gc52d69e7db which has Markus' patches for
improvements of enum probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 58ba0f6a3d.
Conflict:
* src/qemu/qemu_capabilities.[ch]
Because other new cap flags had been added since the original
commit, reformatting was necessary to follow the "groups of
five" pattern.
* tests.qemucapabilitiesdata/caps_6.2.0.x86_64.xml
This file was added after the original commit that we
are reverting, so had to be manually edited to remove
the two capabilities.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 618e8665db.
This is the first in a series of 10 commits that revert (in reverse
order) the changes to add the <acpi-hotplug-bridge state='on|off'/>
switch to libvirt domain XML, which unfortunately needs to be removed
due to QEMU developers discovering a flaw with the design of the QEMU
commandline switch used to implement the libvirt switch that will
likely result in a new and different method of selecting hotplug
modes. Because the libvirt switch has not been in any official
releases of libvirt, we are still able to remove it completely, rather
than deprecating it.
The original commits began with commit
58ba0f6a3d. The other original commit
IDs are documented in each revert commit.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
rbd encryption is new in qemu 6.1.0.
This commit adds capability probing for it.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These were generated using a QEMU binary built from commit
v6.1.0-1552-g362534a643
Notably, this causes the arguments of -device to be generated
in JSON format.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU-6.2 started accepting a JSON object as argument for
'-device' which will also become the only syntax considered stable by
qemu in the future.
Since libvirt was recently converted to generate the properties via JSON
to begin wit we can start using it on the commandline as well, by simply
enabling the QEMU_CAPS_DEVICE_JSON capability, which we do by probing
for the 'json-cli' feature flag of 'device_add'.
Normally a change which changes a commandline output should be happening
only after the impacted real-caps test files are forked in the version
preceding the change, but in this case it's not necessary as the logic
for generating the device properties stays identical and we just change
the output format (avoid conversion). Additionally we still have a lot
of tests validating the conversion to the old commandline options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1510-gc148a05721 which most notably adds the 'json-cli'
feature for 'device_add' QMP command meaning that -device accepts JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
In this commit, add capability flag for query-dirty-rate first.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The data is based on commit v6.1.0-1313-gc09124dcb8
Notable changes:
- New machine types for the 6.2 cycle were added
- MEM_UNPLUG_ERROR event was deprecated and replaced by
DEVICE_UNPLUG_GUEST_ERROR
- Intel SGX related commands and devices added
- 'copy-before-write' blockdev filter was added
- 'memory-backend-epc' was added
- new cpu flags
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 58ba0f6a3d added a capability which
is supported by all qemu versions we support. Remove it and the
associated dead code. Since the capability isn't present in any upstream
release we can delete it completely.
Specifically the commit itself states that it was introduced "around
(qemu) 2.1". The rest of the code handles properly that the feature is
used only on x86 with the i440fx machine so the capability is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added support for i440fx specific global boolean flag
PIIX4_PM.acpi-pci-hotplug-with-bridge-support
around version 2.1. This flag is enabled by default. When disabled, it
turns off acpi pci hotplug for cold plugged pci bridges in i440fx
machine types.
Very recently, in qemu version 6.1, the same global option was also
added for q35 machine types as well.
ICH9-LPC.acpi-pci-hotplug-with-bridge-support
This option turns on or off acpi based hotplug for cold plugged pcie
bridges like pcie root ports. This flag is also enabled by
default. Please refer to the following qemu changes:
c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
This patch adds the corresponding qemu capabilities in libvirt. For
i440fx, the capability is detected as
QEMU_CAPS_PIIX_ACPI_HOTPLUG_BRIDGE. For q35, the capability is
detected as QEMU_CAPS_ICH9_ACPI_HOTPLUG_BRIDGE.
