Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The attributes of a <network> element's <forward> element were
previously stored directly in the virNetworkDef object, but
virNetworkUpdateForward() needs to operate on a <forward> in
isolation, so this patchs pulls out all those attributes into a
separate virNetworkForwardDef struct (and shortens their names
appropriately). This new object is contained in the virNetworkDef, not
pointed to by it, so there is no extra memory management.
This patch makes no functional changes, it only changes, e.g.,
"nForwardIfs" to "forward.nifs".
The patch adds the backend driver to support iSCSI format storage pools
and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt
is as follows:
1. ESX static iSCSI target <------> Libvirt Storage Pools
2. ESX iSCSI LUNs <------> Libvirt Storage Volumes.
The above understanding is based on http://libvirt.org/storage.html.
The operation supported on iSCSI pools includes:
1. List storage pools & volumes.
2. Get XML descriptor operaion on pools & volumes.
3. Lookup operation on pools & volumes by name, UUID and path (if applicable).
iSCSI pools does not support operations such as: Create / remove pools
and volumes.
The patch refactors the current ESX storage driver due to following reasons:
1. Given most of the public APIs exposed by the storage driver in Libvirt
remains same, ESX storage driver should not implement logic specific
for only one supported format (current implementation only supports VMFS).
2. Decoupling interface from specific storage implementation gives us an
extensible design to hook implementation for other supported storage
formats.
This patch refactors the current driver to implement it as a facade pattern i.e.
the driver exposes all the public libvirt APIs, but uses backend drivers to get
the required task done. The backend drivers provide implementation specific to
the type of storage device.
File changes:
------------------
esx_storage_driver.c ----> esx_storage_driver.c (base storage driver)
|
|---> esx_storage_backend_vmfs.c (VMFS backend)
This will simplify the refactoring of the ESX storage driver to support
a VMFS and an iSCSI backend.
One of the tasks the storage driver needs to do is to decide which backend
driver needs to be invoked for a given request. This approach extends
virStoragePool and virStorageVol to store extra parameters:
1. privateData: stores pointer to respective backend storage driver.
2. privateDataFreeFunc: stores cleanup function pointer.
virGetStoragePool and virGetStorageVol are modfied to accept these extra
parameters as user params. virStoragePoolDispose and virStorageVolDispose
checks for cleanup operation if available.
The private data pointer allows the ESX storage driver to store a pointer
to the used backend with each storage pool and volume. This avoids the need
to detect the correct backend in each storage driver function call.
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.
Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.
Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.
N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
After the connection to ESX 5.1 being broken since g1e7cd39, the fix
in bab7752c helped a bit, but still missed a spot, so the connection
is now successful, but some APIs (for example defineXML) don't work.
Two cases missing are added in this patch to avoid that.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After separating 5.x and 5.1 versions of ESX, we forgot to add 5.1
into the list of allowed connections, so connections to 5.1 fail since
v1.0.0-rc1-5-g1e7cd39
Also remove warnings for upcoming versions. There hadn't been any
compatibility problems with new ESX version over the whole lifetime
of the ESX driver, so I don't expect any in the future.
Update documentation to mention vSphere 5.x support.
Traverse the whole inheritance hierarchy for dynamic dispatch as it is
already done for the dynamic cast.
Also make AnyType cast errors more verbose.
Reported by Ata Bohra.
libcurl uses a SIGALRM in combination with sigsetjmp/siglongjmp to be
able to abort a DNS lookup when it takes too long. The problem with this
in a multi-threaded application is that the signal handler for SIGALRM
and the call to siglongjmp can be executed on a thread that is different
from the one that initially did the SIGALRM setup and the call to
sigsetjmp. In the reported case this triggered a segfault.
Disable libcurl's use of signals to avoid this situation. This has the
disadvantage of losing the ability to abort synchronous DNS lookups which
might result in libcurl getting stuck in a DNS lookup in the worst case.
