Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.
It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are various methods named "virXXXXSecurityContext",
which are specific to SELinux. Rename them all to
"virXXXXSELinuxContext". They will still raise errors at
runtime if SELinux is not compiled in
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code adaptation is not done right now, but in subsequent patches.
Hence I am not implementing syntax-check rule as it would break
compilation. Developers are strongly advised to use these new macros.
They are similar to VIR_ALLOC() logic: VIR_STRDUP(dst, src) returns zero
on success, -1 otherwise. In case you don't want to report OOM error,
use the _QUIET variant of a macro.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
This will be used on a tap file descriptor returned by the bridge helper
to populate the <target> element, because the helper does not provide
the interface name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds two sets of functions:
1) lower level virProcessSet*() functions that will immediately set
the RLIMIT_MEMLOCK. RLIMIT_NPROC, or RLIMIT_NOFILE of either the
current process (using setrlimit()) or any other process (using
prlimit()). "current process" is indicated by passing a 0 for pid.
2) functions for virCommand* that will setup a virCommand object to
set those limits at a later time just after it has forked a new
process, but before it execs the new program.
configure.ac has prlimit and setrlimit added to the list of functions
to check for, and the low level functions log an "unsupported" error)
on platforms that don't support those functions.
This can be set when the virPCIDevice is created and placed on a list,
then used later when traversing the list to determine which stub
driver to bind/unbind for managed devices.
The existing Detach and Attach functions' signatures haven't been
changed (they still accept a stub driver name in the arg list), but if
the arg list has NULL for stub driver and one is available in the
device's object, that will be used. (we may later deprecate and remove
the arg from those functions).
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.
Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.
Assume format type is 'auto' when none is specified on
qemu command line.
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactoring done in 19c6ad9ac7 didn't
correctly take into account the order cgroup limit modification needs to
be done in. This resulted into errors when decreasing the limits.
The operations need to take place in this order:
decrease hard limit
change swap hard limit
or
change swap hard limit
increase hard limit
This patch also fixes the check if the hard_limit is less than
swap_hard_limit to print better error messages. For this purpose I
introduced a helper function virCompareLimitUlong to compare limit
values where value of 0 is equal to unlimited. Additionally the check is
now applied also when the user does not provide all of the tunables
through the API and in that case the currently set values are used.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=950478
Create the utility function virSocketAddrGetIpPrefix() to
determine the prefix for this network. The code in this
function was adapted from virNetworkIpDefPrefix().
Update virNetworkIpDefPrefix() in src/conf/network_conf.c
to use the new utility function.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Until now tranisent networks weren't really useful as libvirtd wasn't
able to remember them across restarts. This patch adds support for
loading status files of transient networks (that already were generated)
so that the status isn't lost.
This patch chops up virNetworkObjUpdateParseFile and turns it into
virNetworkLoadState and a few friends that will help us to load status
XMLs and refactors the functions that are loading the configs to use
them.
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Parse the domain XML with TPM passthrough support.
The TPM passthrough XML may look like this:
<tpm model='tpm-tis'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
The helper function to look up disk controller model may be used by scsi
hostdev. But it should be changed to use device info.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
The virCgroupMounted method is badly named, since a controller can be
mounted, but disabled in the current object. Rename the method to be
virCgroupHasController. Also make it tolerant to a NULL virCgroupPtr
and out-of-range controller index, to avoid duplication of these
checks in all callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This finds the parent for vHBA by iterating over all the HBA
which supports vport_ops capability on the host, and return
the first one which is online, not saturated (vports in use
is less than max_vports).
The helper iterates over sysfs, to find out the matched scsi host
name by comparing the wwnn,wwpn pair. It will be used by checkPool
and refreshPool of storage scsi backend. New helper getAdapterName
is introduced in storage_backend_scsi.c, which uses the new util
helper virGetFCHostNameByWWN to get the fc_host adapter name.
This introduces 4 new attributes for storage pool source adapter.
E.g.
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.
* docs/formatstorage.html.in:
- Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
- Add RNG schema
* src/conf/storage_conf.c:
- Parse and format the new XMLs
* src/conf/storage_conf.h:
- New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
- New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
- Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
- Replace "adapter" with "adapter.data.name", which is member of the union
of the new struct virStoragePoolSourceAdapter now. Later patch will
add the checking, as "adapter.data.name" is only valid for "scsi_host"
adapter.