Please note that the test specific qemu capabilities .replies files
has already been updated as a part of regular refreshing them when a
new qemu version is released. Hence, no updates to those files are
required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
The capability name piix4-acpi-root-hotplug-en is not conventional and
appreared to be confusing to some. "en" suffix is also incorrect as the
capability in qemu is used to both enable and disable hotplug on the pci root
bus on the i440fx. Hence, rename it to piix4.acpi-root-pci-hotplug so that it
is clearer, less confusing and more accurate.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
The following change in qemu added support for a global boolean flag specific
to i440fx machines that would turn off or on acpi based hotplug for pci root
bus:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The option is passed as "-global PIIX4_PM.acpi-root-pci-hotplug=on" etc in qemu
commandline. It is enabled by default. This patch adds the corresponding qemu
capabilities in libvirt as QEMU_CAPS_PIIX_ACPI_ROOT_PCI_HOTPLUG.
Please note that the test specific qemu capabilities .replies files has already
been updated as a part of regular refreshing them when a new qemu version is
released. Hence, no updates to those files are required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This capability tracks whether memory-backend-* supports .reserve
attribute which is going to be important for backends associated
with virtio-mem devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit introduces a new capability that reflects virtio-mem-pci
device support in QEMU:
QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI, /* -device virtio-mem-pci */
The virtio-mem-pci device was introduced in QEMU 5.1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that it's no longer used, remove probing for it
and mark it as deprecated.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code assumes that all supported qemu versions have this capability
so we can retire it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added to 'query-command-line-options' in qemu commit 5559716c98
("util/qemu-config: Add loadparm to qemu machine_opts") released in
qemu-v2.10.0 but makes sense for s390 only. Treat it the same as the
keywrap capabilities in previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu introduced these options in 2eb1cd0768 ("s390x: CPACF: Handle key
wrap machine options") released in qemu-v2.3.0 but was exposed in
query-command-line-options only in 5bcfa0c543 ("util/qemu-config: fix
missing machine command line options").
The problem is that they are exposed even for architectures which don't
actually in fact support those.
Make the two capabilities a bit more useful by assuming them only on
s390 and thus removing them from other arches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To support virtio-blk queue-size option, this commit adds capability
detection to the option.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we no longer use '-device sga' we can stop probing for this device
in our capabilities code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'set-action' QMP command allows modifying the behaviour when the
guest resets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They are no longer used as we now assume that all tuning caps are
present and in case some will be removed we'll need to use different
probing methods.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base it on the presence of the "blockdev-reopen" QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Update to v6.1.0-rc0-48-g7b7ca8ebde
Notable changes are:
- stabilization of 'blockdev-reopen'
- addition of the 'vmx-tsc-scaling' cpu flag
- Supported display types are now in the schema only if they are compiled in.
- rbd image encryption
- 'aio-max-batch' iothread property
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Update the caps data for the upcoming qemu version.
Notable changes are:
- 'query-sev-attestation-report' command added
- 'sample-pages' members for dirty rate calculation added
- 'qtest' device added
- 'share' member added to query-memdev and 'reserve' members added to
query-memdev/memory-backend-[file,memfd,ram]
- 'qemu-vdagent' chardev added
- 'mptcp' toggle added to inet servers
- 'zstd' compression for qcow2
- new cpu models: - "Snowridge-v3"
- "Skylake-Server-v5"
- "Skylake-Client-v4"
- "Icelake-Server-v5"
- "Icelake-Client-v3"
- "Dhyana-v2"
- "Denverton-v3"
- "Cooperlake-v2"
- "Cascadelake-Server-v5"
- 'avx-vnni' added to some existing cpu models
- 'model-id' is now being reported as the host cpu again rather than
QEMU TCG as I've noted in previous bump
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
egl-headless graphics can be compiled out in qemu so we need to be able
to know whether the given qemu version support it.
Base the capability on the presence of the 'egl-headless' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
SDL graphics can be compiled out in qemu so we need to be able to know
whether the given qemu version support it.
Base the capability on the presence of the 'sdl' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The command allows to query various display-related options. The absence
of the command will be used to imply certain video-related capabilities
before we would be able to detect them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The devices no longer exist in qemu since the 2.6 release. Drop the
probing of the device properties and fix the data for
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we only have AMD SEV bits in qemu-2.12.0 replies which is way
too old to test new features that require AMD SEV as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virQEMUCapsProbeQMPMachineProps currently skips any not supported
machine type which includes `none` as well.
