Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght calculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght canculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
I've moved all the printing from cmdDomblkinfoPrint() to cmdDomblkinfo(),
and renamed the cmdDomblkinfoPrint() to cmdDomblkinfoGet(), since nature of
that function changed from gathering and printing informations only to
gathering information. This I believe simplifies the functions and
makes the implementation of vshTable API simpler.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
In a following case:
virsh start $domain
service libvirtd stop
<shutdown> the guest from within the $domain
service libvirtd start
Notice that PCI devices which have been assigned to the $domain will
still be bound to stub drivers instead rebound to host drivers.
In that case the call stack is like below:
libvirtd start
qemuProcessReconnect
qemuProcessStop (because $domain was shutdown without
libvirtd event to process that)
qemuHostdevReAttachDomainDevices
qemuHostdevReAttachPCIDevices
virHostdevReAttachPCIDevices
However, because qemuHostdevUpdateActiveDomainDevices was called
after the qemuConnectMonitor, the setup of the tracking of each
host device in the $domain on either the activePCIHostdevs list
or inactivePCIHostdev list will not occur in an orderly manner.
Therefore, virHostdevReAttachPCIDevices just neglects these host PCI
devices which are bound to stub drivers and doesn't rebind them to
host drivers.
This patch fixs that by moving qemuHostdevUpdateActiveDomainDevices before
qemuConnectMonitor during libvirtd reconnection processing.
Signed-off-by: Wu Zongyong <cordius.wu@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the new qemuDomainRemoveInactiveJobLocked to remove the
@obj during the virDomainObjListForEach call which holds a
lock on the domain object list.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainRemoveInactiveJobLocked which copies
qemuDomainRemoveInactiveJob except of course calling
another new helper qemuDomainRemoveInactiveLocked.
The qemuDomainRemoveInactiveLocked is a copy of
qemuDomainRemoveInactive except that instead of calling
virDomainObjListRemove it calls virDomainObjListRemoveLocked.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce qemuDomainRemoveInactiveJobCommon to handle what will
be the common parts of the code with a new function that will
be used to call virDomainObjListRemoveLocked instead of the
unlocked variant.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
A bunch of SCSI test cases in qemuxml2argv used
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
...);
instead of the intended
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
...);
which is used correctly in qemuxml2xml. Fix them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We already prefer them in capabilities, and domcapabilities
should be consistent with that.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The new implementation contains less duplicated code and
is easier to extend.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we have reduced the number of sensible options down
to either the native QEMU binary or RHEL's qemu-kvm, we can
make virQEMUCapsInitGuest() a bit simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Both Fedora's qemu-kvm and Debian's/Ubuntu's kvm are nothing
more than paper-thin wrappers around the native QEMU binary,
so we gain nothing by looking for them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When the guest is native, we are currently looking at
potential KVM binaries regardless of whether or not we have
already located a QEMU binary suitable to run the guest.
This made sense back when KVM support was not part of QEMU
proper, but these days the KVM binaries are in most cases
just trivial wrapper scripts around the native QEMU binary
so it doesn't make sense to poke at them unless they're
the only binaries on the system, such as when running on
RHEL.
This will allow us to simplify both virQEMUCapsInitGuest()
and virQEMUCapsInitGuestFromBinary().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When running an armv7l guest on an aarch64 hosts, the
qemu-system-aarch64 binary should be our first choice instead
of qemu-system-arm since the former can take advantage of KVM
acceleration.
Move the special case to virQEMUCapsFindBinaryForArch() so
that it's handled along with all other cases rather than on
its own later on.
Doing so will also make further refactoring easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.
The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
</domain>
with the second <emulator> element providing no additional
information.
Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The function performing the checks, rather than its callers,
should contain comments explaining the rationale behind said
checks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1630164
The domiflist command is designed to show a brief information on
domain interfaces. One piece of information that is shows is
"Source" - source network, device, name, bridge. However, it's
ignoring vhostuser for which we can show the unix socket it's
associated with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1630164
Since 2a13a0a103 we are querying the vhostuser's interface name
when building qemu command line. However, we forgot to do so on
hotplug.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The `if(!list || list->type != VIR_CONF_LIST)` check couldn't be
written in a 100% similar way. Instead, we're just checking whether
`virConfGetValueStringList() <= 0` and creating a new function to:
- return -1 in case virConfGetValueStringList fails either due to some
allocation failure or when traversing the list;
- resetting the last error and return 0 otherwise;
Taking this approach we can have the behaviour with the new code as
close as possible to the old one.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This change actually changes the behaviour of xenConfigGetString() as
now it returns a newly-allocated string.
Unfortunately, there's not much that can be done in order to avoid that
and all the callers have to be changed in order to avoid leaking the
return value.
Also, as a side-effect of the change above, the function now takes a
"char **" argument instead of a "const char **" one.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move memory bandwidth capability nodes into one data structure,
this allows us to add a monitor for memory bandwidth.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move all cache banks into one data structure, this allows
us to add other cache component, such as cache monitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch introduces the resource monitor and creates the interface
for getting host capability of resource monitor from the system resource
control file system.
The resource monitor takes the role of RDT monitoring group and could be
used to monitor the resource consumption information, such as the last
level cache occupancy and the utilization of memory bandwidth.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