* src/storage/storage_backend_scsi.c:
- Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
- New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
- Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
- New test
* tests/storagepoolxml2xmltest.c:
- Include the test
The virCgroupGetAppRoot is not clear in its meaning. Change
to virCgroupForSelf to highlight that this returns the
cgroup config for the caller's process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.
Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.
This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
One of my previous patches manipulated virSecurityLabel* APIs,
some were added to header files, and some were renamed. However,
these changes were not reflected in libvirt_private.syms.
The virDomainDefGetSecurityLabelDef was modifying the domain XML.
It tried to find a seclabel corresponding to given sec driver. If the
label wasn't found, the function created one which is wrong. In fact
it's security manager which should modify this part of domain XML.
This abstracts nodeDeviceVportCreateDelete as an util function
virManageVport, which can be further used by later storage patches
(to support persistent vHBA, I don't want to create the vHBA
using the public API, which is not good).
This adds two util functions (virIsCapableFCHost and virIsCapableVport),
and rename helper check_fc_host_linux as detect_scsi_host_caps,
check_capable_vport_linux is removed, as it's abstracted to the util
function virIsCapableVport. detect_scsi_host_caps nows detect both
the fc_host and vport_ops capabilities. "stat(2)" is replaced with
"access(2)" for saving.
* src/util/virutil.h:
- Declare virIsCapableFCHost and virIsCapableVport
* src/util/virutil.c:
- Implement virIsCapableFCHost and virIsCapableVport
* src/node_device/node_device_linux_sysfs.c:
- Remove check_capable_vport_linux
- Rename check_fc_host_linux as detect_scsi_host_caps, and refactor
it a bit to detect both fc_host and vport_os capabilities
* src/node_device/node_device_driver.h:
- Change/remove the related declarations
* src/node_device/node_device_udev.c: (Use detect_scsi_host_caps)
* src/node_device/node_device_hal.c: (Likewise)
* src/node_device/node_device_driver.c (Likewise)
"open_wwn_file" in node_device_linux_sysfs.c is redundant, on one
hand it duplicates work of virFileReadAll, on the other hand, it's
waste to use a function for it, as there is no other users of it.
So I don't see why the file opening work cannot be done in
"read_wwn_linux".
"read_wwn_linux" can be abstracted as an util function. As what all
it does is to read the sysfs entry.
So this patch removes "open_wwn_file", and abstract "read_wwn_linux"
as an util function "virReadFCHost" (a more general name, because
after changes, it can read each of the fc_host entry now).
* src/util/virutil.h: (Declare virReadFCHost)
* src/util/virutil.c: (Implement virReadFCHost)
* src/node_device/node_device_linux_sysfs.c: (Remove open_wwn_file,
and read_wwn_linux)
src/node_device/node_device_driver.h: (Remove the declaration of
read_wwn_linux, and the related macros)
src/libvirt_private.syms: (Export virReadFCHost)
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
qemuGetNumadAdvice will be used by LXC driver, rename
it to virNumaGetAutoPlacementAdvice and move it to virnuma.c
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Add APIs which allow creation of a virIdentity from the info
associated with a virNetServerClientPtr instance. This is done
based on the results of client authentication processes like
TLS, x509, SASL, SO_PEERCRED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A socket object has various pieces of security data associated
with it, such as the SELinux context, the SASL username and
the x509 distinguished name. Add new APIs to virNetServerClient
and related modules to access this data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add necessary handling code for the new s390 CCW address type to
virDomainDeviceInfo. Further, introduce memory management, XML
parsing, output formatting and range validation for the new
virDomainDeviceCCWAddress type.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
A number of symbols are only present when GNUTLS is enabled.
Thus we must use a separate libvirt_gnutls.syms file for them
instead of libvirt_private.syms
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
Currently the server determines whether authentication of clients
is complete, by checking whether an identity is set. This patch
removes that lame hack and replaces it with an explicit method
for changing the client auth code
* daemon/remote.c: Update for new APis
* src/libvirt_private.syms, src/rpc/virnetserverclient.c,
src/rpc/virnetserverclient.h: Remove virNetServerClientGetIdentity
and virNetServerClientSetIdentity, adding a new method
virNetServerClientSetAuth.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virThreadCancel function. This functional is inherently
dangerous and not something we want to use in general, but
integration with SELinux requires that we provide this stub.
We leave out any Win32 impl to discourage further use and
because obviously SELinux isn't enabled on Win32
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
