They were added in qemu commit 7572150c189c6553c2448334116ab717680de66d
released in v0.14.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The Attach and Detach Lease functions were together in the middle of
the Detach functions. Put them at the end of their respective
sections, since they behave differently from the other attach/detach
functions (DetachLease doesn't use qemuDomainDeleteDevice(), and is
always synchronous).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There were two outliers at the end of the file beyond the Vcpu
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It was sitting down in the middle of all the qemuDomainDetach*()
functions. Move it up with the rest of the qemuDomain*Graphics*()
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's now only called from one place, and combining the two functions
highlights the similarity with Detach functions for other device
types.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Back in the bad old days different device types required a different
qemu monitor call to detach them, and so an <interface type='hostdev'>
needed to call the function for detaching hostdevs, while other
<interface> types could be deleted as netdevs.
Times have changed, and *all* device types are detached by calling the
common function qemuDomainDeleteDevice(vm, alias), so we don't need to
differentiate between hostdev interfaces and the others for that
reason.
There are a few other netdev-specific functions called during
qemuDomainDetachNetDevice() (clearing bandwidth limits, stopping the
interface), but those turn into NOPs when type=hostdev, so they're
safe to call for type=hostdev.
The only thing that is different + not a NOP is the call to
virDomainAudit*() when qemuDomainDeleteDevice() fails, so if we add a
conditional for that small bit of code, we can eliminate the callout
from qemuDomainDetachNetDevice() to qemuDomainDetachThisDevice(),
which makes this function fit the desired pattern for merging with the
other detach functions, and paves the way to simplifying
qemuDomainDetachHostDevice() too.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDiskDevice() is only called from one place. Moving the
contents of the function to that place makes
qemuDomainDetachDiskLive() more similar to the other Detach functions
called by the toplevel qemuDomainDetachDevice().
The goal is to make each of the device-type-specific functions do this:
1) find the exact device
2) do any device-specific validation
3) do general validation
4) do device-specific shutdown (only needed for net devices)
5) do the common block of code to send device_del to qemu, then
optionally wait for a corresponding DEVICE_DELETED event from
qemu.
with the final aim being that only items 1 & 2 will remain in each
device-type-specific function, while 3 & 5 (which are the same for
almost every type) will be de-duplicated and moved to the toplevel
function that calls all of these (qemuDomainDetachDeviceLive(), which
will also contain a callout to the one instance of (4) (netdev).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachHostDevice() has a check at the end that calls
qemuDomainDetachNetDevice() in the case that the hostdev is actually a
Net device of type='hostdev'. A long time ago when device removal was
(supposedly but not actually) synchronous, this would cause some extra
code to be run prior to removing the device (e.g. restoring the original MAC
address of the device, undoing some sort of virtual port profile, etc).
For quite awhile now the device removal has been asynchronous, so that
"extra teardown" isn't handled by the detach function, but instead is
handled by the Remove function called at a later time. The result is
that when we call qemuDomainDetachNetDevice() from
qemuDomainDetachHostDevice(), it ends up just calling
qemuDomainDetachThisHostDevice() and returning, which is exactly what
we do for all other hostdevs anyway.
Based on that, remove the behavioral difference when parent.type ==
VIR_DOMAIN_DEVICE_NET, and just call qemuDomainDetachThisHostDevice()
for all hostdevs.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There are separate Detach functions for PCI, USB, SCSI, Vhost, and
Mediated hostdevs, but the functions are all 100% the same code,
except that the PCI function checks for the guest side of the device
being a PCI Multifunction device, while the other 4 check that the
device's alias != NULL.
The check for multifunction PCI devices should be done for *all*
devices that are connected to the PCI bus in the guest, not just PCI
hostdevs, and qemuIsMultiFunctionDevice() conveniently returns false
if the queried device doesn't connect with PCI, so it is safe to make
this check for all hostdev devices. (It also needs to be done for many
other device types, but that will be addressed in a future patch).
Likewise, since all hostdevs are detached by calling
qemuDomainDeleteDevice(), which requires the device's alias, checking
for a valid alias is a reasonable thing for PCI hostdevs too.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Having an InfoPtr named "dev" made my brain hurt. Renaming it to
"info" gives one less thing to confuse when looking at the code.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
When support for hotplug/unplug of SCSI controllers was added way back
in December 2009 (commit da9d937b), unplug was handled by calling the
now-extinct function qemuMonitorRemovePCIDevice(), which required a
PCI address as an argument. At the same time, the idea of every device
in the config having a PCI address apparently was not yet fully
implemented, because the author of the patch including a check for a
valid PCI address in the device object.
