commit 77a12987a4 changed the "virDomainChrSourceDef source" inside
virDomainChrDef to "virDomainChrSourceDefPtr source", and started
allocating source inside virDomainChrDefNew(), but vboxDumpSerial()
was allocating a virDomainChrDef with a simple VIR_ALLOC() (i.e. never
calling virDomainChrDefNew()), so source was never initialized,
leading to a SEGV any time a serial port was present. The same problem
was created in vboxDumpParallel().
This patch changes vboxDumpSerial() and vboxDumpParallel() to use
virDomainChrDefNew() instead of VIR_ALLOC(), and changes both of those
functions to return an error if virDomainChrDef() (or any other
allocation) fails.
This resolves: https://bugzilla.redhat.com/1536649
Remove the unnecessary check as since commit id '46a811db07' it is
not possible to add or alter a filter using the same name, but with
a different UUID.
NB: It's not required to provide a UUID for a filter by name, but
if one is provided, then it must match the existing. If not provided,
then one is generated during ParseXML processing.
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use a switch statement instead of if-else-if statements. Move the
command line building of the iothread attribute into the common path
as the SCSI controller attributes are already validated.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Move the SATA controller check from command line building to
controller def validation. This includes copying the SATA
skip check found in qemuBuildSkipController.
Move the qemuCaps checks over to qemuDomainControllerDefValidatePCI.
This requires two test updates in order to set the correct capability
bit for an xml2xml test as well as setting up the similar capability
for the pseries memlocktest.
Excluding the qemuCaps checks, move the remainder of the checks
that validate whether the PCI definition is valid or not into
qemuDomainControllerDefValidatePCI.
Similar to the checking the modelName vs. NAME_NONE, let's make the
ModelNameTypeToString check more generic too within the checking done
in controller validation (with the same ignore certain models.
NB: We need to keep the ModelNameTypeToString fetch in command line
validation since we use it, but at least we can assume it returns
something valid now.
Move the various modelName == NAME_NONE from the command line
generation into domain controller validation. Also rather than
have multiple cases with the same check, let's make the code
more generic, but also note that it was the modelName option
that caused the failure. We also have to be sure not to check
the PCI models that we don't care about.
For the remaining checks in command line building, we can use
the field name in the error message to be more specific about
what causes the failure.
We format the 'chassis' and 'port' properties on the QEMU command
line later on, so we should make sure they've been set.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Move PCI validation checks out of qemu_command into the proper
qemu_domain validation helper.
Since there's a lot to move, we'll start slow by replicating the
pcie-root and pci-root avoidance from qemuBuildSkipController and
the first switch found in qemuBuildControllerDevStr.
Move SCSI validation from qemu_command into qemu_domain.
Rename/reorder the args in qemuCheckSCSIControllerIOThreads
to match the caller as well as fixing up the comments to
remove the previously removed qemuCaps arg.
Modify the SCSI controller switch during command line building
to account for all virDomainControllerModelSCSI types rather
than using the default label.
Move the checks that various attributes are not set on any controller
other than SCSI controller using virtio-scsi model into the common
controller validate checks.
Cachetune for unavailable vCPUs should be cleared the same way vcpupin and other
things do, so let's add tests for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some of the other functions depend on the fact that unused bits and longs are
always zero and it's less error-prone to clear it than fix the other functions.
It's enough to zero out one piece of the map since we're calling realloc() to
get rid of the rest (and updating map_len).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1540817
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The position of various parameters changes depending on the WITH_GNUTLS
macro.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we annotate the APIs are having non-NULL parameters, we can remove
the checks for NULL in the code too.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Validate that the virNetServer(Client) RPC APIs are processing the
private data callbacks correctly by passing in non-NULL pointers.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1461214
Since fec8f9c49a we try to use predictable file names for
'memory-backend-file' objects. But that made us provide full path
to qemu when hot plugging the object while previously we provided
merely a directory. But this makes qemu behave differently. If
qemu sees a path terminated with a directory it calls mkstemp()
and unlinks the file immediately. But if it sees full path it
just calls open(path, O_CREAT ..); and never unlinks the file.
Therefore it's up to libvirt to unlink the file and not leave it
behind.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In my first approach in 4b480d1076 I overlooked the comment in
qemuMigrationRunIncoming stating that during actual migration the
qemuMigrationRunIncoming does not wait until the migration is complete
but rather offloads that to the Finish phase of migration.
