The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
Fix format of the secret XML in the example. The XML had an extraneous
"type='iscsi'" (which is used by the <disk> definitions)
The world wide node name had a typo in the acronym (wwwn).
The apibuild.py script did not handle whitespace in preprocessor
macros, so it failed to detect constants declared with '# define'
instead of '#define'. Since we now correctly indent our public
header files, we have silently lost all constants from
libvirt-api.xml. This also caused us to not detect formatting
errors in constant docs
This changes the display from:
libvirt-storage: APIs for management of storages
to
libvirt-storage: APIs for management of storage pools and volumes
In making that change I expected my build tree html output to be
regenerated; however, it wasn't because the dependency for the separated
libvirt-storage.h wasn't there. It was only present for libvirt.h.in
So I added each in the order displayed on the docs/html/index.html page
Make was not able to realize the dependencies for html/*.html files when
running 'make -j9 dist'. All the files are generated together with
html/index.html, so simply separating them into another variable and
adding one block into the dependency chain solves the issue.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since libvirt.h was split into multiple files and similarly
docs/libvirt-libvirt.html, docs/hvsupport.html have bad hyperlinks. The
same happens for all the html.in files that used <code class='docref'>
tag, because page.xsl has no idea where to point the link that's found.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
The virStoragePoolSourceFindDuplicate only checks the incoming definition
against the same type of pool as the def; however, for "scsi_host" and
"fc_host" adapter pools, it's possible that either some pool "scsi_host"
adapter definition is already using the scsi_hostN that the "fc_host"
adapter definition wants to use or some "fc_host" pool adapter definition
is using a vHBA scsi_hostN or parent scsi_hostN that an incoming "scsi_host"
definition is trying to use.
This patch adds the mismatched type checks and adds extraneous comments
to describe what each check is determining.
This patch also modifies the documentation to be describe what scsi_hostN
devices a "scsi_host" source adapter should use and which to avoid. It also
updates the parent definition to specifically call out that for mixed
environments it's better to define which parent to use so that the duplicate
pool checks can be done properly.
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.
This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.
The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.
This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
The docs describing the <host> element that are under the <source>
element in the XML document were incorrectly placed under the <disk>
element. Move them to the correct place.
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.
This will be later populated with the guest state of the channel.
Since 1.2.8 it's possible to use OVMF on domains. Moreover, it's
possible to have libvirt create NVRAM file per domain. Later,
when domain is undefined, the file is removed too. However,
things are a bit complicated when domain's transient. There's no
undefine to transient domains. There are two options: 1) leave
the file behind and let mgmt app remove it. 2) remove it
automatically as domain dies.
But, in some scenarios mgmt app may want to preserve the file,
copy it somewhere safe, and then copy it back when the domain is
starting again. And this wouldn't be possible with case 2). So,
even though case 1) leaves some files behind (possibly undeleted
for a long time), the files themselves are small (128K each). And
data loss is worse than full disk, isn't it?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After recent discussion it looks like curly brackets around one-line
bodies are preferred if the preceding condition is, itself, multiline.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rather than just picking the first CD (or failing that, HDD) we come
across, if the user has picked a boot device ordering with <boot
order=''>, respect that (and just try to boot the lowest-index device).
Adds two sets of tests to bhyve2xmlargv; 'grub-bootorder' shows that we
pick a user-specified device over the first device in the domain;
'grub-bootorder2' shows that we pick the first (lowest index) device.
The API docs generators were broken by the header file
re-organization. Specifically
* html/libvirt-libvirt.html was empty (and should be deleted)
* Makefile.am didn't install html/libvirt-libvirt-*.html
* hvsupport.html was mostly empty
* sitemap.html.in didn't list the new html/*.html files
https://bugzilla.redhat.com/show_bug.cgi?id=1160926
Introduce a 'managed' attribute to allow libvirt to decide whether to
delete a vHBA vport created via external means such as nodedev-create.
The code currently decides whether to delete the vHBA based solely on
whether the parent was provided at creation time. However, that may not
be the desired action, so rather than delete and force someone to create
another vHBA via an additional nodedev-create allow the configuration of
the storage pool to decide the desired action.
During createVport when libvirt does the VPORT_CREATE, set the managed
value to YES if not already set to indicate to the deleteVport code that
it should delete the vHBA when the pool is destroyed.