In order to start probing that machine type we need to add an exception
to not skip it when probing QEMU capabilities.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This flag will be used for the device virtio-gpu-gl-pci which is introduced
since QEMU 6.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce replies and xml files for QEMU 6.0.0 on s390x.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add test data based on qemu commit v6.0.0-540-g6005ee07c3.
Notable changes are the removal of 'sheepdog' disk storage protocol.
Additionally the cpu model reported when probing seems to have changed
from:
"model-id": "AMD Ryzen 9 3900X 12-Core Processor "
to:
"model-id": "QEMU TCG CPU version 2.5+"
despite building on the same machine. This probably also results in the
2 test changes in the CPU definition which popped up in this update.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Update to the final state now that qemu 6.0 was released.
Notable changes are the addition of 'EPYC-Rome-v2' cpu type and removal
of 'query-netdev' which we didn't use.
The rest is the usual churn caused by random registration of objects at
compile time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
In addition the capability wasn't even used to gate any functionality
except for reporting the presence in the domain capabilities XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported QEMU versions and there isn't a
more elegant way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemus have it, there isn't an elegant way to detect it and
it's unlikely to be ever removed on purpose.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
'query-commandline-options' never returned 'vmport' but we can detect it
in the list of supported object types. This removes it from all non-x86
originating test data as it's platform specific.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported QEMU versions now support query-qmp-schema. In the future
it will be possible to use the output of query-qmp-schema to also detect
commands reliably.
Since we are at the point where we have the least amount of .replies
files needing changing for a long time, move the 'query-qmp-schema' bits
before 'query-commands' to prepare for the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions have 'query-qmp-schema' so we can remove the
check whether it exists and all logic conntected to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move it under AARCH 64, since it's a platform specific feature, thus it
will be removed from all other platforms.
Since virQEMUCapsInitQMPBasicArch is used in qemuxml2argv test to
initiate qemuCaps for tests with fake capabilities, all the tests gain
GIC support now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit 66c5674e79 added a query for the device properties of 'usb-host'
but the command header isn't formated the same way as if it were
autogenerated. Reformat all the files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This property is exposed by QEMU on any PCI device, but we have to pick
some specific device(s) to probe it against. We expect that at least one
of the virtio devices will be present, so probe against them.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'block_passwd' command was removed 'display-reload' command was added
and the 'acpi-index' property for PCI devices was added.
There are no noticable changes for us.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The capability is asserted if qemu supports the -compat
deprecated-input= and deprecated-output= settings to control what should
happen if deprecated fields are used in QMP.
This will be used for a developer/tester-oriented setting which will
aid us in catching use of deprecated settings sooner.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Base the detection on the presence of the 'secret' qom-type entry, which
isn't conditionally compiled in qemu.
All caps-based test now switch to using JSON for -object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu qapified object-add, which means that it's introspectable via
query-qmp-schema. Update the qemu-6.0 capabilities to commit
v5.2.0-3205-g92566947b3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming commit will enable full backup support (incremental part
requires blockdev-reopen, which won't happen in qemu for at least
another release).
Add a capability that the 'blockdev-backup' job is supported by qemu
capped, but limited to when qemu supports QEMU_CAPS_BLOCKDEV.
We can also use it in the expression to enable
QEMU_CAPS_INCREMENTAL_BACKUP since it's a pre-requisite too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The -audiodev arg is a new way to configure audio devices in QEMU to
replace the QEMU_AUDIO_DRV env variable. This arg is not visible in
the "query-command-line-options" output since it is entirely QAPI
driven, not QemuOpts. It also isn't in "query-qmp-schema" though
since there's no QMP command that uses the Audiodev type yet.
So probe for the existance of this feature by looking for the
-vnc "audiodev" property. This won't let us determine which
precise audio backends QEMU has been built with, but for now
that's no worse than with env variables today.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The capability represents qemu's ability to setup mappings for migrating
block dirty bitmaps and is based on presence of the 'transform' property
of the 'block-bitmap-mapping' property of 'migrate-set-parameters' QMP
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>