If PKG_CONFIG_LIBDIR is not set when doing mingw32/64 builds,
then pkg-config may silently fallback to native versions of
libraries, with predictably bad results. Setting PKG_CONFIG_LIBDIR
forces it to only consider the mingw32/64 libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Every source file is currently built twice by libtool, once for
the shared library and once for the static library. Static libs
are not commonly packaged by distros and slow down compilation
time by more than 50% compared to a shared-only build time.
Time for 'make -j 4':
shared only: 2 mins 9 secs
shared + static: 3 mins 26 secs
Time for non-parallel make
shared only: 3 mins 32 secs
shared + static: 5 mins 41 secs
Those few people who really want them, can pass --enable-static
to configure
Disabling them by default requires use of LT_INIT, but for
compat with RHEL5 we can't rely on that. So we conditionally
use LT_INIT, but fallback to AM_PROG_LIBTOOL if not present.
The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Given that we auto-detect whether each -Wxxxx flag is supported by
GCC, and we are warning-free and use automake silent rules, there
is no compelling reason to allow compile warnings to be disabled.
Replace the --enable-compile-warnings flag with a simpler
--enable-werror flag, which defaults to 'yes' if building
from GIT, or 'no' if building from tar.gz
This helps ensure that everyone writing patches for libvirt will
take care to fix their warning problems before submitting for
review
* autobuild.sh: Force -Werror
* configure.ac: Update for LIBVIRT_COMPILE_WARNINGS macro change
* m4/virt-compile-warnings.m4: Permanently enable all warnings,
auto-enable Werror for GIT builds
Some gcc warnings about no % in a printf format string only
appear under --disable-nls. And configure.ac should automatically
be excluding modules on mingw without us having to be explicit.
Improving autobuild.sh to stress more combinations can only help.
* autobuild.sh: Add --disable-nls on first build. Update mingw
build to rely more on configure.ac detection.
* libvirt.spec.in (%configure): Drop unused %{one} macro.
* mingw32-libvirt.spec.in (%{rhel}): Compile ESX but not HyperV on
mingw build for RHEL.
(%build): Make configure honor spec conditionals. Reorder to
match libvirt.spec.
* autobuild.sh (mingw): Update list to match.
Suggested by Daniel P. Berrange.
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
Last time I ran ./autobuild.sh was on F13; and upgrading to F14
exposed these leftovers due to a newer gcov than what was in the stale
files, in the form of spurious messages that break 'make check':
+profiling:/home/remote/eblake/libvirt-tmp/tools/virsh-console.gcda:Version mismatch - expected 405R got 404R
and concluding with a bug in the autobuild.sh script itself:
./autobuild.sh: line 44: test: =: unary operator expected
* autobuild.sh: avoid syntax error on failed test
* tools/Makefile.am (CLEANFILES): Clean coverage files.
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.
This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).
# stap examples/systemtap/client.stp
Client fd=44 connected readonly=0
Client fd=44 auth polkit deny pid:24997,uid:500
Client fd=44 disconnected
Client fd=46 connected readonly=1
Client fd=46 auth sasl allow test
Client fd=46 disconnected
The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.
* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API
Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled
* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
API for auditing messages
Without this patch and with a clean environment, ./autobuild.sh
tried to use ./configure --prefix=/, and fails.
* autobuild.sh (AUTOBUILD_INSTALL_ROOT): Provide sensible
default. Suggested by Daniel P. Berrange.
* autobuild.sh, mingw32-libvirt.spec.in: Enable esx on mingw32
* src/esx/esx_driver.c: Define AI_ADDRCONFIG if not set
* src/esx/esx_util.c, src/esx/esx_vi_types.c: Always use
%lld & friends, since gnulib guarentees we have these
and not the target's own variants
GCC >= 4.4 assumes the 'printf' attribute refers to the native
runtime libraries format specifiers. Thanks to gnulib, libvirt
has GNU format specifiers everywhere. This means we need to
use 'gnu_printf' with GCC >= 4.4 to get correct compiler
checking of printf format specifiers.
* HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF
* autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula
driver on mingw32 builds
* qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h,
src/logging.h, src/security.h, src/sexpr.h, src/util.h,
src/virterror_internal.h, src/xend_internal.c: Change
over to ATTRIBUTE_FMT_PRINTF.
* src/virsh.c: Disable 'cd' and 'pwd' commands on Win32
since they don't compile
* src/threads-win32.c: Add missing return value check
* .cvsignore, Makefile.am, autobuild.sh, configure.in,
mingw32-libvirt.spec.in: Import the latest MinGW libvirt spec
file. Note that the file has been renamed to conform to
new Fedora packaging guidelines.
* autobuild.sh: Fix a bug in the generation of the $EXTRA_RELEASE
field when autobuilding.
* autobuild.sh: Remove unnecessary quotes.
Don't choke on a file name argument containing a space.
Don't misbehave for $AUTOBUILD_INSTALL_ROOT containing
a shell meta-character.