When libcurl was build with an asynchronous DNS backend such as c-ares
then there is no problem because the timeout mechanism works without
signals here anyway.
Reported by Benjamin Wang.
Avoid requesting information such as identity or power state when it
is not necessary.
Lookup virtual machine list with the required fields (configStatus,
name, and config.uuid) to make esxVI_GetVirtualMachineIdentity work.
No need to call esxVI_GetNumberOfSnapshotTrees. rootSnapshotTreeList
can be tested for emptiness by checking it for NULL.
esxVI_LookupRootSnapshotTreeList already does the error reporting,
don't overwrite it.
Check if autostart is enabled at all before looking up the individual
autostart setting of a virtual machine.
Reorder VIR_EXPAND_N(doms, ndoms, 1) to avoid leaking the result of
the call to virGetDomain if VIR_EXPAND_N fails.
Replace VIR_EXPAND_N by VIR_RESIZE_N to avoid quadratic scaling, as in
the Hyper-V version of the function.
If virGetDomain fails it already reports an error, don't overwrite it
with an OOM error.
All items in doms up to the count-th one are valid, no need to double
check before freeing them.
Finally, don't leak autoStartDefaults and powerInfoList.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
ESX doesn't use the common virDomainObj implementation so this patch
adds a separate implementation.
This driver supports all currently defined filtering flags, but as with
other drivers some combinations yield a empty result list.
This has several benefits:
1. Future snapshot-related code has a definite place to go (and I
_will_ be adding some)
2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error
classification, which has been underutilized (previously only in
libvirt.c)
* src/conf/domain_conf.h, domain_conf.c: Split...
* src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files.
* src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files.
* po/POTFILES.in: Mark new file for translation.
* src/vbox/vbox_tmpl.c: Update caller.
* src/esx/esx_driver.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_domain.h: Likewise.
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
An ESX server has one or more PhysicalNics that represent the actual
hardware NICs. Those can be listed via the interface driver.
A libvirt virtual network is mapped to a HostVirtualSwitch. On the
physical side a HostVirtualSwitch can be connected to PhysicalNics.
On the virtual side a HostVirtualSwitch has HostPortGroups that are
mapped to libvirt virtual network's portgroups. Typically there is
HostPortGroups named 'VM Network' that is used to connect virtual
machines to a HostVirtualSwitch. A second HostPortGroup typically
named 'Management Network' is used to connect the hypervisor itself
to the HostVirtualSwitch. This one is not mapped to a libvirt virtual
network's portgroup. There can be more HostPortGroups than those
typical two on a HostVirtualSwitch.
+---------------+-------------------+
...---| | | +-------------+
| HostPortGroup | |---| PhysicalNic |
| VM Network | | | vmnic0 |
...---| | | +-------------+
+---------------+ HostVirtualSwitch |
| vSwitch0 |
+---------------+ |
| HostPortGroup | |
...---| Management | |
| Network | |
+---------------+-------------------+
The virtual counterparts of the PhysicalNic is the HostVirtualNic for
the hypervisor and the VirtualEthernetCard for the virtual machines
that are grouped into HostPortGroups.
+---------------------+ +---------------+---...
| VirtualEthernetCard |---| |
+---------------------+ | HostPortGroup |
+---------------------+ | VM Network |
| VirtualEthernetCard |---| |
+---------------------+ +---------------+
|
+---------------+
+---------------------+ | HostPortGroup |
| HostVirtualNic |---| Management |
+---------------------+ | Network |
+---------------+---...
The currently implemented network driver can list, define and undefine
HostVirtualSwitches including HostPortGroups for virtual machines.
Existing HostVirtualSwitches cannot be edited yet. This will be added
in a followup patch.
esxVI_LookupHostSystemProperties guarantees that hostSystem is non-NULL.
Remove redundant NULL checks from callers.
Also prefer esxVI_GetStringValue over open-coding the logic.
