Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.
We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d821d
and 65686e5a81 this was removed.
The vCPU threads make sense in the counterparts that set the vCPU
bandwidth/quota, not in the emulator one. The emulator tunables are set
all the time anyways.
Drop the extra check and remove the now unneeded vm argument.
Since commit 0c04906fa the check for priv->cgroup doesn't make sense as
the calls to virCgroupHasController return the same information. Remove
it and move it's comment partially to the new check.
The already spurious check was also later copied to the iothreads code.
Once more stuff will be moved into the vCPU data structure it will be
necessary to get a specific one in some ocasions. Add a helper that will
simplify this task.
Refactor the code flow so that 'exit_monitor:' can be removed.
This patch moves the auditing functions into places where it's certain
that hotunplug was or was not successful and reports errors from
qemuMonitorGetCPUInfo properly.
Refactor the code flow so that 'exit_monitor:' can be removed.
This patch also moves the auditing and setting of the new vCPU count
right to the place where the hotplug happens, since it's possible that
the hotplug succeeds and adds a cpu while other stuff fails.
Lastly, failures of qemuMonitorGetCPUInfo are now reported rather than
ignored. The function retuns 0 if it "successfully" detected 0 threads.
qemuDomainHotplugVcpus/qemuDomainHotunplugVcpus are complex enough in
regards of adding one CPU. Additionally it will be desired to reuse
those functions later with specific vCPU hotplug.
Move the loops for adding vCPUs into qemuDomainSetVcpusFlags so that the
helpers can be made simpler and more straightforward.
The cpu hotplug helper functions used negative error handling in a part
of them, although some code that was added later didn't properly set the
error codes in some cases. This would cause improper error messages in
cases where we couldn't modify the numa cpu mask and a few other cases.
Fix the logic by converting it to the regularly used pattern.
With a very unfortunate timing, the agent might vanish before we do the
second call while the locks were down. Re-check that the agent is
available before attempting it again.
We should make a copy of current definition to preserve a persistent
definition, because we later update the definition with live changes.
The live definition is discarded on domain shutdown and replaced by the
copy we make before starting the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit d2e5538b16.
A migration regression was introduced by this commit. When migrating
a domain, its active XML is sent to the destination libvirtd, where
it is parsed as inactive XML. d2e5538b copied the libxl generated
interface name into the active config, which was being passed to the
migration destination and being parsed into inactive config. Attempting
to start the config could result in failure if an interface with the
same generated name already exists.
The qemu driver behaves similarly, but the parser contains a hack to
skip interface names starting with 'vnet' when parsing inactive XML.
We could extend the hack to skip names starting with 'vif' too, but a
better fix would be to expose these hypervisor-specific interface name
prefixes in capabilities. See the following discussion thread for more
details
https://www.redhat.com/archives/libvir-list/2015-December/msg00262.html
For the pending 1.3.0 release, it is best to revert d2e5538b. It can
be added again post release, after moving the prefix to capabilities.
When installing the libvirt-daemon RPM, we have a %post rule to
enable the libvirtd.service, virtlockd.socket and virtlogd.socket
files. This is only done, however, when the RPM is first installed,
not when upgrading RPMs. So virtlogd will not get activated on
upgrading, which is a problem as libvirt qemu driver will expect
it to be available by default.
This adds a trigger that is run when uninstalling libvirt-daemon
older than 1.3.0 that will enable & start virtlogd.socket if
libvirtd is enabled and/or started. Using the trigger rather
than %post ensures that it only runs once, allowing admins to
disable it explicitly thereafter without future upgrades
re-enabling it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When someone does 'systemctl enable libvirtd.service' we should
also enable virtlockd.socket/virtlogd.socket, so that they can
be auto-activated if libvirtd tries to access the sockets.
Without this, people have to manually enable the units themselves
via 'systemctl enable virtdlogd.socket'.
This also ensures that if distros uses 'systemctl preset' for
enabling 'libvirtd.service', then the virtdlogd.socket gets
enabled without having to wait for the distro to update their
presets file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlogd RPC messages all have a flags parameter. For
sake of future error reporting we should be verifying
these are all 0 for now.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current virtlogd RPC protocol provides the ability to
handle log files associated with QEMU stdout/err. The log
protocol messages take the virt driver, domain name and
use that to form a log file path. This is quite restrictive
as it prevents us re-using the same RPC protocol messages
for logging to char device backends where the filename
can be arbitrarily user specified. It is also bad because
it means we have 2 separate locations which have to decide
on logfile name.
This change alters the RPC protocol so that we pass the
desired log file path along when opening the log file
initially. Now the virt driver is exclusively in charge
of deciding the log filename
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt driver, dom name and uuid associated with a log
file are important pieces of metadata to keep around for
sake of future enhancements to virtlogd. Currently we
discard them after opening the log file, but we should
preserve them, even across restarts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainSetMemory is documented to change only runtime configuration of
running domain. However, that's not true of all hypervisors supported.
Seems as though when commit id '0f2e50be5' added the current flag, the
function description should have been updated similar to when commit id
'c1795c52' updated the virDomainSetMaxMemory description. Especially since
commit id '80427f1d' updated the virsh 'setmem' description to indicate
"behavior is different depending on hypervisor."
This patch will update the description to match current functionality.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
When a SCSI disk is hotplugged to a domain that does not have the required
SCSI controller already defined and loaded the following internal error occurs
error: Failed to attach device from scsi_disk.xml
error: internal error: Could not find scsi controller with index 0 required for device
Commit 0260506c added in method qemuBuildDriveDevStr a lookup of the controller
alias. The internal error occurs because in method qemuDomainAttachSCSIDisk
the automatic creation of the potentially missing SCSI controller occurs after
calling qemuBuildDriveDevStr.
This patch reverses the calling sequence.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Often when debugging bug reports one is given a copy of the file
from /var/log/libvirt/qemu/$NAME.log along with other supporting
files. In a number of cases I've been given sets of files which
were from different machines. Including the hostname in the QEMU
log file will help identify when the bug reporter is providing
bad information.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log file descriptor associated with the virRotatingFile
struct should be marked close-on-exec, as even when virtlogd
re-exec's itself it expect to open the log file fresh. It
does not need to preserve the logfile handles, only the network
client FDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