These days, all PCI devices are guaranteed to have a valid PCI
address. But more important than that, we no longer detach devices by
PCI address, but instead use qemuDomainDeleteDevice(), which
identifies the device by its alias. So checking for a valid PCI
address is just pointless extra code that obscures the high level of
similarity between all the individual qemuDomainDetach*Device()
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainRemoveRNGDevice() calls qemuDomainDetachExtensionDevice().
According to commit 1d1e264f1 that added this code, it should not be
necessary to explicitly remove the zPCI extension device for a PCI
device during unplug, because "QEMU implements an unplug callback
which will unplug both PCI and zPCI device in a cascaded way". In
fact, no other devices call qemuDomainDetachExtensionDevice() during
their qemuDomainRemove*Device() function, so it should be removed from
qemuDomainRemoveRNGDevice as well.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
qemuDomainDetachControllerDevice() calls
qemuDomainDetachExtensionDevice() when the controller type is
PCI. This is incorrect in multiple ways:
* Any code that tears down a device should be in the
qemuDomainRemove*Device() function (which is called after libvirt
gets a DEVICE_DELETED event from qemu indicating that the guest is
finished with the device on its end. The qemuDomainDetach*Device()
functions should only contain code that ensures the requested
operation is valid, and sends the command to qemu to initiate the
unplug.
* qemuDomainDetachExtensionDevice() is a function that applies to
devices that plug into a PCI slot, *not* necessarily PCI controllers
(which is what's being checked in the offending code). The proper
way to check for this would be to see if the DeviceInfo for the
controller device had a PCI address, not to check if the controller
is a PCI controller (the code being removed was doing the latter).
* According to commit 1d1e264f1 that added this code (and other
support for hotplugging zPCI devices on s390), it's not necessary to
explicitly detach the zPCI device when unplugging a PCI device. To
quote:
There's no need to implement hot unplug for zPCI as QEMU
implements an unplug callback which will unplug both PCI and
zPCI device in a cascaded way.
and the evidence bears this out - all the other uses of
qemuDomainDetachExtensionDevice() (except one, which I believe is
also in error, and is being removed in a separate patch) are only to
remove the zPCI extension device in cases where it was successfully
added, but there was some other failure later in the hotplug process
(so there was no regular PCI device to remove and trigger removal of
the zPCI extension device).
* PCI controllers are not hot pluggable, so this is dead code
anyway. (The only controllers that can currently be
hotplugged/unplugged are SCSI controllers).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Now that the core of SnapshotObj is agnostic to snapshots and can be
shared with upcoming checkpoint code, it is time to rename the struct
and the functions specific to list operations. A later patch will
shuffle which file holds the common code. This is a fairly mechanical
patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Another step towards making the object list reusable for both
snapshots and checkpoints: the list code only ever needs items that
are in the common virDomainMomentDef base type. This undoes a lot of
the churn in accessing common members added in the previous patch, and
the bulk of the patch is mechanical. But there was one spot where I
had to unroll a VIR_STEAL_PTR to work around changed types.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Pull out the common parts of virDomainSnapshotDef that will be reused
for virDomainCheckpointDef into a new base class. Adjust all callers
that use the direct fields (some of it is churn that disappears when
the next patch refactors virDomainSnapshotObj; oh well...).
Someday, I hope to switch this type to be a subclass of virObject, but
that requires a more thorough audit of cleanup paths, and besides
minimal incremental changes are easier to review.
As for the choice of naming:
I promised my teenage daughter Evelyn that I'd give her credit for her
contribution to this commit. I asked her "What would be a good name
for a base class for DomainSnapshot and DomainCheckpoint". After
explaining what a base class was (using the classic OOB Square and
Circle inherit from Shape), she came up with "DomainMoment", which is
way better than my initial thought of "DomainPointInTime" or
"DomainPIT".
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
An upcoming patch will rework virDomainSnapshotObjList to be generic
for both snapshots and checkpoints; reduce the churn by adding a new
accessor virDomainSnapshotObjGetDef() which returns the
snapshot-specific definition even when the list is rewritten to
operate only on a base class, then using it at sites that that are
specific to snapshots. Use VIR_STEAL_PTR when appropriate in the
affected lines.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch finishes the job started in the previous patch, by getting
rid of all direct access to nchildren, first_child, or sibling outside
of the lowest level functions, making it easier to refactor later on.