The static deep copy allocates storage for the copy. The dynamic
version injected the dynamic dispatch after the allocation. This
triggered the invalid argument check in the dynamically dispatched
deep copy call. The deep copy function expects its dest parameter
to be a pointer to a NULL-pointer. This expectation wasn't met due
to the dispatching deep copy doing the allocation before the call.
Fix this by dynamically dispatching to the correct type before the
allocation.
Lists available PhysicalNic devices. A PhysicalNic is always active
and can neither be defined nor undefined.
A PhysicalNic is used to bridge a HostVirtualSwitch to the physical
network.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Fix addresses two issues:
1. Fix generator code to allow deep copy operation for objects with
Dynamic_Cast capabilities.
2. Add missing deep copy routine to Long datatype.
Signed-off-by: Ata E Husain Bohra <ata.husain@hotmail.com>
Update the ESX driver to use virReportError instead of
the ESX_ERROR & ESX_VI_ERROR custom macros
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It was broken since forever as it expected a libxml2
XML_ELEMENT_NODE containing a XML_TEXT_NODE instead of
just a XML_TEXT_NODE.
This problem was not discovered for so long because
esxVI_String_Deserialize was not used until now.
Reported by Ata Bohra
The two new APIs are rather trivial; based on bits and pieces of
other existing APIs. But rather than blindly return 0 or 1 for
HasMetadata, I chose to first validate that the snapshot in
question in fact exists.
* src/esx/esx_driver.c (esxDomainSnapshotIsCurrent)
(esxDomainSnapshotHasMetadata): New functions.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotIsCurrent)
(vboxDomainSnapshotHasMetadata): Likewise.
Blindly returning success is misleading if the object no longer
exists; it is a bit better to check for existence up front before
returning information about that object. This pattern matches the
fact that most of our other APIs check for existence as a side
effect prior to getting at the real piece of information being
queried.
* src/esx/esx_driver.c (esxDomainIsUpdated, esxDomainIsPersistent):
Add existence checks.
* src/vbox/vbox_tmpl.c (vboxDomainIsPersistent)
(vboxDomainIsUpdated): Likewise.
Appending an item to a list transfers ownership of that item to the
list owner. But an error can occur in between item allocation and
appending it to the list. In this case the item has to be freed
explicitly. This was not done in some special cases resulting in
possible memory leaks.
Reported by Coverity.
The current storage pools for NFS and iSCSI only require one host to
connect to. Future storage pools like RBD and Sheepdog will require
multiple hosts.
This patch allows multiple source hosts and rewrites the current
storage drivers.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When SASL requests auth credentials, try to look them up in the
config file first. If any are found, remove them from the list
that the user is prompted for
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the functions in virauth.h have names matching the file
prefix, by renaming virRequest{Username,Password} to
virAuthGet{Username,Password}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To follow latest naming conventions, rename src/util/authhelper.[ch]
to src/util/virauth.[ch].
* src/util/authhelper.[ch]: Rename to src/util/virauth.[ch]
* src/esx/esx_driver.c, src/hyperv/hyperv_driver.c,
src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update
for renamed include files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert drivers currently using the qparams APIs, to instead
use the virURIPtr query parameters directly.
* src/esx/esx_util.c, src/hyperv/hyperv_util.c,
src/remote/remote_driver.c, src/xenapi/xenapi_utils.c: Remove
use of qparams
* src/util/qparams.h, src/util/qparams.c: Delete
* src/Makefile.am, src/libvirt_private.syms: Remove qparams
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of just typedef'ing the xmlURIPtr struct for virURIPtr,
use a custom libvirt struct. This allows us to fix various
problems with libxml2. This initially just fixes the query vs
query_raw handling problems.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr
* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.
This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).
* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.
File changes:
- src/util/viruri.h -- declaration
- src/util/viruri.c -- definition
- src/libvirt_private.syms -- symbol export
- src/Makefile.am -- added source and header files
- cfg.mk -- added sc_prohibit_xmlURI
- all others -- ID name and include fixes