If libvirtd is restarted all the memory only state was lost, so for a
persistent storage pool, use the virStoragePoolSaveConfig in order to
write out the managed value.
Because we're now saving the current configuration, we need to be sure
to not save the parent in the output XML if it was undefined at start.
Saving the name would cause future starts to always use the same parent
which is not the expected result when not providing a parent. By not
providing a parent, libvirt is expected to find the best available
vHBA port for each subsequent (re)start.
At deleteVport, use the new managed value to decide whether to execute
the VPORT_DELETE. Since we no longer save the parent in memory or in
XML when provided, if it was not provided, then we have to look it up.
https://bugzilla.redhat.com/show_bug.cgi?id=1160565
The existing code assumed that the configuration of a 'parent' attribute
was correct for the createVport path. As it turns out, that may not be
the case which leads errors during the deleteVport path because the
wwnn/wwpn isn't associated with the parent.
With this change the following is reported:
error: Failed to start pool fc_pool_host3
error: XML error: Parent attribute 'scsi_host4' does not match parent 'scsi_host3' determined for the 'scsi_host16' wwnn/wwpn lookup.
for XML as follows:
<pool type='scsi'>
<name>fc_pool</name>
<source>
<adapter type='fc_host' parent='scsi_host4' wwnn='5001a4aaf3ca174b' wwpn='5001a4a77192b864'/>
</source>
Where 'nodedev-dumpxml scsi_host16' provides:
<device>
<name>scsi_host16</name>
<path>/sys/devices/pci0000:00/0000:00:04.0/0000:10:00.0/host3/vport-3:0-11/host16</path>
<parent>scsi_host3</parent>
<capability type='scsi_host'>
<host>16</host>
<unique_id>13</unique_id>
<capability type='fc_host'>
<wwnn>5001a4aaf3ca174b</wwnn>
<wwpn>5001a4a77192b864</wwpn>
...
The patch also adjusts the description of the storage pool to describe the
restrictions.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We still default to bhyveloader(1) if no explicit bootloader
configuration is supplied in the domain.
If the /domain/bootloader looks like grub-bhyve and the user doesn't
supply /domain/bootloader_args, we make an intelligent guess and try
chainloading the first partition on the disk (or a CD if one exists,
under the assumption that for a VM a CD is likely an install source).
Caveat: Assumes the HDD boots from the msdos1 partition. I think this is
a pretty reasonable assumption for a VM. (DrvBhyve with Bhyveload
already assumes that the first disk should be booted.)
I've tested both HDD and CD boot and they seem to work.
Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
CPU numa topology implicitly allows memory specification in 'KiB'.
Enabling this to accept the 'unit' in which memory needs to be specified.
This now allows users to specify memory in units of choice, and
lists the same in 'KiB' -- just like other 'memory' elements in XML.
<numa>
<cell cpus='0-3' memory='1024' unit='MiB' />
<cell cpus='4-7' memory='1024' unit='MiB' />
</numa>
Also augment test cases to correctly model NUMA memory specification.
This adds the tag 'unit="KiB"' for memory attribute in NUMA cells.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As documented in https://bugzilla.redhat.com/show_bug.cgi?id=1161358,
the ACL attribute should be named: interface_macaddr
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add documentation to explain how compat-mode can be invoked with libvirt
running on PowerPC architecture.
It also mentions that this change is available libvirt 1.2.11 onwards.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extending the iothread disk support from pci to pci and ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Create a new libvirt-host.h file to hold the public
API definitions for the virConnect type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain.h file to hold the public
API definitions for the virDomain type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-event.h file to hold the public
API definitions for the virEvent type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-storage.h file to hold the public
API definitions for the virStorage/Vol type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-stream.h file to hold the public
API definitions for the virStream type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Note the definition of virStreamPtr is not moved, since that
must be declared early for all other libvirt APIs to be able
to reference it.
Create a new libvirt-secret.h file to hold the public
API definitions for the virSecret type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nodedev.h file to hold the public
API definitions for the virNodeDevice type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nwfilter.h file to hold the public
API definitions for the virNWFilter type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-interface.h file to hold the public
API definitions for the virInterface type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-network.h file to hold the public
API definitions for the virNetwork type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain-snapshot.h file to hold the public
API definitions for the virDomainSnapshot type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