The lone new caller to virDomainSnapshotObjListSize() checks for a
return != 0, because it wants to handles errors (-1, only possible if
the hash table wasn't allocated) and existing snapshots (> 0) in the
same manner; we can drop the check for a current snapshot on the
grounds that there shouldn't be one if there are no snapshots.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch starts the task with a single new function:
virDomainSnapshotMoveChildren(). The logic might not be immediately
obvious [okay, that's an understatement - the existing code uses black
magic ;-)], so here's an overview: The old code has an implicit for
loop around each call to qemuDomainSnapshotReparentChildren() by using
virDomainSnapshotForEachChild() (you'll need a wider context than
git's default of 3 lines to see that); the new code has a more visible
for loop. Then it helps if you realize that the code is making two
separate changes to each child object: STRDUP of the new parent name
prior to writing XML files (unchanged), and touching up the pointer to
the parent object (refactored); the end result is the same whether a
single pass made both changes (both in driver code), or whether it is
split into two passes making one change each (one in driver code, the
other in the new accessor).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It is easier to track the current snapshot as part of the list of
snapshots. In particular, doing so lets us guarantee that the current
snapshot is cleared if that snapshot is removed from the list (rather
than depending on the caller to do so, and risking a use-after-free
problem, such as the one recently patched in 1db9d0efbf). This
requires the addition of several new accessor functions, as well as a
useful return type for virDomainSnapshotObjListRemove(). A few error
handling sites that were previously setting vm->current_snapshot =
NULL can now be dropped, because the previous function call has now
done it already. Also, qemuDomainRevertToSnapshot() was setting the
current vm twice, so keep only the one used on the success path.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rework the logic in qemuDomainSnapshotLoad() to set
vm->current_snapshot only once at the end of the loop, rather than
repeatedly querying it during the loop, to make it easier for the next
patch to use accessor functions rather than direct manipulation of
vm->current_snapshot. When encountering multiple snapshots claiming
to be current (based on the presence of an <active>1</active> element
in the XML, which libvirt only outputs for internal use and not for
any public API), this changes behavior from warning only once and
running with no current snapshot, to instead warning on each duplicate
and selecting the last one encountered (which is arbitrary based on
readdir() ordering, but actually stands a fair chance of being the
most-recently created snapshot whether by timestamp or by the
propensity of humans to name things in ascending order).
Note that the code in question is only run by libvirtd when it first
starts, reading state from disk from the previous run into memory for
this run. Since the data resides somewhere that only libvirt should be
touching (typically /var/lib/libvirt/qemu/snapshot/*), it should be
clean. So in the common case, the code touched here is unreachable.
But if someone is actually messing with files behind libvirt's back,
they deserve the change in behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot. Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).
Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.
Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
And adjust virQEMUCapsSetList to use it. It will also be used in future
patches.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Storage source private data can be parsed along with other components of
private data rather than a separate function which is called from
multiple places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Set report=true for all enums currently formatted in the XML
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Only gic->supported needs an explicit BOOL_NO setting, all other
'supported' values are handling things correctly
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Switch most 'supported' handling to use virTristateBool, so eventually
we can handle the ABSENT state.
For now the XML formatter treats ABSENT the same as FALSE, so there's
no functional output change. This will be addressed in later patches
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This code originates from:
commit d0aa10fdd6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue Mar 3 12:03:44 2009 +0000
QEMU security driver usage for sVirt support (James Morris, Dan Walsh, Daniel Berrange)
Originally in the qemudDomainGetSecurityLabel function. It doesn't
appear to have done anything useful back then either. The other two
instances look like copy+paste
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object list code into its own file, and
update includes for affected clients.
This is just code motion, but done in preparation of sharing a lot of
the object list code with checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The functions do basically exactly the same thing modulo few checks.
In case of virtio disks we check that the device is not multifunction as
that can't be unplugged at once. In case of USB and SCSI disks we
checked that no active block job is running.
The check for running blockjobs should have also been done for virtio
disks. By moving the multifunction check into the common function we fix
this case and also simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the correct type in switch and populate the missing cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't have any cleanup section, we can return the value directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1623389
If a device is detached twice from the same domain the following
race condition may happen:
1) The first DetachDevice() call will issue "device_del" on qemu
monitor, but since the DEVICE_DELETED event did not arrive in
time, the API ends claiming "Device detach request sent
successfully".