This means that during actual migration qemuProcessRefreshState was
called prior to qemu actually transferring the full state and thus the
queries did not get the correct information. The approach worked only
for restore, where we wait for the migration to finish during qemu
startup.
Fix the issue by calling qemuProcessRefreshState both from
qemuProcessStart if there's no incomming migration and from
qemuMigrationFinish so that the code actually works as expected.
In 2074ef6cd4 and c56cdf259 (and friends) we've added two
attributes to virtio NICs: rx_queue_size and tx_queue_size.
However, sysadmins might want to set these on per-host basis but
don't necessarily have an access to domain XML (e.g. because they
are generated by some other app). So let's expose them under
qemu.conf (the settings from domain XML still take precedence as
they are more specific ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit id 'bc444666f' added a check if the returned data
buffer had an error, but failed to adjust the event from
VIR_DOMAIN_BLOCK_JOB_COMPLETED to VIR_DOMAIN_BLOCK_JOB_FAILED
in order to propagate an error such as "File descriptor in bad
state" that may be returned from QEMU when both @offset and
@len are set to 0 such as is the case when performing an async
block job read on a read only filesystem.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the DEVICE_MISSING error code when helpers fail to find
the requested device. This makes it easier for consumers to
key off the error code rather than the error message.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Modify OPERATION_FAILED and INTERNAL_ERROR error codes to
use DEVICE_MISSING instead for failures associated with the
inability to find the device. This makes it easier for consumers
to key off the error code rather than the error message.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add new error code to be able to allow consumers (such as Nova) to be
able to key of a specific error code rather than needing to search the
error message."
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that we can open connections to the secondary drivers on demand,
there is no need to pass a virConnectPtr into all the backend
functions.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of passing around a virConnectPtr object, just open a connection
to the nodedev driver at time of use. Opening connections on demand will
be beneficial when the nodedev driver is in a separate daemon. It also
solves the problem that a number of callers just pass in a NULL
connection today which prevents nodedev lookup working at all.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of passing around a virConnectPtr object, just open a connection
to the secret driver at time of use. Opening connections on demand will
be beneficial when the secret driver is in a separate daemon. It also
solves the problem that a number of callers just pass in a NULL
connection today which prevents secret lookup working at all.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Various parts of libvirt will want to open connections to secondary
drivers. The right URI to use will depend on the context, so rather than
duplicating that logic in various places, use some helper APIs. This
will also make it easier for us to later pre-open/cache connections to
avoid repeated opening & closing the same connectiong during autostart.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the secret
driver, by defining secret:///system and secret:///session URIs
and registering a fake hypervisor driver that supports them.
The hypervisor drivers can now directly open a secret driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the nodedev
driver, by defining nodedev:///system and nodedev:///session URIs
and registering a fake hypervisor driver that supports them.
The hypervisor drivers can now directly open a nodedev driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the interface
driver, by defining interface:///system and interface:///session URIs
and registering a fake hypervisor driver that supports them.
The hypervisor drivers can now directly open a interface driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the storage
driver, by defining a nwfilter:///system URI and registering a fake
hypervisor driver that supports it.
The hypervisor drivers can now directly open a nwfilter driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the network
driver, by defining network:///system and network:///session URIs
and registering a fake hypervisor driver that supports them.
The hypervisor drivers can now directly open a network driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By convention the last thing in the driver.c files should be the driver
callback table and function to register it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the storage
driver, by defining storage:///system and storage:///session URIs
and registering a fake hypervisor driver that supports them.
The hypervisor drivers can now directly open a storage driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By convention the last thing in the driver.c files should be the driver
callback table and function to register it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some platforms/toolchains will complain about casting
sockaddr_storage to sockaddr_un because it breaks strict
aliasing rule
../../src/util/virutil.c: In function 'virGetUNIXSocketPath':
../../src/util/virutil.c:2005: error: dereferencing pointer 'un' does break strict-aliasing rules [-Wstrict-aliasing]
Change the code to use a union, in the same way that the
virsocketaddr.h header does.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
"ln" will not replace an existing symlink, so if you run 'make install'
twice, the second time will get an error:
ln: failed to create symbolic link 'virsh': File exists
We must always remove the symlink target first.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the controller model is updated during post parse callback,
this code no longer needs to fetch the model based on the capabilities
and can just return the model directly if the controller is found.
Removal of @qemuCaps cascades through various callers which are now
updated to not pass the capabilities.