2) The second DetachDevice() therefore still find the device in
the domain and thus proceeds to detaching it again. It calls
EnterMonitor() and qemuMonitorSend() trying to issue "device_del"
command again. This gets both domain lock and monitor lock
released.
3) At this point, qemu sends us the DEVICE_DELETED event which is
going to be handled by the event loop which ends up calling
qemuDomainSignalDeviceRemoval() to determine who is going to
remove the device from domain definition. Whether it is the
caller that marked the device for removal or whether it is going
to be the event processing thread.
4) Because the device was marked for removal,
qemuDomainSignalDeviceRemoval() returns true, which means the
event is to be processed by the thread that has marked the device
for removal (and is currently still trying to issue "device_del"
command)
5) The thread finally issues the "device_del" command, which
fails (obviously) and therefore it calls
qemuDomainResetDeviceRemoval() to reset the device marking and
quits immediately after, NOT removing any device from the domain
definition.
At this point, the device is still present in the domain
definition but doesn't exist in qemu anymore. Worse, there is no
way to remove it from the domain definition.
Solution is to note down that we've seen the event and if the
second "device_del" fails, not take it as a failure but carry on
with the usual execution.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
A caller might be interested in differentiating the cause for
error, especially if DeviceNotFound error occurred.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The aim of this function will be to fix return value of
qemuMonitorDelDevice() in one specific case. But that is yet to
come. Right now this is nothing but a plain substitution.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Any job which is able to provide statistics that can be queried via
virDomainGetJob{Stats,Info} has to set an appropriate statsType.
Without a proper statsType qemuDomainJobInfoToParams and
qemuDomainJobInfoToInfo have no idea what statistics should be sent to
the API caller.
https://bugzilla.redhat.com/show_bug.cgi?id=1688774
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
xenbus is virtual controller (akin to virtio controllers) for Xen
paravirtual devices. Although all Xen VMs have a xenbus, it has
never been modeled in libvirt, or in Xen native VM config format
for that matter.
Recently there have been requests to support Xen's max_grant_frames
setting in libvirt. max_grant_frames is best modeled as an attribute
of xenbus. It describes the maximum IO buffer space (or DMA space)
available in xenbus for use by connected paravirtual devices. This
patch introduces a new xenbus controller type that includes a
maxGrantFrames attribute.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Luckily, the function returns only 0 or -1 so all the checks work
as expected. Anyway, our rule is that a positive value means
success so if the function ever returns a positive value these
checks will fail. Make them check for a negative value properly.
At the same time fix qemuDomainDetachExtensionDevice() reval
check. It is somewhat related to the aim of this patch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The qemuFirmwareFetchConfigs() function is supposed to fetch all
firmware descriptions from paths defined by firmware.json
specification. This includes user's $HOME directory. However, it
was agreed that if libvirtd is running as privileged user then
his $HOME is ignored (thus $HOME is included in the search only
for regular users). Well, I got the condition wrong - it should
have been reversed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
snapshot_conf does all the hard work, the qemu driver just has to
accept the new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1564270
Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.
At the same time, introduce bunch of tests to test the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The firmware selection code will enable the feature if needed.
There's no need to require SMM to be enabled in that case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
And finally the last missing piece. This is what puts it all
together.
At the beginning, qemuFirmwareFillDomain() loads all possible
firmware description files based on algorithm described earlier.
Then it tries to find description which matches given domain.
The criteria are:
- firmware is the right type (e.g. it's bios when bios was
requested in domain XML)
- firmware is suitable for guest architecture/machine type
- firmware allows desired guest features to stay enabled (e.g.
if s3/s4 is enabled for guest then firmware has to support
it too)
Once the desired description has been found it is then used to
set various bits of virDomainDef so that proper qemu cmd line is
constructed as demanded by the description file. For instance,
secure boot enabled firmware might request SMM -> it will be
enabled if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implementation for yet another part of firmware description
specification. This one covers selecting which files to parse.
There are three locations from which description files can be
loaded. In order of preference, from most generic to most
specific these are:
/usr/share/qemu/firmware
/etc/qemu/firmware
$XDG_CONFIG_HOME/qemu/firmware
If a file is found in two or more locations then the most specific
one is used. Moreover, if file is empty then it means it is
overriding some generic description and disabling it.
Again, this is described in more details and with nice examples
in firmware.json specification (qemu commit 3a0adfc9bf).
However, there's one slight difference - for the root user the
home directory is not searched. This follows rules laid out by
similar look up processes, e.g. PKI x509 certs are not searched
in /root but they are looked for under /home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
